path: root/drivers/staging/rtl8192e/r8192E_hw.h

/*
	This is part of rtl8187 OpenSource driver.
	Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
	Released under the terms of GPL (General Public Licence)

	Parts of this driver are based on the GPL part of the
	official Realtek driver.
	Parts of this driver are based on the rtl8180 driver skeleton
	from Patric Schenke & Andres Salomon.
	Parts of this driver are based on the Intel Pro Wireless
	2100 GPL driver.

	We want to tanks the Authors of those projects
	and the Ndiswrapper project Authors.
*/

/* Mariusz Matuszek added full registers definition with Realtek's name */

/* this file contains register definitions for the rtl8187 MAC controller */
#ifndef R8180_HW
#define R8180_HW

typedef enum _VERSION_8190{
	VERSION_8190_BD=0x3,
	VERSION_8190_BE
}VERSION_8190,*PVERSION_8190;
//added for different RF type
typedef enum _RT_RF_TYPE_DEF
{
	RF_1T2R = 0,
	RF_2T4R,

	RF_819X_MAX_TYPE
}RT_RF_TYPE_DEF;

typedef enum _BaseBand_Config_Type{
	BaseBand_Config_PHY_REG = 0,			//Radio Path A
	BaseBand_Config_AGC_TAB = 1,			//Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;

#define	RTL8187_REQT_READ	0xc0
#define	RTL8187_REQT_WRITE	0x40
#define	RTL8187_REQ_GET_REGS	0x05
#define	RTL8187_REQ_SET_REGS	0x05

#define R8180_MAX_RETRY 255
#define MAX_TX_URB 5
#define MAX_RX_URB 16
#define RX_URB_SIZE 9100

#define BB_ANTATTEN_CHAN14	0x0c
#define BB_ANTENNA_B 0x40

#define BB_HOST_BANG (1<<30)
#define BB_HOST_BANG_EN (1<<2)
#define BB_HOST_BANG_CLK (1<<1)
#define BB_HOST_BANG_RW (1<<3)
#define BB_HOST_BANG_DATA	 1

#define RTL8190_EEPROM_ID	0x8129
#define EEPROM_VID		0x02
#define EEPROM_DID		0x04
#define EEPROM_NODE_ADDRESS_BYTE_0	0x0C

#define EEPROM_TxPowerDiff	0x1F


#define EEPROM_PwDiff		0x21	//0x21
#define EEPROM_CrystalCap	0x22	//0x22



#define EEPROM_TxPwIndex_CCK_V1		0x29	//0x29~0x2B
#define EEPROM_TxPwIndex_OFDM_24G_V1	0x2C	//0x2C~0x2E
#define EEPROM_TxPwIndex_Ver		0x27	//0x27

#define EEPROM_Default_TxPowerDiff		0x0
#define EEPROM_Default_ThermalMeter		0x77
#define EEPROM_Default_AntTxPowerDiff		0x0
#define EEPROM_Default_TxPwDiff_CrystalCap	0x5
#define EEPROM_Default_PwDiff			0x4
#define EEPROM_Default_CrystalCap		0x5
#define EEPROM_Default_TxPower			0x1010
#define EEPROM_ICVersion_ChannelPlan	0x7C	//0x7C:ChannelPlan, 0x7D:IC_Version
#define EEPROM_Customer_ID			0x7B	//0x7B:CustomerID

#define EEPROM_RFInd_PowerDiff			0x28
#define EEPROM_ThermalMeter			0x29
#define EEPROM_TxPwDiff_CrystalCap		0x2A	//0x2A~0x2B
#define EEPROM_TxPwIndex_CCK			0x2C	//0x23
#define EEPROM_TxPwIndex_OFDM_24G	0x3A	//0x24~0x26

#define EEPROM_Default_TxPowerLevel		0x10

#define EEPROM_IC_VER				0x7d	//0x7D
#define EEPROM_CRC				0x7e	//0x7E~0x7F

#define EEPROM_CID_DEFAULT			0x0
#define EEPROM_CID_CAMEO				0x1
#define EEPROM_CID_RUNTOP				0x2
#define EEPROM_CID_Senao				0x3
#define EEPROM_CID_TOSHIBA				0x4	// Toshiba setting, Merge by Jacken, 2008/01/31
#define EEPROM_CID_NetCore				0x5
#define EEPROM_CID_Nettronix			0x6
#define EEPROM_CID_Pronet				0x7
#define EEPROM_CID_DLINK				0x8
#define EEPROM_CID_WHQL 				0xFE  //added by sherry for dtm, 20080728

enum _RTL8192Pci_HW {
	MAC0 			= 0x000,
	MAC1 			= 0x001,
	MAC2 			= 0x002,
	MAC3 			= 0x003,
	MAC4 			= 0x004,
	MAC5 			= 0x005,
	PCIF			= 0x009, // PCI Function Register 0x0009h~0x000bh
//----------------------------------------------------------------------------
//       8190 PCIF bits							(Offset 0x009-000b, 24bit)
//----------------------------------------------------------------------------
#define MXDMA2_16bytes		0x000
#define MXDMA2_32bytes		0x001
#define MXDMA2_64bytes		0x010
#define MXDMA2_128bytes		0x011
#define MXDMA2_256bytes		0x100
#define MXDMA2_512bytes		0x101
#define MXDMA2_1024bytes	0x110
#define MXDMA2_NoLimit		0x7

#define	MULRW_SHIFT		3
#define	MXDMA2_RX_SHIFT		4
#define	MXDMA2_TX_SHIFT		0
        PMR                     = 0x00c, // Power management register
	EPROM_CMD 		= 0x00e,
#define EPROM_CMD_RESERVED_MASK BIT5
#define EPROM_CMD_9356SEL	BIT4
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_LOAD 1
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0

	AFR			 = 0x010,
#define AFR_CardBEn		(1<<0)
#define AFR_CLKRUN_SEL		(1<<1)
#define AFR_FuncRegEn		(1<<2)

	ANAPAR			= 0x17,
#define	BB_GLOBAL_RESET_BIT	0x1
	BB_GLOBAL_RESET		= 0x020, // BasebandGlobal Reset Register
	BSSIDR			= 0x02E, // BSSID Register
	CMDR			= 0x037, // Command register
#define 	CR_RST					0x10
#define 	CR_RE					0x08
#define 	CR_TE					0x04
#define 	CR_MulRW				0x01
	SIFS		= 0x03E,	// SIFS register
	TCR			= 0x040, // Transmit Configuration Register
	RCR			= 0x044, // Receive Configuration Register
//----------------------------------------------------------------------------
////       8190 (RCR) Receive Configuration Register	(Offset 0x44~47, 32 bit)
////----------------------------------------------------------------------------
#define RCR_FILTER_MASK (BIT0|BIT1|BIT2|BIT3|BIT5|BIT12|BIT18|BIT19|BIT20|BIT21|BIT22|BIT23)
#define RCR_ONLYERLPKT		BIT31			// Early Receiving based on Packet Size.
#define RCR_ENCS2		BIT30				// Enable Carrier Sense Detection Method 2
#define RCR_ENCS1		BIT29				// Enable Carrier Sense Detection Method 1
#define RCR_ENMBID		BIT27				// Enable Multiple BssId.
#define RCR_ACKTXBW		(BIT24|BIT25)		// TXBW Setting of ACK frames
#define RCR_CBSSID		BIT23				// Accept BSSID match packet
#define RCR_APWRMGT		BIT22				// Accept power management packet
#define	RCR_ADD3		BIT21			// Accept address 3 match packet
#define RCR_AMF			BIT20				// Accept management type frame
#define RCR_ACF			BIT19				// Accept control type frame
#define RCR_ADF			BIT18				// Accept data type frame
#define RCR_RXFTH		BIT13	// Rx FIFO Threshold
#define RCR_AICV		BIT12				// Accept ICV error packet
#define	RCR_ACRC32		BIT5			// Accept CRC32 error packet
#define	RCR_AB			BIT3			// Accept broadcast packet
#define	RCR_AM			BIT2			// Accept multicast packet
#define	RCR_APM			BIT1			// Accept physical match packet
#define	RCR_AAP			BIT0			// Accept all unicast packet
#define RCR_MXDMA_OFFSET	8
#define RCR_FIFO_OFFSET		13
	SLOT_TIME		= 0x049, // Slot Time Register
	ACK_TIMEOUT		= 0x04c, // Ack Timeout Register
	PIFS_TIME		= 0x04d, // PIFS time
	USTIME			= 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
	EDCAPARA_BE		= 0x050, // EDCA Parameter of AC BE
	EDCAPARA_BK		= 0x054, // EDCA Parameter of AC BK
	EDCAPARA_VO		= 0x058, // EDCA Parameter of AC VO
	EDCAPARA_VI		= 0x05C, // EDCA Parameter of AC VI
#define	AC_PARAM_TXOP_LIMIT_OFFSET		16
#define	AC_PARAM_ECW_MAX_OFFSET		12
#define	AC_PARAM_ECW_MIN_OFFSET			8
#define	AC_PARAM_AIFS_OFFSET				0
	RFPC			= 0x05F, // Rx FIFO Packet Count
	CWRR			= 0x060, // Contention Window Report Register
	BCN_TCFG		= 0x062, // Beacon Time Configuration
#define BCN_TCFG_CW_SHIFT		8
#define BCN_TCFG_IFS			0
	BCN_INTERVAL		= 0x070, // Beacon Interval (TU)
	ATIMWND			= 0x072, // ATIM Window Size (TU)
	BCN_DRV_EARLY_INT	= 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
#define	BCN_DRV_EARLY_INT_SWBCN_SHIFT	8
#define	BCN_DRV_EARLY_INT_TIME_SHIFT	0
	BCN_DMATIME		= 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
	BCN_ERR_THRESH		= 0x078, // Beacon Error Threshold
	RWCAM			= 0x0A0, //IN 8190 Data Sheet is called CAMcmd
	//----------------------------------------------------------------------------
	////       8190 CAM Command Register     		(offset 0xA0, 4 byte)
	////----------------------------------------------------------------------------
#define   CAM_CM_SecCAMPolling		BIT31		//Security CAM Polling
#define   CAM_CM_SecCAMClr			BIT30		//Clear all bits in CAM
#define   CAM_CM_SecCAMWE			BIT16		//Security CAM enable
#define   CAM_VALID			       BIT15
#define   CAM_NOTVALID			0x0000
#define   CAM_USEDK				BIT5

#define   CAM_NONE				0x0
#define   CAM_WEP40				0x01
#define   CAM_TKIP				0x02
#define   CAM_AES				0x04
#define   CAM_WEP104			0x05

#define   TOTAL_CAM_ENTRY				32

#define   CAM_CONFIG_USEDK	true
#define   CAM_CONFIG_NO_USEDK	false
#define   CAM_WRITE		BIT16
#define   CAM_READ		0x00000000
#define   CAM_POLLINIG		BIT31
#define   SCR_UseDK		0x01
	WCAMI			= 0x0A4, // Software write CAM input content
	RCAMO			= 0x0A8, // Software read/write CAM config
	SECR			= 0x0B0, //Security Configuration Register
#define	SCR_TxUseDK			BIT0			//Force Tx Use Default Key
#define   SCR_RxUseDK			BIT1			//Force Rx Use Default Key
#define   SCR_TxEncEnable		BIT2			//Enable Tx Encryption
#define   SCR_RxDecEnable		BIT3			//Enable Rx Decryption
#define   SCR_SKByA2				BIT4			//Search kEY BY A2
#define   SCR_NoSKMC				BIT5			//No Key Search for Multicast
	SWREGULATOR	= 0x0BD,	// Switching Regulator
	INTA_MASK 		= 0x0f4,
//----------------------------------------------------------------------------
//       8190 IMR/ISR bits						(offset 0xfd,  8bits)
//----------------------------------------------------------------------------
#define IMR8190_DISABLED		0x0
#define IMR_ATIMEND			BIT28			// ATIM Window End Interrupt
#define IMR_TBDOK			BIT27			// Transmit Beacon OK Interrupt
#define IMR_TBDER			BIT26			// Transmit Beacon Error Interrupt
#define IMR_TXFOVW			BIT15			// Transmit FIFO Overflow
#define IMR_TIMEOUT0			BIT14			// TimeOut0
#define IMR_BcnInt			BIT13			// Beacon DMA Interrupt 0
#define	IMR_RXFOVW			BIT12			// Receive FIFO Overflow
#define IMR_RDU				BIT11			// Receive Descriptor Unavailable
#define IMR_RXCMDOK			BIT10			// Receive Command Packet OK
#define IMR_BDOK			BIT9			// Beacon Queue DMA OK Interrup
#define IMR_HIGHDOK			BIT8			// High Queue DMA OK Interrupt
#define	IMR_COMDOK			BIT7			// Command Queue DMA OK Interrupt
#define IMR_MGNTDOK			BIT6			// Management Queue DMA OK Interrupt
#define IMR_HCCADOK			BIT5			// HCCA Queue DMA OK Interrupt
#define	IMR_BKDOK			BIT4			// AC_BK DMA OK Interrupt
#define	IMR_BEDOK			BIT3			// AC_BE DMA OK Interrupt
#define	IMR_VIDOK			BIT2			// AC_VI DMA OK Interrupt
#define	IMR_VODOK			BIT1			// AC_VO DMA Interrupt
#define	IMR_ROK				BIT0			// Receive DMA OK Interrupt
	ISR			= 0x0f8, // Interrupt Status Register
	TPPoll			= 0x0fd, // Transmit priority polling register
#define TPPoll_BKQ		BIT0				// BK queue polling
#define TPPoll_BEQ		BIT1				// BE queue polling
#define TPPoll_VIQ		BIT2				// VI queue polling
#define TPPoll_VOQ		BIT3				// VO queue polling
#define TPPoll_BQ		BIT4				// Beacon queue polling
#define TPPoll_CQ		BIT5				// Command queue polling
#define TPPoll_MQ		BIT6				// Management queue polling
#define TPPoll_HQ		BIT7				// High queue polling
#define TPPoll_HCCAQ		BIT8				// HCCA queue polling
#define TPPoll_StopBK	BIT9				// Stop BK queue
#define TPPoll_StopBE	BIT10			// Stop BE queue
#define TPPoll_StopVI		BIT11			// Stop VI queue
#define TPPoll_StopVO	BIT12			// Stop VO queue
#define TPPoll_StopMgt	BIT13			// Stop Mgnt queue
#define TPPoll_StopHigh	BIT14			// Stop High queue
#define TPPoll_StopHCCA	BIT15			// Stop HCCA queue
#define TPPoll_SHIFT		8				// Queue ID mapping

	PSR			= 0x0ff, // Page Select Register
#define PSR_GEN			0x0				// Page 0 register general MAC Control
#define PSR_CPU			0x1				// Page 1 register for CPU
	CPU_GEN			= 0x100, // CPU Reset Register
	BB_RESET			= 0x101, // Baseband Reset
//----------------------------------------------------------------------------
//       8190 CPU General Register		(offset 0x100, 4 byte)
//----------------------------------------------------------------------------
#define	CPU_CCK_LOOPBACK	0x00030000
#define	CPU_GEN_SYSTEM_RESET	0x00000001
#define	CPU_GEN_FIRMWARE_RESET	0x00000008
#define	CPU_GEN_BOOT_RDY	0x00000010
#define	CPU_GEN_FIRM_RDY	0x00000020
#define	CPU_GEN_PUT_CODE_OK	0x00000080
#define	CPU_GEN_BB_RST		0x00000100
#define	CPU_GEN_PWR_STB_CPU	0x00000004
#define CPU_GEN_NO_LOOPBACK_MSK	0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
#define CPU_GEN_NO_LOOPBACK_SET	0x00080000 // Set BIT19 to 1
#define	CPU_GEN_GPIO_UART		0x00007000

	LED1Cfg			= 0x154,// LED1 Configuration Register
 	LED0Cfg			= 0x155,// LED0 Configuration Register

	AcmAvg			= 0x170, // ACM Average Period Register
	AcmHwCtrl		= 0x171, // ACM Hardware Control Register
//----------------------------------------------------------------------------
//
//       8190 AcmHwCtrl bits 					(offset 0x171, 1 byte)
//----------------------------------------------------------------------------
#define	AcmHw_HwEn		BIT0
#define	AcmHw_BeqEn		BIT1
#define	AcmHw_ViqEn		BIT2
#define	AcmHw_VoqEn		BIT3
#define	AcmHw_BeqStatus		BIT4
#define	AcmHw_ViqStatus		BIT5
#define	AcmHw_VoqStatus		BIT6
	AcmFwCtrl		= 0x172, // ACM Firmware Control Register
#define	AcmFw_BeqStatus		BIT0
#define	AcmFw_ViqStatus		BIT1
#define	AcmFw_VoqStatus		BIT2
	VOAdmTime		= 0x174, // VO Queue Admitted Time Register
	VIAdmTime		= 0x178, // VI Queue Admitted Time Register
	BEAdmTime		= 0x17C, // BE Queue Admitted Time Register
	RQPN1			= 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
	RQPN2			= 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
	RQPN3			= 0x188, // Reserved Queue Page Number, Bcn, Public,
	QPRR			= 0x1E0, // Queue Page Report per TID
	QPNR			= 0x1F0, // Queue Packet Number report per TID
/* there's 9 tx descriptor base address available */
	BQDA			= 0x200, // Beacon Queue Descriptor Address
	HQDA			= 0x204, // High Priority Queue Descriptor Address
	CQDA			= 0x208, // Command Queue Descriptor Address
	MQDA			= 0x20C, // Management Queue Descriptor Address
	HCCAQDA			= 0x210, // HCCA Queue Descriptor Address
	VOQDA			= 0x214, // VO Queue Descriptor Address
	VIQDA			= 0x218, // VI Queue Descriptor Address
	BEQDA			= 0x21C, // BE Queue Descriptor Address
	BKQDA			= 0x220, // BK Queue Descriptor Address
/* there's 2 rx descriptor base address availalbe */
	RCQDA			= 0x224, // Receive command Queue Descriptor Address
	RDQDA			= 0x228, // Receive Queue Descriptor Start Address

	MAR0			= 0x240, // Multicast filter.
	MAR4			= 0x244,

	CCX_PERIOD		= 0x250, // CCX Measurement Period Register, in unit of TU.
	CLM_RESULT		= 0x251, // CCA Busy fraction register.
	NHM_PERIOD		= 0x252, // NHM Measurement Period register, in unit of TU.

	NHM_THRESHOLD0		= 0x253, // Noise Histogram Meashorement0.
	NHM_THRESHOLD1		= 0x254, // Noise Histogram Meashorement1.
	NHM_THRESHOLD2		= 0x255, // Noise Histogram Meashorement2.
	NHM_THRESHOLD3		= 0x256, // Noise Histogram Meashorement3.
	NHM_THRESHOLD4		= 0x257, // Noise Histogram Meashorement4.
	NHM_THRESHOLD5		= 0x258, // Noise Histogram Meashorement5.
	NHM_THRESHOLD6		= 0x259, // Noise Histogram Meashorement6

	MCTRL			= 0x25A, // Measurement Control

	NHM_RPI_COUNTER0	= 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
	NHM_RPI_COUNTER1	= 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
	NHM_RPI_COUNTER2	= 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
	NHM_RPI_COUNTER3	= 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
	NHM_RPI_COUNTER4	= 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
	NHM_RPI_COUNTER5	= 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
	NHM_RPI_COUNTER6	= 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
	NHM_RPI_COUNTER7	= 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
        WFCRC0                  = 0x2f0,
        WFCRC1                  = 0x2f4,
        WFCRC2                  = 0x2f8,

	BW_OPMODE		= 0x300, // Bandwidth operation mode
#define	BW_OPMODE_11J			BIT0
#define	BW_OPMODE_5G			BIT1
#define	BW_OPMODE_20MHZ			BIT2
	IC_VERRSION		= 0x301,	//IC_VERSION
	MSR			= 0x303, // Media Status register
#define MSR_LINK_MASK      ((1<<0)|(1<<1))
#define MSR_LINK_MANAGED   2
#define MSR_LINK_NONE      0
#define MSR_LINK_SHIFT     0
#define MSR_LINK_ADHOC     1
#define MSR_LINK_MASTER    3
#define MSR_LINK_ENEDCA	   (1<<4)
	RETRY_LIMIT		= 0x304, // Retry Limit [15:8]-short, [7:0]-long
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
	TSFR			= 0x308,
	RRSR			= 0x310, // Response Rate Set
#define RRSR_RSC_OFFSET			21
#define RRSR_SHORT_OFFSET			23
#define RRSR_RSC_DUPLICATE			0x600000
#define RRSR_RSC_UPSUBCHNL			0x400000
#define RRSR_RSC_LOWSUBCHNL		0x200000
#define RRSR_SHORT					0x800000
#define RRSR_1M						BIT0
#define RRSR_2M						BIT1
#define RRSR_5_5M					BIT2
#define RRSR_11M					BIT3
#define RRSR_6M						BIT4
#define RRSR_9M						BIT5
#define RRSR_12M					BIT6
#define RRSR_18M					BIT7
#define RRSR_24M					BIT8
#define RRSR_36M					BIT9
#define RRSR_48M					BIT10
#define RRSR_54M					BIT11
#define RRSR_MCS0					BIT12
#define RRSR_MCS1					BIT13
#define RRSR_MCS2					BIT14
#define RRSR_MCS3					BIT15
#define RRSR_MCS4					BIT16
#define RRSR_MCS5					BIT17
#define RRSR_MCS6					BIT18
#define RRSR_MCS7					BIT19
#define BRSR_AckShortPmb			BIT23		// CCK ACK: use Short Preamble or not
	UFWP			= 0x318,
	RATR0			= 0x320, // Rate Adaptive Table register1
//----------------------------------------------------------------------------
//       8190 Rate Adaptive Table Register	(offset 0x320, 4 byte)
//----------------------------------------------------------------------------
//CCK
#define	RATR_1M			0x00000001
#define	RATR_2M			0x00000002
#define	RATR_55M		0x00000004
#define	RATR_11M		0x00000008
//OFDM
#define	RATR_6M			0x00000010
#define	RATR_9M			0x00000020
#define	RATR_12M		0x00000040
#define	RATR_18M		0x00000080
#define	RATR_24M		0x00000100
#define	RATR_36M		0x00000200
#define	RATR_48M		0x00000400
#define	RATR_54M		0x00000800
//MCS 1 Spatial Stream
#define	RATR_MCS0		0x00001000
#define	RATR_MCS1		0x00002000
#define	RATR_MCS2		0x00004000
#define	RATR_MCS3		0x00008000
#define	RATR_MCS4		0x00010000
#define	RATR_MCS5		0x00020000
#define	RATR_MCS6		0x00040000
#define	RATR_MCS7		0x00080000
//MCS 2 Spatial Stream
#define	RATR_MCS8		0x00100000
#define	RATR_MCS9		0x00200000
#define	RATR_MCS10		0x00400000
#define	RATR_MCS11		0x00800000
#define	RATR_MCS12		0x01000000
#define	RATR_MCS13		0x02000000
#define	RATR_MCS14		0x04000000
#define	RATR_MCS15		0x08000000
// ALL CCK Rate
#define RATE_ALL_CCK		RATR_1M|RATR_2M|RATR_55M|RATR_11M
#define RATE_ALL_OFDM_AG	RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|RATR_36M|RATR_48M|RATR_54M
#define RATE_ALL_OFDM_1SS	RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
									RATR_MCS4|RATR_MCS5|RATR_MCS6	|RATR_MCS7
#define RATE_ALL_OFDM_2SS	RATR_MCS8|RATR_MCS9	|RATR_MCS10|RATR_MCS11| \
									RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15


	DRIVER_RSSI		= 0x32c,	// Driver tell Firmware current RSSI
	MCS_TXAGC		= 0x340, // MCS AGC
	CCK_TXAGC		= 0x348, // CCK AGC
	MacBlkCtrl		= 0x403, // Mac block on/off control register

};

#define GPI 0x108
#define GPO 0x109
#define GPE 0x10a

#define	ANAPAR_FOR_8192PciE							0x17		// Analog parameter register

#define	MSR_NOLINK					0x00
#define	MSR_ADHOC					0x01
#define	MSR_INFRA					0x02
#define	MSR_AP						0x03

#endif