aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/block/dasd.c
Commit message (Collapse)AuthorAgeFilesLines
* [S390] dasd: prevent IO error during reserve/release loopStefan Haberland2011-05-101-1/+10
| | | | | | | | | The termination of running CQR caused by reserve/release operations may lead to an IO error if reserve/release is done in a tight loop. Prevent this by increasing the retry counter after termination. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix race between open and offlineStefan Weinhuber2011-04-201-18/+22
| | | | | | | | | | | | | | | | | | The dasd_open function uses the private_data pointer of the gendisk to find the dasd_block structure that matches the gendisk. When a DASD device is set offline, we set the private_data pointer of the gendisk to NULL and later remove the dasd_block structure, but there is still a small race window, in which dasd_open could first read a pointer from the private_data field and then try to use it, after the structure has already been freed. To close this race window, we will store a pointer to the dasd_devmap structure of the base device in the private_data field. The devmap entries are not deleted, and we already have proper locking and reference counting in place, so that we can safely get from a devmap pointer to the dasd_device and dasd_block structures of the device. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* block: remove per-queue pluggingJens Axboe2011-03-101-1/+1
| | | | | | | | Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* [S390] dasd: Correct retry counter for terminated I/O.Stefan Haberland2011-01-051-1/+0
| | | | | | | | | In case the DASD driver needs to term a running I/O the retry counter is decreased twice. Remove the unnecessary retry counter decrease in das_term_IO. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: Add support for raw ECKD access.Stefan Haberland2011-01-051-3/+20
| | | | | | | | | | Normal I/O operations through the DASD device driver give only access to the data fields of an ECKD device even for track based I/O. This patch extends the DASD device driver to give access to whole ECKD tracks including count, key and data fields. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: Prevent deadlock during suspend/resume.Stefan Haberland2011-01-051-3/+4
| | | | | | | | | | | The freeze callback may set a stop bit so that a worker thread could not start I/O. The discipline specific freeze function waits for the worker to be completed. Set the stop_bit after the discipline specific freeze function has returned and no worker is running. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: Improve handling of stolen DASD reservationStefan Weinhuber2011-01-051-32/+43
| | | | | | | | | | | | If a DASD device has been reserved by a Linux system, and later this reservation is ‘stolen’ by a second system by means of an unconditional reserve, then the first system receives a notification about this fact. With this patch such an event can be either ignored, as before, or it can be used to let the device fail all I/O request, so that the device will not block anymore. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: do path verification for paths added at runtimeStefan Weinhuber2011-01-051-44/+158
| | | | | | | | | | When a new path is added at runtime, the CIO layer will call the drivers path_event callback. The DASD device driver uses this callback to trigger a path verification for the new path. The driver will use only those paths for I/O, which have been successfully verified. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: add High Performance FICON multitrack supportStefan Weinhuber2011-01-051-4/+0
| | | | | | | | | | Some storage systems support multitrack High Performance FICON requests, which read or write data to more than one track. This patch enables the DASD device driver to generate multitrack High Performance FICON requests. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: add support for irq statisticsHeiko Carstens2011-01-051-0/+2
| | | | | | | Add support for DASD I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: ignore unsolicited interrupts for DIAGStefan Haberland2010-10-251-9/+14
| | | | | | | | | | | | For the DASD DIAG discipline IO is started through special diagnose calls. Unsolicited interrupts may contain information about the device itself. But this information is not needed because the device is not used directly. Fix the case that an unimplemented dicipline function may be called by ignoring unsolicited interrupts for the DIAG disciplin. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix unsolicited interrupt recognitionStefan Weinhuber2010-10-251-1/+10
| | | | | | | | | | | | | | | The dasd interrupt handler needs to distinguish solicited from unsolicited interrupts, as unsolicited interrupts may require special handling (e.g. summary unit checks) and solicited interrupts require proper error recovery for the failed I/O request. The interrupt handler needs to check several bit fields in the interrupt response block (irb) to make this distinction. So far our check of the status control bits has not been specific enough, which may lead to a failed request getting just retried instead of the necessary error recovery. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-10-221-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits) xen-blkfront: disable barrier/flush write support Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c block: remove BLKDEV_IFL_WAIT aic7xxx_old: removed unused 'req' variable block: remove the BH_Eopnotsupp flag block: remove the BLKDEV_IFL_BARRIER flag block: remove the WRITE_BARRIER flag swap: do not send discards as barriers fat: do not send discards as barriers ext4: do not send discards as barriers jbd2: replace barriers with explicit flush / FUA usage jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier jbd: replace barriers with explicit flush / FUA usage nilfs2: replace barriers with explicit flush / FUA usage reiserfs: replace barriers with explicit flush / FUA usage gfs2: replace barriers with explicit flush / FUA usage btrfs: replace barriers with explicit flush / FUA usage xfs: replace barriers with explicit flush / FUA usage block: pass gfp_mask and flags to sb_issue_discard dm: convey that all flushes are processed as empty ...
| * block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()Tejun Heo2010-09-101-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with -EOPNOTSUPP and blk_queue_ordered() is replaced with simpler blk_queue_flush(). blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a device has write cache and can flush it, it should set REQ_FLUSH. If the device can handle FUA writes, it should also set REQ_FUA. All blk_queue_ordered() users are converted. * ORDERED_DRAIN is mapped to 0 which is the default value. * ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH. * ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | s390/block: kill the big kernel lockArnd Bergmann2010-09-261-6/+0
|/ | | | | | | | | | | | The dasd and dcssblk drivers gained the big kernel lock in the recent pushdown from the block layer, but they don't really need it, so remove the calls without a replacement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org
* [S390] dasd: fix format string typesHeiko Carstens2010-08-131-2/+2
| | | | | | | | | | | Get rid of these warnings: drivers/s390/block/dasd.c: In function '__dasd_device_check_expire': drivers/s390/block/dasd.c:1330: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' drivers/s390/block/dasd.c:1337: warning: format '%i' expects type 'int', but argument 4 has type 'long unsigned int' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* block: push down BKL into .open and .releaseArnd Bergmann2010-08-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: remove q->prepare_flush_fn completelyFUJITA Tomonori2010-08-071-1/+1
| | | | | | | | | This removes q->prepare_flush_fn completely (changes the blk_queue_ordered API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* [S390] dasd: unit check handling during internal cio I/OStefan Haberland2010-05-261-0/+23
| | | | | | | | React on unit checks during cio internal I/O. Handle as unsolicited interrupt and advice cio to retry. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: add dynamic pav tolerationStefan Haberland2010-05-171-0/+22
| | | | | | | | | | | | For base Parallel Access Volume (PAV) there is a fixed mapping of base and alias devices. With dynamic PAV this mapping can be changed so that an alias device is used with another base device. This patch enables the DASD device driver to tolerate dynamic PAV changes. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix race between tasklet and dasd_sleep_onStefan Weinhuber2010-05-121-7/+10
| | | | | | | | | | | | | | | | | | The various dasd_sleep_on functions use a global wait queue when waiting for a cqr. The wait condition checks the status and devlist fields of the cqr to determine if it is safe to continue. This evaluation may return true, although the tasklet has not finished processing of the cqr and the callback function has not been called yet. When the callback is finally called, the data in the cqr may already be invalid. The sleep_on wait condition needs a safe way to determine if the tasklet has finished processing. Use the callback_data field of the cqr to store a token, which is set by the callback function itself. Cc: <stable@kernel.org> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix endless loop in erpStefan Haberland2010-04-221-1/+2
| | | | | | | | | If not enough memory is available to build a new erp request it ended up in an endless loop trying to build erp requests. Fixed the loop to proceed the next request instead. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: automatic recognition of read-only devicesStefan Weinhuber2010-03-081-0/+36
| | | | | | | | | | In z/VM it is possible to attach a device as read-only. To prevent unintentional write requests and subsequent I/O errors, we can detect this configuration using the z/VM DIAG 210 interface and set the respective linux block device to read-only as well. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-2.6.34' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-03-011-3/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block: (38 commits) block: don't access jiffies when initialising io_context cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds block: fix for "Consolidate phys_segment and hw_segment limits" cfq-iosched: quantum check tweak blktrace: perform cleanup after setup error blkdev: fix merge_bvec_fn return value checks cfq-iosched: requests "in flight" vs "in driver" clarification cciss: Fix problem with scatter gather elements in the scsi half of the driver cciss: eliminate unnecessary pointer use in cciss scsi code cciss: do not use void pointer for scsi hba data cciss: factor out scatter gather chain block mapping code cciss: fix scatter gather chain block dma direction kludge cciss: simplify scatter gather code cciss: factor out scatter gather chain block allocation and freeing cciss: detect bad alignment of scsi commands at build time cciss: clarify command list padding calculation cfq-iosched: rethink seeky detection for SSDs cfq-iosched: rework seeky detection block: remove padding from io_context on 64bit builds block: Consolidate phys_segment and hw_segment limits ...
| * block: Consolidate phys_segment and hw_segment limitsMartin K. Petersen2010-02-261-2/+1
| | | | | | | | | | | | | | | | | | Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen2010-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | [S390] dasd: correct offline processingStefan Haberland2010-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | Flushing the dasd ccw request queue may stop the processing of the block device request queue. Destroy partitions may wait for outstanding requests and thus hang. Swapping dasd_destroy_partitions and dasd_flush_request_queue so that the request queue is empty before dasd_destroy_partitions is called. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: fix refcounting.Stefan Haberland2010-02-261-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | The function dasd_device_from_cdev returns a reference to the dasd device and increases the refcount by one. If an exception occurs, the refcount was not decreased in all cases e.g. in dasd_discipline_show. Prevent the offline processing from hang by correcting two functions to decrease the refcount even if an error occured. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] dasd: fix online/offline raceStefan Haberland2010-02-261-8/+14
|/ | | | | | | | | | | | | | Setting a DASD online and offline in quick succession may cause a kernel panic or let the chhccwdev command wait forever. The Online process is split into two parts. After the first part is finished the offline process may be called. This may result in a situation where the second online processing part tries to set the DASD offline as well. Use a mutex to protect online and offline against each other. Also correct some checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix possible NULL pointer errorsStefan Haberland2010-01-271-4/+4
| | | | | | | | Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: remove strings from s390dbfStefan Haberland2009-12-071-11/+11
| | | | | | | | | Remove strings from s390 debugfeature entries that could lead to a crash when the data is read from dbf because the strings do not exist any more. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: improve error recovery for internal I/OStefan Weinhuber2009-12-071-55/+152
| | | | | | | | | | | | | | | | | | | Most of the error conditions reported by a FICON storage server indicate situations which can be recovered. Sometimes the host just needs to retry an I/O request, but sometimes the recovery is more complex and requires the device driver to wait, choose a different path, etc. The DASD device driver has a fully featured error recovery for normal block layer I/O, but not for internal I/O request which are for example used during the device bring up. This can lead to situations where the IPL of a system fails because DASD devices are not properly recognized. This patch will extend the internal I/O handling to use the existing error recovery procedures. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: remove dead codeChristian Borntraeger2009-12-071-1/+0
| | | | | | | the todclk.h header file is dead code. Remove it. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cio: split PGID settings and statusPeter Oberparleiter2009-12-071-7/+0
| | | | | | | | | | | Split setting (driver wants feature enabled) and status (feature setup was successful) for PGID related ccw device features so that setup errors can be detected. Previously, incorrectly handled setup errors could in rare cases lead to erratic I/O behavior and permanently unusuable devices. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: use idal for device characteristicsStefan Haberland2009-10-141-2/+11
| | | | | | | | | If the rdc_buffer is above 2G we need indirect addresssing so we have to use an idaw to give the rdc_buffer to the ccw. If the rdc_buffer is under 2G nothing changes. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix race condition in resume codeStefan Haberland2009-10-061-2/+3
| | | | | | | | | | | | | | | | There is a race while re-reading the device characteristics. After cleaning the memory area a cqr is build which reads the device characteristics. This may take a rather long time and the device characteristics structure is zero during this. Now it could be possible that the block tasklet starts working and a new cqr will be build. The build_cp command refers to the device characteristics structure and this may lead into a divide by zero exception. Fix this by re-reading the device characteristics into a temporary structur and copy the data to the original structure. Also take the ccwdev_lock. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* const: make block_device_operations constAlexey Dobriyan2009-09-221-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] dasd: optimize cpu usage in goodcaseStefan Haberland2009-09-111-13/+8
| | | | | | | remove unnecessary dbf call, remove string operations for magic Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fail requests when device state is less then readyStefan Weinhuber2009-09-111-1/+4
| | | | | | | | | A DASD device that is not ready or online has no defined disk layout, so all requests that arrive in such a state need to be returned as failed. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] drivers/s390: put NULL test before dereferenceJulia Lawall2009-08-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | If the NULL test on block is needed, it should be before the dereference of the base field. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression E1,E2; identifier fld; statement S1,S2; @@ E1 = E2->fld; ( if (E1 == NULL) S1 else S2 | *if (E2 == NULL) S1 else S2 ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: fix refcounting in dasd_change_stateSebastian Ott2009-06-221-3/+5
| | | | | | | | | | | | | | | | | | To set a dasd online dasd_change_state is called twice. The first cycle will schedule initial analysis of the device, set the rc to -EAGAIN and will not touch the device state any more. The initial analysis will in turn call dasd_change_state to increase the state to the final DASD_STATE_ONLINE. If the dasd_change_state on the second thread outruns the other one both finish with the state set to DASD_STATE_ONLINE and the device refcount will be decreased by 2. Fix this by leaving dasd_change_state on rc == -EAGAIN so that the refcount will always be decreased by 1. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd_pm: fix stop flag handlingStefan Haberland2009-06-221-1/+11
| | | | | | | | The stop flags are handled in the generic restore function so the stop flag is removed also for FBA and DIAG devices. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] pm: dasd power management callbacks.Stefan Haberland2009-06-161-2/+107
| | | | | | | | | | | | | | Introduce the power management callbacks to the dasd driver. On suspend the dasd devices are stopped and removed from the focus of alias management. On resume they are reinitialized by rereading the device characteristics and adding the device to the alias management. In case the device has gone away during suspend it will caught in the suspend state with stopped flag set to UNRESUMED. After it appears again the restore function is called again. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: forward internal errors to dasd_sleep_on callerStefan Weinhuber2009-06-121-6/+24
| | | | | | | | | | | If a DASD requests is started with dasd_sleep_on and fails, then the calling function may need to know the reason for the failure. In cases of hardware errors it can inspect the sense data in the irb, but when the reason is internal (e.g. start_IO failed) then it needs a meaningfull return code. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] dasd: check_characteristics cleanupSebastian Ott2009-06-121-2/+2
| | | | | | | | Fix a broken memset (sizeof pointer vs sizeof the underlying structure) by cleaning up the involved functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* block: Do away with the notion of hardsect_sizeMartin K. Petersen2009-05-221-1/+1
| | | | | | | | | | | | | | Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: implement and enforce request peek/start/fetchTejun Heo2009-05-111-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: convert to pos and nr_sectors accessorsTejun Heo2009-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: implement and use [__]blk_end_request_all()Tejun Heo2009-04-281-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mike Miller <mike.miller@hp.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
* [S390] dasd: Use the new async framework for autoonlining.Cornelia Huck2009-04-141-12/+25
| | | | | | | | | | | | | | The dasd driver can automatically online detected dasds, which especially important for finding the root device. Currently, it will wait for each online operation to finish individually, which may take long if many dasds need to be onlined. When using the new async framework, these onlining operations can run in parallel and presence of the root device is ensured by the fact that prepare_namespace() waits for all async threads to finish. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.1 at 2024-05-11 06:08:12 +0000