aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio/qdio_main.c
Commit message (Collapse)AuthorAgeFilesLines
* [S390] qdio: Split SBAL entry flagsJan Glauber2011-06-061-3/+3
| | | | | | | | | | | | | The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent compile warningJan Glauber2011-05-231-1/+1
| | | | | | | | | | | Prevent the following compile warning for !CONFIG_64BIT: CC drivers/s390/cio/qdio_main.o drivers/s390/cio/qdio_main.c: In function ‘handle_outbound’: drivers/s390/cio/qdio_main.c:1449: warning: ‘state’ may be used uninitialized in this function Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: reset error states immediatelyJan Glauber2011-04-201-5/+12
| | | | | | | | | | | The qdio hardware may surpress further interrupts as long as a SBAL is in the error state. That can lead to unnotified data in the SBALs following the error state. To prevent this behaviour change the SBAL[s] in error state immediately to another program owned state so interrupts are again received for further traffic on the device. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: fix init sequenceSebastian Ott2011-04-041-8/+8
| | | | | | | | | Reorder the initialization sequence of the qdio module to avoid writing to an uninitialized debug feature entry. Also reorder the exit function to restore a consistent cleanup path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent handling of buffers if count is zeroJan Glauber2011-03-231-1/+2
| | | | | | | | Exit do_QDIO early if the buffer count is zero to prevent side effects in the following functions. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent compile warning under CONFIG_32BITJan Glauber2011-01-311-2/+2
| | | | | | | | | | | | | | | Prevent the following compiler warning if compiling a 31 bit kernel: drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’: drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function CC lib/radix-tree.o CC drivers/s390/scsi/zfcp_cfdc.o drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’: drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: cleanup SIGA syncJan Glauber2011-01-051-35/+29
| | | | | | | | Simplify the SIGA sync code and add unlikely annotations. In polling mode SBALs may be accessed without interrupt, so call SIGA sync before every scan. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: remove enhanced SIGAJan Glauber2011-01-051-42/+15
| | | | | | | | | | HiperSocket devices only use one SBAL per qdio call without the enhanced SIGA feature. Since that feature is currently not used remove it from the qdio code so the compiler can generate better code for the HiperSocket outbound path. While at it mark the SIGA error conditions as unlikely. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: use proper QEBSM operand for SIGA-R and SIGA-SJan Glauber2011-01-051-15/+28
| | | | | | | | | | | If QIOASSIST is enabled for a qdio device the SIGA instruction requires a modified function code. This function code modifier was missing for SIGA-R and SIGA-S which can lead to a kernel panic caused by an operand exception. Cc: stable@kernel.org Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: outbound queue full counterJan Glauber2011-01-051-0/+3
| | | | | | | Add a counter for outbound queue full events to the qdio statistics. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: outbound tasklet scan thresholdJan Glauber2011-01-051-1/+7
| | | | | | | | | | | | | | | | | | Introduce a scan treshold for the qdio outbound queues. By setting the threshold the driver can tell qdio after how much used SBALs qdio should schedule the outbound tasklet that scans the queue for finished SBALs. The threshold is specific by the drivers because a Hipersockets device is much faster in utilizing outbound buffers than a ZFCP or OSA device. The default values after how many used SBALs the tasklet should run are: OSA: > 31 SBALs Hipersockets: > 7 SBALs zfcp: > 55 SBALs Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent race for shared indicatorsJan Glauber2011-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the shared indicator is used the following race leads to an inbound stall: Device CPU0 CPU1 ======================================================== non-shared DSCI =>1 ALSI => 1 Thin INT ALSI => 0 non-shared DSCI tasklets scheduled shared DSCI => 1 ALSI => 1 shared DSCI => 0 ALSI ? -> set Thin INT ALSI => 0 ALSI was set, shared DSCI => 1 After that no more interrupts occur because the DSCI is still set. Fix that race by only resetting the shared DSCI if it was actually set so the tasklets for all shared devices are scheduled and will run after the interrupt. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: add qdio interrupts to interrupt statisticsJan Glauber2011-01-051-0/+2
| | | | | | | | Count traditional qdio interrupts and adapter interrupts for qdio in the interrupt statistics. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* qdio: extend API to allow pollingJan Glauber2010-09-081-2/+136
| | | | | | | | | | | | | | | | | | | | | | Extend the qdio API to allow polling in the upper-layer driver. This is needed by qeth to use NAPI. To use the new interface the upper-layer driver must specify the queue_start_poll(). This callback is used to signal the upper-layer driver that is has initiative and must process the inbound queue by calling qdio_get_next_buffers(). If the upper-layer driver wants to stop polling it calls qdio_start_irq(). Since adapter interrupts are not completely stoppable qdio implements a software bit QDIO_QUEUE_IRQS_DISABLED to safely disable interrupts for an input queue. The old interface is preserved and will be used as is by zfcp. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [S390] qdio: remove API wrappersJan Glauber2010-05-171-46/+0
| | | | | | | | Remove qdio API wrappers used by qeth and replace them by calling the appropriate functions directly. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: dont convert timestamps to microsecondsJan Glauber2010-05-171-4/+4
| | | | | | | | Don't convert timestamps to microseconds, use timestamps returned by get_clock() directly. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent starvation on PCI devicesJan Glauber2010-05-171-3/+7
| | | | | | | | | | | If adapter interrupts are not available and traditional IO interrupts are used for qdio the inbound tasklet continued to run if new data arrived. That could possibly block other tasklets scheduled on the same CPU. If new data arrives schedule the tasklet again instead of directly processing the new data. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: count number of qdio interruptsJan Glauber2010-05-171-0/+3
| | | | | | | Add missing increment for the qdio interrupt counter. Signed-off-by: Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [S390] qdio: add missing bracketUrsula Braun2010-03-081-1/+2
| | | | | | | | | Add a missing bracket to only log the outbound handler event in the appropriate case. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add MACHINE_IS_LPAR flagMartin Schwidefsky2010-02-261-1/+1
| | | | | | | Introduce the MACHINE_IS_LPAR flag for code that should only be executed if Linux is running in an LPAR. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: account processed SBAL during queue scanJan Glauber2010-02-261-0/+26
| | | | | | | | | | | | | | Add counters for the number of processed SBALs. The numbers summarize how many SBALs were processed at each queue scan and indicate the utilization of the queue. Furthermore the number of unsuccessfull queue scans, SBAL errors and the total number of processed SBALs are accounted. Also regroup struct qdio_q to move read-mostly and write-mostly data into different cachelines. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: prevent call trace if CHPID is offlineJan Glauber2010-02-091-0/+2
| | | | | | | | | | | | If a CHPID is offline during a device shutdown the ccw_device_halt|clear may fail and the qdio device stays in state STOPPED until the shutdown is finished. If an interrupt occurs before the device is set to INACTIVE the STOPPED state triggers a WARN_ON in the interrupt handler. Prevent this WARN_ON by catching the STOPPED state in the interrupt handler. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: continue polling for buffer state ERRORUrsula Braun2010-02-091-1/+1
| | | | | | | | | | | | Inbound traffic handling may hang if next buffer to check is in state ERROR, polling is stopped and the final check for further available inbound buffers disregards buffers in state ERROR. This patch includes state ERROR when checking availability of more inbound buffers. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: convert global statistics to per-device statsJan Glauber2010-01-041-38/+33
| | | | | | | | | | | | | | Revamp the qdio performance statistics and move them from procfs to debugfs using the seq_file interface. Since the statistics are not intended for the general user the removal of /proc/qdio_perf should not surprise anyone. The per device statistics are disabled by default, writing 1 to /<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the statistics for the given device. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: add counter for input queue full conditionJan Glauber2009-12-181-1/+2
| | | | | | | | | | Add a counter to the qdio performance statistics that indicates that no free buffers were left in the input queue. If the counter gets increased it means that the qdio adapter filled all available buffers and possibly had more buffers ready but could not transmit them. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: change state of all primed input buffersJan Glauber2009-09-221-0/+2
| | | | | | | | | | | | If input buffers stay in primed state qdio may not receive further interrupts for the input queue depending on the firmware. That can cause a connection hang on OSA cards. Change the state of all primed input buffers that are not acknowledged to not initialized. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: reduce per device debug messagesJan Glauber2009-09-221-18/+12
| | | | | | | | | Even if turned off the debug message overhead is measurable in the hot path. Reduce the number of debug message calls in do_QDIO and qdio_kick_handler. Also use hex numbers to save space in the debug entries. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: continue polling if the queue is not finishedJan Glauber2009-09-111-1/+3
| | | | | | | | | | | With commit c38f96080955854e54df9cb392bc674e1ae330e1 polling was stopped for the queue even if new data is available. Return immediately after scheduling the queue tasklet if the queue is not done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: Sanitize do_QDIO sanity checksJan Glauber2009-06-221-7/+2
| | | | | | | | | | Remove unneeded sanity checks from do_QDIO since this is the hot path. Change the type of bufnr and count to unsigned int so the check for the maximum value works. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: leave inbound SBALs primedJan Glauber2009-06-221-7/+0
| | | | | | | | It is not required to change the state of primed SBALs. Leaving them primed saves a SQBS instruction under z/VM. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: extract all primed SBALs at onceJan Glauber2009-06-221-28/+6
| | | | | | | | | For devices without QIOASSIST primed SBALS were extracted in a loop. Remove the loop since get_buf_states can already return more than one primed SBAL. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: fix check for running under z/VMJan Glauber2009-06-221-35/+13
| | | | | | | | | | | The check whether qdio runs under z/VM was incorrect since SIGA-Sync is not set if the device runs with QIOASSIST. Use MACHINE_IS_VM instead to prevent polling under z/VM. Merge qdio_inbound_q_done and tiqdio_is_inbound_q_done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: move adapter interrupt tasklet codeJan Glauber2009-06-221-12/+72
| | | | | | | | Move the adapter interrupt tasklet function to the qdio main code since all the functions used by the tasklet are located there. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qsRoel Kluin2009-06-121-1/+1
| | | | | | | Do not go beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: simplify error handling in irq handlerJan Glauber2009-06-121-32/+12
| | | | | | | | | The check for the device status in qdio_establish_handle_irq() had dead code. Remove the unused code and simplify the error handling. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: remove dead timeout handlerJan Glauber2009-04-141-41/+2
| | | | | | | | | | | The QDIO ccw devices are started by ccw_device_start so no timeout can occur for the interrupt handler. Remove the dead code. In case of an I/O error set the device state to error and wake up a possibly running qdio_shutdown waiter. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: merge inbound and outbound handler functionsJan Glauber2009-03-261-43/+19
| | | | | | | | | The inbound and outbound handlers are nearly identical if the outbound handler uses first_to_check as end index instead of last_move. Since both values are identical at that point the handlers can be merged. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: report SIGA errors directlyJan Glauber2009-03-261-43/+30
| | | | | | | | | | | | | | | Errors from SIGA instructions are stored in the per queue qdio_error and reported back when the queue handler is called. That opens a race when multiple error conditions occur simultanously. Report SIGA errors immediately in the return value of do_QDIO so the upper layer can react and SIGA errors no longer interfere with other errors. Move the SIGA error handling in qeth from the outbound handler to qeth_flush_buffers. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
* [S390] qdio: seperate last move index and polling indexJan Glauber2009-03-261-21/+17
| | | | | | | | | | The index value that indicated that the input queue moved was also used to store the index of the first acknowledged buffer. For non-qebsm only the newest buffer is acknowledged which may be different from the last move index so two seperate values are needed to track the input queue. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: move ACK to newest buffer for devices without QEBSMJan Glauber2009-03-261-5/+8
| | | | | | | | The ACKnowledgement state should be set on the newest SBAL so an adapter interrupt surpression check needs to scan fewer SBALs. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: call qdio_free also if qdio_shutdown failsJan Glauber2009-03-261-4/+5
| | | | | | | | | | | qdio_cleanup is a wrapper function that should call qdio_shutdown and qdio_free. qdio_free was not called if an error occured in qdio_shutdown resulting in a missing free of allocated resources. Call qdio_free regardless of the return value of qdio_shutdown. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: proper kill of qdio taskletsJan Glauber2009-03-261-11/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: Dont call qdio_shutdown in case qdio_activate failsJan Glauber2009-03-261-3/+2
| | | | | | | | | Remove the call to qdio_shutdown from qdio_activate since the upper-layer drivers are responsible to call qdio_shutdown when qdio_activate returns with an error. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: add missing tiq_list lockingJan Glauber2009-03-261-0/+1
| | | | | | | | | | Add a mutex to protect the tiq_list. Although reading the list is done using RCU adding and removing elements from the list must still happen locked since multiple qdio devices may change the list in parallel otherwise. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* fix similar typos to successfullColy Li2009-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] qdio: fix error reporting for hipersocketsJan Glauber2008-12-251-96/+54
| | | | | | | | | | | | | | | | Hipersocket connections can encounter temporary busy conditions. In case of the busy bit set we retry the SIGA operation immediatelly. If the busy condition still persists after 100 ms we fail and report the error to the upper layer. The second stage retry logic is removed. In case of ongoing busy conditions the upper layer needs to reset the connection. The reporting of a SIGA error is now done synchronously to allow the network driver to requeue the buffers. Also no error trace is created for the temporary SIGA errors so the error message view is not flooded. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: improve inbound buffer acknowledgementJan Glauber2008-12-251-63/+118
| | | | | | | | | | | | | | | - Use automatic acknowledgement of incoming buffers in QEBSM mode - Move ACK for non-QEBSM mode always to the newest buffer to prevent a race with qdio_stop_polling - Remove the polling spinlock, the upper layer drivers return new buffers in the same code path and could not run in parallel - Don't flood the error log in case of no-target-buffer-empty - In handle_inbound we check if we would overwrite an ACK'ed buffer, if so advance the pointer to the oldest ACK'ed buffer so we don't overwrite an empty buffer in qdio_stop_polling Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: rework debug feature loggingJan Glauber2008-12-251-229/+95
| | | | | | | | | | | | | - make qdio_trace a per device view - remove s390dbf exceptions - remove CONFIG_QDIO_DEBUG, not needed anymore if we check for the level before calling sprintf - use snprintf for dbf entries - add start markers to see if the dbf view wrapped - add a global error view for all queues Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] qdio: fix compile warning under 31 bitJan Glauber2008-12-251-1/+1
| | | | | | | | | | | The QEBSM instructions are only available for CONFIG_64BIT, they are not used under 31 bit. Make compiler happy about the false positive: drivers/s390/cio/qdio_main.c: In function ?qdio_inbound_q_done?: drivers/s390/cio/qdio_main.c:532: warning: ?state? may be used uninitialized in this function Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.1 at 2024-05-21 11:05:11 +0000