samsung update 1

1 files changed, 359 insertions, 0 deletions

diff --git a/include/compat/linux/rfkill_backport.h b/include/compat/linux/rfkill_backport.h
new file mode 100755
index 0000000..c6c6084
--- /dev/null
+++ b/include/compat/linux/rfkill_backport.h
@@ -0,0 +1,359 @@
+#ifndef __RFKILL_H
+#define __RFKILL_H
+
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+#ifdef __KERNEL__
+/* don't allow anyone to use these in the kernel */
+enum rfkill_user_states {
+	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
+	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
+	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
+};
+#undef RFKILL_STATE_SOFT_BLOCKED
+#undef RFKILL_STATE_UNBLOCKED
+#undef RFKILL_STATE_HARD_BLOCKED
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+/* this is opaque */
+struct rfkill;
+
+/**
+ * struct rfkill_ops - rfkill driver methods
+ *
+ * @poll: poll the rfkill block state(s) -- only assign this method
+ *	when you need polling. When called, simply call one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
+ *	is getting unblocked you need to take into account the return
+ *	value of those functions to make sure the software block is
+ *	properly used.
+ * @query: query the rfkill block state(s) and call exactly one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
+ *	method if input events can cause hardware state changes to make
+ *	the rfkill core query your driver before setting a requested
+ *	block.
+ * @set_block: turn the transmitter on (blocked == false) or off
+ *	(blocked == true) -- ignore and return 0 when hard blocked.
+ *	This callback must be assigned.
+ */
+struct rfkill_ops {
+	void	(*poll)(struct rfkill *rfkill, void *data);
+	void	(*query)(struct rfkill *rfkill, void *data);
+	int	(*set_block)(void *data, bool blocked);
+};
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+/**
+ * rfkill_alloc - allocate rfkill structure
+ * @name: name of the struct -- the string is not copied internally
+ * @parent: device that has rf switch on it
+ * @type: type of the switch (RFKILL_TYPE_*)
+ * @ops: rfkill methods
+ * @ops_data: data passed to each method
+ *
+ * This function should be called by the transmitter driver to allocate an
+ * rfkill structure. Returns %NULL on failure.
+ */
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data);
+
+/**
+ * rfkill_register - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ *
+ * This function should be called by the transmitter driver to register
+ * the rfkill structure. Before calling this function the driver needs
+ * to be ready to service method calls from rfkill.
+ *
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
+ *
+ * If the hardware blocked state is not set before registration,
+ * it is assumed to be unblocked.
+ */
+int __must_check rfkill_register(struct rfkill *rfkill);
+
+/**
+ * rfkill_pause_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_pause_polling(struct rfkill *rfkill);
+
+/**
+ * rfkill_resume_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_resume_polling(struct rfkill *rfkill);
+
+
+/**
+ * rfkill_unregister - Unregister a rfkill structure.
+ * @rfkill: rfkill structure to be unregistered
+ *
+ * This function should be called by the network driver during device
+ * teardown to destroy rfkill structure. Until it returns, the driver
+ * needs to be able to service method calls.
+ */
+void rfkill_unregister(struct rfkill *rfkill);
+
+/**
+ * rfkill_destroy - free rfkill structure
+ * @rfkill: rfkill structure to be destroyed
+ *
+ * Destroys the rfkill structure.
+ */
+void rfkill_destroy(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_hw_state - Set the internal rfkill hardware block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current hardware block state to set
+ *
+ * rfkill drivers that get events when the hard-blocked state changes
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  They should also use this after
+ * resume if the state could have changed.
+ *
+ * You need not (but may) call this function if poll_state is assigned.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked) so that drivers need not keep track of the soft
+ * block state -- which they might not be able to.
+ */
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_sw_state - Set the internal rfkill software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that get events when the soft-blocked state changes
+ * (yes, some platforms directly act on input but allow changing again)
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user.  This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked).
+ */
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state.  It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace.  Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_states - Set the internal rfkill block states
+ * @rfkill: pointer to the rfkill class to modify.
+ * @sw: the current software block state to set
+ * @hw: the current hardware block state to set
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ */
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
+
+/**
+ * rfkill_blocked - query rfkill block
+ *
+ * @rfkill: rfkill struct to query
+ */
+bool rfkill_blocked(struct rfkill *rfkill);
+#else /* !RFKILL */
+static inline struct rfkill * __must_check
+rfkill_alloc(const char *name,
+	     struct device *parent,
+	     const enum rfkill_type type,
+	     const struct rfkill_ops *ops,
+	     void *ops_data)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	if (rfkill == ERR_PTR(-ENODEV))
+		return 0;
+	return -EINVAL;
+}
+
+static inline void rfkill_pause_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_resume_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_unregister(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_destroy(struct rfkill *rfkill)
+{
+}
+
+static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
+static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+}
+
+static inline bool rfkill_blocked(struct rfkill *rfkill)
+{
+	return false;
+}
+#endif /* RFKILL || RFKILL_MODULE */
+
+#endif /* __KERNEL__ */
+
+#endif /* RFKILL_H */