Code drop from //branches/cupcake/...@124589

6 files changed, 31 insertions, 116 deletions

diff --git a/rootdir/Android.mk b/rootdir/Android.mk
index 756005b..7ff1a74 100644
--- a/rootdir/Android.mk
+++ b/rootdir/Android.mk
@@ -7,8 +7,7 @@ copy_from := \
 	etc/mountd.conf \
 	etc/dbus.conf \
 	etc/init.goldfish.sh \
-	etc/hosts \
-	etc/hcid.conf 
+	etc/hosts
 
 dont_copy := \
 	etc/init.gprs-pppd \
@@ -28,10 +27,13 @@ ALL_PREBUILT += $(copy_to)
 
 # files that live under /...
 
+# Only copy init.rc if the target doesn't have its own.
+ifneq ($(TARGET_PROVIDES_INIT_RC),true)
 file := $(TARGET_ROOT_OUT)/init.rc
 $(file) : $(LOCAL_PATH)/init.rc | $(ACP)
 	$(transform-prebuilt-to-target)
 ALL_PREBUILT += $(file)
+endif
 
 file := $(TARGET_ROOT_OUT)/init.goldfish.rc
 $(file) : $(LOCAL_PATH)/etc/init.goldfish.rc | $(ACP)
diff --git a/rootdir/etc/dbus.conf b/rootdir/etc/dbus.conf
index 8742345..75586b9 100644
--- a/rootdir/etc/dbus.conf
+++ b/rootdir/etc/dbus.conf
@@ -5,9 +5,6 @@
   <!-- Our well-known bus type, do not change this -->
   <type>system</type>
 
-  <!-- Fork into daemon mode -->
-  <fork/>
-
   <!-- Only allow socket-credentials-based authentication -->
   <auth>EXTERNAL</auth>
 
@@ -17,51 +14,14 @@
        systems.) -->
   <listen>unix:path=/dev/socket/dbus</listen>
 
+  <!-- Allow everything, D-Bus socket is protected by unix filesystem
+       permissions -->
   <policy context="default">
-    <!-- Deny everything then punch holes -->
-    <deny send_interface="*"/>
-    <deny receive_interface="*"/>
-    <deny own="*"/>
-    <!-- But allow all users to connect -->
+    <allow send_interface="*"/>
+    <allow receive_interface="*"/>
+    <allow own="*"/>
     <allow user="*"/>
-    <!-- Allow anyone to talk to the message bus -->
-    <!-- FIXME I think currently these allow rules are always implicit 
-         even if they aren't in here -->
-    <allow send_destination="org.freedesktop.DBus"/>
-    <allow receive_sender="org.freedesktop.DBus"/>
-    <!-- valid replies are always allowed -->
     <allow send_requested_reply="true"/>
     <allow receive_requested_reply="true"/>
   </policy>
-
-
-  <!-- Now punch holes for bluetooth -->
-
-  <policy context="default">
-    <allow own="*"/>
-    <allow user="*"/>
-    <allow send_destination="org.bluez.PasskeyAgent"/>
-    <allow receive_sender="org.bluez.PasskeyAgent"/>
-    <allow send_path="/org/bluez/PasskeyAgent"/>
-  </policy>
-
-  <policy user="root">
-    <allow own="org.bluez"/>
-  </policy>
-
-  <policy at_console="true">
-    <allow send_destination="org.bluez.Adapter"/>
-    <allow receive_sender="org.bluez.Adapter"/>
-
-    <allow send_path="/org/bluez/Adapter"/>
-
-    <allow send_destination="org.bluez.Manager"/>
-    <allow receive_sender="org.bluez.Manager"/>
-
-    <allow send_path="/org/bluez/Manager"/>
-
-    <allow send_destination="org.bluez.Security"/>
-    <allow receive_sender="org.bluez.Security"/>
-  </policy>
-
 </busconfig>
diff --git a/rootdir/etc/hcid.conf b/rootdir/etc/hcid.conf
deleted file mode 100644
index 56df63a..0000000
--- a/rootdir/etc/hcid.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# HCI daemon configuration file.
-#
-
-# HCId options
-options {
-	# Automatically initialize new devices
-	autoinit yes;
-
-	# Security Manager mode
-	#   none - Security manager disabled
-	#   auto - Use local PIN for incoming connections
-	#   user - Always ask user for a PIN
-	#
-	security user;
-
-	# Pairing mode
-	#   none  - Pairing disabled
-	#   multi - Allow pairing with already paired devices
-	#   once  - Pair once and deny successive attempts
-	pairing multi;
-}
-
-# Default settings for HCI devices
-device {
-	# Local device name
-	#   %d - device id
-	#   %h - host name
-	#   %b - ro.product.brand
-	#   %m - ro.product.model
-	#   %n - ro.product.name
-	name "%m";
-
-	# Local device class
-	#     0x400000  - Service class: Telephony
-	#     0x000200  - Major class: Phone
-	#     0x00000C  - Minor class: Smart phone
-	class 0x40020C;
-
-	# Default packet type
-	#pkt_type DH1,DM1,HV1;
-
-	# Inquiry and Page scan
-	iscan disable;
-	pscan enable;
-
-	# Page timeout (in 0.625ms slots): 10 seconds
-	pageto 16384;
-
-	# Default link mode
-	#   none   - no specific policy
-	#   accept - always accept incoming connections
-	#   master - become master on incoming connections,
-	#            deny role switch on outgoing connections
-	lm accept;
-
-	# Default link policy
-	#   none    - no specific policy
-	#   rswitch - allow role switch
-	#   hold    - allow hold mode
-	#   sniff   - allow sniff mode
-	#   park    - allow park mode
-	lp rswitch,hold,sniff,park;
-}
diff --git a/rootdir/etc/init.goldfish.rc b/rootdir/etc/init.goldfish.rc
index 5975974..96480f3 100644
--- a/rootdir/etc/init.goldfish.rc
+++ b/rootdir/etc/init.goldfish.rc
@@ -16,11 +16,11 @@ on boot
     stop dund
     stop akmd
 
-    setprop app.setupwizard.disable 1
+    setprop ro.setupwizard.mode EMULATOR
 
 # enable Google-specific location features,
 # like NetworkLocationProvider and LocationCollector
-    setprop ro.com.google.enable_google_location_features 1
+    setprop ro.com.google.locationfeatures 1
 
 # For the emulator, which bypasses Setup Wizard, you can specify
 # account info for the device via these two properties.  Google
@@ -39,8 +39,9 @@ service goldfish-setup /system/etc/init.goldfish.sh
     oneshot
 
 service qemud /system/bin/qemud
-    socket qemud_gsm stream 666
-    socket qemud_gps stream 666
+    socket qemud_gsm     stream 666
+    socket qemud_gps     stream 666
+    socket qemud_control stream 666
     oneshot
 
 # -Q is a special logcat option that forces the
diff --git a/rootdir/etc/mountd.conf b/rootdir/etc/mountd.conf
index d9dfded..094a2c7 100644
--- a/rootdir/etc/mountd.conf
+++ b/rootdir/etc/mountd.conf
@@ -10,4 +10,10 @@ mount {
     
     ## true if this mount point can be shared via USB mass storage
     enable_ums      true
+    
+    ## path to the UMS driver file for specifying the block device path  
+    ## use this for the mass_storage function driver
+    driver_store_path   /sys/devices/platform/usb_mass_storage/lun0/file
+    ## use this for android_usb composite gadget driver
+    ##driver_store_path   /sys/devices/platform/msm_hsusb/gadget/lun0/file
 }
diff --git a/rootdir/init.rc b/rootdir/init.rc
index 23daa0b..3f8c6a0 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -1,6 +1,8 @@
 
 on init
 
+sysclktz 0
+
 loglevel 3
 
 # setup the global environment
@@ -118,6 +120,12 @@ on boot
     chown radio system /sys/android_power/acquire_full_wake_lock
     chown radio system /sys/android_power/acquire_partial_wake_lock
     chown radio system /sys/android_power/release_wake_lock
+    chown radio system /sys/power/state
+    chown radio system /sys/power/wake_lock
+    chown radio system /sys/power/wake_unlock
+    chmod 0660 /sys/power/state
+    chmod 0660 /sys/power/wake_lock
+    chmod 0660 /sys/power/wake_unlock
     chown system system /sys/class/timed_output/vibrator/enable
     chown system system /sys/class/leds/keyboard-backlight/brightness
     chown system system /sys/class/leds/lcd-backlight/brightness
@@ -193,6 +201,7 @@ service ril-daemon /system/bin/rild
 service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server
     socket zygote stream 666
     onrestart write /sys/android_power/request_state wake
+    onrestart write /sys/power/state on
 
 service media /system/bin/mediaserver
     user media
@@ -208,7 +217,8 @@ service dbus /system/bin/dbus-daemon --system --nofork
     user bluetooth
     group bluetooth net_bt_admin
 
-service hcid /system/bin/hcid -s -n -f /etc/hcid.conf
+#STOPSHIP: disable the verbose logging
+service hcid /system/bin/logwrapper /system/bin/hcid -d -s -n -f /etc/bluez/hcid.conf
     socket bluetooth stream 660 bluetooth bluetooth
     socket dbus_bluetooth stream 660 bluetooth bluetooth
     # init.rc does not yet support applying capabilities, so run as root and