aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/networking/3c359.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/networking/3c359.txt
downloadkernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/networking/3c359.txt')
-rw-r--r--Documentation/networking/3c359.txt58
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt
new file mode 100644
index 0000000..4af8071
--- /dev/null
+++ b/Documentation/networking/3c359.txt
@@ -0,0 +1,58 @@
+
+3COM PCI TOKEN LINK VELOCITY XL TOKEN RING CARDS README
+
+Release 0.9.0 - Release
+ Jul 17th 2000 Mike Phillips
+
+ 1.2.0 - Final
+ Feb 17th 2002 Mike Phillips
+ Updated for submission to the 2.4.x kernel.
+
+Thanks:
+ Terry Murphy from 3Com for tech docs and support,
+ Adam D. Ligas for testing the driver.
+
+Note:
+ This driver will NOT work with the 3C339 Token Ring cards, you need
+to use the tms380 driver instead.
+
+Options:
+
+The driver accepts three options: ringspeed, pkt_buf_sz and message_level.
+
+These options can be specified differently for each card found.
+
+ringspeed: Has one of three settings 0 (default), 4 or 16. 0 will
+make the card autosense the ringspeed and join at the appropriate speed,
+this will be the default option for most people. 4 or 16 allow you to
+explicitly force the card to operate at a certain speed. The card will fail
+if you try to insert it at the wrong speed. (Although some hubs will allow
+this so be *very* careful). The main purpose for explicitly setting the ring
+speed is for when the card is first on the ring. In autosense mode, if the card
+cannot detect any active monitors on the ring it will open at the same speed as
+its last opening. This can be hazardous if this speed does not match the speed
+you want the ring to operate at.
+
+pkt_buf_sz: This is this initial receive buffer allocation size. This will
+default to 4096 if no value is entered. You may increase performance of the
+driver by setting this to a value larger than the network packet size, although
+the driver now re-sizes buffers based on MTU settings as well.
+
+message_level: Controls level of messages created by the driver. Defaults to 0:
+which only displays start-up and critical messages. Presently any non-zero
+value will display all soft messages as well. NB This does not turn
+debugging messages on, that must be done by modified the source code.
+
+Variable MTU size:
+
+The driver can handle a MTU size upto either 4500 or 18000 depending upon
+ring speed. The driver also changes the size of the receive buffers as part
+of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
+to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring
+position = 296,000 bytes of memory space, plus of course anything
+necessary for the tx sk_buff's. Remember this is per card, so if you are
+building routers, gateway's etc, you could start to use a lot of memory
+real fast.
+
+2/17/02 Mike Phillips
+