Add initial sphinx docs

With an initial guide for using youtube_dl from python programs.

6 files changed, 341 insertions, 0 deletions

diff --git a/MANIFEST.in b/MANIFEST.in
index 8f8af7a..08be9af 100644
--- a/MANIFEST.in
+++ b/MANIFEST.in
@@ -3,3 +3,5 @@ include test/*.py
 include test/*.json
 include youtube-dl.bash-completion
 include youtube-dl.1
+recursive-include docs *
+prune docs/_build
diff --git a/docs/.gitignore b/docs/.gitignore
new file mode 100644
index 0000000..69fa449
--- /dev/null
+++ b/docs/.gitignore
@@ -0,0 +1 @@
+_build/
diff --git a/docs/Makefile b/docs/Makefile
new file mode 100644
index 0000000..7122180
--- /dev/null
+++ b/docs/Makefile
@@ -0,0 +1,177 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/youtube-dl.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/youtube-dl.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/youtube-dl"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/youtube-dl"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/conf.py b/docs/conf.py
new file mode 100644
index 0000000..4a04ad7
--- /dev/null
+++ b/docs/conf.py
@@ -0,0 +1,71 @@
+# -*- coding: utf-8 -*-
+#
+# youtube-dl documentation build configuration file, created by
+# sphinx-quickstart on Fri Mar 14 21:05:43 2014.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+# Allows to import youtube_dl
+sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
+
+# -- General configuration ------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'youtube-dl'
+copyright = u'2014, Ricardo Garcia Gonzalez'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+import youtube_dl
+version = youtube_dl.__version__
+# The full version, including alpha/beta/rc tags.
+release = version
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'youtube-dldoc'
diff --git a/docs/index.rst b/docs/index.rst
new file mode 100644
index 0000000..b746ff9
--- /dev/null
+++ b/docs/index.rst
@@ -0,0 +1,23 @@
+Welcome to youtube-dl's documentation!
+======================================
+
+*youtube-dl* is a command-line program to download videos from YouTube.com and more sites.
+It can also be used in Python code.
+
+Developer guide
+---------------
+
+This section contains information for using *youtube-dl* from Python programs.
+
+.. toctree::
+    :maxdepth: 2
+
+    module_guide
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
diff --git a/docs/module_guide.rst b/docs/module_guide.rst
new file mode 100644
index 0000000..03d7288
--- /dev/null
+++ b/docs/module_guide.rst
@@ -0,0 +1,67 @@
+Using the ``youtube_dl`` module
+===============================
+
+When using the ``youtube_dl`` module, you start by creating an instance of :class:`YoutubeDL` and adding all the available extractors:
+
+.. code-block:: python
+
+    >>> from youtube_dl import YoutubeDL
+    >>> ydl = YoutubeDL()
+    >>> ydl.add_default_info_extractors()
+
+Extracting video information
+----------------------------
+
+You use the :meth:`YoutubeDL.extract_info` method for getting the video information, which returns a dictionary:
+
+.. code-block:: python
+
+    >>> info = ydl.extract_info('http://www.youtube.com/watch?v=BaW_jenozKc', download=False)
+    [youtube] Setting language
+    [youtube] BaW_jenozKc: Downloading webpage
+    [youtube] BaW_jenozKc: Downloading video info webpage
+    [youtube] BaW_jenozKc: Extracting video information
+    >>> info['title']
+    'youtube-dl test video "\'/\\ä↭𝕐'
+    >>> info['height'], info['width']
+    (720, 1280)
+
+If you want to download or play the video you can get its url:
+
+.. code-block:: python
+
+    >>> info['url']
+    'https://...'
+
+Extracting playlist information
+-------------------------------
+
+The playlist information is extracted in a similar way, but the dictionary is a bit different:
+
+.. code-block:: python
+
+    >>> playlist = ydl.extract_info('http://www.ted.com/playlists/13/open_source_open_world', download=False)
+    [TED] open_source_open_world: Downloading playlist webpage
+    ...
+    >>> playlist['title']
+    'Open-source, open world'
+
+
+
+You can access the videos in the playlist with the ``entries`` field:
+
+.. code-block:: python
+
+    >>> for video in playlist['entries']:
+    ...     print('Video #%d: %s' % (video['playlist_index'], video['title']))
+
+    Video #1: How Arduino is open-sourcing imagination
+    Video #2: The year open data went worldwide
+    Video #3: Massive-scale online collaboration
+    Video #4: The art of asking
+    Video #5: How cognitive surplus will change the world
+    Video #6: The birth of Wikipedia
+    Video #7: Coding a better government
+    Video #8: The era of open innovation
+    Video #9: The currency of the new economy is trust
+