samsung update 1

97 files changed, 31020 insertions, 0 deletions

diff --git a/include/compat/linux/ath9k_platform.h b/include/compat/linux/ath9k_platform.h
new file mode 100755
index 0000000..6e3f54f
--- /dev/null
+++ b/include/compat/linux/ath9k_platform.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+	u8 *macaddr;
+
+	int led_pin;
+	u32 gpio_mask;
+	u32 gpio_val;
+
+	bool is_clk_25mhz;
+	int (*get_mac_revision)(void);
+	int (*external_reset)(void);
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/compat/linux/atomic.h b/include/compat/linux/atomic.h
new file mode 100755
index 0000000..378b748
--- /dev/null
+++ b/include/compat/linux/atomic.h
@@ -0,0 +1,46 @@
+#ifndef _COMPAT_LINUX_ATOMIC_H
+#define _COMPAT_LINUX_ATOMIC_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36))
+#include_next <linux/atomic.h>
+#else
+
+#include <asm/atomic.h>
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+	int val, c = hint;
+
+	/* sanity test, should be removed by compiler if hint is a constant */
+	if (!hint)
+		return atomic_inc_not_zero(v);
+
+	do {
+		val = atomic_cmpxchg(v, c, c + 1);
+		if (val == c)
+			return 1;
+		c = val;
+	} while (c);
+
+	return 0;
+}
+#endif
+
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36)) */
+
+#endif	/* _COMPAT_LINUX_ATOMIC_H */
diff --git a/include/compat/linux/average.h b/include/compat/linux/average.h
new file mode 100755
index 0000000..ece86ca
--- /dev/null
+++ b/include/compat/linux/average.h
@@ -0,0 +1,5 @@
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,37))
+#include_next <linux/average.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,37)) */
diff --git a/include/compat/linux/bcma/bcma.h b/include/compat/linux/bcma/bcma.h
new file mode 100755
index 0000000..4d4b59d
--- /dev/null
+++ b/include/compat/linux/bcma/bcma.h
@@ -0,0 +1,277 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_mips.h>
+#include <linux/ssb/ssb.h> /* SPROM sharing */
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+	BCMA_HOSTTYPE_SOC,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+enum bcma_clkmode {
+	BCMA_CLKMODE_FAST,
+	BCMA_CLKMODE_DYNAMIC,
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+#ifdef CONFIG_BCMA_BLOCKIO
+	void (*block_read)(struct bcma_device *core, void *buffer,
+			   size_t count, u16 offset, u8 reg_width);
+	void (*block_write)(struct bcma_device *core, const void *buffer,
+			    size_t count, u16 offset, u8 reg_width);
+#endif
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	struct device *dma_dev;
+
+	unsigned int irq;
+	bool dev_registered;
+
+	u8 core_index;
+
+	u32 addr;
+	u32 wrap;
+
+	void __iomem *io_addr;
+	void __iomem *io_wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+#define bcma_driver_register(drv) \
+	__bcma_driver_register(drv, THIS_MODULE)
+
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+	u8 init_done:1;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+	struct bcma_drv_mips drv_mips;
+
+	/* We decided to share SPROM struct with SSB as long as we do not need
+	 * any hacks for BCMA. This simplifies drivers code. */
+	struct ssb_sprom sprom;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+#ifdef CONFIG_BCMA_BLOCKIO
+extern inline void bcma_block_read(struct bcma_device *core, void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_read(core, buffer, count, offset, reg_width);
+}
+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer,
+				    size_t count, u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_write(core, buffer, count, offset, reg_width);
+}
+#endif
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+#define bcma_mask32(cc, offset, mask) \
+	bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask))
+#define bcma_set32(cc, offset, set) \
+	bcma_write32(cc, offset, bcma_read32(cc, offset) | (set))
+#define bcma_maskset32(cc, offset, mask, set) \
+	bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set))
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern void bcma_core_disable(struct bcma_device *core, u32 flags);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+extern void bcma_core_set_clockmode(struct bcma_device *core,
+				    enum bcma_clkmode clkmode);
+extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+			      bool on);
+#define BCMA_DMA_TRANSLATION_MASK	0xC0000000
+#define  BCMA_DMA_TRANSLATION_NONE	0x00000000
+#define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
+#define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/compat/linux/bcma/bcma_driver_chipcommon.h b/include/compat/linux/bcma/bcma_driver_chipcommon.h
new file mode 100755
index 0000000..1526d96
--- /dev/null
+++ b/include/compat/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,390 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define   BCMA_CC_FLASHT_NFLASH		0x00000200
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  BCMA_CC_GPIOTIMER_OFFTIME_SHIFT	0
+#define  BCMA_CC_GPIOTIMER_ONTIME	0xFFFF0000
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+/* 0x1E0 is defined as shared BCMA_CLKCTLST */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+#define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
+#define BCMA_CC_SPROM_PCIE6		0x0830 /* SPROM beginning on PCIe rev >= 6 */
+
+/* Divider allocation in 4716/47162/5356 */
+#define BCMA_CC_PMU5_MAINPLL_CPU	1
+#define BCMA_CC_PMU5_MAINPLL_MEM	2
+#define BCMA_CC_PMU5_MAINPLL_SSB	3
+
+/* PLL usage in 4716/47162 */
+#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
+
+/* PLL usage in 5356/5357 */
+#define BCMA_CC_PMU5356_MAINPLL_PLL0	0
+#define BCMA_CC_PMU5357_MAINPLL_PLL0	0
+
+/* 4706 PMU */
+#define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+
+/* ALP clock on pre-PMU chips */
+#define BCMA_CC_PMU_ALP_CLOCK		20000000
+/* HT clock for systems with PMU-enabled chipcommon */
+#define BCMA_CC_PMU_HT_CLOCK		80000000
+
+/* PMU rev 5 (& 6) */
+#define BCMA_CC_PPL_P1P2_OFF		0
+#define BCMA_CC_PPL_P1_MASK		0x0f000000
+#define BCMA_CC_PPL_P1_SHIFT		24
+#define BCMA_CC_PPL_P2_MASK		0x00f00000
+#define BCMA_CC_PPL_P2_SHIFT		20
+#define BCMA_CC_PPL_M14_OFF		1
+#define BCMA_CC_PPL_MDIV_MASK		0x000000ff
+#define BCMA_CC_PPL_MDIV_WIDTH		8
+#define BCMA_CC_PPL_NM5_OFF		2
+#define BCMA_CC_PPL_NDIV_MASK		0xfff00000
+#define BCMA_CC_PPL_NDIV_SHIFT		20
+#define BCMA_CC_PPL_FMAB_OFF		3
+#define BCMA_CC_PPL_MRAT_MASK		0xf0000000
+#define BCMA_CC_PPL_MRAT_SHIFT		28
+#define BCMA_CC_PPL_ABRAT_MASK		0x08000000
+#define BCMA_CC_PPL_ABRAT_SHIFT		27
+#define BCMA_CC_PPL_FDIV_MASK		0x07ffffff
+#define BCMA_CC_PPL_PLLCTL_OFF		4
+#define BCMA_CC_PPL_PCHI_OFF		5
+#define BCMA_CC_PPL_PCHI_MASK		0x0000003f
+
+/* BCM4331 ChipControl numbers. */
+#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
+#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
+#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
+#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
+#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
+#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
+#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
+#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
+#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+struct bcma_pflash {
+	u8 buswidth;
+	u32 window;
+	u32 window_size;
+};
+
+struct bcma_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	u8 setup_done:1;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	struct bcma_pflash pflash;
+
+	int nr_serial_ports;
+	struct bcma_serial_port serial_ports[4];
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+				  u32 value);
+extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
+				    u32 mask, u32 set);
+extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set);
+extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+				       u32 offset, u32 mask, u32 set);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/compat/linux/bcma/bcma_driver_mips.h b/include/compat/linux/bcma/bcma_driver_mips.h
new file mode 100755
index 0000000..c004364
--- /dev/null
+++ b/include/compat/linux/bcma/bcma_driver_mips.h
@@ -0,0 +1,51 @@
+#ifndef LINUX_BCMA_DRIVER_MIPS_H_
+#define LINUX_BCMA_DRIVER_MIPS_H_
+
+#define BCMA_MIPS_IPSFLAG		0x0F08
+/* which sbflags get routed to mips interrupt 1 */
+#define  BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
+#define  BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
+/* which sbflags get routed to mips interrupt 2 */
+#define  BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
+#define  BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
+/* which sbflags get routed to mips interrupt 3 */
+#define  BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
+#define  BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
+/* which sbflags get routed to mips interrupt 4 */
+#define  BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
+#define  BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
+
+/* MIPS 74K core registers */
+#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
+#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
+#define BCMA_MIPS_MIPS74K_BIST		0x000C
+#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
+#define BCMA_MIPS_MIPS74K_INTMASK(int) \
+	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
+#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
+#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
+#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
+#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
+#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
+
+#define BCMA_MIPS_OOBSELOUTA30		0x100
+
+struct bcma_device;
+
+struct bcma_drv_mips {
+	struct bcma_device *core;
+	u8 setup_done:1;
+	unsigned int assigned_irqs;
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+#endif
+
+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+
+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/include/compat/linux/bcma/bcma_driver_pci.h b/include/compat/linux/bcma/bcma_driver_pci.h
new file mode 100755
index 0000000..3871b66
--- /dev/null
+++ b/include/compat/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,91 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+				 struct bcma_device *core, bool enable);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/compat/linux/bcma/bcma_regs.h b/include/compat/linux/bcma/bcma_regs.h
new file mode 100755
index 0000000..9faae2a
--- /dev/null
+++ b/include/compat/linux/bcma/bcma_regs.h
@@ -0,0 +1,59 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Some single registers are shared between many cores */
+/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
+#define BCMA_CLKCTLST			0x01E0 /* Clock control and status */
+#define  BCMA_CLKCTLST_FORCEALP		0x00000001 /* Force ALP request */
+#define  BCMA_CLKCTLST_FORCEHT		0x00000002 /* Force HT request */
+#define  BCMA_CLKCTLST_FORCEILP		0x00000004 /* Force ILP request */
+#define  BCMA_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
+#define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
+#define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
+#define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
+#define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
+#define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
+/* Is there any BCM4328 on BCMA bus? */
+#define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408 /* IO control */
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_IOST			0x0500 /* IO status */
+#define  BCMA_IOST_CORE_BITS		0x0FFF
+#define  BCMA_IOST_DMA64		0x1000
+#define  BCMA_IOST_GATED_CLK		0x2000
+#define  BCMA_IOST_BIST_ERROR		0x4000
+#define  BCMA_IOST_BIST_DONE		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/compat/linux/bcma/bcma_soc.h b/include/compat/linux/bcma/bcma_soc.h
new file mode 100755
index 0000000..4203c55
--- /dev/null
+++ b/include/compat/linux/bcma/bcma_soc.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_BCMA_SOC_H_
+#define LINUX_BCMA_SOC_H_
+
+#include <linux/bcma/bcma.h>
+
+struct bcma_soc {
+	struct bcma_bus bus;
+	struct bcma_device core_cc;
+	struct bcma_device core_mips;
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc);
+
+int bcma_bus_register(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_SOC_H_ */
diff --git a/include/compat/linux/bitops.h b/include/compat/linux/bitops.h
new file mode 100755
index 0000000..aa76af1
--- /dev/null
+++ b/include/compat/linux/bitops.h
@@ -0,0 +1,211 @@
+#ifndef _LINUX_BITOPS_H
+#define _LINUX_BITOPS_H
+#include <asm/types.h>
+
+#ifdef	__KERNEL__
+#define BIT(nr)			(1UL << (nr))
+#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITS_PER_BYTE		8
+#ifndef BITS_TO_LONGS /* Older kernels define this already */
+#define BITS_TO_LONGS(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#endif
+#endif
+
+extern unsigned int __sw_hweight8(unsigned int w);
+extern unsigned int __sw_hweight16(unsigned int w);
+extern unsigned int __sw_hweight32(unsigned int w);
+extern unsigned long __sw_hweight64(__u64 w);
+
+/*
+ * Include this here because some architectures need generic_ffs/fls in
+ * scope
+ */
+#include <asm/bitops.h>
+
+#define for_each_set_bit(bit, addr, size) \
+	for ((bit) = find_first_bit((addr), (size)); \
+	     (bit) < (size); \
+	     (bit) = find_next_bit((addr), (size), (bit) + 1))
+
+static __inline__ int get_bitmask_order(unsigned int count)
+{
+	int order;
+
+	order = fls(count);
+	return order;	/* We could be slightly more clever with -1 here... */
+}
+
+static __inline__ int get_count_order(unsigned int count)
+{
+	int order;
+
+	order = fls(count) - 1;
+	if (count & (count - 1))
+		order++;
+	return order;
+}
+
+static inline unsigned long hweight_long(unsigned long w)
+{
+	return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
+}
+
+/**
+ * rol32 - rotate a 32-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 rol32(__u32 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (32 - shift));
+}
+
+/**
+ * ror32 - rotate a 32-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 ror32(__u32 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (32 - shift));
+}
+
+/**
+ * rol16 - rotate a 16-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 rol16(__u16 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (16 - shift));
+}
+
+/**
+ * ror16 - rotate a 16-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 ror16(__u16 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (16 - shift));
+}
+
+/**
+ * rol8 - rotate an 8-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 rol8(__u8 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (8 - shift));
+}
+
+/**
+ * ror8 - rotate an 8-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 ror8(__u8 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (8 - shift));
+}
+
+/**
+ * sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit
+ * @value: value to sign extend
+ * @index: 0 based bit index (0<=index<32) to sign bit
+ */
+static inline __s32 sign_extend32(__u32 value, int index)
+{
+	__u8 shift = 31 - index;
+	return (__s32)(value << shift) >> shift;
+}
+
+static inline unsigned fls_long(unsigned long l)
+{
+	if (sizeof(l) == 4)
+		return fls(l);
+	return fls64(l);
+}
+
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+	if (((u32)word) == 0UL)
+		return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+	return __ffs((unsigned long)word);
+}
+
+#ifdef __KERNEL__
+#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first set bit.
+ */
+extern unsigned long find_first_bit(const unsigned long *addr,
+				    unsigned long size);
+
+/**
+ * find_first_zero_bit - find the first cleared bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first cleared bit.
+ */
+extern unsigned long find_first_zero_bit(const unsigned long *addr,
+					 unsigned long size);
+#endif /* CONFIG_GENERIC_FIND_FIRST_BIT */
+
+#ifdef CONFIG_GENERIC_FIND_LAST_BIT
+/**
+ * find_last_bit - find the last set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first set bit, or size.
+ */
+extern unsigned long find_last_bit(const unsigned long *addr,
+				   unsigned long size);
+#endif /* CONFIG_GENERIC_FIND_LAST_BIT */
+
+#ifdef CONFIG_GENERIC_FIND_NEXT_BIT
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ */
+extern unsigned long find_next_bit(const unsigned long *addr,
+				   unsigned long size, unsigned long offset);
+
+/**
+ * find_next_zero_bit - find the next cleared bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ */
+
+extern unsigned long find_next_zero_bit(const unsigned long *addr,
+					unsigned long size,
+					unsigned long offset);
+
+#endif /* CONFIG_GENERIC_FIND_NEXT_BIT */
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/compat/linux/compat-2.6.14.h b/include/compat/linux/compat-2.6.14.h
new file mode 100755
index 0000000..1f19f7f
--- /dev/null
+++ b/include/compat/linux/compat-2.6.14.h
@@ -0,0 +1,13 @@
+#ifndef LINUX_26_14_COMPAT_H
+#define LINUX_26_14_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.14 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14))
+
+typedef unsigned int gfp_t;
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)) */
+
+#endif /* LINUX_26_14_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.18.h b/include/compat/linux/compat-2.6.18.h
new file mode 100755
index 0000000..5e0182b
--- /dev/null
+++ b/include/compat/linux/compat-2.6.18.h
@@ -0,0 +1,13 @@
+#ifndef LINUX_26_18_COMPAT_H
+#define LINUX_26_18_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.18 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+
+#define roundup(x, y)	((((x) + ((y) - 1)) / (y)) * (y))
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) */
+
+#endif /* LINUX_26_18_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.19.h b/include/compat/linux/compat-2.6.19.h
new file mode 100755
index 0000000..1e648c0
--- /dev/null
+++ b/include/compat/linux/compat-2.6.19.h
@@ -0,0 +1,24 @@
+#ifndef LINUX_26_19_COMPAT_H
+#define LINUX_26_19_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.19 */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19))
+
+#include <linux/slab.h>
+
+static inline int
+compat_kmem_cache_destroy(struct kmem_cache *cachep)
+{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+	return kmem_cache_destroy(cachep);
+#else
+	kmem_cache_destroy(cachep);
+	return 0;
+#endif
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) */
+
+#endif /* LINUX_26_19_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.20.h b/include/compat/linux/compat-2.6.20.h
new file mode 100755
index 0000000..14579e2
--- /dev/null
+++ b/include/compat/linux/compat-2.6.20.h
@@ -0,0 +1,21 @@
+#ifndef LINUX_26_20_COMPAT_H
+#define LINUX_26_20_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.20 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+
+#include <linux/workqueue.h>
+
+typedef void (*work_func_t)(struct work_struct *work);
+typedef void (*compat_work_func_t)(void *work);
+static inline void (INIT_WORK)(struct work_struct *work, work_func_t func)
+{
+	INIT_WORK(work, (compat_work_func_t)func, work);
+}
+#undef INIT_WORK
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)) */
+
+#endif /* LINUX_26_20_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.21.h b/include/compat/linux/compat-2.6.21.h
new file mode 100755
index 0000000..89ed6d9
--- /dev/null
+++ b/include/compat/linux/compat-2.6.21.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_26_21_COMPAT_H
+#define LINUX_26_21_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.21 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
+
+#include <linux/sysctl.h>
+
+#define register_sysctl_table(table)				\
+	({							\
+		register_sysctl_table((table), 0);		\
+	})
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) */
+
+#endif /* LINUX_26_21_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.22.h b/include/compat/linux/compat-2.6.22.h
new file mode 100755
index 0000000..7ca1b18
--- /dev/null
+++ b/include/compat/linux/compat-2.6.22.h
@@ -0,0 +1,104 @@
+#ifndef LINUX_26_22_COMPAT_H
+#define LINUX_26_22_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.21 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22))
+
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+
+/* reuse ax25_ptr */
+#define ieee80211_ptr ax25_ptr
+
+#ifdef CONFIG_AX25
+#error Compat reuses the AX.25 pointer so that may not be enabled!
+#endif
+
+static inline unsigned char *skb_mac_header(const struct sk_buff *skb)
+{
+	return skb->mac.raw;
+}
+
+static inline void skb_set_mac_header(struct sk_buff *skb, int offset)
+{
+	skb->mac.raw = skb->data + offset;
+}
+
+static inline void skb_reset_mac_header(struct sk_buff *skb)
+{
+	skb->mac.raw = skb->data;
+}
+
+static inline void skb_reset_network_header(struct sk_buff *skb)
+{
+	skb->nh.raw = skb->data;
+}
+
+static inline void skb_set_network_header(struct sk_buff *skb, int offset)
+{
+	skb->nh.raw = skb->data + offset;
+}
+
+static inline void skb_set_transport_header(struct sk_buff *skb, int offset)
+{
+	skb->h.raw = skb->data + offset;
+}
+
+static inline unsigned char *skb_transport_header(struct sk_buff *skb)
+{
+	return skb->h.raw;
+}
+
+static inline unsigned char *skb_network_header(const struct sk_buff *skb)
+{
+	return skb->nh.raw;
+}
+
+static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
+{
+	return skb->tail;
+}
+
+static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
+{
+	return (struct iphdr *)skb_network_header(skb);
+}
+
+static inline void skb_copy_from_linear_data(const struct sk_buff *skb,
+					     void *to,
+					     const unsigned int len)
+{
+	memcpy(to, skb->data, len);
+}
+
+static inline void skb_copy_from_linear_data_offset(const struct sk_buff *skb,
+						    const int offset, void *to,
+						    const unsigned int len)
+{
+	memcpy(to, skb->data + offset, len);
+}
+
+#define __maybe_unused	__attribute__((unused))
+
+#define uninitialized_var(x) x = x
+
+/* This will lead to very weird behaviour... */
+#define NLA_BINARY NLA_STRING
+
+static inline int pci_set_mwi(struct pci_dev *dev)
+{
+	return -ENOSYS;
+}
+
+static inline void pci_clear_mwi(struct pci_dev *dev)
+{
+}
+
+#define list_first_entry(ptr, type, member) \
+        list_entry((ptr)->next, type, member)
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)) */
+
+#endif /* LINUX_26_22_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.23.h b/include/compat/linux/compat-2.6.23.h
new file mode 100755
index 0000000..766d4da
--- /dev/null
+++ b/include/compat/linux/compat-2.6.23.h
@@ -0,0 +1,136 @@
+#ifndef LINUX_26_23_COMPAT_H
+#define LINUX_26_23_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for < 2.6.23 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23))
+
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/genetlink.h>
+#include <net/sch_generic.h>
+
+/*
+ * Tell gcc if a function is cold. The compiler will assume any path
+ * directly leading to the call is unlikely.
+ */
+
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 3)
+/* Mark functions as cold. gcc will assume any path leading to a call
+ * to them will be unlikely.  This means a lot of manual unlikely()s
+ * are unnecessary now for any paths leading to the usual suspects
+ * like BUG(), printk(), panic() etc. [but let's keep them for now for
+ * older compilers]
+ *
+ * Early snapshots of gcc 4.3 don't support this and we can't detect this
+ * in the preprocessor, but we can live with this because they're unreleased.
+ * Maketime probing would be overkill here.
+ *
+ * gcc also has a __attribute__((__hot__)) to move hot functions into
+ * a special section, but I don't see any sense in this right now in
+ * the kernel context */
+#define __cold                  __attribute__((__cold__))
+#endif /* gcc 4.3 check */
+
+#ifndef __cold
+#define __cold
+#endif
+
+/* Added as of 2.6.23 in include/linux/netdevice.h */
+#define alloc_netdev_mq(sizeof_priv, name, setup, queue) \
+	alloc_netdev(sizeof_priv, name, setup)
+#define NETIF_F_MULTI_QUEUE 16384
+
+/* Added as of 2.6.23 on include/linux/netdevice.h */
+static inline int netif_is_multiqueue(const struct net_device *dev)
+{
+	return (!!(NETIF_F_MULTI_QUEUE & dev->features));
+}
+
+/* 2.6.23 fixed a bug in tcf_destroy_chain and the parameter changed */
+static inline void tcf_destroy_chain_compat(struct tcf_proto **fl)
+{
+	struct tcf_proto *tp;
+
+	while ((tp = *fl) != NULL) {
+		*fl = tp->next;
+		tp->ops->destroy(tp);
+		module_put(tp->ops->owner);
+		kfree(tp);
+	}
+}
+
+/* dev_mc_list was replaced with dev_addr_list as of 2.6.23,
+ * only new member added is da_synced. */
+#define dev_addr_list	dev_mc_list
+#define da_addr		dmi_addr
+#define da_addrlen	dmi_addrlen
+#define da_users	dmi_users
+#define da_gusers	dmi_gusers
+
+/* dev_set_promiscuity() was moved to __dev_set_promiscuity() on 2.6.23 and
+ * dev_set_promiscuity() became a wrapper. */
+#define __dev_set_promiscuity dev_set_promiscuity
+
+/* Our own 2.6.22 port on compat.c */
+extern void	dev_mc_unsync(struct net_device *to, struct net_device *from);
+extern int	dev_mc_sync(struct net_device *to, struct net_device *from);
+
+/* Our own 2.6.22 port on compat.c */
+extern void	__dev_set_rx_mode(struct net_device *dev);
+
+/* Simple to add this */
+extern int cancel_delayed_work_sync(struct delayed_work *work);
+
+#define cancel_delayed_work_sync cancel_rearming_delayed_work
+
+#define debugfs_rename(a, b, c, d) 1
+
+/* nl80211 requires multicast group support which is new and added on
+ * 2.6.23. We can't add support for it for older kernels to support it
+ * genl_family structure was changed. Lets just let through the
+ * genl_register_mc_group call. This means no multicast group suppport */
+
+#define genl_register_mc_group(a, b) 0
+
+/**
+ * struct genl_multicast_group - generic netlink multicast group
+ * @name: name of the multicast group, names are per-family
+ * @id: multicast group ID, assigned by the core, to use with
+ *	genlmsg_multicast().
+ * @list: list entry for linking
+ * @family: pointer to family, need not be set before registering
+ */
+struct genl_multicast_group
+{
+	struct genl_family      *family;        /* private */
+	struct list_head        list;           /* private */
+	char                    name[GENL_NAMSIZ];
+	u32                     id;
+};
+
+
+/* Added as of 2.6.23 */
+int pci_try_set_mwi(struct pci_dev *dev);
+
+/* Added as of 2.6.23 */
+#ifdef CONFIG_PM_SLEEP
+/*
+ * Tell the freezer that the current task should be frozen by it
+ */
+static inline void set_freezable(void)
+{
+	current->flags &= ~PF_NOFREEZE;
+}
+
+#else
+static inline void set_freezable(void) {}
+#endif /* CONFIG_PM_SLEEP */
+
+#else
+#define tcf_destroy_chain_compat tcf_destroy_chain
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) */
+
+#endif /* LINUX_26_23_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.24.h b/include/compat/linux/compat-2.6.24.h
new file mode 100755
index 0000000..c49c44d
--- /dev/null
+++ b/include/compat/linux/compat-2.6.24.h
@@ -0,0 +1,247 @@
+#ifndef LINUX_26_24_COMPAT_H
+#define LINUX_26_24_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.21, 2.6.22 and 2.6.23 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+
+#include <asm/atomic.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+
+#define KEY_BLUETOOTH	237
+#define KEY_WLAN	238
+#define KEY_UWB		239
+
+#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
+
+struct proc_dir_entry;
+struct net_device;
+struct net {
+	atomic_t		count;		/* To decided when the network
+						 *  namespace should be freed.
+						 */
+	atomic_t		use_count;	/* To track references we
+						 * destroy on demand
+						 */
+	struct list_head	list;		/* list of network namespaces */
+	struct work_struct	work;		/* work struct for freeing */
+
+	struct proc_dir_entry	*proc_net;
+	struct proc_dir_entry	*proc_net_stat;
+	struct proc_dir_entry	*proc_net_root;
+
+	struct net_device       *loopback_dev;          /* The loopback */
+
+	struct list_head	dev_base_head;
+	struct hlist_head	*dev_name_head;
+	struct hlist_head	*dev_index_head;
+};
+
+#ifdef CONFIG_NET
+/* Init's network namespace */
+extern struct net init_net;
+#define INIT_NET_NS(net_ns) .net_ns = &init_net,
+#else
+#define INIT_NET_NS(net_ns)
+#endif
+
+/* Added on 2.6.24 in include/linux/types.h by Al viro on commit 142956af */
+typedef unsigned long               uintptr_t;
+
+/* From include/linux/net.h */
+enum sock_shutdown_cmd {
+	SHUT_RD		= 0,
+	SHUT_WR		= 1,
+	SHUT_RDWR	= 2,
+};
+
+#if (LINUX_VERSION_CODE == KERNEL_VERSION(2,6,23)) /* Local check */
+/* Added as of 2.6.24 in include/linux/skbuff.h.
+ *
+ * Although 2.6.23 does support for CONFIG_NETDEVICES_MULTIQUEUE
+ * this helper was not added until 2.6.24. This implementation
+ * is exactly as it is on newer kernels.
+ *
+ * For older kernels we use the an internal mac80211 hack.
+ * For details see changes to include/net/mac80211.h through
+ * compat.diff and compat/mq_compat.h */
+static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+	return skb->queue_mapping;
+#else
+	return 0;
+#endif
+}
+#endif /* Local 2.6.23 check */
+
+/* On older kernels we handle this a bit differently, so we yield to that
+ * code for its implementation in mq_compat.h as we want to make
+ * use of the internal mac80211 __ieee80211_queue_stopped() which itself
+ * uses internal mac80211 data structure hacks. */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) /* Local check */
+/**
+ * netif_subqueue_stopped - test status of subqueue
+ * @dev: network device
+ * @queue_index: sub queue index
+ *
+ * Check individual transmit queue of a device with multiple transmit queues.
+ */
+static inline int __netif_subqueue_stopped(const struct net_device *dev,
+					u16 queue_index)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+	return test_bit(__LINK_STATE_XOFF,
+	&dev->egress_subqueue[queue_index].state);
+#else
+	return 0;
+#endif
+}
+
+/* Note: although the backport implementation for netif_subqueue_stopped
+ * on older kernels is identical to upstream __netif_subqueue_stopped()
+ * (except for a const qualifier) we implement netif_subqueue_stopped()
+ * as part of mac80211 as it relies on internal mac80211 structures we
+ * use for MQ support. We this implement it in mq_compat.h */
+
+#endif /* Local 2.6.23 check */
+
+/*
+ * Force link bug if constructor is used, can't be done compatibly
+ * because constructor arguments were swapped since then!
+ */
+extern void __incompatible_kmem_cache_create(void);
+
+/* 2.6.21 and 2.6.22 kmem_cache_create() takes 6 arguments */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23))
+#define kmem_cache_create(name, objsize, align, flags, ctor)	\
+	({							\
+		if (ctor) __incompatible_kmem_cache_create();	\
+		kmem_cache_create((name), (objsize), (align),	\
+				  (flags), NULL, NULL);		\
+	})
+#endif
+
+/* 2.6.23 kmem_cache_create() takes 5 arguments */
+#if (LINUX_VERSION_CODE == KERNEL_VERSION(2,6,23))
+#define kmem_cache_create(name, objsize, align, flags, ctor)	\
+	({							\
+		if (ctor) __incompatible_kmem_cache_create();	\
+		kmem_cache_create((name), (objsize), (align),	\
+				  (flags), NULL);		\
+	})
+#endif
+
+/* From include/linux/mod_devicetable.h */
+
+/* SSB core, see drivers/ssb/ */
+#ifndef SSB_DEVICE
+struct ssb_device_id {
+	__u16   vendor;
+	__u16   coreid;
+	__u8    revision;
+};
+#define SSB_DEVICE(_vendor, _coreid, _revision)  \
+	{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
+#define SSB_DEVTABLE_END  \
+	{ 0, },
+
+#define SSB_ANY_VENDOR          0xFFFF
+#define SSB_ANY_ID              0xFFFF
+#define SSB_ANY_REV             0xFF
+#endif
+
+
+/* Namespace stuff, introduced on 2.6.24 */
+#define dev_get_by_index(a, b)		dev_get_by_index(b)
+#define __dev_get_by_index(a, b)	__dev_get_by_index(b)
+
+extern int		eth_header(struct sk_buff *skb, struct net_device *dev,
+				unsigned short type, void *daddr,
+				void *saddr, unsigned len);
+extern int		eth_rebuild_header(struct sk_buff *skb);
+extern void		eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
+				unsigned char * haddr);
+extern int		eth_header_cache(struct neighbour *neigh,
+			struct hh_cache *hh);
+
+/* This structure is simply not present on 2.6.22 and 2.6.23 */
+struct header_ops {
+	int     (*create) (struct sk_buff *skb, struct net_device *dev,
+		unsigned short type, void *daddr,
+		void *saddr, unsigned len);
+	int     (*parse)(const struct sk_buff *skb, unsigned char *haddr);
+	int     (*rebuild)(struct sk_buff *skb);
+	#define HAVE_HEADER_CACHE
+	int     (*cache)(struct neighbour *neigh, struct hh_cache *hh);
+	void    (*cache_update)(struct hh_cache *hh,
+		struct net_device *dev,
+		unsigned char *haddr);
+};
+
+/* net/ieee80211/ieee80211_crypt_tkip uses sg_init_table. This was added on
+ * 2.6.24. CONFIG_DEBUG_SG was added in 2.6.24 as well, so lets just ignore
+ * the debug stuff. Note that adding this required changes to the struct
+ * scatterlist on include/asm/scatterlist*, so the right way to port this
+ * is to simply ignore the new structure changes and zero the scatterlist
+ * array. We lave the kdoc intact for reference.
+ */
+
+/**
+ * sg_mark_end - Mark the end of the scatterlist
+ * @sg:          SG entryScatterlist
+ *
+ * Description:
+ *   Marks the passed in sg entry as the termination point for the sg
+ *   table. A call to sg_next() on this entry will return NULL.
+ *
+ **/
+static inline void sg_mark_end(struct scatterlist *sg)
+{
+#ifdef CONFIG_DEBUG_SG
+	BUG_ON(sg->sg_magic != SG_MAGIC);
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+	/*
+	 * Set termination bit, clear potential chain bit
+	*/
+	sg->page_link |= 0x02;
+	sg->page_link &= ~0x01;
+#endif
+}
+
+/**
+ * sg_init_table - Initialize SG table
+ * @sgl:           The SG table
+ * @nents:         Number of entries in table
+ *
+ * Notes:
+ *   If this is part of a chained sg table, sg_mark_end() should be
+ *   used only on the last table part.
+ *
+ **/
+static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents)
+{
+	memset(sgl, 0, sizeof(*sgl) * nents);
+}
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) */
+
+#endif /* LINUX_26_24_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.25.h b/include/compat/linux/compat-2.6.25.h
new file mode 100755
index 0000000..ad3220a
--- /dev/null
+++ b/include/compat/linux/compat-2.6.25.h
@@ -0,0 +1,179 @@
+#ifndef LINUX_26_25_COMPAT_H
+#define LINUX_26_25_COMPAT_H
+
+#include <linux/version.h>
+
+/* Compat work for 2.6.24 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25))
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/hw_random.h>
+#include <linux/leds.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/pm.h>
+#include <asm-generic/bug.h>
+#include <linux/pm_qos_params.h>
+#include <linux/pci.h>
+
+/* The macro below uses a const upstream, this differs */
+
+/**
+ * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_PCI_DEVICE_TABLE(_table) \
+	const struct pci_device_id _table[] __devinitdata
+
+/*
+ * Backport work for QoS dependencies (kernel/pm_qos_params.c)
+ * pm-qos stuff written by mark gross mgross@linux.intel.com.
+ *
+ * ipw2100 now makes use of:
+ *
+ * pm_qos_add_requirement(),
+ * pm_qos_update_requirement() and
+ * pm_qos_remove_requirement() from it
+ *
+ * mac80211 uses the network latency to determine if to enable or not
+ * dynamic PS. mac80211 also and registers a notifier for when
+ * the latency changes. Since older kernels do no thave pm-qos stuff
+ * we just implement it completley here and register it upon cfg80211
+ * init. I haven't tested ipw2100 on 2.6.24 though.
+ *
+ * This pm-qos implementation is copied verbatim from the kernel
+ * written by mark gross mgross@linux.intel.com. You don't have
+ * to do anythinig to use pm-qos except use the same exported
+ * routines as used in newer kernels. The compat_pm_qos_power_init()
+ * defned below is used by the compat module to initialize pm-qos.
+ */
+int compat_pm_qos_power_init(void);
+int compat_pm_qos_power_deinit(void);
+
+/*
+ * 2.6.25 adds PM_EVENT_HIBERNATE as well here but
+ * we don't have this on <= 2.6.23)
+ */
+#ifndef PM_EVENT_SLEEP /* some distribution have mucked with their own headers to add this.. */
+#define PM_EVENT_SLEEP  (PM_EVENT_SUSPEND)
+#endif
+
+/* Although we don't care about wimax this is needed for rfkill input stuff */
+#define KEY_WIMAX		246
+
+/* Although pm_qos stuff is not implemented on <= 2.6.24 lets keep the define */
+#define PM_QOS_DEFAULT_VALUE -1
+
+#define __WARN(foo) dump_stack()
+
+#define dev_emerg(dev, format, arg...)          \
+	dev_printk(KERN_EMERG , dev , format , ## arg)
+#define dev_alert(dev, format, arg...)          \
+	dev_printk(KERN_ALERT , dev , format , ## arg)
+#define dev_crit(dev, format, arg...)           \
+	dev_printk(KERN_CRIT , dev , format , ## arg)
+
+extern int		__dev_addr_sync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count);
+extern void		__dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count);
+
+#define seq_file_net &init_net;
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING = 0,
+	NF_INET_LOCAL_IN = 1,
+	NF_INET_FORWARD = 2,
+	NF_INET_LOCAL_OUT = 3,
+	NF_INET_POST_ROUTING = 4,
+	NF_INET_NUMHOOKS = 5
+};
+
+/* The patch:
+ * commit 8b5f6883683c91ad7e1af32b7ceeb604d68e2865
+ * Author: Marcin Slusarz <marcin.slusarz@gmail.com>
+ * Date:   Fri Feb 8 04:20:12 2008 -0800
+ *
+ *     byteorder: move le32_add_cpu & friends from OCFS2 to core
+ *
+ * moves le*_add_cpu and be*_add_cpu functions from OCFS2 to core
+ * header (1st) and converted some existing code to it. We port
+ * it here as later kernels will most likely use it.
+ */
+static inline void le16_add_cpu(__le16 *var, u16 val)
+{
+	*var = cpu_to_le16(le16_to_cpu(*var) + val);
+}
+
+static inline void le32_add_cpu(__le32 *var, u32 val)
+{
+	*var = cpu_to_le32(le32_to_cpu(*var) + val);
+}
+
+static inline void le64_add_cpu(__le64 *var, u64 val)
+{
+	*var = cpu_to_le64(le64_to_cpu(*var) + val);
+}
+
+static inline void be16_add_cpu(__be16 *var, u16 val)
+{
+	u16 v = be16_to_cpu(*var);
+	*var = cpu_to_be16(v + val);
+}
+
+static inline void be32_add_cpu(__be32 *var, u32 val)
+{
+	u32 v = be32_to_cpu(*var);
+	*var = cpu_to_be32(v + val);
+}
+
+static inline void be64_add_cpu(__be64 *var, u64 val)
+{
+	u64 v = be64_to_cpu(*var);
+	*var = cpu_to_be64(v + val);
+}
+
+/* 2.6.25 changes hwrng_unregister()'s behaviour by supporting
+ * suspend of its parent device (the misc device, which is itself the
+ * hardware random number generator). It does this by passing a parameter to
+ * unregister_miscdev() which is not supported in older kernels. The suspend
+ * parameter allows us to enable access to the device's hardware
+ * number generator during suspend. As far as wireless is concerned this means
+ * if a driver goes to suspend it you won't have the HNR available in
+ * older kernels. */
+static inline void __hwrng_unregister(struct hwrng *rng, bool suspended)
+{
+	hwrng_unregister(rng);
+}
+
+static inline void led_classdev_unregister_suspended(struct led_classdev *lcd)
+{
+	led_classdev_unregister(lcd);
+}
+
+/**
+ * The following things are out of ./include/linux/kernel.h
+ * The new iwlwifi driver is using them.
+ */
+extern int strict_strtoul(const char *, unsigned int, unsigned long *);
+extern int strict_strtol(const char *, unsigned int, long *);
+
+#else
+/*
+ * Kernels >= 2.6.25 have pm-qos and its initialized as part of
+ * the bootup process
+ */
+static inline int compat_pm_qos_power_init(void)
+{
+	return 0;
+}
+
+static inline int compat_pm_qos_power_deinit(void)
+{
+	return 0;
+}
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)) */
+
+#endif /* LINUX_26_25_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.26.h b/include/compat/linux/compat-2.6.26.h
new file mode 100755
index 0000000..177792a
--- /dev/null
+++ b/include/compat/linux/compat-2.6.26.h
@@ -0,0 +1,455 @@
+#ifndef LINUX_26_26_COMPAT_H
+#define LINUX_26_26_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <net/sock.h>
+#include <linux/fs.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+#include <net/net_namespace.h>
+#endif
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <asm/div64.h>
+
+/* These jiffie helpers added as of 2.6.26 */
+
+/*
+ * These four macros compare jiffies and 'a' for convenience.
+ */
+
+/* time_is_before_jiffies(a) return true if a is before jiffies */
+#define time_is_before_jiffies(a) time_after(jiffies, a)
+
+/* time_is_after_jiffies(a) return true if a is after jiffies */
+#define time_is_after_jiffies(a) time_before(jiffies, a)
+
+/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
+#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
+
+/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
+#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
+
+/* This comes from include/linux/input.h */
+#define SW_RFKILL_ALL           0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+
+/* From kernel.h */
+#define USHORT_MAX      ((u16)(~0U))
+#define SHORT_MAX       ((s16)(USHORT_MAX>>1))
+#define SHORT_MIN       (-SHORT_MAX - 1)
+
+extern int dev_set_name(struct device *dev, const char *name, ...)
+			__attribute__((format(printf, 2, 3)));
+
+/**
+ * clamp - return a value clamped to a given range with strict typechecking
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does strict typechecking of min/max to make sure they are of the
+ * same type as val.  See the unnecessary pointer comparisons.
+ */
+#define clamp(val, min, max) ({			\
+	typeof(val) __val = (val);		\
+	typeof(min) __min = (min);		\
+	typeof(max) __max = (max);		\
+	(void) (&__val == &__min);		\
+	(void) (&__val == &__max);		\
+	__val = __val < __min ? __min: __val;	\
+	__val > __max ? __max: __val; })
+
+/**
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * 'type' to make all the comparisons.
+ */
+#define clamp_t(type, val, min, max) ({		\
+	type __val = (val);			\
+	type __min = (min);			\
+	type __max = (max);			\
+	__val = __val < __min ? __min: __val;	\
+	__val > __max ? __max: __val; })
+
+
+/* from include/linux/device.h */
+/* device_create_drvdata() is new */
+extern struct device *device_create_drvdata(struct class *cls,
+	struct device *parent,
+	dev_t devt,
+	void *drvdata,
+	const char *fmt, ...)
+__attribute__((format(printf, 5, 6)));
+
+/* This is from include/linux/list.h */
+
+/**
+ * list_is_singular - tests whether a list has just one entry.
+ * @head: the list to test.
+ */
+static inline int list_is_singular(const struct list_head *head)
+{
+	return !list_empty(head) && (head->next == head->prev);
+}
+
+/* This is from include/linux/device.h, which was added as of 2.6.26 */
+static inline const char *dev_name(struct device *dev)
+{
+	/* will be changed into kobject_name(&dev->kobj) in the near future */
+	return dev->bus_id;
+}
+
+/* This is from include/linux/kernel.h, which was added as of 2.6.26 */
+
+/**
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument 'val' is.  This is useful when val is an unsigned
+ * type and min and max are literals that will otherwise be assigned a signed
+ * integer type.
+ */
+
+#define clamp_val(val, min, max) ({             \
+	typeof(val) __val = (val);              \
+	typeof(val) __min = (min);              \
+	typeof(val) __max = (max);              \
+	__val = __val < __min ? __min: __val;   \
+	__val > __max ? __max: __val; })
+
+/* This comes from include/net/net_namespace.h */
+
+#ifdef CONFIG_NET_NS
+static inline
+int net_eq(const struct net *net1, const struct net *net2)
+{
+	return net1 == net2;
+}
+#else
+static inline
+int net_eq(const struct net *net1, const struct net *net2)
+{
+	return 1;
+}
+#endif
+
+static inline
+void dev_net_set(struct net_device *dev, struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	release_net(dev->nd_net);
+	dev->nd_net = hold_net(net);
+#endif
+}
+
+static inline
+struct net *sock_net(const struct sock *sk)
+{
+#ifdef CONFIG_NET_NS
+	return sk->sk_net;
+#else
+	return &init_net;
+#endif
+}
+
+/* This comes from include/linux/netdevice.h */
+
+/*
+ * Net namespace inlines
+ */
+static inline
+struct net *dev_net(const struct net_device *dev)
+{
+#ifdef CONFIG_NET_NS
+	/*
+	 * compat-wirelss backport note:
+	 * For older kernels we may just need to always return init_net,
+	 * not sure when we added dev->nd_net.
+	 */
+	return dev->nd_net;
+#else
+	return &init_net;
+#endif
+}
+
+
+/*
+ * 2.6.26 added its own unaligned API which the
+ * new drivers can use. Lets port it here by including it in older
+ * kernels and also deal with the architecture handling here.
+ */
+
+#ifdef CONFIG_ALPHA
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* alpha */
+#ifdef CONFIG_ARM
+
+/* arm */
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* arm */
+#ifdef CONFIG_AVR32
+
+/*
+ * AVR32 can handle some unaligned accesses, depending on the
+ * implementation.  The AVR32 AP implementation can handle unaligned
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+ *
+ * However, swapped word loads must be word-aligned so we can't
+ * optimize word loads in general.
+ */
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif
+#ifdef CONFIG_BLACKFIN
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* blackfin */
+#ifdef CONFIG_CRIS
+
+/*
+ * CRIS can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* cris */
+#ifdef CONFIG_FRV
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* frv */
+#ifdef CONFIG_H8300
+
+#include <linux/unaligned/be_memmove.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* h8300 */
+#ifdef  CONFIG_IA64
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* ia64 */
+#ifdef CONFIG_M32R
+
+#if defined(__LITTLE_ENDIAN__)
+# include <linux/unaligned/le_memmove.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+#else
+# include <linux/unaligned/be_memmove.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+#endif
+
+#endif /* m32r */
+#ifdef CONFIG_M68K /* this handles both m68k and m68knommu */
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#else
+
+/*
+ * The m68k can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+#endif
+
+#endif /* m68k and m68knommu */
+#ifdef CONFIG_MIPS
+
+#if defined(__MIPSEB__)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned  __get_unaligned_be
+# define put_unaligned  __put_unaligned_be
+#elif defined(__MIPSEL__)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+#endif
+
+#endif /* mips */
+#ifdef CONFIG_MN10300
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* mn10300 */
+#ifdef CONFIG_PARISC
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* parisc */
+#ifdef CONFIG_PPC
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* ppc */
+#ifdef CONFIG_S390
+
+/*
+ * The S390 can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* s390 */
+#ifdef CONFIG_SUPERH
+
+/* SH can't handle unaligned accesses. */
+#ifdef __LITTLE_ENDIAN__
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+#else
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+#endif
+
+#endif /* sh - SUPERH */
+#ifdef CONFIG_SPARC
+
+/* sparc and sparc64 */
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif  /* sparc */
+#ifdef CONFIG_UML
+
+#include "asm/arch/unaligned.h"
+
+#endif /* um - uml */
+#ifdef CONFIG_V850
+
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* v850 */
+#ifdef CONFIG_X86
+/*
+ * The x86 can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#endif /* x86 */
+#ifdef CONFIG_XTENSA
+
+#ifdef __XTENSA_EL__
+# include <linux/unaligned/le_memmove.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+#elif defined(__XTENSA_EB__)
+# include <linux/unaligned/be_memmove.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+#else
+# error processor byte order undefined!
+#endif
+
+#endif /* xtensa */
+
+#define PCIE_LINK_STATE_L0S	1
+#define PCIE_LINK_STATE_L1	2
+#define PCIE_LINK_STATE_CLKPM	4
+
+static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+}
+/* source: include/linux/pci-aspm.h */
+
+
+#if BITS_PER_LONG == 64
+
+/**
+ * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
+ *
+ * This is commonly provided by 32bit archs to provide an optimized 64bit
+ * divide.
+ */
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	*remainder = dividend % divisor;
+	return dividend / divisor;
+}
+
+#elif BITS_PER_LONG == 32
+
+#ifndef div_u64_rem
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	*remainder = do_div(dividend, divisor);
+	return dividend;
+}
+#endif
+
+#endif /* BITS_PER_LONG */
+
+/**
+ * div_u64 - unsigned 64bit divide with 32bit divisor
+ *
+ * This is the most common 64bit divide and should be used if possible,
+ * as many 32bit archs can optimize this variant better than a full 64bit
+ * divide.
+ */
+#ifndef div_u64
+static inline u64 div_u64(u64 dividend, u32 divisor)
+{
+	u32 remainder;
+	return div_u64_rem(dividend, divisor, &remainder);
+}
+#endif
+/* source: include/math64.h */
+
+#define hex_asc_lo(x)	hex_asc((x) & 0x0f)
+#define hex_asc_hi(x)	hex_asc(((x) & 0xf0) >> 4)
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) */
+
+#endif /* LINUX_26_26_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.27.h b/include/compat/linux/compat-2.6.27.h
new file mode 100755
index 0000000..22fadcd
--- /dev/null
+++ b/include/compat/linux/compat-2.6.27.h
@@ -0,0 +1,261 @@
+#ifndef LINUX_26_27_COMPAT_H
+#define LINUX_26_27_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+
+#include <linux/debugfs.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */
+#include <linux/netdevice.h>
+#include <linux/workqueue.h>
+#include <net/iw_handler.h>
+#include <asm-generic/bug.h>
+#include <linux/wireless.h>
+#include <linux/skbuff.h>
+#include <net/sch_generic.h>
+#include <linux/ethtool.h>
+
+#define PCI_PM_CAP_PME_SHIFT	11
+
+/* I can't find a more suitable replacement... */
+#define flush_work(work) cancel_work_sync(work)
+
+struct builtin_fw {
+	char *name;
+	void *data;
+	unsigned long size;
+};
+
+/*
+ * On older kernels we do not have net_device Multi Queue support, but
+ * since we no longer use MQ on mac80211 we can simply use the 0 queue.
+ * Note that if other fullmac drivers make use of this they then need
+ * to be backported somehow or deal with just 1 queueue from MQ.
+ */
+static inline void netif_tx_wake_all_queues(struct net_device *dev)
+{
+	netif_wake_queue(dev);
+}
+static inline void netif_tx_start_all_queues(struct net_device *dev)
+{
+	netif_start_queue(dev);
+}
+static inline void netif_tx_stop_all_queues(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+}
+
+/* Are all TX queues of the device empty?  */
+static inline bool qdisc_all_tx_empty(const struct net_device *dev)
+{
+	return skb_queue_empty(&dev->qdisc->q);
+}
+
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
+
+/*
+ * The net_device has a spin_lock on newer kernels, on older kernels we're out of luck
+ */
+#define netif_addr_lock_bh(dev)
+#define netif_addr_unlock_bh(dev)
+
+/*
+ * To port this properly we'd have to port warn_slowpath_null(),
+ * which I'm lazy to do so just do a regular print for now. If you
+ * want to port this read kernel/panic.c
+ */
+#define __WARN_printf(arg...)   do { printk(arg); __WARN(); } while (0)
+
+/* This is ported directly as-is on newer kernels */
+#ifndef WARN
+#define WARN(condition, format...) ({					\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf(format);					\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
+/* On 2.6.27 a second argument was added, on older kernels we ignore it */
+#define dma_mapping_error(pdev, dma_addr) dma_mapping_error(dma_addr)
+#define pci_dma_mapping_error(pdev, dma_addr) dma_mapping_error(pdev, dma_addr)
+
+/* This is from include/linux/ieee80211.h */
+#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
+
+/* New link list changes added as of 2.6.27, needed for ath9k */
+
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
+
+/* __list_splice as re-implemented on 2.6.27, we backport it */
+static inline void __compat_list_splice_new_27(const struct list_head *list,
+				 struct list_head *prev,
+				 struct list_head *next)
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+
+	first->prev = prev;
+	prev->next = first;
+
+	last->next = next;
+	next->prev = last;
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__compat_list_splice_new_27(list, head->prev, head);
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__compat_list_splice_new_27(list, head->prev, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */
+
+#define iwe_stream_add_value(info, event, value, ends, iwe, event_len) iwe_stream_add_value(event, value, ends, iwe, event_len)
+#define iwe_stream_add_point(info, stream, ends, iwe, extra) iwe_stream_add_point(stream, ends, iwe, extra)
+#define iwe_stream_add_event(info, stream, ends, iwe, event_len) iwe_stream_add_event(stream, ends, iwe, event_len)
+
+/* Flags available in struct iw_request_info */
+#define IW_REQUEST_FLAG_COMPAT	0x0001	/* Compat ioctl call */
+
+static inline int iwe_stream_lcp_len(struct iw_request_info *info)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_LCP_LEN;
+#endif
+	return IW_EV_LCP_LEN;
+}
+
+#ifdef CONFIG_ARM
+
+/*
+ * The caller asks to handle a range between offset and offset + size,
+ * but we process a larger range from 0 to offset + size due to lack of
+ * offset support.
+ */
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t handle, unsigned long offset, size_t size,
+		enum dma_data_direction dir)
+{
+	dma_sync_single_for_cpu(dev, handle, offset + size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t handle, unsigned long offset, size_t size,
+		enum dma_data_direction dir)
+{
+	dma_sync_single_for_device(dev, handle, offset + size, dir);
+}
+
+#endif /* arm */
+
+#if defined(CONFIG_DEBUG_FS)
+void debugfs_remove_recursive(struct dentry *dentry);
+#else
+static inline void debugfs_remove_recursive(struct dentry *dentry)
+{ }
+#endif
+
+#define device_create(cls, parent, devt, drvdata, fmt, ...)		\
+({									\
+	struct device *_dev;						\
+	_dev = (device_create)(cls, parent, devt, fmt, __VA_ARGS__);	\
+	dev_set_drvdata(_dev, drvdata);					\
+	_dev;								\
+})
+
+#define dev_name(dev) dev_name((struct device *)dev)
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+	ep->speed = (__u16)speed;
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return ep->speed;
+}
+
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27)) */
+
+#endif /* LINUX_26_27_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.28.h b/include/compat/linux/compat-2.6.28.h
new file mode 100755
index 0000000..c92c8b4
--- /dev/null
+++ b/include/compat/linux/compat-2.6.28.h
@@ -0,0 +1,247 @@
+#ifndef LINUX_26_28_COMPAT_H
+#define LINUX_26_28_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28))
+
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/usb.h>
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E      /* Port Access Entity (IEEE 802.1X) */
+#endif
+
+#include <linux/pci.h>
+
+#ifndef WARN_ONCE
+#define WARN_ONCE(condition, format...) ({                      \
+	static int __warned;                                    \
+	int __ret_warn_once = !!(condition);                    \
+								\
+	if (unlikely(__ret_warn_once))                          \
+		if (WARN(!__warned, format))                    \
+			__warned = 1;                           \
+	unlikely(__ret_warn_once);                              \
+})
+#endif /* From include/asm-generic/bug.h */
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#ifdef pcmcia_parse_tuple
+#undef pcmcia_parse_tuple
+#define pcmcia_parse_tuple(tuple, parse) pccard_parse_tuple(tuple, parse)
+#endif
+
+/* From : include/pcmcia/ds.h */
+/* loop CIS entries for valid configuration */
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+		       int	(*conf_check)	(struct pcmcia_device *p_dev,
+						 cistpl_cftable_entry_t *cfg,
+						 cistpl_cftable_entry_t *dflt,
+						 unsigned int vcc,
+						 void *priv_data),
+		       void *priv_data);
+
+#endif /* CONFIG_PCMCIA */
+
+/* USB anchors were added as of 2.6.23 */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23))
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+#if 0
+extern void usb_poison_urb(struct urb *urb);
+#endif
+extern void usb_unpoison_urb(struct urb *urb);
+
+#if 0
+extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
+#endif
+
+extern int usb_anchor_empty(struct usb_anchor *anchor);
+#endif /* CONFIG_USB */
+#endif
+
+
+void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
+
+/**
+ *	skb_queue_is_last - check if skb is the last entry in the queue
+ *	@list: queue head
+ *	@skb: buffer
+ *
+ *	Returns true if @skb is the last buffer on the list.
+ */
+static inline bool skb_queue_is_last(const struct sk_buff_head *list,
+				     const struct sk_buff *skb)
+{
+	return (skb->next == (struct sk_buff *) list);
+}
+
+/**
+ *	skb_queue_next - return the next packet in the queue
+ *	@list: queue head
+ *	@skb: current buffer
+ *
+ *	Return the next packet in @list after @skb.  It is only valid to
+ *	call this if skb_queue_is_last() evaluates to false.
+ */
+static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list,
+                                             const struct sk_buff *skb)
+{
+	/* This BUG_ON may seem severe, but if we just return then we
+	 * are going to dereference garbage.
+	 */
+	BUG_ON(skb_queue_is_last(list, skb));
+	return skb->next;
+}
+
+/**
+ *	__skb_queue_head_init - initialize non-spinlock portions of sk_buff_head
+ *	@list: queue to initialize
+ *
+ *	This initializes only the list and queue length aspects of
+ *	an sk_buff_head object.  This allows to initialize the list
+ *	aspects of an sk_buff_head without reinitializing things like
+ *	the spinlock.  It can also be used for on-stack sk_buff_head
+ *	objects where the spinlock is known to not be used.
+ */
+static inline void __skb_queue_head_init(struct sk_buff_head *list)
+{
+	list->prev = list->next = (struct sk_buff *)list;
+	list->qlen = 0;
+}
+
+static inline void __skb_queue_splice(const struct sk_buff_head *list,
+				      struct sk_buff *prev,
+				      struct sk_buff *next)
+{
+	struct sk_buff *first = list->next;
+	struct sk_buff *last = list->prev;
+
+	first->prev = prev;
+	prev->next = first;
+
+	last->next = next;
+	next->prev = last;
+}
+
+/**
+ *	skb_queue_splice - join two skb lists, this is designed for stacks
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ */
+static inline void skb_queue_splice(const struct sk_buff_head *list,
+				    struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
+		head->qlen += list->qlen;
+	}
+}
+
+/**
+ *	skb_queue_splice - join two skb lists and reinitialise the emptied list
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ *
+ *	The list at @list is reinitialised
+ */
+static inline void skb_queue_splice_init(struct sk_buff_head *list,
+					 struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
+		head->qlen += list->qlen;
+		__skb_queue_head_init(list);
+	}
+}
+
+/**
+ *	skb_queue_splice_tail - join two skb lists and reinitialise the emptied list
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ *
+ *	Each of the lists is a queue.
+ *	The list at @list is reinitialised
+ */
+static inline void skb_queue_splice_tail_init(struct sk_buff_head *list,
+					      struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
+		head->qlen += list->qlen;
+		__skb_queue_head_init(list);
+	}
+} /* From include/linux/skbuff.h */
+
+/**
+ *	skb_queue_splice_tail - join two skb lists, each list being a queue
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ */
+static inline void skb_queue_splice_tail(const struct sk_buff_head *list,
+					 struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
+		head->qlen += list->qlen;
+	}
+}
+
+#ifndef DECLARE_TRACE
+
+#define TP_PROTO(args...)	args
+#define TP_ARGS(args...)		args
+
+#define DECLARE_TRACE(name, proto, args)				\
+	static inline void _do_trace_##name(struct tracepoint *tp, proto) \
+	{ }								\
+	static inline void trace_##name(proto)				\
+	{ }								\
+	static inline int register_trace_##name(void (*probe)(proto))	\
+	{								\
+		return -ENOSYS;						\
+	}								\
+	static inline int unregister_trace_##name(void (*probe)(proto))	\
+	{								\
+		return -ENOSYS;						\
+	}
+
+#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)
+#define EXPORT_TRACEPOINT_SYMBOL(name)
+
+
+#endif
+
+/* openSuse includes round_jiffies_up in it's kernel 2.6.27.
+ * This is needed to prevent conflicts with the openSuse definition.
+ */
+#define round_jiffies_up backport_round_jiffies_up
+
+unsigned long round_jiffies_up(unsigned long j);
+
+extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
+			    int off, int size);
+
+#define wake_up_interruptible_poll(x, m)			\
+	__wake_up(x, TASK_INTERRUPTIBLE, 1, (void *) (m))
+
+extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg);
+
+int pci_wake_from_d3(struct pci_dev *dev, bool enable);
+
+#define alloc_workqueue(name, flags, max_active) __create_workqueue(name, flags, max_active)
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)) */
+
+#endif /* LINUX_26_28_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.29.h b/include/compat/linux/compat-2.6.29.h
new file mode 100755
index 0000000..bc27772
--- /dev/null
+++ b/include/compat/linux/compat-2.6.29.h
@@ -0,0 +1,324 @@
+#ifndef LINUX_26_29_COMPAT_H
+#define LINUX_26_29_COMPAT_H
+
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/if_link.h>
+
+/*
+ * I kow this looks odd.. but 2.6.32 added the netdev_tx_t
+ * and we backport that there so inlcude that header first
+ * as we need it for the netdev ops.
+ */
+#include <linux/compat-2.6.32.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29))
+
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+
+#define  PCI_EXP_LNKCTL_ES     0x0080  /* Extended Synch */
+
+/*
+ * Older kernels do not have struct net_device_ops but what we can
+ * do is just define the data structure and use a caller to let us
+ * set the data structure's routines onto the old netdev, essentially
+ * doing it the old way. This avoids huge deltas on our backports.
+ */
+
+/*
+ * This structure defines the management hooks for network devices.
+ * The following hooks can be defined; unless noted otherwise, they are
+ * optional and can be filled with a null pointer.
+ *
+ * int (*ndo_init)(struct net_device *dev);
+ *     This function is called once when network device is registered.
+ *     The network device can use this to any late stage initializaton
+ *     or semantic validattion. It can fail with an error code which will
+ *     be propogated back to register_netdev
+ *
+ * void (*ndo_uninit)(struct net_device *dev);
+ *     This function is called when device is unregistered or when registration
+ *     fails. It is not called if init fails.
+ *
+ * int (*ndo_open)(struct net_device *dev);
+ *     This function is called when network device transistions to the up
+ *     state.
+ *
+ * int (*ndo_stop)(struct net_device *dev);
+ *     This function is called when network device transistions to the down
+ *     state.
+ *
+ * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
+ *                               struct net_device *dev);
+ *	Called when a packet needs to be transmitted.
+ *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY.
+ *        (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX)
+ *	Required can not be NULL.
+ *
+ * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
+ *	Called to decide which queue to when device supports multiple
+ *	transmit queues.
+ *
+ * void (*ndo_change_rx_flags)(struct net_device *dev, int flags);
+ *	This function is called to allow device receiver to make
+ *	changes to configuration when multicast or promiscious is enabled.
+ *
+ * void (*ndo_set_rx_mode)(struct net_device *dev);
+ *	This function is called device changes address list filtering.
+ *
+ * void (*ndo_set_multicast_list)(struct net_device *dev);
+ *	This function is called when the multicast address list changes.
+ *
+ * int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
+ *	This function  is called when the Media Access Control address
+ *	needs to be changed. If this interface is not defined, the
+ *	mac address can not be changed.
+ *
+ * int (*ndo_validate_addr)(struct net_device *dev);
+ *	Test if Media Access Control address is valid for the device.
+ *
+ * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
+ *	Called when a user request an ioctl which can't be handled by
+ *	the generic interface code. If not defined ioctl's return
+ *	not supported error code.
+ *
+ * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map);
+ *	Used to set network devices bus interface parameters. This interface
+ *	is retained for legacy reason, new devices should use the bus
+ *	interface (PCI) for low level management.
+ *
+ * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu);
+ *	Called when a user wants to change the Maximum Transfer Unit
+ *	of a device. If not defined, any request to change MTU will
+ *	will return an error.
+ *
+ * void (*ndo_tx_timeout)(struct net_device *dev);
+ *	Callback uses when the transmitter has not made any progress
+ *	for dev->watchdog ticks.
+ *
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+ *	Called when a user wants to get the network device usage
+ *	statistics. If not defined, the counters in dev->stats will
+ *	be used.
+ *
+ * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp);
+ *	If device support VLAN receive accleration
+ *	(ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called
+ *	when vlan groups for the device changes.  Note: grp is NULL
+ *	if no vlan's groups are being used.
+ *
+ * void (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is registered.
+ *
+ * void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is unregistered.
+ *
+ * void (*ndo_poll_controller)(struct net_device *dev);
+ *
+ *	SR-IOV management functions.
+ * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
+ * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
+ * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
+ * int (*ndo_get_vf_config)(struct net_device *dev,
+ *			    int vf, struct ifla_vf_info *ivf);
+ */
+#define HAVE_NET_DEVICE_OPS
+struct net_device_ops {
+	int			(*ndo_init)(struct net_device *dev);
+	void			(*ndo_uninit)(struct net_device *dev);
+	int			(*ndo_open)(struct net_device *dev);
+	int			(*ndo_stop)(struct net_device *dev);
+	netdev_tx_t		(*ndo_start_xmit) (struct sk_buff *skb,
+						   struct net_device *dev);
+	u16			(*ndo_select_queue)(struct net_device *dev,
+						    struct sk_buff *skb);
+	void			(*ndo_change_rx_flags)(struct net_device *dev,
+						       int flags);
+	void			(*ndo_set_rx_mode)(struct net_device *dev);
+	void			(*ndo_set_multicast_list)(struct net_device *dev);
+	int			(*ndo_set_mac_address)(struct net_device *dev,
+						       void *addr);
+	int			(*ndo_validate_addr)(struct net_device *dev);
+	int			(*ndo_do_ioctl)(struct net_device *dev,
+					        struct ifreq *ifr, int cmd);
+	int			(*ndo_set_config)(struct net_device *dev,
+					          struct ifmap *map);
+	int			(*ndo_change_mtu)(struct net_device *dev,
+						  int new_mtu);
+	int			(*ndo_neigh_setup)(struct net_device *dev,
+						   struct neigh_parms *);
+	void			(*ndo_tx_timeout) (struct net_device *dev);
+
+	struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+
+	void			(*ndo_vlan_rx_register)(struct net_device *dev,
+						        struct vlan_group *grp);
+	void			(*ndo_vlan_rx_add_vid)(struct net_device *dev,
+						       unsigned short vid);
+	void			(*ndo_vlan_rx_kill_vid)(struct net_device *dev,
+						        unsigned short vid);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	void                    (*ndo_poll_controller)(struct net_device *dev);
+#endif
+	int			(*ndo_set_vf_mac)(struct net_device *dev,
+						  int queue, u8 *mac);
+	int			(*ndo_set_vf_vlan)(struct net_device *dev,
+						   int queue, u16 vlan, u8 qos);
+	int			(*ndo_set_vf_tx_rate)(struct net_device *dev,
+						      int vf, int rate);
+/*
+ * The struct ifla_vf_info was added via b280da8d54b8d82b52f368a8703b7ada6c1744d5
+ * on the v2.6.34-rc1~233^2~338 release
+ */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34))
+	int			(*ndo_get_vf_config)(struct net_device *dev,
+						     int vf,
+						     struct ifla_vf_info *ivf);
+#endif
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+	int			(*ndo_fcoe_enable)(struct net_device *dev);
+	int			(*ndo_fcoe_disable)(struct net_device *dev);
+	int			(*ndo_fcoe_ddp_setup)(struct net_device *dev,
+						      u16 xid,
+						      struct scatterlist *sgl,
+						      unsigned int sgc);
+	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
+						     u16 xid);
+#define NETDEV_FCOE_WWNN 0
+#define NETDEV_FCOE_WWPN 1
+	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
+						    u64 *wwn, int type);
+#endif
+};
+
+void netdev_attach_ops(struct net_device *dev,
+		       const struct net_device_ops *ops);
+
+/**
+ *	skb_queue_is_first - check if skb is the first entry in the queue
+ *	@list: queue head
+ *	@skb: buffer
+ *
+ *	Returns true if @skb is the first buffer on the list.
+ */
+static inline bool skb_queue_is_first(const struct sk_buff_head *list,
+				      const struct sk_buff *skb)
+{
+	return (skb->prev == (struct sk_buff *) list);
+}
+
+/**
+ *	skb_queue_prev - return the prev packet in the queue
+ *	@list: queue head
+ *	@skb: current buffer
+ *
+ *	Return the prev packet in @list before @skb.  It is only valid to
+ *	call this if skb_queue_is_first() evaluates to false.
+ */
+static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list,
+					     const struct sk_buff *skb)
+{
+	/* This BUG_ON may seem severe, but if we just return then we
+	 * are going to dereference garbage.
+	 */
+	BUG_ON(skb_queue_is_first(list, skb));
+	return skb->prev;
+}
+
+
+static inline struct net_device_stats *dev_get_stats(struct net_device *dev)
+{
+	return dev->get_stats(dev);
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23))
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
+#endif /* CONFIG_USB */
+#endif
+
+#define DIV_ROUND_CLOSEST(x, divisor)(			\
+{							\
+	typeof(divisor) __divisor = divisor;		\
+	(((x) + ((__divisor) / 2)) / (__divisor));	\
+}							\
+)
+
+extern int eth_mac_addr(struct net_device *dev, void *p);
+extern int eth_change_mtu(struct net_device *dev, int new_mtu);
+extern int eth_validate_addr(struct net_device *dev);
+
+#ifdef CONFIG_NET_NS
+
+static inline void write_pnet(struct net **pnet, struct net *net)
+{
+	*pnet = net;
+}
+
+static inline struct net *read_pnet(struct net * const *pnet)
+{
+	return *pnet;
+}
+
+#else
+
+#define write_pnet(pnet, net)	do { (void)(net);} while (0)
+#define read_pnet(pnet)		(&init_net)
+
+/*
+ * swap - swap value of @a and @b
+ */
+#define swap(a, b) \
+	do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
+
+#endif
+
+extern int		init_dummy_netdev(struct net_device *dev);
+
+#define compat_pci_suspend(fn)						\
+	int fn##_compat(struct pci_dev *pdev, pm_message_t state)	\
+	{								\
+		int r;							\
+									\
+		r = fn(&pdev->dev);					\
+		if (r)							\
+			return r;					\
+									\
+		pci_save_state(pdev);					\
+		pci_disable_device(pdev);				\
+		pci_set_power_state(pdev, PCI_D3hot);			\
+									\
+		return 0;						\
+	}
+
+#define compat_pci_resume(fn)						\
+	int fn##_compat(struct pci_dev *pdev)				\
+	{								\
+		int r;							\
+									\
+		pci_set_power_state(pdev, PCI_D0);			\
+		r = pci_enable_device(pdev);				\
+		if (r)							\
+			return r;					\
+		pci_restore_state(pdev);				\
+									\
+		return fn(&pdev->dev);					\
+	}
+
+#else
+
+static inline void netdev_attach_ops(struct net_device *dev,
+		       const struct net_device_ops *ops)
+{
+	dev->netdev_ops = ops;
+}
+
+#define compat_pci_suspend(fn)
+#define compat_pci_resume(fn)
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29)) */
+
+#endif /*  LINUX_26_29_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.30.h b/include/compat/linux/compat-2.6.30.h
new file mode 100755
index 0000000..28f3d54
--- /dev/null
+++ b/include/compat/linux/compat-2.6.30.h
@@ -0,0 +1,47 @@
+#ifndef LINUX_26_30_COMPAT_H
+#define LINUX_26_30_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
+
+#include <linux/device.h>
+
+#ifndef TP_PROTO
+#define TP_PROTO(args...)	TPPROTO(args)
+#endif
+#ifndef TP_ARGS
+#define TP_ARGS(args...)	TPARGS(args)
+#endif
+
+#define IRQ_WAKE_THREAD	(2)
+
+/* From : include/linux/pm.h */
+/* How to reorder dpm_list after device_move() */
+enum dpm_order {
+	DPM_ORDER_NONE,
+	DPM_ORDER_DEV_AFTER_PARENT,
+	DPM_ORDER_PARENT_BEFORE_DEV,
+	DPM_ORDER_DEV_LAST,
+};
+
+static inline void dev_set_uevent_suppress(struct device *dev, int val)
+{
+	dev->uevent_suppress = val;
+}
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({			\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(x);			\
+	}					\
+})
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) */
+
+#endif /* LINUX_26_30_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.31.h b/include/compat/linux/compat-2.6.31.h
new file mode 100755
index 0000000..25db973
--- /dev/null
+++ b/include/compat/linux/compat-2.6.31.h
@@ -0,0 +1,221 @@
+#ifndef LINUX_26_31_COMPAT_H
+#define LINUX_26_31_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31))
+
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <net/dst.h>
+#include <net/genetlink.h>
+#include <linux/ethtool.h>
+
+/*
+ * These macros allow us to backport rfkill without any
+ * changes on cfg80211 through compat.diff. Note that this
+ * file will be included by rfkill_backport.h so we must
+ * not conflict with things there.
+ */
+#define rfkill_get_led_trigger_name	backport_rfkill_get_led_trigger_name
+#define rfkill_set_led_trigger_name	backport_rfkill_set_led_trigger_name
+#define rfkill_set_hw_state	backport_rfkill_set_hw_state
+#define rfkill_set_sw_state	backport_rfkill_set_sw_state
+#define rfkill_init_sw_state	backport_rfkill_init_sw_state
+#define rfkill_set_states	backport_rfkill_set_states
+#define rfkill_pause_polling	backport_rfkill_pause_polling
+#define rfkill_resume_polling	backport_rfkill_resume_polling
+#define rfkill_blocked		backport_rfkill_blocked
+#define rfkill_alloc		backport_rfkill_alloc
+#define rfkill_register		backport_rfkill_register
+#define rfkill_unregister	backport_rfkill_unregister
+#define rfkill_destroy		backport_rfkill_destroy
+
+#ifndef ERFKILL
+#if !defined(CONFIG_ALPHA) && !defined(CONFIG_MIPS) && !defined(CONFIG_PARISC) && !defined(CONFIG_SPARC)
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+#endif
+#ifdef CONFIG_ALPHA
+#define ERFKILL		138	/* Operation not possible due to RF-kill */
+#endif
+#ifdef CONFIG_MIPS
+#define ERFKILL		167	/* Operation not possible due to RF-kill */
+#endif
+#ifdef CONFIG_PARISC
+#define ERFKILL		256	/* Operation not possible due to RF-kill */
+#endif
+#ifdef CONFIG_SPARC
+#define ERFKILL		134	/* Operation not possible due to RF-kill */
+#endif
+#endif
+
+#ifndef NETDEV_PRE_UP
+#define NETDEV_PRE_UP		0x000D
+#endif
+
+#ifndef SDIO_DEVICE_ID_MARVELL_8688WLAN
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
+#endif
+
+struct compat_threaded_irq {
+	unsigned int irq;
+	irq_handler_t handler;
+	irq_handler_t thread_fn;
+	void *dev_id;
+	char wq_name[64];
+	struct workqueue_struct *wq;
+	struct work_struct work;
+};
+
+/*
+ * kmemleak was introduced on 2.6.31, since older kernels do not have
+ * we simply ignore its tuning.
+ */
+static inline void kmemleak_ignore(const void *ptr)
+{
+	return;
+}
+
+static inline void kmemleak_not_leak(const void *ptr)
+{
+	return;
+}
+
+static inline void kmemleak_no_scan(const void *ptr)
+{
+	return;
+}
+
+/*
+ * Added via adf30907d63893e4208dfe3f5c88ae12bc2f25d5
+ *
+ * There is no _sk_dst on older kernels, so just set the
+ * old dst to NULL and release it directly.
+ */
+static inline void skb_dst_drop(struct sk_buff *skb)
+{
+	dst_release(skb->dst);
+	skb->dst = NULL;
+}
+
+static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
+{
+	return (struct dst_entry *)skb->dst;
+}
+
+static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
+{
+	skb->dst = dst;
+}
+
+static inline struct rtable *skb_rtable(const struct sk_buff *skb)
+{
+	return (struct rtable *)skb_dst(skb);
+}
+
+/* Backport threaded IRQ support */
+
+static inline
+void compat_irq_work(struct work_struct *work)
+{
+	struct compat_threaded_irq *comp = container_of(work, struct compat_threaded_irq, work);
+	comp->thread_fn(comp->irq, comp->dev_id);
+}
+
+static inline
+irqreturn_t compat_irq_dispatcher(int irq, void *dev_id)
+{
+	struct compat_threaded_irq *comp = dev_id;
+	irqreturn_t res;
+
+	res = comp->handler(irq, comp->dev_id);
+	if (res == IRQ_WAKE_THREAD) {
+		queue_work(comp->wq, &comp->work);
+		res = IRQ_HANDLED;
+	}
+
+	return res;
+}
+
+static inline
+int compat_request_threaded_irq(struct compat_threaded_irq *comp,
+				unsigned int irq,
+				irq_handler_t handler,
+				irq_handler_t thread_fn,
+				unsigned long flags,
+				const char *name,
+				void *dev_id)
+{
+	comp->irq = irq;
+	comp->handler = handler;
+	comp->thread_fn = thread_fn;
+	comp->dev_id = dev_id;
+	INIT_WORK(&comp->work, compat_irq_work);
+
+	if (!comp->wq) {
+		snprintf(comp->wq_name, sizeof(comp->wq_name),
+			 "compirq/%u-%s", irq, name);
+		comp->wq = create_singlethread_workqueue(comp->wq_name);
+		if (!comp->wq) {
+			printk(KERN_ERR "Failed to create compat-threaded-IRQ workqueue %s\n",
+			       comp->wq_name);
+			return -ENOMEM;
+		}
+	}
+	return request_irq(irq, compat_irq_dispatcher, flags, name, comp);
+}
+
+static inline
+void compat_free_threaded_irq(struct compat_threaded_irq *comp)
+{
+	free_irq(comp->irq, comp);
+}
+
+static inline
+void compat_destroy_threaded_irq(struct compat_threaded_irq *comp)
+{
+	if (comp->wq)
+		destroy_workqueue(comp->wq);
+	comp->wq = NULL;
+}
+
+static inline
+void compat_synchronize_threaded_irq(struct compat_threaded_irq *comp)
+{
+	synchronize_irq(comp->irq);
+	cancel_work_sync(&comp->work);
+}
+
+/**
+ * list_entry_rcu - get the struct for this entry
+ * @ptr:        the &struct list_head pointer.
+ * @type:       the type of the struct this is embedded in.
+ * @member:     the name of the list_struct within the struct.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_entry_rcu(ptr, type, member) \
+	container_of(rcu_dereference(ptr), type, member)
+
+#define skb_walk_frags(skb, iter)	\
+	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
+
+#ifndef CONFIG_64BIT
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+extern long long atomic64_read(const atomic64_t *v);
+extern long long atomic64_add_return(long long a, atomic64_t *v);
+
+#define atomic64_inc_return(v)          atomic64_add_return(1LL, (v))
+
+#endif
+
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)) */
+
+#endif /* LINUX_26_31_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.32.h b/include/compat/linux/compat-2.6.32.h
new file mode 100755
index 0000000..3506291
--- /dev/null
+++ b/include/compat/linux/compat-2.6.32.h
@@ -0,0 +1,129 @@
+#ifndef LINUX_26_32_COMPAT_H
+#define LINUX_26_32_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32))
+
+#include <linux/netdevice.h>
+#include <linux/compat.h>
+#include <net/iw_handler.h>
+#include <linux/workqueue.h>
+#include <net/genetlink.h>
+
+#define SDIO_VENDOR_ID_INTEL			0x0089
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS	0x1405
+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
+
+static inline void flush_delayed_work(struct delayed_work *dwork)
+{
+	if (del_timer_sync(&dwork->timer)) {
+		/*
+		 * This is what would happen on 2.6.32 but since we don't have
+		 * access to the singlethread_cpu we can't really backport this,
+		 * so avoid really *flush*ing the work... Oh well. Any better ideas?
+
+		struct cpu_workqueue_struct *cwq;
+		cwq = wq_per_cpu(keventd_wq, get_cpu());
+		__queue_work(cwq, &dwork->work);
+		put_cpu();
+
+		*/
+	}
+	flush_work(&dwork->work);
+}
+
+/*
+ * struct genl_multicast_group was made netns aware through
+ * patch "genetlink: make netns aware" by johannes, we just
+ * force this to always use the default init_net
+ */
+#define genl_info_net(x) &init_net
+/* Just use init_net for older kernels */
+#define get_net_ns_by_pid(x) &init_net
+
+/* net namespace is lost */
+#define genlmsg_multicast_netns(a, b, c, d, e)	genlmsg_multicast(b, c, d, e)
+#define genlmsg_multicast_allns(a, b, c, d)	genlmsg_multicast(a, b, c, d)
+#define genlmsg_unicast(net, skb, pid)	genlmsg_unicast(skb, pid)
+
+#define dev_change_net_namespace(a, b, c) (-EOPNOTSUPP)
+
+#define SET_NETDEV_DEVTYPE(netdev, type)
+
+#ifdef __KERNEL__
+/* Driver transmit return codes */
+enum netdev_tx {
+	BACKPORT_NETDEV_TX_OK = NETDEV_TX_OK,       /* driver took care of packet */
+	BACKPORT_NETDEV_TX_BUSY = NETDEV_TX_BUSY,         /* driver tx path was busy*/
+	BACKPORT_NETDEV_TX_LOCKED = NETDEV_TX_LOCKED,  /* driver tx lock was already taken */
+};
+typedef enum netdev_tx netdev_tx_t;
+#endif /* __KERNEL__ */
+
+/*
+ * dev_pm_ops is only available on kernels >= 2.6.29, for
+ * older kernels we rely on reverting the work to old
+ * power management style stuff.
+ */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29))
+/*
+ * Use this if you want to use the same suspend and resume callbacks for suspend
+ * to RAM and hibernation.
+ */
+#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
+struct dev_pm_ops name = { \
+	.suspend = suspend_fn, \
+	.resume = resume_fn, \
+	.freeze = suspend_fn, \
+	.thaw = resume_fn, \
+	.poweroff = suspend_fn, \
+	.restore = resume_fn, \
+}
+#else
+#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn)
+#endif /* >= 2.6.29 */
+
+#define wireless_send_event(a, b, c, d) wireless_send_event(a, b, c, (char * ) d)
+
+/* The export symbol in changed in compat/patches/15-symbol-export-conflicts.patch */
+#define ieee80211_rx(hw, skb) mac80211_ieee80211_rx(hw, skb)
+
+#define dev_to_sdio_func(d)	container_of(d, struct sdio_func, dev)
+
+#define lockdep_assert_held(l)			do { } while (0)
+
+/*
+ * Similar to the struct tm in userspace <time.h>, but it needs to be here so
+ * that the kernel source is self contained.
+ */
+struct tm {
+	/*
+	 * the number of seconds after the minute, normally in the range
+	 * 0 to 59, but can be up to 60 to allow for leap seconds
+	 */
+	int tm_sec;
+	/* the number of minutes after the hour, in the range 0 to 59*/
+	int tm_min;
+	/* the number of hours past midnight, in the range 0 to 23 */
+	int tm_hour;
+	/* the day of the month, in the range 1 to 31 */
+	int tm_mday;
+	/* the number of months since January, in the range 0 to 11 */
+	int tm_mon;
+	/* the number of years since 1900 */
+	long tm_year;
+	/* the number of days since Sunday, in the range 0 to 6 */
+	int tm_wday;
+	/* the number of days since January 1, in the range 0 to 365 */
+	int tm_yday;
+};
+
+void time_to_tm(time_t totalsecs, int offset, struct tm *result);
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)) */
+
+#endif /* LINUX_26_32_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.33.h b/include/compat/linux/compat-2.6.33.h
new file mode 100755
index 0000000..9cefea4
--- /dev/null
+++ b/include/compat/linux/compat-2.6.33.h
@@ -0,0 +1,172 @@
+#ifndef LINUX_26_33_COMPAT_H
+#define LINUX_26_33_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33))
+
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE)
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#endif
+#include <linux/firmware.h>
+#include <linux/input.h>
+
+#if defined(CONFIG_COMPAT_FIRMWARE_CLASS)
+#define release_firmware compat_release_firmware
+#define request_firmware compat_request_firmware
+#define request_firmware_nowait compat_request_firmware_nowait
+#endif
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+int compat_request_firmware(const struct firmware **fw, const char *name,
+		     struct device *device);
+int compat_request_firmware_nowait(
+	struct module *module, int uevent,
+	const char *name, struct device *device, gfp_t gfp, void *context,
+	void (*cont)(const struct firmware *fw, void *context));
+
+void compat_release_firmware(const struct firmware *fw);
+#else
+static inline int compat_request_firmware(const struct firmware **fw,
+				   const char *name,
+				   struct device *device)
+{
+	return -EINVAL;
+}
+static inline int request_firmware_nowait(
+	struct module *module, int uevent,
+	const char *name, struct device *device, gfp_t gfp, void *context,
+	void (*cont)(const struct firmware *fw, void *context))
+{
+	return -EINVAL;
+}
+
+static inline void compat_release_firmware(const struct firmware *fw)
+{
+}
+#endif
+
+/* mask KEY_RFKILL as RHEL6 backports this */
+#if !defined(KEY_RFKILL)
+#define KEY_RFKILL		247	/* Key that controls all radios */
+#endif
+
+#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
+/* source: include/linux/if.h */
+
+/* this will never happen on older kernels */
+#define NETDEV_POST_INIT 0xffff
+
+/* mask netdev_alloc_skb_ip_align as debian squeeze also backports this */
+#define netdev_alloc_skb_ip_align(a, b) compat_netdev_alloc_skb_ip_align(a, b)
+
+static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+                unsigned int length)
+{
+	struct sk_buff *skb = netdev_alloc_skb(dev, length + NET_IP_ALIGN);
+
+	if (NET_IP_ALIGN && skb)
+		skb_reserve(skb, NET_IP_ALIGN);
+	return skb;
+}
+
+#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE)
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+
+#define pcmcia_request_window(a, b, c) pcmcia_request_window(&a, b, c)
+
+#define pcmcia_map_mem_page(a, b, c) pcmcia_map_mem_page(b, c)
+
+/* loop over CIS entries */
+int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+		      int (*loop_tuple) (struct pcmcia_device *p_dev,
+					 tuple_t *tuple,
+					 void *priv_data),
+		      void *priv_data);
+
+#endif /* CONFIG_PCMCIA */
+
+/* loop over CIS entries */
+int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
+		      cisdata_t code, cisparse_t *parse, void *priv_data,
+		      int (*loop_tuple) (tuple_t *tuple,
+					 cisparse_t *parse,
+					 void *priv_data));
+
+#endif /* CONFIG_PCCARD */
+
+/**
+ * list_for_each_entry_continue_rcu - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_rcu(pos, head, member)		\
+	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
+	     prefetch(pos->member.next), &pos->member != (head);	\
+	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
+
+#define sock_recv_ts_and_drops(msg, sk, skb) sock_recv_timestamp(msg, sk, skb)
+
+/* mask pci_pcie_cap as debian squeeze also backports this */
+#define pci_pcie_cap(a) compat_pci_pcie_cap(a)
+
+/**
+ * pci_pcie_cap - get the saved PCIe capability offset
+ * @dev: PCI device
+ *
+ * PCIe capability offset is calculated at PCI device initialization
+ * time and saved in the data structure. This function returns saved
+ * PCIe capability offset. Using this instead of pci_find_capability()
+ * reduces unnecessary search in the PCI configuration space. If you
+ * need to calculate PCIe capability offset from raw device for some
+ * reasons, please use pci_find_capability() instead.
+ */
+static inline int pci_pcie_cap(struct pci_dev *dev)
+{
+	return pci_find_capability(dev, PCI_CAP_ID_EXP);
+}
+
+/* mask pci_is_pcie as RHEL6 backports this */
+#define pci_is_pcie(a) compat_pci_is_pcie(a)
+
+/**
+ * pci_is_pcie - check if the PCI device is PCI Express capable
+ * @dev: PCI device
+ *
+ * Retrun true if the PCI device is PCI Express capable, false otherwise.
+ */
+static inline bool pci_is_pcie(struct pci_dev *dev)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+	return dev->is_pcie;
+#else
+	return !!pci_pcie_cap(dev);
+#endif
+}
+
+#ifdef __GNUC__
+#define __always_unused			__attribute__((unused))
+#else
+#define __always_unused			/* unimplemented */
+#endif
+
+/* mask IS_ERR_OR_NULL as debian squeeze also backports this */
+#define IS_ERR_OR_NULL(a) compat_IS_ERR_OR_NULL(a)
+
+static inline long __must_check IS_ERR_OR_NULL(const void *ptr)
+{
+	return !ptr || IS_ERR_VALUE((unsigned long)ptr);
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) */
+
+#endif /* LINUX_26_33_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.34.h b/include/compat/linux/compat-2.6.34.h
new file mode 100755
index 0000000..db910ac
--- /dev/null
+++ b/include/compat/linux/compat-2.6.34.h
@@ -0,0 +1,297 @@
+#ifndef LINUX_26_34_COMPAT_H
+#define LINUX_26_34_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34))
+
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#define netdev_mc_count(dev) ((dev)->mc_count)
+#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0)
+
+#define netdev_for_each_mc_addr(mclist, dev) \
+	for (mclist = dev->mc_list; mclist; mclist = mclist->next)
+/* source: include/linux/netdevice.h */
+
+
+/* Logging, debugging and troubleshooting/diagnostic helpers. */
+
+/* netdev_printk helpers, similar to dev_printk */
+
+#ifndef netdev_name
+#define netdev_name(__dev) \
+	((__dev->reg_state != NETREG_REGISTERED) ? \
+		"(unregistered net_device)" : __dev->name)
+#endif
+
+#define netdev_printk(level, netdev, format, args...)		\
+	dev_printk(level, (netdev)->dev.parent,			\
+		   "%s: " format,				\
+		   netdev_name(netdev), ##args)
+
+#define netdev_emerg(dev, format, args...)			\
+	netdev_printk(KERN_EMERG, dev, format, ##args)
+#define netdev_alert(dev, format, args...)			\
+	netdev_printk(KERN_ALERT, dev, format, ##args)
+#define netdev_crit(dev, format, args...)			\
+	netdev_printk(KERN_CRIT, dev, format, ##args)
+#define netdev_err(dev, format, args...)			\
+	netdev_printk(KERN_ERR, dev, format, ##args)
+#define netdev_warn(dev, format, args...)			\
+	netdev_printk(KERN_WARNING, dev, format, ##args)
+#define netdev_notice(dev, format, args...)			\
+	netdev_printk(KERN_NOTICE, dev, format, ##args)
+#define netdev_info(dev, format, args...)			\
+	netdev_printk(KERN_INFO, dev, format, ##args)
+
+/* mask netdev_dbg as RHEL6 backports this */
+#if !defined(netdev_dbg)
+
+#if defined(DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+	netdev_printk(KERN_DEBUG, __dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+do {								\
+	dynamic_dev_dbg((__dev)->dev.parent, "%s: " format,	\
+			netdev_name(__dev), ##args);		\
+} while (0)
+#else
+#define netdev_dbg(__dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, __dev, format, ##args); \
+	0;							\
+})
+#endif
+
+#endif
+
+/* mask netdev_vdbg as RHEL6 backports this */
+#if !defined(netdev_dbg)
+
+#if defined(VERBOSE_DEBUG)
+#define netdev_vdbg	netdev_dbg
+#else
+
+#define netdev_vdbg(dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, dev, format, ##args);	\
+	0;							\
+})
+#endif
+
+#endif
+
+/*
+ * netdev_WARN() acts like dev_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define netdev_WARN(dev, format, args...)			\
+	WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args);
+
+/* netif printk helpers, similar to netdev_printk */
+
+#define netif_printk(priv, type, level, dev, fmt, args...)	\
+do {								\
+	if (netif_msg_##type(priv))				\
+		netdev_printk(level, (dev), fmt, ##args);	\
+} while (0)
+
+#define netif_emerg(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_EMERG, dev, fmt, ##args)
+#define netif_alert(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_ALERT, dev, fmt, ##args)
+#define netif_crit(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_CRIT, dev, fmt, ##args)
+#define netif_err(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_ERR, dev, fmt, ##args)
+#define netif_warn(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_WARNING, dev, fmt, ##args)
+#define netif_notice(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_NOTICE, dev, fmt, ##args)
+#define netif_info(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_INFO, (dev), fmt, ##args)
+
+/* mask netif_dbg as RHEL6 backports this */
+#if !defined(netif_dbg)
+
+#if defined(DEBUG)
+#define netif_dbg(priv, type, dev, format, args...)		\
+	netif_printk(priv, type, KERN_DEBUG, dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netif_dbg(priv, type, netdev, format, args...)		\
+do {								\
+	if (netif_msg_##type(priv))				\
+		dynamic_dev_dbg((netdev)->dev.parent,		\
+				"%s: " format,			\
+				netdev_name(netdev), ##args);	\
+} while (0)
+#else
+#define netif_dbg(priv, type, dev, format, args...)			\
+({									\
+	if (0)								\
+		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
+	0;								\
+})
+#endif
+
+#endif
+
+/* mask netif_vdbg as RHEL6 backports this */
+#if !defined(netif_vdbg)
+
+#if defined(VERBOSE_DEBUG)
+#define netif_vdbg	netdev_dbg
+#else
+#define netif_vdbg(priv, type, dev, format, args...)		\
+({								\
+	if (0)							\
+		netif_printk(KERN_DEBUG, dev, format, ##args);	\
+	0;							\
+})
+#endif
+#endif
+/* source: include/linux/netdevice.h */
+
+
+static inline void device_lock(struct device *dev)
+{
+#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP)
+        mutex_lock(&dev->mutex);
+#else
+	down(&dev->sem);
+#endif
+}
+
+static inline int device_trylock(struct device *dev)
+{
+#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP)
+	return mutex_trylock(&dev->mutex);
+#else
+	return down_trylock(&dev->sem);
+#endif
+}
+
+static inline void device_unlock(struct device *dev)
+{
+#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP)
+        mutex_unlock(&dev->mutex);
+#else
+	up(&dev->sem);
+#endif
+}
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+#define PCMCIA_DEVICE_PROD_ID3(v3, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { NULL, NULL, (v3), NULL },  \
+	.prod_id_hash = { 0, 0, (vh3), 0 }, }
+#endif
+
+#define rcu_dereference_check(p, c) rcu_dereference(p)
+
+/**
+ *	sysfs_attr_init - initialize a dynamically allocated sysfs attribute
+ *	@attr: struct attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct attribute so we can
+ *	make lockdep happy.  This is a new requirement for attributes
+ *	and initially this is only needed when lockdep is enabled.
+ *	Lockdep gives a nice error when your attribute is added to
+ *	sysfs if you don't have this.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define sysfs_attr_init(attr)				\
+do {							\
+	static struct lock_class_key __key;		\
+							\
+	(attr)->key = &__key;				\
+} while(0)
+#else
+#define sysfs_attr_init(attr) do {} while(0)
+#endif
+
+/**
+ *	sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute
+ *	@attr: struct bin_attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct bin_attribute so we
+ *	can make lockdep happy.  This is a new requirement for
+ *	attributes and initially this is only needed when lockdep is
+ *	enabled.  Lockdep gives a nice error when your attribute is
+ *	added to sysfs if you don't have this.
+ */
+#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
+
+#define usb_alloc_coherent(dev, size, mem_flags, dma) usb_buffer_alloc(dev, size, mem_flags, dma)
+#define usb_free_coherent(dev, size, addr, dma) usb_buffer_free(dev, size, addr, dma)
+
+/* only include this if DEFINE_DMA_UNMAP_ADDR is not set as debian squeeze also backports this  */
+#ifndef DEFINE_DMA_UNMAP_ADDR
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
+#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
+#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
+#else
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
+#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
+#define dma_unmap_len(PTR, LEN_NAME)             (0)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
+#endif
+#endif
+
+/* mask dma_set_coherent_mask as debian squeeze also backports this */
+#define dma_set_coherent_mask(a, b) compat_dma_set_coherent_mask(a, b)
+
+static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (!dma_supported(dev, mask))
+		return -EIO;
+	dev->coherent_dma_mask = mask;
+	return 0;
+}
+
+/* USB autosuspend and autoresume */
+static inline int usb_enable_autosuspend(struct usb_device *udev)
+{ return 0; }
+static inline int usb_disable_autosuspend(struct usb_device *udev)
+{ return 0; }
+
+#define MMC_PM_KEEP_POWER	(1 << 0)	/* preserve card power during suspend */
+#define sdio_set_host_pm_flags(a, b) 0
+
+#define rcu_dereference_protected(p, c) (p)
+#define rcu_access_pointer(p)   ACCESS_ONCE(p)
+
+#define rcu_dereference_raw(p)	rcu_dereference(p)
+
+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+static inline int rcu_read_lock_held(void)
+{
+	return 1;
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)) */
+
+#endif /* LINUX_26_34_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.35.h b/include/compat/linux/compat-2.6.35.h
new file mode 100755
index 0000000..5e43002
--- /dev/null
+++ b/include/compat/linux/compat-2.6.35.h
@@ -0,0 +1,48 @@
+#ifndef LINUX_26_35_COMPAT_H
+#define LINUX_26_35_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35))
+#include <linux/etherdevice.h>
+#include <net/sock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+
+/* added on linux/kernel.h */
+#define USHRT_MAX      ((u16)(~0U))
+#define SHRT_MAX       ((s16)(USHRT_MAX>>1))
+#define SHRT_MIN       ((s16)(-SHRT_MAX - 1))
+
+#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
+#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
+
+#define netdev_hw_addr dev_mc_list
+
+static inline wait_queue_head_t *sk_sleep(struct sock *sk)
+{
+	return sk->sk_sleep;
+}
+
+#define sdio_writeb_readb(func, write_byte, addr, err_ret) sdio_readb(func, addr, err_ret)
+
+/* mask hex_to_bin as RHEL6 backports this */
+#define hex_to_bin(a) compat_hex_to_bin(a)
+
+int hex_to_bin(char ch);
+
+extern loff_t noop_llseek(struct file *file, loff_t offset, int origin);
+
+#define pm_qos_request(_qos) pm_qos_requirement(_qos)
+
+static inline struct usb_host_endpoint *
+usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe)
+{
+	struct usb_host_endpoint **eps;
+	eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out;
+	return eps[usb_pipeendpoint(pipe)];
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) */
+
+#endif /* LINUX_26_35_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.36.h b/include/compat/linux/compat-2.6.36.h
new file mode 100755
index 0000000..314fb35
--- /dev/null
+++ b/include/compat/linux/compat-2.6.36.h
@@ -0,0 +1,172 @@
+#ifndef LINUX_26_36_COMPAT_H
+#define LINUX_26_36_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36))
+
+#include <linux/usb.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/pm_qos_params.h>
+#include <linux/smp_lock.h>
+
+#define kparam_block_sysfs_write(a)
+#define kparam_unblock_sysfs_write(a)
+
+/* mask va_format as RHEL6 backports this */
+#define va_format compat_va_format
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+#define device_rename(dev, new_name) device_rename(dev, (char *)new_name)
+
+#ifdef CONFIG_COMPAT_USB_URB_THREAD_FIX
+#define usb_scuttle_anchored_urbs(anchor)	compat_usb_scuttle_anchored_urbs(anchor)
+#define usb_get_from_anchor(anchor)	compat_usb_get_from_anchor(anchor)
+#define usb_unlink_anchored_urbs(anchor)	compat_usb_unlink_anchored_urbs(anchor)
+
+extern void compat_usb_unlink_anchored_urbs(struct usb_anchor *anchor);
+extern struct urb *compat_usb_get_from_anchor(struct usb_anchor *anchor);
+extern void compat_usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
+#endif
+
+/**
+ * pcmcia_read_config_byte() - read a byte from a card configuration register
+ *
+ * pcmcia_read_config_byte() reads a byte from a configuration register in
+ * attribute memory.
+ */
+static inline int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val)
+{
+        int ret;
+        conf_reg_t reg = { 0, CS_READ, where, 0 };
+        ret = pcmcia_access_configuration_register(p_dev, &reg);
+        *val = reg.Value;
+        return ret;
+}
+
+/**
+ * pcmcia_write_config_byte() - write a byte to a card configuration register
+ *
+ * pcmcia_write_config_byte() writes a byte to a configuration register in
+ * attribute memory.
+ */
+static inline int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val)
+{
+	conf_reg_t reg = { 0, CS_WRITE, where, val };
+	return pcmcia_access_configuration_register(p_dev, &reg);
+}
+
+struct pm_qos_request_list {
+	u32 qos;
+	void *request;
+};
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35))
+
+#define pm_qos_add_request(_req, _class, _value) do {			\
+	(_req)->request = #_req;					\
+	(_req)->qos = _class;						\
+	pm_qos_add_requirement((_class), (_req)->request, (_value));	\
+    } while(0)
+
+#define pm_qos_update_request(_req, _value)				\
+	pm_qos_update_requirement((_req)->qos, (_req)->request, (_value))
+
+#define pm_qos_remove_request(_req)					\
+	pm_qos_remove_requirement((_req)->qos, (_req)->request)
+
+#else
+
+#define pm_qos_add_request(_req, _class, _value) do {			\
+	(_req)->request = pm_qos_add_request((_class), (_value));	\
+    } while (0)
+
+#define pm_qos_update_request(_req, _value)				\
+	pm_qos_update_request((_req)->request, (_value))
+
+#define pm_qos_remove_request(_req)					\
+	pm_qos_remove_request((_req)->request)
+
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+#ifndef alloc_workqueue
+#define alloc_workqueue(name, flags, max_active) __create_workqueue(name, flags, max_active, 0)
+#endif
+
+#define EXTPROC	0200000
+#define TIOCPKT_IOCTL		64
+
+static inline void tty_lock(void) __acquires(kernel_lock)
+{
+#ifdef CONFIG_LOCK_KERNEL
+	/* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */
+	WARN_ON(kernel_locked());
+#endif
+	lock_kernel();
+}
+static inline void tty_unlock(void) __releases(kernel_lock)
+{
+	unlock_kernel();
+}
+#define tty_locked()           (kernel_locked())
+
+#define usleep_range(_min, _max)	msleep((_max) / 1000)
+
+#define __rcu
+
+static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {}
+
+static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
+{
+	return false;
+}
+
+static inline void skb_tx_timestamp(struct sk_buff *skb)
+{
+}
+
+extern struct workqueue_struct *system_nrt_wq;
+
+void compat_system_workqueue_create(void);
+void compat_system_workqueue_destroy(void);
+
+#define br_port_exists(dev)	(dev->br_port)
+
+#else
+
+static inline void compat_system_workqueue_create(void)
+{
+}
+
+static inline void compat_system_workqueue_destroy(void)
+{
+}
+
+/*
+ * This is not part of The 2.6.37 kernel yet but we
+ * we use it to optimize the backport code we
+ * need to implement. Instead of using ifdefs
+ * to check what version of the check we use
+ * we just replace all checks on current code
+ * with this. I'll submit this upstream too, that
+ * way all we'd have to do is to implement this
+ * for older kernels, then we would not have to
+ * edit the upstrema code for backport efforts.
+ */
+#define br_port_exists(dev)	(dev->priv_flags & IFF_BRIDGE_PORT)
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)) */
+
+#endif /* LINUX_26_36_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.37.h b/include/compat/linux/compat-2.6.37.h
new file mode 100755
index 0000000..c19e781
--- /dev/null
+++ b/include/compat/linux/compat-2.6.37.h
@@ -0,0 +1,140 @@
+#ifndef LINUX_26_37_COMPAT_H
+#define LINUX_26_37_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37))
+
+#include <linux/skbuff.h>
+#include <linux/leds.h>
+
+#define SDIO_CLASS_BT_AMP	0x09	/* Type-A Bluetooth AMP interface */
+
+extern struct kobj_ns_type_operations net_ns_type_operations;
+
+/* mask skb_checksum_none_assert as RHEL6 backports this */
+#define skb_checksum_none_assert(a) compat_skb_checksum_none_assert(a)
+
+/**
+ * skb_checksum_none_assert - make sure skb ip_summed is CHECKSUM_NONE
+ * @skb: skb to check
+ *
+ * fresh skbs have their ip_summed set to CHECKSUM_NONE.
+ * Instead of forcing ip_summed to CHECKSUM_NONE, we can
+ * use this helper, to document places where we make this assertion.
+ */
+static inline void skb_checksum_none_assert(struct sk_buff *skb)
+{
+#ifdef DEBUG
+	BUG_ON(skb->ip_summed != CHECKSUM_NONE);
+#endif
+}
+
+#define pcmcia_enable_device(link)	pcmcia_request_configuration(link, &link->conf)
+
+#include <net/genetlink.h>
+
+struct compat_genl_info {
+	struct genl_info *info;
+
+	u32 snd_seq;
+	u32 snd_pid;
+	struct genlmsghdr *genlhdr;
+	struct nlattr **attrs;
+	void *user_ptr[2];
+};
+#define genl_info compat_genl_info
+
+struct compat_genl_ops {
+	struct genl_ops ops;
+
+	u8 cmd;
+	u8 internal_flags;
+	unsigned int flags;
+	const struct nla_policy *policy;
+
+	int (*doit)(struct sk_buff *skb, struct genl_info *info);
+	int (*dumpit)(struct sk_buff *skb, struct netlink_callback *cb);
+	int (*done)(struct netlink_callback *cb);
+};
+#define genl_ops compat_genl_ops
+
+struct compat_genl_family {
+	struct genl_family family;
+
+	struct list_head list;
+
+	unsigned int id, hdrsize, version, maxattr;
+	const char *name;
+	bool netnsok;
+
+	struct nlattr **attrbuf;
+
+	int (*pre_doit)(struct genl_ops *ops, struct sk_buff *skb,
+			struct genl_info *info);
+
+	void (*post_doit)(struct genl_ops *ops, struct sk_buff *skb,
+			  struct genl_info *info);
+};
+
+#define genl_family compat_genl_family
+
+#define genl_register_family_with_ops compat_genl_register_family_with_ops
+
+int genl_register_family_with_ops(struct genl_family *family,
+				  struct genl_ops *ops, size_t n_ops);
+
+#define genl_unregister_family compat_genl_unregister_family
+
+int genl_unregister_family(struct genl_family *family);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32))
+#define genl_info_net(_info) genl_info_net((_info)->info)
+#endif
+
+#define genlmsg_reply(_msg, _info) genlmsg_reply(_msg, (_info)->info)
+#define genlmsg_put(_skb, _pid, _seq, _fam, _flags, _cmd) genlmsg_put(_skb, _pid, _seq, &(_fam)->family, _flags, _cmd)
+#define genl_register_mc_group(_fam, _grp) genl_register_mc_group(&(_fam)->family, _grp)
+#define genl_unregister_mc_group(_fam, _grp) genl_unregister_mc_group(&(_fam)->family, _grp)
+
+
+extern void led_blink_set(struct led_classdev *led_cdev,
+			  unsigned long *delay_on,
+			  unsigned long *delay_off);
+
+#define led_classdev_unregister compat_led_classdev_unregister
+extern void compat_led_classdev_unregister(struct led_classdev *led_cdev);
+
+#define led_brightness_set compat_led_brightness_set
+extern void compat_led_brightness_set(struct led_classdev *led_cdev,
+				      enum led_brightness brightness);
+
+#define alloc_ordered_workqueue(name, flags) create_singlethread_workqueue(name)
+
+#define netdev_refcnt_read(a) atomic_read(&a->refcnt)
+
+/* mask vzalloc as RHEL6 backports this */
+#define vzalloc(a) compat_vzalloc(a)
+
+extern void *vzalloc(unsigned long size);
+
+#define rtnl_dereference(p)                                     \
+        rcu_dereference_protected(p, lockdep_rtnl_is_held())
+
+/**
+ * RCU_INIT_POINTER() - initialize an RCU protected pointer
+ *
+ * Initialize an RCU-protected pointer in such a way to avoid RCU-lockdep
+ * splats.
+ */
+#define RCU_INIT_POINTER(p, v) \
+		p = (typeof(*v) __force __rcu *)(v)
+
+static inline bool skb_has_frag_list(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->frag_list != NULL;
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) */
+
+#endif /* LINUX_26_37_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.38.h b/include/compat/linux/compat-2.6.38.h
new file mode 100755
index 0000000..49460e6
--- /dev/null
+++ b/include/compat/linux/compat-2.6.38.h
@@ -0,0 +1,95 @@
+#ifndef LINUX_26_38_COMPAT_H
+#define LINUX_26_38_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38))
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+
+/* rename member in struct mmc_host in include/linux/mmc/host.h */
+#define max_segs	max_hw_segs
+
+
+/* Exponentially weighted moving average (EWMA) */
+
+/* For more documentation see lib/average.c */
+
+struct ewma {
+	unsigned long internal;
+	unsigned long factor;
+	unsigned long weight;
+};
+
+extern void ewma_init(struct ewma *avg, unsigned long factor,
+		      unsigned long weight);
+
+extern struct ewma *ewma_add(struct ewma *avg, unsigned long val);
+
+/**
+ * ewma_read() - Get average value
+ * @avg: Average structure
+ *
+ * Returns the average value held in @avg.
+ */
+static inline unsigned long ewma_read(const struct ewma *avg)
+{
+	return DIV_ROUND_CLOSEST(avg->internal, avg->factor);
+}
+
+#define pr_warn pr_warning
+#define create_freezable_workqueue create_freezeable_workqueue
+
+static inline int skb_checksum_start_offset(const struct sk_buff *skb)
+{
+	return skb->csum_start - skb_headroom(skb);
+}
+
+/* from include/linux/printk.h */
+#define pr_emerg_once(fmt, ...)					\
+	printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_once(fmt, ...)					\
+	printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_once(fmt, ...)					\
+	printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_once(fmt, ...)					\
+	printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_once(fmt, ...)					\
+	printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_once(fmt, ...)				\
+	printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_once(fmt, ...)					\
+	printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont_once(fmt, ...)					\
+	printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
+#if defined(DEBUG)
+#define pr_debug_once(fmt, ...)					\
+	printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_once(fmt, ...)					\
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/* include/linux/netdevice.h */
+#define alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) \
+	alloc_netdev_mq(sizeof_priv, name, setup, \
+			max_t(unsigned int, txqs, rxqs))
+
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
+
+/**
+ * is_unicast_ether_addr - Determine if the Ethernet address is unicast
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a unicast address.
+ */
+static inline int is_unicast_ether_addr(const u8 *addr)
+{
+	return !is_multicast_ether_addr(addr);
+}
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)) */
+
+#endif /* LINUX_26_38_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.39.h b/include/compat/linux/compat-2.6.39.h
new file mode 100755
index 0000000..254ad57
--- /dev/null
+++ b/include/compat/linux/compat-2.6.39.h
@@ -0,0 +1,169 @@
+#ifndef LINUX_26_39_COMPAT_H
+#define LINUX_26_39_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39))
+
+#include <linux/tty.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+
+#define tiocmget(tty) tiocmget(tty, NULL)
+#define tiocmset(tty, set, clear) tiocmset(tty, NULL, set, clear)
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27))
+extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) */
+
+static inline int irq_set_irq_wake(unsigned int irq, unsigned int on)
+{
+	return set_irq_wake(irq, on);
+}
+static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip)
+{
+	return set_irq_chip(irq, chip);
+}
+static inline int irq_set_handler_data(unsigned int irq, void *data)
+{
+	return set_irq_data(irq, data);
+}
+static inline int irq_set_chip_data(unsigned int irq, void *data)
+{
+	return set_irq_chip_data(irq, data);
+}
+static inline int irq_set_irq_type(unsigned int irq, unsigned int type)
+{
+	return set_irq_type(irq, type);
+}
+static inline int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
+{
+	return set_irq_msi(irq, entry);
+}
+static inline struct irq_chip *irq_get_chip(unsigned int irq)
+{
+	return get_irq_chip(irq);
+}
+static inline void *irq_get_chip_data(unsigned int irq)
+{
+	return get_irq_chip_data(irq);
+}
+static inline void *irq_get_handler_data(unsigned int irq)
+{
+	return get_irq_data(irq);
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
+static inline void *irq_data_get_irq_handler_data(struct irq_data *d)
+{
+	return irq_data_get_irq_data(d);
+}
+#endif
+
+static inline struct msi_desc *irq_get_msi_desc(unsigned int irq)
+{
+	return get_irq_msi(irq);
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25))
+static inline void irq_set_noprobe(unsigned int irq)
+{
+	set_irq_noprobe(irq);
+}
+static inline void irq_set_probe(unsigned int irq)
+{
+	set_irq_probe(irq);
+}
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29))
+static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc)
+{
+	return get_irq_desc_chip(desc);
+}
+static inline void *irq_desc_get_handler_data(struct irq_desc *desc)
+{
+	return get_irq_desc_data(desc);
+}
+
+static inline void *irq_desc_get_chip_data(struct irq_desc *desc)
+{
+	return get_irq_desc_chip_data(desc);
+}
+
+static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc)
+{
+	return get_irq_desc_msi(desc);
+}
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) */
+
+/*
+ * kstrto* was included in kernel 2.6.38.4 and causes conflicts with the
+ * version included in compat-wireless. We use strict_strtol to check if
+ * kstrto* is already available.
+ */
+#ifndef strict_strtol
+/* Internal, do not use. */
+int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res);
+int __must_check _kstrtol(const char *s, unsigned int base, long *res);
+
+int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res);
+int __must_check kstrtoll(const char *s, unsigned int base, long long *res);
+static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res)
+{
+	/*
+	 * We want to shortcut function call, but
+	 * __builtin_types_compatible_p(unsigned long, unsigned long long) = 0.
+	 */
+	if (sizeof(unsigned long) == sizeof(unsigned long long) &&
+	    __alignof__(unsigned long) == __alignof__(unsigned long long))
+		return kstrtoull(s, base, (unsigned long long *)res);
+	else
+		return _kstrtoul(s, base, res);
+}
+
+static inline int __must_check kstrtol(const char *s, unsigned int base, long *res)
+{
+	/*
+	 * We want to shortcut function call, but
+	 * __builtin_types_compatible_p(long, long long) = 0.
+	 */
+	if (sizeof(long) == sizeof(long long) &&
+	    __alignof__(long) == __alignof__(long long))
+		return kstrtoll(s, base, (long long *)res);
+	else
+		return _kstrtol(s, base, res);
+}
+
+int __must_check kstrtouint(const char *s, unsigned int base, unsigned int *res);
+int __must_check kstrtoint(const char *s, unsigned int base, int *res);
+
+static inline int __must_check kstrtou64(const char *s, unsigned int base, u64 *res)
+{
+	return kstrtoull(s, base, res);
+}
+
+static inline int __must_check kstrtos64(const char *s, unsigned int base, s64 *res)
+{
+	return kstrtoll(s, base, res);
+}
+
+static inline int __must_check kstrtou32(const char *s, unsigned int base, u32 *res)
+{
+	return kstrtouint(s, base, res);
+}
+
+static inline int __must_check kstrtos32(const char *s, unsigned int base, s32 *res)
+{
+	return kstrtoint(s, base, res);
+}
+
+int __must_check kstrtou16(const char *s, unsigned int base, u16 *res);
+int __must_check kstrtos16(const char *s, unsigned int base, s16 *res);
+int __must_check kstrtou8(const char *s, unsigned int base, u8 *res);
+int __must_check kstrtos8(const char *s, unsigned int base, s8 *res);
+#endif /* ifndef strict_strtol */
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39)) */
+
+#endif /* LINUX_26_39_COMPAT_H */
diff --git a/include/compat/linux/compat-2.6.h b/include/compat/linux/compat-2.6.h
new file mode 100755
index 0000000..121d88f
--- /dev/null
+++ b/include/compat/linux/compat-2.6.h
@@ -0,0 +1,42 @@
+#ifndef LINUX_26_COMPAT_H
+#define LINUX_26_COMPAT_H
+
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 1, 0))
+#include <linux/kconfig.h>
+#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 33))
+#include <generated/autoconf.h>
+#else
+#include <linux/autoconf.h>
+#endif
+#include <linux/compat_autoconf.h>
+
+/*
+ * Each compat file represents compatibility code for new kernel
+ * code introduced for *that* kernel revision.
+ */
+
+#include <linux/compat-2.6.22.h>
+#include <linux/compat-2.6.23.h>
+#include <linux/compat-2.6.24.h>
+#include <linux/compat-2.6.25.h>
+#include <linux/compat-2.6.26.h>
+#include <linux/compat-2.6.27.h>
+#include <linux/compat-2.6.28.h>
+#include <linux/compat-2.6.29.h>
+#include <linux/compat-2.6.30.h>
+#include <linux/compat-2.6.31.h>
+#include <linux/compat-2.6.32.h>
+#include <linux/compat-2.6.33.h>
+#include <linux/compat-2.6.34.h>
+#include <linux/compat-2.6.35.h>
+#include <linux/compat-2.6.36.h>
+#include <linux/compat-2.6.37.h>
+#include <linux/compat-2.6.38.h>
+#include <linux/compat-2.6.39.h>
+#include <linux/compat-3.0.h>
+#include <linux/compat-3.1.h>
+#include <linux/compat-3.2.h>
+#include <linux/compat-3.3.h>
+
+#endif /* LINUX_26_COMPAT_H */
diff --git a/include/compat/linux/compat-3.0.h b/include/compat/linux/compat-3.0.h
new file mode 100755
index 0000000..c5cd58d
--- /dev/null
+++ b/include/compat/linux/compat-3.0.h
@@ -0,0 +1,130 @@
+#ifndef LINUX_3_0_COMPAT_H
+#define LINUX_3_0_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0))
+
+#include <linux/rcupdate.h>
+
+/*
+ * since commit 1c5cae815d19ffe02bdfda1260949ef2b1806171
+ * "net: call dev_alloc_name from register_netdevice" dev_alloc_name is
+ * called automatically. This is not implemented in older kernel
+ * versions so it will result in device wrong names.
+ */
+static inline int register_netdevice_name(struct net_device *dev)
+{
+	int err;
+
+	if (strchr(dev->name, '%')) {
+		err = dev_alloc_name(dev, dev->name);
+		if (err < 0)
+			return err;
+	}
+
+	return register_netdevice(dev);
+}
+
+#define register_netdevice(dev) register_netdevice_name(dev)
+
+/* BCMA core, see drivers/bcma/ */
+#ifndef BCMA_CORE
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+	__u16	manuf;
+	__u16	id;
+	__u8	rev;
+	__u8	class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class)  \
+	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END  \
+	{ 0, },
+
+#define BCMA_ANY_MANUF		0xFFFF
+#define BCMA_ANY_ID		0xFFFF
+#define BCMA_ANY_REV		0xFF
+#define BCMA_ANY_CLASS		0xFF
+#endif /* BCMA_CORE */
+
+int mac_pton(const char *s, u8 *mac);
+
+int __must_check kstrtoull_from_user(const char __user *s, size_t count, unsigned int base, unsigned long long *res);
+int __must_check kstrtoll_from_user(const char __user *s, size_t count, unsigned int base, long long *res);
+int __must_check kstrtoul_from_user(const char __user *s, size_t count, unsigned int base, unsigned long *res);
+int __must_check kstrtol_from_user(const char __user *s, size_t count, unsigned int base, long *res);
+int __must_check kstrtouint_from_user(const char __user *s, size_t count, unsigned int base, unsigned int *res);
+int __must_check kstrtoint_from_user(const char __user *s, size_t count, unsigned int base, int *res);
+int __must_check kstrtou16_from_user(const char __user *s, size_t count, unsigned int base, u16 *res);
+int __must_check kstrtos16_from_user(const char __user *s, size_t count, unsigned int base, s16 *res);
+int __must_check kstrtou8_from_user(const char __user *s, size_t count, unsigned int base, u8 *res);
+int __must_check kstrtos8_from_user(const char __user *s, size_t count, unsigned int base, s8 *res);
+
+static inline int __must_check kstrtou64_from_user(const char __user *s, size_t count, unsigned int base, u64 *res)
+{
+	return kstrtoull_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtos64_from_user(const char __user *s, size_t count, unsigned int base, s64 *res)
+{
+	return kstrtoll_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtou32_from_user(const char __user *s, size_t count, unsigned int base, u32 *res)
+{
+	return kstrtouint_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtos32_from_user(const char __user *s, size_t count, unsigned int base, s32 *res)
+{
+	return kstrtoint_from_user(s, count, base, res);
+}
+
+/*
+ * This adds a nested function everywhere kfree_rcu() was called. This
+ * function frees the memory and is given as a function to call_rcu().
+ * The rcu callback could happen every time also after the module was
+ *  unloaded and this will cause problems.
+ */
+#define kfree_rcu(data, rcuhead)		do {			\
+		void __kfree_rcu_fn(struct rcu_head *rcu_head)		\
+		{							\
+			void *___ptr;					\
+			___ptr = container_of(rcu_head, typeof(*(data)), rcuhead);\
+			kfree(___ptr);					\
+		}							\
+		call_rcu(&(data)->rcuhead, __kfree_rcu_fn);		\
+	} while (0)
+
+#ifdef MODULE
+
+/*
+ * The define overwriting module_exit is based on the original module_exit
+ * which looks like this:
+ * #define module_exit(exitfn)                                    \
+ *         static inline exitcall_t __exittest(void)               \
+ *         { return exitfn; }                                      \
+ *         void cleanup_module(void) __attribute__((alias(#exitfn)));
+ *
+ * We replaced the call to the actual function exitfn() with a call to our
+ * function which calls the original exitfn() and then rcu_barrier()
+ *
+ * As a module will not be unloaded that ofter it should not have a big
+ * performance impact when rcu_barrier() is called on every module exit,
+ * also when no kfree_rcu() backport is used in that module.
+ */
+#undef module_exit
+#define module_exit(exitfn)						\
+	static void __exit __exit_compat(void)				\
+	{								\
+		exitfn();						\
+		rcu_barrier();						\
+	}								\
+	void cleanup_module(void) __attribute__((alias("__exit_compat")));
+
+#endif
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)) */
+
+#endif /* LINUX_3_0_COMPAT_H */
diff --git a/include/compat/linux/compat-3.1.h b/include/compat/linux/compat-3.1.h
new file mode 100755
index 0000000..5b00ac9
--- /dev/null
+++ b/include/compat/linux/compat-3.1.h
@@ -0,0 +1,49 @@
+#ifndef LINUX_3_1_COMPAT_H
+#define LINUX_3_1_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0))
+
+#include <linux/security.h>
+
+#define genl_dump_check_consistent(cb, user_hdr, family)
+
+#define IFF_TX_SKB_SHARING	0x10000	/* The interface supports sharing
+					 * skbs on transmit */
+
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID3(manf, card, v3, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.prod_id = { NULL, NULL, (v3), NULL }, \
+	.prod_id_hash = { 0, 0, (vh3), 0 }, }
+
+/*
+ * This has been defined in include/linux/security.h for some time, but was
+ * only given an EXPORT_SYMBOL for 3.1.  Add a compat_* definition to avoid
+ * breaking the compile.
+ */
+#define security_sk_clone(a, b) compat_security_sk_clone(a, b)
+
+static inline void security_sk_clone(const struct sock *sk, struct sock *newsk)
+{
+}
+
+/*
+ * In many versions, several architectures do not seem to include an
+ * atomic64_t implementation, and do not include the software emulation from
+ * asm-generic/atomic64_t.
+ * Detect and handle this here.
+ */
+#include <asm/atomic.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) && !defined(ATOMIC64_INIT) && !defined(CONFIG_X86) && !((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)) && defined(CONFIG_ARM) && !defined(CONFIG_GENERIC_ATOMIC64))
+#include <asm-generic/atomic64.h>
+#endif
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0)) */
+
+#endif /* LINUX_3_1_COMPAT_H */
diff --git a/include/compat/linux/compat-3.2.h b/include/compat/linux/compat-3.2.h
new file mode 100755
index 0000000..cb14f0b
--- /dev/null
+++ b/include/compat/linux/compat-3.2.h
@@ -0,0 +1,81 @@
+#ifndef LINUX_3_2_COMPAT_H
+#define LINUX_3_2_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0))
+
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+
+#define PMSG_IS_AUTO(msg)	(((msg).event & PM_EVENT_AUTO) != 0)
+
+/**
+ * skb_frag_page - retrieve the page refered to by a paged fragment
+ * @frag: the paged fragment
+ *
+ * Returns the &struct page associated with @frag.
+ */
+static inline struct page *skb_frag_page(const skb_frag_t *frag)
+{
+	return frag->page;
+}
+
+/**
+ * skb_frag_dma_map - maps a paged fragment via the DMA API
+ * @device: the device to map the fragment to
+ * @frag: the paged fragment to map
+ * @offset: the offset within the fragment (starting at the
+ *          fragment's own offset)
+ * @size: the number of bytes to map
+ * @direction: the direction of the mapping (%PCI_DMA_*)
+ *
+ * Maps the page associated with @frag to @device.
+ */
+static inline dma_addr_t skb_frag_dma_map(struct device *dev,
+					  const skb_frag_t *frag,
+					  size_t offset, size_t size,
+					  enum dma_data_direction dir)
+{
+	return dma_map_page(dev, skb_frag_page(frag),
+			    frag->page_offset + offset, size, dir);
+}
+
+#define ETH_P_TDLS	0x890D          /* TDLS */
+
+static inline unsigned int skb_frag_size(const skb_frag_t *frag)
+{
+	return frag->size;
+}
+
+static inline char *hex_byte_pack(char *buf, u8 byte)
+{
+	*buf++ = hex_asc_hi(byte);
+	*buf++ = hex_asc_lo(byte);
+	return buf;
+}
+
+/* module_platform_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit.  This eliminates a lot of
+ * boilerplate.  Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_platform_driver(__platform_driver) \
+        module_driver(__platform_driver, platform_driver_register, \
+                        platform_driver_unregister)
+
+static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_handle, gfp_t flag)
+{
+	void *ret = dma_alloc_coherent(dev, size, dma_handle, flag);
+	if (ret)
+		memset(ret, 0, size);
+	return ret;
+}
+
+extern int __netdev_printk(const char *level, const struct net_device *dev,
+			   struct va_format *vaf);
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)) */
+
+#endif /* LINUX_3_2_COMPAT_H */
diff --git a/include/compat/linux/compat-3.3.h b/include/compat/linux/compat-3.3.h
new file mode 100755
index 0000000..4965f23
--- /dev/null
+++ b/include/compat/linux/compat-3.3.h
@@ -0,0 +1,56 @@
+#ifndef LINUX_3_3_COMPAT_H
+#define LINUX_3_3_COMPAT_H
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+
+/* include to override NL80211_FEATURE_SK_TX_STATUS */
+#include <linux/nl80211.h>
+
+static inline void skb_complete_wifi_ack(struct sk_buff *skb, bool acked)
+{
+	WARN_ON(1);
+}
+#define NL80211_FEATURE_SK_TX_STATUS 0
+
+typedef u32 netdev_features_t;
+
+/* source include/linux/device.h */
+/**
+ * module_driver() - Helper macro for drivers that don't do anything
+ * special in module init/exit. This eliminates a lot of boilerplate.
+ * Each module may only use this macro once, and calling it replaces
+ * module_init() and module_exit().
+ *
+ * Use this macro to construct bus specific macros for registering
+ * drivers, and do not use it on its own.
+ */
+#define module_driver(__driver, __register, __unregister) \
+static int __init __driver##_init(void) \
+{ \
+	return __register(&(__driver)); \
+} \
+module_init(__driver##_init); \
+static void __exit __driver##_exit(void) \
+{ \
+	__unregister(&(__driver)); \
+} \
+module_exit(__driver##_exit);
+
+/* source include/linux/usb.h */
+/**
+ * module_usb_driver() - Helper macro for registering a USB driver
+ * @__usb_driver: usb_driver struct
+ *
+ * Helper macro for USB drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_usb_driver(__usb_driver) \
+	module_driver(__usb_driver, usb_register, \
+		       usb_deregister)
+
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
+
+#endif /* LINUX_3_3_COMPAT_H */
diff --git a/include/compat/linux/compat_autoconf.h b/include/compat/linux/compat_autoconf.h
new file mode 100755
index 0000000..eb10f02
--- /dev/null
+++ b/include/compat/linux/compat_autoconf.h
@@ -0,0 +1,38 @@
+#ifndef COMPAT_AUTOCONF_INCLUDED
+#define COMPAT_AUTOCONF_INCLUDED
+
+/*
+ * This is an example of a compat autconf header file that gets
+ * automatically generated by your projet. You will only need this
+ * if you are working with a lot of config options.
+ *
+ * Your project will likely just override this, or leave this as-is.
+ */
+
+/*
+ * Example automatically generated C config: don't edit
+ * Thu Dec 10 10:34:11 PST 2009
+ * compat-wireless-2.6: master-2009-11-19-5-gb4fd4dd
+ * linux-2.6: next-20091208
+ */
+/* #define COMPAT_PROJECT_FOO_RELEASE "master-2009-11-19-5-gb4fd4dd"
+#define COMPAT_UPSTREAM_FOO_KERNEL_RELEASE "next-20091208" */
+
+/* Example kernel version minimum requirement */
+/* #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10))
+#error Compat-wireless requirement: Linux >= 2,6,10
+#endif */ /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) */
+
+/* Example hard requirement */
+/* #error Compat-wireless requirement:
+CONFIG_WIRELESS_EXT must be enabled in your kernel
+#endif */ /* CONFIG_WIRELESS_EXT */
+
+/*
+ * Example of how to match your external modules kconfig options into this.
+ * You'll need something to generate this for you.
+ */
+/* #ifndef CONFIG_FOO_BAR
+#define CONFIG_FOO_BAR 1 */
+
+#endif /* COMPAT_AUTOCONF_INCLUDED */
diff --git a/include/compat/linux/cordic.h b/include/compat/linux/cordic.h
new file mode 100755
index 0000000..f932093
--- /dev/null
+++ b/include/compat/linux/cordic.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __CORDIC_H_
+#define __CORDIC_H_
+
+#include <linux/types.h>
+
+/**
+ * struct cordic_iq - i/q coordinate.
+ *
+ * @i: real part of coordinate (in phase).
+ * @q: imaginary part of coordinate (quadrature).
+ */
+struct cordic_iq {
+	s32 i;
+	s32 q;
+};
+
+/**
+ * cordic_calc_iq() - calculates the i/q coordinate for given angle.
+ *
+ * @theta: angle in degrees for which i/q coordinate is to be calculated.
+ * @coord: function output parameter holding the i/q coordinate.
+ *
+ * The function calculates the i/q coordinate for a given angle using
+ * cordic algorithm. The coordinate consists of a real (i) and an
+ * imaginary (q) part. The real part is essentially the cosine of the
+ * angle and the imaginary part is the sine of the angle. The returned
+ * values are scaled by 2^16 for precision. The range for theta is
+ * for -180 degrees to +180 degrees. Passed values outside this range are
+ * converted before doing the actual calculation.
+ */
+struct cordic_iq cordic_calc_iq(s32 theta);
+
+#endif /* __CORDIC_H_ */
diff --git a/include/compat/linux/crc8.h b/include/compat/linux/crc8.h
new file mode 100755
index 0000000..13c8dab
--- /dev/null
+++ b/include/compat/linux/crc8.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __CRC8_H_
+#define __CRC8_H_
+
+#include <linux/types.h>
+
+/* see usage of this value in crc8() description */
+#define CRC8_INIT_VALUE		0xFF
+
+/*
+ * Return value of crc8() indicating valid message+crc. This is true
+ * if a CRC is inverted before transmission. The CRC computed over the
+ * whole received bitstream is _table[x], where x is the bit pattern
+ * of the modification (almost always 0xff).
+ */
+#define CRC8_GOOD_VALUE(_table)	(_table[0xFF])
+
+/* required table size for crc8 algorithm */
+#define CRC8_TABLE_SIZE			256
+
+/* helper macro assuring right table size is used */
+#define DECLARE_CRC8_TABLE(_table) \
+	static u8 _table[CRC8_TABLE_SIZE]
+
+/**
+ * crc8_populate_lsb - fill crc table for given polynomial in regular bit order.
+ *
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
+ *
+ * This function fills the provided table according the polynomial provided for
+ * regular bit order (lsb first). Polynomials in CRC algorithms are typically
+ * represented as shown below.
+ *
+ *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
+ *
+ * For lsb first direction x^7 maps to the lsb. So the polynomial is as below.
+ *
+ * - lsb first: poly = 10101011(1) = 0xAB
+ */
+void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
+
+/**
+ * crc8_populate_msb - fill crc table for given polynomial in reverse bit order.
+ *
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
+ *
+ * This function fills the provided table according the polynomial provided for
+ * reverse bit order (msb first). Polynomials in CRC algorithms are typically
+ * represented as shown below.
+ *
+ *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
+ *
+ * For msb first direction x^7 maps to the msb. So the polynomial is as below.
+ *
+ * - msb first: poly = (1)11010101 = 0xD5
+ */
+void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
+
+/**
+ * crc8() - calculate a crc8 over the given input data.
+ *
+ * @table:	crc table used for calculation.
+ * @pdata:	pointer to data buffer.
+ * @nbytes:	number of bytes in data buffer.
+ * @crc:	previous returned crc8 value.
+ *
+ * The CRC8 is calculated using the polynomial given in crc8_populate_msb()
+ * or crc8_populate_lsb().
+ *
+ * The caller provides the initial value (either %CRC8_INIT_VALUE
+ * or the previous returned value) to allow for processing of
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When validating a byte
+ * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE
+ * indicates the byte stream data can be considered valid.
+ *
+ * Reference:
+ * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993
+ * Williams, Ross N., ross<at>ross.net
+ * (see URL http://www.ross.net/crc/download/crc_v3.txt).
+ */
+u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc);
+
+#endif /* __CRC8_H_ */
diff --git a/include/compat/linux/eeprom_93cx6.h b/include/compat/linux/eeprom_93cx6.h
new file mode 100755
index 0000000..c4627cb
--- /dev/null
+++ b/include/compat/linux/eeprom_93cx6.h
@@ -0,0 +1,74 @@
+/*
+	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: eeprom_93cx6
+	Abstract: EEPROM reader datastructures for 93cx6 chipsets.
+	Supported chipsets: 93c46, 93c56 and 93c66.
+ */
+
+/*
+ * EEPROM operation defines.
+ */
+#define PCI_EEPROM_WIDTH_93C46	6
+#define PCI_EEPROM_WIDTH_93C56	8
+#define PCI_EEPROM_WIDTH_93C66	8
+#define PCI_EEPROM_WIDTH_93C86	8
+#define PCI_EEPROM_WIDTH_OPCODE	3
+#define PCI_EEPROM_WRITE_OPCODE	0x05
+#define PCI_EEPROM_READ_OPCODE	0x06
+#define PCI_EEPROM_EWDS_OPCODE	0x10
+#define PCI_EEPROM_EWEN_OPCODE	0x13
+
+/**
+ * struct eeprom_93cx6 - control structure for setting the commands
+ * for reading the eeprom data.
+ * @data: private pointer for the driver.
+ * @register_read(struct eeprom_93cx6 *eeprom): handler to
+ * read the eeprom register, this function should set all reg_* fields.
+ * @register_write(struct eeprom_93cx6 *eeprom): handler to
+ * write to the eeprom register by using all reg_* fields.
+ * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
+ * @reg_data_in: register field to indicate data input
+ * @reg_data_out: register field to indicate data output
+ * @reg_data_clock: register field to set the data clock
+ * @reg_chip_select: register field to set the chip select
+ *
+ * This structure is used for the communication between the driver
+ * and the eeprom_93cx6 handlers for reading the eeprom.
+ */
+struct eeprom_93cx6 {
+	void *data;
+
+	void (*register_read)(struct eeprom_93cx6 *eeprom);
+	void (*register_write)(struct eeprom_93cx6 *eeprom);
+
+	int width;
+
+	char reg_data_in;
+	char reg_data_out;
+	char reg_data_clock;
+	char reg_chip_select;
+};
+
+extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
+	const u8 word, u16 *data);
+extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
+	const u8 word, __le16 *data, const u16 words);
diff --git a/include/compat/linux/export.h b/include/compat/linux/export.h
new file mode 100755
index 0000000..f7842b7
--- /dev/null
+++ b/include/compat/linux/export.h
@@ -0,0 +1,12 @@
+#ifndef _COMPAT_LINUX_EXPORT_H
+#define _COMPAT_LINUX_EXPORT_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0))
+#include_next <linux/export.h>
+#else
+#include <linux/module.h>
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) */
+
+#endif	/* _COMPAT_LINUX_EXPORT_H */
diff --git a/include/compat/linux/ieee80211.h b/include/compat/linux/ieee80211.h
new file mode 100755
index 0000000..015bca2
--- /dev/null
+++ b/include/compat/linux/ieee80211.h
@@ -0,0 +1,1852 @@
+/*
+ * IEEE 802.11 defines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2005, Devicescape Software, Inc.
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LINUX_IEEE80211_H
+#define LINUX_IEEE80211_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * DS bit usage
+ *
+ * TA = transmitter address
+ * RA = receiver address
+ * DA = destination address
+ * SA = source address
+ *
+ * ToDS    FromDS  A1(RA)  A2(TA)  A3      A4      Use
+ * -----------------------------------------------------------------
+ *  0       0       DA      SA      BSSID   -       IBSS/DLS
+ *  0       1       DA      BSSID   SA      -       AP -> STA
+ *  1       0       BSSID   SA      DA      -       AP <- STA
+ *  1       1       RA      TA      DA      SA      unspecified (WDS)
+ */
+
+#define FCS_LEN 4
+
+#define IEEE80211_FCTL_VERS		0x0003
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA		0x2000
+#define IEEE80211_FCTL_PROTECTED	0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+#define IEEE80211_STYPE_ACTION		0x00D0
+
+/* control */
+#define IEEE80211_STYPE_BACK_REQ	0x0080
+#define IEEE80211_STYPE_BACK		0x0090
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA			0x0000
+#define IEEE80211_STYPE_DATA_CFACK		0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL		0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL		0x0030
+#define IEEE80211_STYPE_NULLFUNC		0x0040
+#define IEEE80211_STYPE_CFACK			0x0050
+#define IEEE80211_STYPE_CFPOLL			0x0060
+#define IEEE80211_STYPE_CFACKPOLL		0x0070
+#define IEEE80211_STYPE_QOS_DATA		0x0080
+#define IEEE80211_STYPE_QOS_DATA_CFACK		0x0090
+#define IEEE80211_STYPE_QOS_DATA_CFPOLL		0x00A0
+#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0
+#define IEEE80211_STYPE_QOS_NULLFUNC		0x00C0
+#define IEEE80211_STYPE_QOS_CFACK		0x00D0
+#define IEEE80211_STYPE_QOS_CFPOLL		0x00E0
+#define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0
+
+
+/* miscellaneous IEEE 802.11 constants */
+#define IEEE80211_MAX_FRAG_THRESHOLD	2352
+#define IEEE80211_MAX_RTS_THRESHOLD	2353
+#define IEEE80211_MAX_AID		2007
+#define IEEE80211_MAX_TIM_LEN		251
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   802.11e clarifies the figure in section 7.1.2. The frame body is
+   up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
+#define IEEE80211_MAX_DATA_LEN		2304
+/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
+#define IEEE80211_MAX_FRAME_LEN		2352
+
+#define IEEE80211_MAX_SSID_LEN		32
+
+#define IEEE80211_MAX_MESH_ID_LEN	32
+
+#define IEEE80211_QOS_CTL_LEN		2
+/* 1d tag mask */
+#define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007
+/* TID mask */
+#define IEEE80211_QOS_CTL_TID_MASK		0x000f
+/* EOSP */
+#define IEEE80211_QOS_CTL_EOSP			0x0010
+/* ACK policy */
+#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL	0x0000
+#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK	0x0020
+#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL	0x0040
+#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK	0x0060
+#define IEEE80211_QOS_CTL_ACK_POLICY_MASK	0x0060
+/* A-MSDU 802.11n */
+#define IEEE80211_QOS_CTL_A_MSDU_PRESENT	0x0080
+/* Mesh Control 802.11s */
+#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT  0x0100
+
+/* U-APSD queue for WMM IEs sent by AP */
+#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
+#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK	0x0f
+
+/* U-APSD queues for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO	(1<<0)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI	(1<<1)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK	(1<<2)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE	(1<<3)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK	0x0f
+
+/* U-APSD max SP length for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL	0x00
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2	0x01
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4	0x02
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT	5
+
+#define IEEE80211_HT_CTL_LEN		4
+
+struct ieee80211_hdr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+	u8 addr4[6];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_hdr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+	__le16 qos_ctrl;
+} __attribute__ ((packed));
+
+/**
+ * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_tods(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0;
+}
+
+/**
+ * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_fromds(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0;
+}
+
+/**
+ * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_a4(__le16 fc)
+{
+	__le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
+	return (fc & tmp) == tmp;
+}
+
+/**
+ * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_morefrags(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0;
+}
+
+/**
+ * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_retry(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0;
+}
+
+/**
+ * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_pm(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0;
+}
+
+/**
+ * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_moredata(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0;
+}
+
+/**
+ * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_protected(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0;
+}
+
+/**
+ * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_order(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0;
+}
+
+/**
+ * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_mgmt(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT);
+}
+
+/**
+ * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ctl(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL);
+}
+
+/**
+ * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_qos(__le16 fc)
+{
+	/*
+	 * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need
+	 * to check the one bit
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA);
+}
+
+/**
+ * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_present(__le16 fc)
+{
+	/*
+	 * mask with 0x40 and test that that bit is clear to only return true
+	 * for the data-containing substypes.
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ);
+}
+
+/**
+ * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP);
+}
+
+/**
+ * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_beacon(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
+}
+
+/**
+ * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_atim(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM);
+}
+
+/**
+ * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_disassoc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC);
+}
+
+/**
+ * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_auth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+}
+
+/**
+ * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_deauth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH);
+}
+
+/**
+ * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_action(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION);
+}
+
+/**
+ * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
+}
+
+/**
+ * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK);
+}
+
+/**
+ * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_pspoll(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+}
+
+/**
+ * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_rts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
+}
+
+/**
+ * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
+}
+
+/**
+ * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK);
+}
+
+/**
+ * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfend(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND);
+}
+
+/**
+ * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfendack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK);
+}
+
+/**
+ * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
+}
+
+/**
+ * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_qos_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+}
+
+struct ieee80211s_hdr {
+	u8 flags;
+	u8 ttl;
+	__le32 seqnum;
+	u8 eaddr1[6];
+	u8 eaddr2[6];
+} __attribute__ ((packed));
+
+/* Mesh flags */
+#define MESH_FLAGS_AE_A4	0x1
+#define MESH_FLAGS_AE_A5_A6	0x2
+#define MESH_FLAGS_AE		0x3
+#define MESH_FLAGS_PS_DEEP	0x4
+
+/**
+ * struct ieee80211_quiet_ie
+ *
+ * This structure refers to "Quiet information element"
+ */
+struct ieee80211_quiet_ie {
+	u8 count;
+	u8 period;
+	__le16 duration;
+	__le16 offset;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_msrment_ie
+ *
+ * This structure refers to "Measurement Request/Report information element"
+ */
+struct ieee80211_msrment_ie {
+	u8 token;
+	u8 mode;
+	u8 type;
+	u8 request[0];
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_channel_sw_ie
+ *
+ * This structure refers to "Channel Switch Announcement information element"
+ */
+struct ieee80211_channel_sw_ie {
+	u8 mode;
+	u8 new_ch_num;
+	u8 count;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_tim
+ *
+ * This structure refers to "Traffic Indication Map information element"
+ */
+struct ieee80211_tim_ie {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	/* variable size: 1 - 251 bytes */
+	u8 virtual_map[1];
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_meshconf_ie
+ *
+ * This structure refers to "Mesh Configuration information element"
+ */
+struct ieee80211_meshconf_ie {
+	u8 meshconf_psel;
+	u8 meshconf_pmetric;
+	u8 meshconf_congest;
+	u8 meshconf_synch;
+	u8 meshconf_auth;
+	u8 meshconf_form;
+	u8 meshconf_cap;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_rann_ie
+ *
+ * This structure refers to "Root Announcement information element"
+ */
+struct ieee80211_rann_ie {
+	u8 rann_flags;
+	u8 rann_hopcount;
+	u8 rann_ttl;
+	u8 rann_addr[6];
+	u32 rann_seq;
+	u32 rann_interval;
+	u32 rann_metric;
+} __attribute__ ((packed));
+
+enum ieee80211_rann_flags {
+	RANN_FLAG_IS_GATE = 1 << 0,
+};
+
+#define WLAN_SA_QUERY_TR_ID_LEN 2
+
+struct ieee80211_mgmt {
+	__le16 frame_control;
+	__le16 duration;
+	u8 da[6];
+	u8 sa[6];
+	u8 bssid[6];
+	__le16 seq_ctrl;
+	union {
+		struct {
+			__le16 auth_alg;
+			__le16 auth_transaction;
+			__le16 status_code;
+			/* possibly followed by Challenge text */
+			u8 variable[0];
+		} __attribute__ ((packed)) auth;
+		struct {
+			__le16 reason_code;
+		} __attribute__ ((packed)) deauth;
+		struct {
+			__le16 capab_info;
+			__le16 listen_interval;
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) assoc_req;
+		struct {
+			__le16 capab_info;
+			__le16 status_code;
+			__le16 aid;
+			/* followed by Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) assoc_resp, reassoc_resp;
+		struct {
+			__le16 capab_info;
+			__le16 listen_interval;
+			u8 current_ap[6];
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) reassoc_req;
+		struct {
+			__le16 reason_code;
+		} __attribute__ ((packed)) disassoc;
+		struct {
+			__le64 timestamp;
+			__le16 beacon_int;
+			__le16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
+			u8 variable[0];
+		} __attribute__ ((packed)) beacon;
+		struct {
+			/* only variable items: SSID, Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) probe_req;
+		struct {
+			__le64 timestamp;
+			__le16 beacon_int;
+			__le16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params */
+			u8 variable[0];
+		} __attribute__ ((packed)) probe_resp;
+		struct {
+			u8 category;
+			union {
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u8 status_code;
+					u8 variable[0];
+				} __attribute__ ((packed)) wme_action;
+				struct{
+					u8 action_code;
+					u8 element_id;
+					u8 length;
+					struct ieee80211_channel_sw_ie sw_elem;
+				} __attribute__((packed)) chan_switch;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					u8 element_id;
+					u8 length;
+					struct ieee80211_msrment_ie msr_elem;
+				} __attribute__((packed)) measurement;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 capab;
+					__le16 timeout;
+					__le16 start_seq_num;
+				} __attribute__((packed)) addba_req;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 status;
+					__le16 capab;
+					__le16 timeout;
+				} __attribute__((packed)) addba_resp;
+				struct{
+					u8 action_code;
+					__le16 params;
+					__le16 reason_code;
+				} __attribute__((packed)) delba;
+				struct {
+					u8 action_code;
+					u8 variable[0];
+				} __attribute__((packed)) self_prot;
+				struct{
+					u8 action_code;
+					u8 variable[0];
+				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+				} __attribute__ ((packed)) sa_query;
+				struct {
+					u8 action;
+					u8 smps_control;
+				} __attribute__ ((packed)) ht_smps;
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					__le16 capability;
+					u8 variable[0];
+				} __packed tdls_discover_resp;
+			} u;
+		} __attribute__ ((packed)) action;
+	} u;
+} __attribute__ ((packed));
+
+/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */
+#define BSS_MEMBERSHIP_SELECTOR_HT_PHY	127
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
+
+
+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[8];
+} __attribute__ ((packed));
+
+struct ieee80211_vendor_ie {
+	u8 element_id;
+	u8 len;
+	u8 oui[3];
+	u8 oui_type;
+} __packed;
+
+/* Control frames */
+struct ieee80211_rts {
+	__le16 frame_control;
+	__le16 duration;
+	u8 ra[6];
+	u8 ta[6];
+} __attribute__ ((packed));
+
+struct ieee80211_cts {
+	__le16 frame_control;
+	__le16 duration;
+	u8 ra[6];
+} __attribute__ ((packed));
+
+struct ieee80211_pspoll {
+	__le16 frame_control;
+	__le16 aid;
+	u8 bssid[6];
+	u8 ta[6];
+} __attribute__ ((packed));
+
+/* TDLS */
+
+/* Link-id information element */
+struct ieee80211_tdls_lnkie {
+	u8 ie_type; /* Link Identifier IE */
+	u8 ie_len;
+	u8 bssid[6];
+	u8 init_sta[6];
+	u8 resp_sta[6];
+} __packed;
+
+struct ieee80211_tdls_data {
+	u8 da[6];
+	u8 sa[6];
+	__be16 ether_type;
+	u8 payload_type;
+	u8 category;
+	u8 action_code;
+	union {
+		struct {
+			u8 dialog_token;
+			__le16 capability;
+			u8 variable[0];
+		} __packed setup_req;
+		struct {
+			__le16 status_code;
+			u8 dialog_token;
+			__le16 capability;
+			u8 variable[0];
+		} __packed setup_resp;
+		struct {
+			__le16 status_code;
+			u8 dialog_token;
+			u8 variable[0];
+		} __packed setup_cfm;
+		struct {
+			__le16 reason_code;
+			u8 variable[0];
+		} __packed teardown;
+		struct {
+			u8 dialog_token;
+			u8 variable[0];
+		} __packed discover_req;
+	} u;
+} __packed;
+
+/**
+ * struct ieee80211_bar - HT Block Ack Request
+ *
+ * This structure refers to "HT BlockAckReq" as
+ * described in 802.11n draft section 7.2.1.7.1
+ */
+struct ieee80211_bar {
+	__le16 frame_control;
+	__le16 duration;
+	__u8 ra[6];
+	__u8 ta[6];
+	__le16 control;
+	__le16 start_seq_num;
+} __attribute__((packed));
+
+/* 802.11 BAR control masks */
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL	0x0000
+#define IEEE80211_BAR_CTRL_MULTI_TID		0x0002
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA	0x0004
+#define IEEE80211_BAR_CTRL_TID_INFO_MASK	0xf000
+#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT	12
+
+#define IEEE80211_HT_MCS_MASK_LEN		10
+
+/**
+ * struct ieee80211_mcs_info - MCS information
+ * @rx_mask: RX mask
+ * @rx_highest: highest supported RX rate. If set represents
+ *	the highest supported RX data rate in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest RX data rate supported.
+ * @tx_params: TX parameters
+ */
+struct ieee80211_mcs_info {
+	u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
+	__le16 rx_highest;
+	u8 tx_params;
+	u8 reserved[3];
+} __attribute__((packed));
+
+/* 802.11n HT capability MSC set */
+#define IEEE80211_HT_MCS_RX_HIGHEST_MASK	0x3ff
+#define IEEE80211_HT_MCS_TX_DEFINED		0x01
+#define IEEE80211_HT_MCS_TX_RX_DIFF		0x02
+/* value 0 == 1 stream etc */
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK	0x0C
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT	2
+#define		IEEE80211_HT_MCS_TX_MAX_STREAMS	4
+#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION	0x10
+
+/*
+ * 802.11n D5.0 20.3.5 / 20.6 says:
+ * - indices 0 to 7 and 32 are single spatial stream
+ * - 8 to 31 are multiple spatial streams using equal modulation
+ *   [8..15 for two streams, 16..23 for three and 24..31 for four]
+ * - remainder are multiple spatial streams using unequal modulation
+ */
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
+	(IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
+
+/**
+ * struct ieee80211_ht_cap - HT capabilities
+ *
+ * This structure is the "HT capabilities element" as
+ * described in 802.11n D5.0 7.3.2.57
+ */
+struct ieee80211_ht_cap {
+	__le16 cap_info;
+	u8 ampdu_params_info;
+
+	/* 16 bytes MCS information */
+	struct ieee80211_mcs_info mcs;
+
+	__le16 extended_ht_cap_info;
+	__le32 tx_BF_cap_info;
+	u8 antenna_selection_info;
+} __attribute__ ((packed));
+
+/* 802.11n HT capabilities masks (for cap_info) */
+#define IEEE80211_HT_CAP_LDPC_CODING		0x0001
+#define IEEE80211_HT_CAP_SUP_WIDTH_20_40	0x0002
+#define IEEE80211_HT_CAP_SM_PS			0x000C
+#define		IEEE80211_HT_CAP_SM_PS_SHIFT	2
+#define IEEE80211_HT_CAP_GRN_FLD		0x0010
+#define IEEE80211_HT_CAP_SGI_20			0x0020
+#define IEEE80211_HT_CAP_SGI_40			0x0040
+#define IEEE80211_HT_CAP_TX_STBC		0x0080
+#define IEEE80211_HT_CAP_RX_STBC		0x0300
+#define		IEEE80211_HT_CAP_RX_STBC_SHIFT	8
+#define IEEE80211_HT_CAP_DELAY_BA		0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
+#define IEEE80211_HT_CAP_RESERVED		0x2000
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT	0x4000
+#define IEEE80211_HT_CAP_LSIG_TXOP_PROT		0x8000
+
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO		0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME		0x0006
+#define		IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT	1
+#define IEEE80211_HT_EXT_CAP_MCS_FB		0x0300
+#define		IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT	8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP		0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER	0x0800
+
+/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
+#define IEEE80211_HT_AMPDU_PARM_FACTOR		0x03
+#define IEEE80211_HT_AMPDU_PARM_DENSITY		0x1C
+#define		IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT	2
+
+/*
+ * Maximum length of AMPDU that the STA can receive.
+ * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+ */
+enum ieee80211_max_ampdu_length_exp {
+	IEEE80211_HT_MAX_AMPDU_8K = 0,
+	IEEE80211_HT_MAX_AMPDU_16K = 1,
+	IEEE80211_HT_MAX_AMPDU_32K = 2,
+	IEEE80211_HT_MAX_AMPDU_64K = 3
+};
+
+#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
+
+/* Minimum MPDU start spacing */
+enum ieee80211_min_mpdu_spacing {
+	IEEE80211_HT_MPDU_DENSITY_NONE = 0,	/* No restriction */
+	IEEE80211_HT_MPDU_DENSITY_0_25 = 1,	/* 1/4 usec */
+	IEEE80211_HT_MPDU_DENSITY_0_5 = 2,	/* 1/2 usec */
+	IEEE80211_HT_MPDU_DENSITY_1 = 3,	/* 1 usec */
+	IEEE80211_HT_MPDU_DENSITY_2 = 4,	/* 2 usec */
+	IEEE80211_HT_MPDU_DENSITY_4 = 5,	/* 4 usec */
+	IEEE80211_HT_MPDU_DENSITY_8 = 6,	/* 8 usec */
+	IEEE80211_HT_MPDU_DENSITY_16 = 7	/* 16 usec */
+};
+
+/**
+ * struct ieee80211_ht_info - HT information
+ *
+ * This structure is the "HT information element" as
+ * described in 802.11n D5.0 7.3.2.58
+ */
+struct ieee80211_ht_info {
+	u8 control_chan;
+	u8 ht_param;
+	__le16 operation_mode;
+	__le16 stbc_param;
+	u8 basic_set[16];
+} __attribute__ ((packed));
+
+/* for ht_param */
+#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET		0x03
+#define		IEEE80211_HT_PARAM_CHA_SEC_NONE		0x00
+#define		IEEE80211_HT_PARAM_CHA_SEC_ABOVE	0x01
+#define		IEEE80211_HT_PARAM_CHA_SEC_BELOW	0x03
+#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY		0x04
+#define IEEE80211_HT_PARAM_RIFS_MODE			0x08
+#define IEEE80211_HT_PARAM_SPSMP_SUPPORT		0x10
+#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN		0xE0
+
+/* for operation_mode */
+#define IEEE80211_HT_OP_MODE_PROTECTION			0x0003
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONE		0
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER	1
+#define		IEEE80211_HT_OP_MODE_PROTECTION_20MHZ		2
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED	3
+#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT		0x0004
+#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT		0x0010
+
+/* for stbc_param */
+#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON		0x0040
+#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT		0x0080
+#define IEEE80211_HT_STBC_PARAM_STBC_BEACON		0x0100
+#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT	0x0200
+#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE		0x0400
+#define IEEE80211_HT_STBC_PARAM_PCO_PHASE		0x0800
+
+
+/* block-ack parameters */
+#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
+#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
+#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
+#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
+
+/*
+ * A-PMDU buffer sizes
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+
+
+/* Spatial Multiplexing Power Save Modes (for capability) */
+#define WLAN_HT_CAP_SM_PS_STATIC	0
+#define WLAN_HT_CAP_SM_PS_DYNAMIC	1
+#define WLAN_HT_CAP_SM_PS_INVALID	2
+#define WLAN_HT_CAP_SM_PS_DISABLED	3
+
+/* for SM power control field lower two bits */
+#define WLAN_HT_SMPS_CONTROL_DISABLED	0
+#define WLAN_HT_SMPS_CONTROL_STATIC	1
+#define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FT 2
+#define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_LEAP 128
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_ESS		(1<<0)
+#define WLAN_CAPABILITY_IBSS		(1<<1)
+
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
+	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
+#define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3)
+#define WLAN_CAPABILITY_PRIVACY		(1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE	(1<<5)
+#define WLAN_CAPABILITY_PBCC		(1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY	(1<<7)
+
+/* 802.11h */
+#define WLAN_CAPABILITY_SPECTRUM_MGMT	(1<<8)
+#define WLAN_CAPABILITY_QOS		(1<<9)
+#define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
+#define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
+/* measurement */
+#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED	(1<<2)
+
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC	0
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
+
+
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* WLAN_ERP_BARKER_PREAMBLE values */
+enum {
+	WLAN_ERP_PREAMBLE_SHORT = 0,
+	WLAN_ERP_PREAMBLE_LONG = 1,
+};
+
+/* Status codes */
+enum ieee80211_statuscode {
+	WLAN_STATUS_SUCCESS = 0,
+	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
+	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
+	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
+	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
+	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
+	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
+	WLAN_STATUS_CHALLENGE_FAIL = 15,
+	WLAN_STATUS_AUTH_TIMEOUT = 16,
+	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
+	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
+	/* 802.11b */
+	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
+	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
+	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
+	/* 802.11h */
+	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
+	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
+	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
+	/* 802.11g */
+	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
+	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+	/* 802.11w */
+	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
+	/* 802.11i */
+	WLAN_STATUS_INVALID_IE = 40,
+	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
+	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
+	WLAN_STATUS_INVALID_AKMP = 43,
+	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
+	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
+	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
+	/* 802.11e */
+	WLAN_STATUS_UNSPECIFIED_QOS = 32,
+	WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
+	WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
+	WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
+	WLAN_STATUS_REQUEST_DECLINED = 37,
+	WLAN_STATUS_INVALID_QOS_PARAM = 38,
+	WLAN_STATUS_CHANGE_TSPEC = 39,
+	WLAN_STATUS_WAIT_TS_DELAY = 47,
+	WLAN_STATUS_NO_DIRECT_LINK = 48,
+	WLAN_STATUS_STA_NOT_PRESENT = 49,
+	WLAN_STATUS_STA_NOT_QSTA = 50,
+	/* 802.11s */
+	WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
+	WLAN_STATUS_FCG_NOT_SUPP = 78,
+	WLAN_STATUS_STA_NO_TBTT = 78,
+};
+
+
+/* Reason codes */
+enum ieee80211_reasoncode {
+	WLAN_REASON_UNSPECIFIED = 1,
+	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
+	WLAN_REASON_DEAUTH_LEAVING = 3,
+	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
+	WLAN_REASON_DISASSOC_AP_BUSY = 5,
+	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
+	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
+	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
+	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
+	/* 802.11h */
+	WLAN_REASON_DISASSOC_BAD_POWER = 10,
+	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
+	/* 802.11i */
+	WLAN_REASON_INVALID_IE = 13,
+	WLAN_REASON_MIC_FAILURE = 14,
+	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
+	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
+	WLAN_REASON_IE_DIFFERENT = 17,
+	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
+	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
+	WLAN_REASON_INVALID_AKMP = 20,
+	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
+	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
+	WLAN_REASON_IEEE8021X_FAILED = 23,
+	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+	/* 802.11e */
+	WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
+	WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
+	WLAN_REASON_DISASSOC_LOW_ACK = 34,
+	WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
+	WLAN_REASON_QSTA_LEAVE_QBSS = 36,
+	WLAN_REASON_QSTA_NOT_USE = 37,
+	WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
+	WLAN_REASON_QSTA_TIMEOUT = 39,
+	WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
+	/* 802.11s */
+	WLAN_REASON_MESH_PEER_CANCELED = 52,
+	WLAN_REASON_MESH_MAX_PEERS = 53,
+	WLAN_REASON_MESH_CONFIG = 54,
+	WLAN_REASON_MESH_CLOSE = 55,
+	WLAN_REASON_MESH_MAX_RETRIES = 56,
+	WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57,
+	WLAN_REASON_MESH_INVALID_GTK = 58,
+	WLAN_REASON_MESH_INCONSISTENT_PARAM = 59,
+	WLAN_REASON_MESH_INVALID_SECURITY = 60,
+	WLAN_REASON_MESH_PATH_ERROR = 61,
+	WLAN_REASON_MESH_PATH_NOFORWARD = 62,
+	WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63,
+	WLAN_REASON_MAC_EXISTS_IN_MBSS = 64,
+	WLAN_REASON_MESH_CHAN_REGULATORY = 65,
+	WLAN_REASON_MESH_CHAN = 66,
+};
+
+
+/* Information Element IDs */
+enum ieee80211_eid {
+	WLAN_EID_SSID = 0,
+	WLAN_EID_SUPP_RATES = 1,
+	WLAN_EID_FH_PARAMS = 2,
+	WLAN_EID_DS_PARAMS = 3,
+	WLAN_EID_CF_PARAMS = 4,
+	WLAN_EID_TIM = 5,
+	WLAN_EID_IBSS_PARAMS = 6,
+	WLAN_EID_CHALLENGE = 16,
+
+	WLAN_EID_COUNTRY = 7,
+	WLAN_EID_HP_PARAMS = 8,
+	WLAN_EID_HP_TABLE = 9,
+	WLAN_EID_REQUEST = 10,
+
+	WLAN_EID_QBSS_LOAD = 11,
+	WLAN_EID_EDCA_PARAM_SET = 12,
+	WLAN_EID_TSPEC = 13,
+	WLAN_EID_TCLAS = 14,
+	WLAN_EID_SCHEDULE = 15,
+	WLAN_EID_TS_DELAY = 43,
+	WLAN_EID_TCLAS_PROCESSING = 44,
+	WLAN_EID_QOS_CAPA = 46,
+	/* 802.11z */
+	WLAN_EID_LINK_ID = 101,
+	/* 802.11s */
+	WLAN_EID_MESH_CONFIG = 113,
+	WLAN_EID_MESH_ID = 114,
+	WLAN_EID_LINK_METRIC_REPORT = 115,
+	WLAN_EID_CONGESTION_NOTIFICATION = 116,
+	WLAN_EID_PEER_MGMT = 117,
+	WLAN_EID_CHAN_SWITCH_PARAM = 118,
+	WLAN_EID_MESH_AWAKE_WINDOW = 119,
+	WLAN_EID_BEACON_TIMING = 120,
+	WLAN_EID_MCCAOP_SETUP_REQ = 121,
+	WLAN_EID_MCCAOP_SETUP_RESP = 122,
+	WLAN_EID_MCCAOP_ADVERT = 123,
+	WLAN_EID_MCCAOP_TEARDOWN = 124,
+	WLAN_EID_GANN = 125,
+	WLAN_EID_RANN = 126,
+	WLAN_EID_PREQ = 130,
+	WLAN_EID_PREP = 131,
+	WLAN_EID_PERR = 132,
+	WLAN_EID_PXU = 137,
+	WLAN_EID_PXUC = 138,
+	WLAN_EID_AUTH_MESH_PEER_EXCH = 139,
+	WLAN_EID_MIC = 140,
+
+	WLAN_EID_PWR_CONSTRAINT = 32,
+	WLAN_EID_PWR_CAPABILITY = 33,
+	WLAN_EID_TPC_REQUEST = 34,
+	WLAN_EID_TPC_REPORT = 35,
+	WLAN_EID_SUPPORTED_CHANNELS = 36,
+	WLAN_EID_CHANNEL_SWITCH = 37,
+	WLAN_EID_MEASURE_REQUEST = 38,
+	WLAN_EID_MEASURE_REPORT = 39,
+	WLAN_EID_QUIET = 40,
+	WLAN_EID_IBSS_DFS = 41,
+
+	WLAN_EID_ERP_INFO = 42,
+	WLAN_EID_EXT_SUPP_RATES = 50,
+
+	WLAN_EID_HT_CAPABILITY = 45,
+	WLAN_EID_HT_INFORMATION = 61,
+
+	WLAN_EID_RSN = 48,
+	WLAN_EID_MMIE = 76,
+	WLAN_EID_WPA = 221,
+	WLAN_EID_GENERIC = 221,
+	WLAN_EID_VENDOR_SPECIFIC = 221,
+	WLAN_EID_QOS_PARAMETER = 222,
+
+	WLAN_EID_AP_CHAN_REPORT = 51,
+	WLAN_EID_NEIGHBOR_REPORT = 52,
+	WLAN_EID_RCPI = 53,
+	WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
+	WLAN_EID_ANTENNA_INFO = 64,
+	WLAN_EID_RSNI = 65,
+	WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
+	WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
+	WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
+	WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
+	WLAN_EID_MULTIPLE_BSSID = 71,
+	WLAN_EID_BSS_COEX_2040 = 72,
+	WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
+	WLAN_EID_EXT_CAPABILITY = 127,
+
+	WLAN_EID_MOBILITY_DOMAIN = 54,
+	WLAN_EID_FAST_BSS_TRANSITION = 55,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_RIC_DATA = 57,
+	WLAN_EID_RIC_DESCRIPTOR = 75,
+
+	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
+	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
+	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+};
+
+/* Action category code */
+enum ieee80211_category {
+	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+	WLAN_CATEGORY_QOS = 1,
+	WLAN_CATEGORY_DLS = 2,
+	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_HT = 7,
+	WLAN_CATEGORY_SA_QUERY = 8,
+	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
+	WLAN_CATEGORY_TDLS = 12,
+	WLAN_CATEGORY_MESH_ACTION = 13,
+	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
+	WLAN_CATEGORY_SELF_PROTECTED = 15,
+	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+	WLAN_ACTION_SPCT_MSR_REQ = 0,
+	WLAN_ACTION_SPCT_MSR_RPRT = 1,
+	WLAN_ACTION_SPCT_TPC_REQ = 2,
+	WLAN_ACTION_SPCT_TPC_RPRT = 3,
+	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+};
+
+/* HT action codes */
+enum ieee80211_ht_actioncode {
+	WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
+	WLAN_HT_ACTION_SMPS = 1,
+	WLAN_HT_ACTION_PSMP = 2,
+	WLAN_HT_ACTION_PCO_PHASE = 3,
+	WLAN_HT_ACTION_CSI = 4,
+	WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
+	WLAN_HT_ACTION_COMPRESSED_BF = 6,
+	WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
+};
+
+/* Self Protected Action codes */
+enum ieee80211_self_protected_actioncode {
+	WLAN_SP_RESERVED = 0,
+	WLAN_SP_MESH_PEERING_OPEN = 1,
+	WLAN_SP_MESH_PEERING_CONFIRM = 2,
+	WLAN_SP_MESH_PEERING_CLOSE = 3,
+	WLAN_SP_MGK_INFORM = 4,
+	WLAN_SP_MGK_ACK = 5,
+};
+
+/* Mesh action codes */
+enum ieee80211_mesh_actioncode {
+	WLAN_MESH_ACTION_LINK_METRIC_REPORT,
+	WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
+	WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
+	WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
+	WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
+	WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
+	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
+	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
+	WLAN_MESH_ACTION_MCCA_TEARDOWN,
+	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
+	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
+};
+
+/* Security key length */
+enum ieee80211_key_len {
+	WLAN_KEY_LEN_WEP40 = 5,
+	WLAN_KEY_LEN_WEP104 = 13,
+	WLAN_KEY_LEN_CCMP = 16,
+	WLAN_KEY_LEN_TKIP = 32,
+	WLAN_KEY_LEN_AES_CMAC = 16,
+};
+
+/* Public action codes */
+enum ieee80211_pub_actioncode {
+	WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14,
+};
+
+/* TDLS action codes */
+enum ieee80211_tdls_actioncode {
+	WLAN_TDLS_SETUP_REQUEST = 0,
+	WLAN_TDLS_SETUP_RESPONSE = 1,
+	WLAN_TDLS_SETUP_CONFIRM = 2,
+	WLAN_TDLS_TEARDOWN = 3,
+	WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4,
+	WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5,
+	WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6,
+	WLAN_TDLS_PEER_PSM_REQUEST = 7,
+	WLAN_TDLS_PEER_PSM_RESPONSE = 8,
+	WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9,
+	WLAN_TDLS_DISCOVERY_REQUEST = 10,
+};
+
+/*
+ * TDLS capabililites to be enabled in the 5th byte of the
+ * @WLAN_EID_EXT_CAPABILITY information element
+ */
+#define WLAN_EXT_CAPA5_TDLS_ENABLED	BIT(5)
+#define WLAN_EXT_CAPA5_TDLS_PROHIBITED	BIT(6)
+
+/* TDLS specific payload type in the LLC/SNAP header */
+#define WLAN_TDLS_SNAP_RFTYPE	0x2
+
+/**
+ * enum - mesh path selection protocol identifier
+ *
+ * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
+ * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
+ * be specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_PROTOCOL_HWMP = 0,
+	IEEE80211_PATH_PROTOCOL_VENDOR = 255,
+};
+
+/**
+ * enum - mesh path selection metric identifier
+ *
+ * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
+ * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
+ * specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_METRIC_AIRTIME = 0,
+	IEEE80211_PATH_METRIC_VENDOR = 255,
+};
+
+
+/*
+ * IEEE 802.11-2007 7.3.2.9 Country information element
+ *
+ * Minimum length is 8 octets, ie len must be evenly
+ * divisible by 2
+ */
+
+/* Although the spec says 8 I'm seeing 6 in practice */
+#define IEEE80211_COUNTRY_IE_MIN_LEN	6
+
+/* The Country String field of the element shall be 3 octets in length */
+#define IEEE80211_COUNTRY_STRING_LEN	3
+
+/*
+ * For regulatory extension stuff see IEEE 802.11-2007
+ * Annex I (page 1141) and Annex J (page 1147). Also
+ * review 7.3.2.9.
+ *
+ * When dot11RegulatoryClassesRequired is true and the
+ * first_channel/reg_extension_id is >= 201 then the IE
+ * compromises of the 'ext' struct represented below:
+ *
+ *  - Regulatory extension ID - when generating IE this just needs
+ *    to be monotonically increasing for each triplet passed in
+ *    the IE
+ *  - Regulatory class - index into set of rules
+ *  - Coverage class - index into air propagation time (Table 7-27),
+ *    in microseconds, you can compute the air propagation time from
+ *    the index by multiplying by 3, so index 10 yields a propagation
+ *    of 10 us. Valid values are 0-31, values 32-255 are not defined
+ *    yet. A value of 0 inicates air propagation of <= 1 us.
+ *
+ *  See also Table I.2 for Emission limit sets and table
+ *  I.3 for Behavior limit sets. Table J.1 indicates how to map
+ *  a reg_class to an emission limit set and behavior limit set.
+ */
+#define IEEE80211_COUNTRY_EXTENSION_ID 201
+
+/*
+ *  Channels numbers in the IE must be monotonically increasing
+ *  if dot11RegulatoryClassesRequired is not true.
+ *
+ *  If dot11RegulatoryClassesRequired is true consecutive
+ *  subband triplets following a regulatory triplet shall
+ *  have monotonically increasing first_channel number fields.
+ *
+ *  Channel numbers shall not overlap.
+ *
+ *  Note that max_power is signed.
+ */
+struct ieee80211_country_ie_triplet {
+	union {
+		struct {
+			u8 first_channel;
+			u8 num_channels;
+			s8 max_power;
+		} __attribute__ ((packed)) chans;
+		struct {
+			u8 reg_extension_id;
+			u8 reg_class;
+			u8 coverage_class;
+		} __attribute__ ((packed)) ext;
+	};
+} __attribute__ ((packed));
+
+enum ieee80211_timeout_interval_type {
+	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+	WLAN_ACTION_ADDBA_REQ = 0,
+	WLAN_ACTION_ADDBA_RESP = 1,
+	WLAN_ACTION_DELBA = 2,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+	WLAN_BACK_RECIPIENT = 0,
+	WLAN_BACK_INITIATOR = 1,
+};
+
+/* SA Query action */
+enum ieee80211_sa_query_action {
+	WLAN_ACTION_SA_QUERY_REQUEST = 0,
+	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
+/* cipher suite selectors */
+#define WLAN_CIPHER_SUITE_USE_GROUP	0x000FAC00
+#define WLAN_CIPHER_SUITE_WEP40		0x000FAC01
+#define WLAN_CIPHER_SUITE_TKIP		0x000FAC02
+/* reserved:				0x000FAC03 */
+#define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
+#define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
+
+#define WLAN_CIPHER_SUITE_SMS4		0x00147201
+
+/* AKM suite selectors */
+#define WLAN_AKM_SUITE_8021X		0x000FAC01
+#define WLAN_AKM_SUITE_PSK		0x000FAC02
+#define WLAN_AKM_SUITE_SAE			0x000FAC08
+#define WLAN_AKM_SUITE_FT_OVER_SAE	0x000FAC09
+
+#define WLAN_MAX_KEY_LEN		32
+
+#define WLAN_PMKID_LEN			16
+
+#define WLAN_OUI_WFA			0x506f9a
+#define WLAN_OUI_TYPE_WFA_P2P		9
+
+/*
+ * WMM/802.11e Tspec Element
+ */
+#define IEEE80211_WMM_IE_TSPEC_TID_MASK		0x0F
+#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT	1
+
+enum ieee80211_tspec_status_code {
+	IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0,
+	IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1,
+};
+
+struct ieee80211_tspec_ie {
+	u8 element_id;
+	u8 len;
+	u8 oui[3];
+	u8 oui_type;
+	u8 oui_subtype;
+	u8 version;
+	__le16 tsinfo;
+	u8 tsinfo_resvd;
+	__le16 nominal_msdu;
+	__le16 max_msdu;
+	__le32 min_service_int;
+	__le32 max_service_int;
+	__le32 inactivity_int;
+	__le32 suspension_int;
+	__le32 service_start_time;
+	__le32 min_data_rate;
+	__le32 mean_data_rate;
+	__le32 peak_data_rate;
+	__le32 max_burst_size;
+	__le32 delay_bound;
+	__le32 min_phy_rate;
+	__le16 sba;
+	__le16 medium_time;
+} __packed;
+
+/**
+ * ieee80211_get_qos_ctl - get pointer to qos control bytes
+ * @hdr: the frame
+ *
+ * The qos ctrl bytes come after the frame_control, duration, seq_num
+ * and 3 or 4 addresses of length ETH_ALEN.
+ * 3 addr: 2 + 2 + 2 + 3*6 = 24
+ * 4 addr: 2 + 2 + 2 + 4*6 = 30
+ */
+static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_a4(hdr->frame_control))
+		return (u8 *)hdr + 30;
+	else
+		return (u8 *)hdr + 24;
+}
+
+/**
+ * ieee80211_get_SA - get pointer to SA
+ * @hdr: the frame
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the source address (SA). It does not verify that the
+ * header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ */
+static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_a4(hdr->frame_control))
+		return hdr->addr4;
+	if (ieee80211_has_fromds(hdr->frame_control))
+		return hdr->addr3;
+	return hdr->addr2;
+}
+
+/**
+ * ieee80211_get_DA - get pointer to DA
+ * @hdr: the frame
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the destination address (DA). It does not verify that
+ * the header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ */
+static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_tods(hdr->frame_control))
+		return hdr->addr3;
+	else
+		return hdr->addr1;
+}
+
+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_disassoc(hdr->frame_control) ||
+	    ieee80211_is_deauth(hdr->frame_control))
+		return true;
+
+	if (ieee80211_is_action(hdr->frame_control)) {
+		u8 *category;
+
+		/*
+		 * Action frames, excluding Public Action frames, are Robust
+		 * Management Frames. However, if we are looking at a Protected
+		 * frame, skip the check since the data may be encrypted and
+		 * the frame has already been found to be a Robust Management
+		 * Frame (by the other end).
+		 */
+		if (ieee80211_has_protected(hdr->frame_control))
+			return true;
+		category = ((u8 *) hdr) + 24;
+		return *category != WLAN_CATEGORY_PUBLIC &&
+			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_SELF_PROTECTED &&
+			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
+	}
+
+	return false;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+	if ((channel > 1) && (channel < 96))
+		return channel + 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+	if ((freq > 2401) && (freq < 2496))
+		return freq - 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+	if ((channel > 0) && (channel < 14))
+		return 2407 + (channel * 5);
+	else if (channel == 14)
+		return 2484;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+	if ((freq >= 2410) && (freq < 2475))
+		return (freq - 2405) / 5;
+	else if ((freq >= 2482) && (freq < 2487))
+		return 14;
+	else
+		return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+	if ((channel > 0) && (channel <= 200) &&
+	    (s_freq >= 4000))
+		return s_freq + (channel * 5);
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+	    (s_freq >= 4000))
+		return (freq + 2 - s_freq) / 5;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+	return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+				       u8 tim_len, u16 aid)
+{
+	u8 mask;
+	u8 index, indexn1, indexn2;
+
+	if (unlikely(!tim || tim_len < sizeof(*tim)))
+		return false;
+
+	aid &= 0x3fff;
+	index = aid / 8;
+	mask  = 1 << (aid & 7);
+
+	indexn1 = tim->bitmap_ctrl & 0xfe;
+	indexn2 = tim_len + indexn1 - 4;
+
+	if (index < indexn1 || index > indexn2)
+		return false;
+
+	index -= indexn1;
+
+	return !!(tim->virtual_map[index] & mask);
+}
+
+#endif /* LINUX_IEEE80211_H */
diff --git a/include/compat/linux/kfifo.h b/include/compat/linux/kfifo.h
new file mode 100755
index 0000000..e30bb54
--- /dev/null
+++ b/include/compat/linux/kfifo.h
@@ -0,0 +1,857 @@
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
+#include_next <linux/kfifo.h>
+#else
+/*
+ * A generic kernel FIFO implementation
+ *
+ * Copyright (C) 2009/2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _LINUX_KFIFO_H
+#define _LINUX_KFIFO_H
+
+/*
+ * How to porting drivers to the new generic FIFO API:
+ *
+ * - Modify the declaration of the "struct kfifo *" object into a
+ *   in-place "struct kfifo" object
+ * - Init the in-place object with kfifo_alloc() or kfifo_init()
+ *   Note: The address of the in-place "struct kfifo" object must be
+ *   passed as the first argument to this functions
+ * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get
+ *   into kfifo_out
+ * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get
+ *   into kfifo_out_spinlocked
+ *   Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc
+ *   must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked
+ *   as the last parameter
+ * - The formerly __kfifo_* functions are renamed into kfifo_*
+ */
+
+/*
+ * Note about locking : There is no locking required until only * one reader
+ * and one writer is using the fifo and no kfifo_reset() will be * called
+ *  kfifo_reset_out() can be safely used, until it will be only called
+ * in the reader thread.
+ *  For multiple writer and one reader there is only a need to lock the writer.
+ * And vice versa for only one writer and multiple reader there is only a need
+ * to lock the reader.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/scatterlist.h>
+
+struct __kfifo {
+	unsigned int	in;
+	unsigned int	out;
+	unsigned int	mask;
+	unsigned int	esize;
+	void		*data;
+};
+
+#define __STRUCT_KFIFO_COMMON(datatype, recsize, ptrtype) \
+	union { \
+		struct __kfifo	kfifo; \
+		datatype	*type; \
+		char		(*rectype)[recsize]; \
+		ptrtype		*ptr; \
+		const ptrtype	*ptr_const; \
+	}
+
+#define __STRUCT_KFIFO(type, size, recsize, ptrtype) \
+{ \
+	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+	type		buf[((size < 2) || (size & (size - 1))) ? -1 : size]; \
+}
+
+#define STRUCT_KFIFO(type, size) \
+	struct __STRUCT_KFIFO(type, size, 0, type)
+
+#define __STRUCT_KFIFO_PTR(type, recsize, ptrtype) \
+{ \
+	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+	type		buf[0]; \
+}
+
+#define STRUCT_KFIFO_PTR(type) \
+	struct __STRUCT_KFIFO_PTR(type, 0, type)
+
+/*
+ * define compatibility "struct kfifo" for dynamic allocated fifos
+ */
+struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void);
+
+#define STRUCT_KFIFO_REC_1(size) \
+	struct __STRUCT_KFIFO(unsigned char, size, 1, void)
+
+#define STRUCT_KFIFO_REC_2(size) \
+	struct __STRUCT_KFIFO(unsigned char, size, 2, void)
+
+/*
+ * define kfifo_rec types
+ */
+struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void);
+struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
+
+/*
+ * helper macro to distinguish between real in place fifo where the fifo
+ * array is a part of the structure and the fifo type where the array is
+ * outside of the fifo structure.
+ */
+#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
+
+/**
+ * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
+ */
+#define DECLARE_KFIFO_PTR(fifo, type)	STRUCT_KFIFO_PTR(type) fifo
+
+/**
+ * DECLARE_KFIFO - macro to declare a fifo object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
+ */
+#define DECLARE_KFIFO(fifo, type, size)	STRUCT_KFIFO(type, size) fifo
+
+/**
+ * INIT_KFIFO - Initialize a fifo declared by DECLARE_KFIFO
+ * @fifo: name of the declared fifo datatype
+ */
+#define INIT_KFIFO(fifo) \
+(void)({ \
+	typeof(&(fifo)) __tmp = &(fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__kfifo->in = 0; \
+	__kfifo->out = 0; \
+	__kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\
+	__kfifo->esize = sizeof(*__tmp->buf); \
+	__kfifo->data = __is_kfifo_ptr(__tmp) ?  NULL : __tmp->buf; \
+})
+
+/**
+ * DEFINE_KFIFO - macro to define and initialize a fifo
+ * @fifo: name of the declared fifo datatype
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
+ *
+ * Note: the macro can be used for global and local fifo data type variables.
+ */
+#define DEFINE_KFIFO(fifo, type, size) \
+	DECLARE_KFIFO(fifo, type, size) = \
+	(typeof(fifo)) { \
+		{ \
+			{ \
+			.in	= 0, \
+			.out	= 0, \
+			.mask	= __is_kfifo_ptr(&(fifo)) ? \
+				  0 : \
+				  ARRAY_SIZE((fifo).buf) - 1, \
+			.esize	= sizeof(*(fifo).buf), \
+			.data	= __is_kfifo_ptr(&(fifo)) ? \
+				NULL : \
+				(fifo).buf, \
+			} \
+		} \
+	}
+
+
+static inline unsigned int __must_check
+__kfifo_uint_must_check_helper(unsigned int val)
+{
+	return val;
+}
+
+static inline int __must_check
+__kfifo_int_must_check_helper(int val)
+{
+	return val;
+}
+
+/**
+ * kfifo_initialized - Check if the fifo is initialized
+ * @fifo: address of the fifo to check
+ *
+ * Return %true if fifo is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+#define kfifo_initialized(fifo) ((fifo)->kfifo.mask)
+
+/**
+ * kfifo_esize - returns the size of the element managed by the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_esize(fifo)	((fifo)->kfifo.esize)
+
+/**
+ * kfifo_recsize - returns the size of the record length field
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_recsize(fifo)	(sizeof(*(fifo)->rectype))
+
+/**
+ * kfifo_size - returns the size of the fifo in elements
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_size(fifo)	((fifo)->kfifo.mask + 1)
+
+/**
+ * kfifo_reset - removes the entire fifo content
+ * @fifo: address of the fifo to be used
+ *
+ * Note: usage of kfifo_reset() is dangerous. It should be only called when the
+ * fifo is exclusived locked or when it is secured that no other thread is
+ * accessing the fifo.
+ */
+#define kfifo_reset(fifo) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	__tmp->kfifo.in = __tmp->kfifo.out = 0; \
+})
+
+/**
+ * kfifo_reset_out - skip fifo content
+ * @fifo: address of the fifo to be used
+ *
+ * Note: The usage of kfifo_reset_out() is safe until it will be only called
+ * from the reader thread and there is only one concurrent reader. Otherwise
+ * it is dangerous and must be handled in the same way as kfifo_reset().
+ */
+#define kfifo_reset_out(fifo)	\
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	__tmp->kfifo.out = __tmp->kfifo.in; \
+})
+
+/**
+ * kfifo_len - returns the number of used elements in the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_len(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpl = (fifo); \
+	__tmpl->kfifo.in - __tmpl->kfifo.out; \
+})
+
+/**
+ * kfifo_is_empty - returns true if the fifo is empty
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_is_empty(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	__tmpq->kfifo.in == __tmpq->kfifo.out; \
+})
+
+/**
+ * kfifo_is_full - returns true if the fifo is full
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_is_full(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	kfifo_len(__tmpq) > __tmpq->kfifo.mask; \
+})
+
+/**
+ * kfifo_avail - returns the number of unused elements in the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_avail(fifo) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	const size_t __recsize = sizeof(*__tmpq->rectype); \
+	unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \
+	(__recsize) ? ((__avail <= __recsize) ? 0 : \
+	__kfifo_max_r(__avail - __recsize, __recsize)) : \
+	__avail; \
+}) \
+)
+
+/**
+ * kfifo_skip - skip output data
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_skip(fifo) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_skip_r(__kfifo, __recsize); \
+	else \
+		__kfifo->out++; \
+})
+
+/**
+ * kfifo_peek_len - gets the size of the next fifo record
+ * @fifo: address of the fifo to be used
+ *
+ * This function returns the size of the next fifo record in number of bytes.
+ */
+#define kfifo_peek_len(fifo) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \
+	__kfifo_len_r(__kfifo, __recsize); \
+}) \
+)
+
+/**
+ * kfifo_alloc - dynamically allocates a new fifo buffer
+ * @fifo: pointer to the fifo
+ * @size: the number of elements in the fifo, this must be a power of 2
+ * @gfp_mask: get_free_pages mask, passed to kmalloc()
+ *
+ * This macro dynamically allocates a new fifo buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * The fifo will be release with kfifo_free().
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_alloc(fifo, size, gfp_mask) \
+__kfifo_int_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__is_kfifo_ptr(__tmp) ? \
+	__kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \
+	-EINVAL; \
+}) \
+)
+
+/**
+ * kfifo_free - frees the fifo
+ * @fifo: the fifo to be freed
+ */
+#define kfifo_free(fifo) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__is_kfifo_ptr(__tmp)) \
+		__kfifo_free(__kfifo); \
+})
+
+/**
+ * kfifo_init - initialize a fifo using a preallocated buffer
+ * @fifo: the fifo to assign the buffer
+ * @buffer: the preallocated buffer to be used
+ * @size: the size of the internal buffer, this have to be a power of 2
+ *
+ * This macro initialize a fifo using a preallocated buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_init(fifo, buffer, size) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__is_kfifo_ptr(__tmp) ? \
+	__kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \
+	-EINVAL; \
+})
+
+/**
+ * kfifo_put - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the data to be added
+ *
+ * This macro copies the given value into the fifo.
+ * It returns 0 if the fifo was full. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_put(fifo, val) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+		__dummy = (typeof(__val))NULL; \
+	} \
+	if (__recsize) \
+		__ret = __kfifo_in_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_full(__tmp); \
+		if (__ret) { \
+			(__is_kfifo_ptr(__tmp) ? \
+			((typeof(__tmp->type))__kfifo->data) : \
+			(__tmp->buf) \
+			)[__kfifo->in & __tmp->kfifo.mask] = \
+				*(typeof(__tmp->type))__val; \
+			smp_wmb(); \
+			__kfifo->in++; \
+		} \
+	} \
+	__ret; \
+})
+
+/**
+ * kfifo_get - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This macro reads the data from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_get(fifo, val) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) \
+		__val = (typeof(__tmp->ptr))0; \
+	if (__recsize) \
+		__ret = __kfifo_out_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_empty(__tmp); \
+		if (__ret) { \
+			*(typeof(__tmp->type))__val = \
+				(__is_kfifo_ptr(__tmp) ? \
+				((typeof(__tmp->type))__kfifo->data) : \
+				(__tmp->buf) \
+				)[__kfifo->out & __tmp->kfifo.mask]; \
+			smp_wmb(); \
+			__kfifo->out++; \
+		} \
+	} \
+	__ret; \
+}) \
+)
+
+/**
+ * kfifo_peek - get data from the fifo without removing
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This reads the data from the fifo without removing it from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_peek(fifo, val) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) \
+		__val = (typeof(__tmp->ptr))NULL; \
+	if (__recsize) \
+		__ret = __kfifo_out_peek_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_empty(__tmp); \
+		if (__ret) { \
+			*(typeof(__tmp->type))__val = \
+				(__is_kfifo_ptr(__tmp) ? \
+				((typeof(__tmp->type))__kfifo->data) : \
+				(__tmp->buf) \
+				)[__kfifo->out & __tmp->kfifo.mask]; \
+			smp_wmb(); \
+		} \
+	} \
+	__ret; \
+}) \
+)
+
+/**
+ * kfifo_in - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ *
+ * This macro copies the given buffer into the fifo and returns the
+ * number of copied elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_in(fifo, buf, n) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+		__dummy = (typeof(__buf))NULL; \
+	} \
+	(__recsize) ?\
+	__kfifo_in_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_in(__kfifo, __buf, __n); \
+})
+
+/**
+ * kfifo_in_spinlocked - put data into the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro copies the given values buffer into the fifo and returns the
+ * number of copied elements.
+ */
+#define	kfifo_in_spinlocked(fifo, buf, n, lock) \
+({ \
+	unsigned long __flags; \
+	unsigned int __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_in(fifo, buf, n); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+})
+
+/* alias for kfifo_in_spinlocked, will be removed in a future release */
+#define kfifo_in_locked(fifo, buf, n, lock) \
+		kfifo_in_spinlocked(fifo, buf, n, lock)
+
+/**
+ * kfifo_out - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ *
+ * This macro get some data from the fifo and return the numbers of elements
+ * copied.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_out(fifo, buf, n) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr) __dummy = NULL; \
+		__buf = __dummy; \
+	} \
+	(__recsize) ?\
+	__kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_out(__kfifo, __buf, __n); \
+}) \
+)
+
+/**
+ * kfifo_out_spinlocked - get data from the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied.
+ */
+#define	kfifo_out_spinlocked(fifo, buf, n, lock) \
+__kfifo_uint_must_check_helper( \
+({ \
+	unsigned long __flags; \
+	unsigned int __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_out(fifo, buf, n); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+}) \
+)
+
+/* alias for kfifo_out_spinlocked, will be removed in a future release */
+#define kfifo_out_locked(fifo, buf, n, lock) \
+		kfifo_out_spinlocked(fifo, buf, n, lock)
+
+/**
+ * kfifo_from_user - puts some data from user space into the fifo
+ * @fifo: address of the fifo to be used
+ * @from: pointer to the data to be added
+ * @len: the length of the data to be added
+ * @copied: pointer to output variable to store the number of copied bytes
+ *
+ * This macro copies at most @len bytes from the @from into the
+ * fifo, depending of the available space and returns -EFAULT/0.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_from_user(fifo, from, len, copied) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const void __user *__from = (from); \
+	unsigned int __len = (len); \
+	unsigned int *__copied = (copied); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_from_user_r(__kfifo, __from, __len,  __copied, __recsize) : \
+	__kfifo_from_user(__kfifo, __from, __len, __copied); \
+}) \
+)
+
+/**
+ * kfifo_to_user - copies data from the fifo into user space
+ * @fifo: address of the fifo to be used
+ * @to: where the data must be copied
+ * @len: the size of the destination buffer
+ * @copied: pointer to output variable to store the number of copied bytes
+ *
+ * This macro copies at most @len bytes from the fifo into the
+ * @to buffer and returns -EFAULT/0.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_to_user(fifo, to, len, copied) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	void __user *__to = (to); \
+	unsigned int __len = (len); \
+	unsigned int *__copied = (copied); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_to_user_r(__kfifo, __to, __len, __copied, __recsize) : \
+	__kfifo_to_user(__kfifo, __to, __len, __copied); \
+}) \
+)
+
+/**
+ * kfifo_dma_in_prepare - setup a scatterlist for DMA input
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA input.
+ * It returns the number entries in the scatterlist array.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define	kfifo_dma_in_prepare(fifo, sgl, nents, len) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct scatterlist *__sgl = (sgl); \
+	int __nents = (nents); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_dma_in_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+	__kfifo_dma_in_prepare(__kfifo, __sgl, __nents, __len); \
+})
+
+/**
+ * kfifo_dma_in_finish - finish a DMA IN operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes to received
+ *
+ * This macro finish a DMA IN operation. The in counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_in_finish(fifo, len) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_dma_in_finish_r(__kfifo, __len, __recsize); \
+	else \
+		__kfifo->in += __len / sizeof(*__tmp->type); \
+})
+
+/**
+ * kfifo_dma_out_prepare - setup a scatterlist for DMA output
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA output which at most @len bytes
+ * to transfer.
+ * It returns the number entries in the scatterlist array.
+ * A zero means there is no space available and the scatterlist is not filled.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define	kfifo_dma_out_prepare(fifo, sgl, nents, len) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo);  \
+	struct scatterlist *__sgl = (sgl); \
+	int __nents = (nents); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_dma_out_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+	__kfifo_dma_out_prepare(__kfifo, __sgl, __nents, __len); \
+})
+
+/**
+ * kfifo_dma_out_finish - finish a DMA OUT operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes transferd
+ *
+ * This macro finish a DMA OUT operation. The out counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_out_finish(fifo, len) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_dma_out_finish_r(__kfifo, __recsize); \
+	else \
+		__kfifo->out += __len / sizeof(*__tmp->type); \
+})
+
+/**
+ * kfifo_out_peek - gets some data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ *
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied. The data is not removed from the fifo.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_out_peek(fifo, buf, n) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr) __dummy __attribute__ ((unused)) = NULL; \
+		__buf = __dummy; \
+	} \
+	(__recsize) ? \
+	__kfifo_out_peek_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_out_peek(__kfifo, __buf, __n); \
+}) \
+)
+
+extern int __kfifo_alloc(struct __kfifo *fifo, unsigned int size,
+	size_t esize, gfp_t gfp_mask);
+
+extern void __kfifo_free(struct __kfifo *fifo);
+
+extern int __kfifo_init(struct __kfifo *fifo, void *buffer,
+	unsigned int size, size_t esize);
+
+extern unsigned int __kfifo_in(struct __kfifo *fifo,
+	const void *buf, unsigned int len);
+
+extern unsigned int __kfifo_out(struct __kfifo *fifo,
+	void *buf, unsigned int len);
+
+extern int __kfifo_from_user(struct __kfifo *fifo,
+	const void __user *from, unsigned long len, unsigned int *copied);
+
+extern int __kfifo_to_user(struct __kfifo *fifo,
+	void __user *to, unsigned long len, unsigned int *copied);
+
+extern unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len);
+
+extern unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len);
+
+extern unsigned int __kfifo_out_peek(struct __kfifo *fifo,
+	void *buf, unsigned int len);
+
+extern unsigned int __kfifo_in_r(struct __kfifo *fifo,
+	const void *buf, unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_out_r(struct __kfifo *fifo,
+	void *buf, unsigned int len, size_t recsize);
+
+extern int __kfifo_from_user_r(struct __kfifo *fifo,
+	const void __user *from, unsigned long len, unsigned int *copied,
+	size_t recsize);
+
+extern int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to,
+	unsigned long len, unsigned int *copied, size_t recsize);
+
+extern unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
+
+extern void __kfifo_dma_in_finish_r(struct __kfifo *fifo,
+	unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
+
+extern void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize);
+
+extern unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize);
+
+extern void __kfifo_skip_r(struct __kfifo *fifo, size_t recsize);
+
+extern unsigned int __kfifo_out_peek_r(struct __kfifo *fifo,
+	void *buf, unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_max_r(unsigned int len, size_t recsize);
+
+#endif
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) */
diff --git a/include/compat/linux/math64.h b/include/compat/linux/math64.h
new file mode 100755
index 0000000..eb9e8e1
--- /dev/null
+++ b/include/compat/linux/math64.h
@@ -0,0 +1,10 @@
+#ifndef _COMPAT_LINUX_MATH64_H
+#define _COMPAT_LINUX_MATH64_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25))
+#include_next <linux/math64.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */
+
+#endif	/* _COMPAT_LINUX_MATH64_H */
diff --git a/include/compat/linux/nl80211.h b/include/compat/linux/nl80211.h
new file mode 100755
index 0000000..c1ba388
--- /dev/null
+++ b/include/compat/linux/nl80211.h
@@ -0,0 +1,2932 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * TODO: need more info?
+ */
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ *       these registrations are ignored until the interface type is
+ *       changed again. This means that changing the interface type can
+ *       lead to a situation that couldn't otherwise be produced, but
+ *       any such registrations will be dormant in the sense that they
+ *       will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ *	to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	instead, the support here is for backward compatibility only.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ *	on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ *	be sent from userspace to request creation of a new virtual interface,
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ *	%NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ *	userspace to request deletion of a virtual interface, then requires
+ *	attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ *	or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
+ *	%NL80222_CMD_NEW_BEACON message)
+ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
+ *	using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
+ *	%NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
+ *	Following attributes are provided for drivers that generate full Beacon
+ *	and Probe Response frames internally: %NL80211_ATTR_SSID,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
+ *	%NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
+ *	parameters are like for %NL80211_CMD_SET_BEACON.
+ * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all stations, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all mesh paths, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ *	regulatory domain.
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ *	after being queried by the kernel. CRDA replies by sending a regulatory
+ *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ *	current alpha2 if it found a match. It also provides
+ *	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ *	regulatory rule is a nested set of attributes  given by
+ *	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ *	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ *	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ *	store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ *	interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *	Note: This command has been removed and it is only reserved at this
+ *	point to avoid re-using existing command number. The functionality this
+ *	command was planned for has been provided with cleaner design with the
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	probe requests at CCK rate or not.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
+ *	if scheduled scan is not running.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ *	has been changed and provides details of the request information
+ *	that caused the change such as who initiated the regulatory request
+ *	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ *	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ *	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ *	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ *	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ *	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ *	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ *	has been found while world roaming thus enabling active scan or
+ *	any mode of operation that initiates TX (beacons) on a channel
+ *	where we would not have been able to do either before. As an example
+ *	if you are world roaming (regulatory domain set to world or if your
+ *	driver is using a custom world roaming regulatory domain) and while
+ *	doing a passive scan on the 5 GHz band you find an AP there (if not
+ *	on a DFS channel) you will now be able to actively scan for that AP
+ *	or use AP mode on your card on that same channel. Note that this will
+ *	never be used for channels 1-11 on the 2 GHz band as they are always
+ *	enabled world wide. This beacon hint is only sent if your device had
+ *	either disabled active scanning or beaconing on a channel. We send to
+ *	userspace the wiphy on which we removed a restriction from
+ *	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *	the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ *	This command is used both as a command (request to authenticate) and
+ *	as an event on the "mlme" multicast group indicating completion of the
+ *	authentication process.
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ *	the SSID (mainly for association, but is included in authentication
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	to be added to the frame.
+ *	When used as an event, this reports reception of an Authentication
+ *	frame in station and IBSS modes when the local MLME processed the
+ *	frame, i.e., it was for the local STA and was received in correct
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ *	primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ *	to identify the device, and the TESTDATA blob attribute to pass through
+ *	to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ *	requests to connect to a specified network but without separating
+ *	auth and assoc steps. For this, you need to specify the SSID in a
+ *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ *	It is also sent as an event, with the BSSID and response IEs when the
+ *	connection is established or failed to be established. This can be
+ *	determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ *	sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ *	userspace that a connection was dropped by the AP or due to other
+ *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ *	%NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ *	associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ *	channel for the specified amount of time. This can be used to do
+ *	off-channel operations like transmit a Public Action frame and wait for
+ *	a response while being associated to an AP on another channel.
+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ *	optionally used to specify additional channel parameters.
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ *	to remain on the channel. This command is also used as an event to
+ *	notify when the requested duration starts (it may take a while for the
+ *	driver to schedule this time due to other concurrent needs for the
+ *	radio).
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ *	that will be included with any events pertaining to this request;
+ *	the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ *	pending remain-on-channel duration if the desired operation has been
+ *	completed prior to expiration of the originally requested duration.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ *	uniquely identify the request.
+ *	This command is also used as an event to notify when a requested
+ *	remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
+ *	requires an interface index, a frame type attribute (optional for
+ *	backward compatibility reasons, if not given assumes action frames)
+ *	and a match attribute containing the first few bytes of the frame
+ *	that should match, e.g. a single byte for only a category match or
+ *	four bytes for vendor frames including the OUI. The registration
+ *	cannot be dropped, but is removed automatically when the netlink
+ *	socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ *	backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ *	command is used both as a request to transmit a management frame and
+ *	as an event indicating reception of a frame that was not processed in
+ *	kernel code, but is for us (i.e., which may need to be processed in a
+ *	user space application). %NL80211_ATTR_FRAME is used to specify the
+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
+ *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
+ *	which channel the frame is to be transmitted or was received. If this
+ *	channel is not the current channel (remain-on-channel or the
+ *	operational channel) the device will switch to the given channel and
+ *	transmit the frame, optionally waiting for a response for the time
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ *	TX status event pertaining to the TX request.
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	management frames at CCK rate or not in 2GHz band.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ *	command may be used with the corresponding cookie to cancel the wait
+ *	time if it is known that it is no longer necessary.
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
+ *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
+ *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
+ *	the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ *	backward compatibility.
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ *	is used to configure connection quality monitoring notification trigger
+ *	levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ *	command is used as an event to indicate the that a trigger level was
+ *	reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ *	by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	In case multiple channels are supported by the device, the mechanism
+ *	with which it switches channels is implementation-defined.
+ *	When a monitor interface is given, it can only switch channel while
+ *	no other interfaces are operating to avoid disturbing the operation
+ *	of any other interfaces, and other interfaces will again take
+ *	precedence when they are used.
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ *	mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ *	notification. This event is used to indicate that an unprotected
+ *	deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ *	notification. This event is used to indicate that an unprotected
+ *	disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
+ *      reception of this notification, userspace may decide to create a new
+ *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ *	the necessary information for supporting GTK rekey offload. This
+ *	feature is typically used during WoWLAN. The configuration data
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ *	contains the data in sub-attributes). After rekeying happened,
+ *	this command may also be sent by the driver as an MLME event to
+ *	inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ *	of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *	implement sending deauth to stations that send unexpected class 3
+ *	frames. Also used as the event sent by the kernel when such a frame
+ *	is received.
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *	other attributes like the interface index are present.
+ *	If used as the command it must have an interface index and you can
+ *	only unsubscribe from the event by closing the socket. Subscription
+ *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *	by sending a null data frame to it and reporting when the frame is
+ *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *	up the event with the request. The event includes the same data and
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *	other BSSes when any interfaces are in AP mode. This helps implement
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *	messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_BTCOEX_INQ: This command is used to provide WiFi driver the
+ *	Bluetooth inquiry status. The status will be available in flag
+ *	%NL80211_ATTR_BTCOEX_INQ_STATUS. This information can be used to
+ *	manage shared resources when the wireless device is a Bluetooth-Wifi
+ *	coex solution.
+ *
+ * @NL80211_CMD_BTCOEX_SCO: This command is used to give the driver the
+ *	Bluetooth SCO connection status. The SCO status is available in
+ *	%NL80211_ATTR_BTCOEX_SCO_STATUS flag. It also provide
+ *	%NL80211_ATTR_BTCOEX_TYPE_ESCO to specify if the connection is ESCO.
+ *	It also has %NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL specifing the time
+ *	between consecutive eSCO instance(Invalid for SCO).
+ *	%NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN spedicying the the length in
+ *	bytes of the eSCO payload in transmit direction.This feature
+ *	useful for a Bluetooth-Wifi coex solution.
+ *
+ * @NL80211_CMD_BTCOEX_A2DP: This command is used to give the driver the
+ *	Bluetooth A2DP profile connection status. The A2DP profile connection
+ *	status is available in %NL80211_ATTR_BTCOEX_A2DP_STATUS flag.
+ *	This feature is typically used when the wireless device is a
+ *	Bluetooth-Wifi coex solution.
+ *
+ * @NL80211_CMD_BTCOEX_ACL_INFO: This command is used to let the wifi driver
+ *	know information regarding the ACL link. Currently supported
+ *	information includes The role as %NL80211_ATTR_BTCOEX_ACL_ROLE,
+ *	%NL80211_ATTR_BTCOEX_REMOTE_LMP_VER showing the LMP version of the
+ *	remote device. This feature is useful when the wireless device is a
+ *	Bluetooth-Wifi coex solution.
+ *
+ * @NL80211_CMD_BTCOEX_ANTENNA_CONFIG: This command is used to let the wifi
+ *	driver know information regarding the antenna configuration used
+ *	in case of a BT-coex solution. This information is provide as
+ *	%NL80211_ATTR_BTCOEX_ANTENNA_CONFIG.This feature is useful when
+ *	the wireless device is a Bluetooth-Wifi coex solution.
+ *
+ * @NL80211_CMD_BTCOEX_BT_VENDOR: This command is used to let the wifi
+ *	driver know the Bluetooth chip vendor. This would let it use
+ *	different configuration in case of different BT chip vendor
+ *	is used in BT-Coex scenario. This information is provided as
+ *	%NL80211_ATTR_BT_VENDOR_ID.This feature is useful when
+ *	the wireless device is a Bluetooth-Wifi coex solution.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_CMD_UNSPEC,
+
+	NL80211_CMD_GET_WIPHY,		/* can dump */
+	NL80211_CMD_SET_WIPHY,
+	NL80211_CMD_NEW_WIPHY,
+	NL80211_CMD_DEL_WIPHY,
+
+	NL80211_CMD_GET_INTERFACE,	/* can dump */
+	NL80211_CMD_SET_INTERFACE,
+	NL80211_CMD_NEW_INTERFACE,
+	NL80211_CMD_DEL_INTERFACE,
+
+	NL80211_CMD_GET_KEY,
+	NL80211_CMD_SET_KEY,
+	NL80211_CMD_NEW_KEY,
+	NL80211_CMD_DEL_KEY,
+
+	NL80211_CMD_GET_BEACON,
+	NL80211_CMD_SET_BEACON,
+	NL80211_CMD_NEW_BEACON,
+	NL80211_CMD_DEL_BEACON,
+
+	NL80211_CMD_GET_STATION,
+	NL80211_CMD_SET_STATION,
+	NL80211_CMD_NEW_STATION,
+	NL80211_CMD_DEL_STATION,
+
+	NL80211_CMD_GET_MPATH,
+	NL80211_CMD_SET_MPATH,
+	NL80211_CMD_NEW_MPATH,
+	NL80211_CMD_DEL_MPATH,
+
+	NL80211_CMD_SET_BSS,
+
+	NL80211_CMD_SET_REG,
+	NL80211_CMD_REQ_SET_REG,
+
+	NL80211_CMD_GET_MESH_CONFIG,
+	NL80211_CMD_SET_MESH_CONFIG,
+
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
+	NL80211_CMD_AUTHENTICATE,
+	NL80211_CMD_ASSOCIATE,
+	NL80211_CMD_DEAUTHENTICATE,
+	NL80211_CMD_DISASSOCIATE,
+
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
+	NL80211_CMD_TESTMODE,
+
+	NL80211_CMD_CONNECT,
+	NL80211_CMD_ROAM,
+	NL80211_CMD_DISCONNECT,
+
+	NL80211_CMD_SET_WIPHY_NETNS,
+
+	NL80211_CMD_GET_SURVEY,
+	NL80211_CMD_NEW_SURVEY_RESULTS,
+
+	NL80211_CMD_SET_PMKSA,
+	NL80211_CMD_DEL_PMKSA,
+	NL80211_CMD_FLUSH_PMKSA,
+
+	NL80211_CMD_REMAIN_ON_CHANNEL,
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+	NL80211_CMD_SET_TX_BITRATE_MASK,
+
+	NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_FRAME,
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+	NL80211_CMD_FRAME_TX_STATUS,
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
+
+	NL80211_CMD_SET_POWER_SAVE,
+	NL80211_CMD_GET_POWER_SAVE,
+
+	NL80211_CMD_SET_CQM,
+	NL80211_CMD_NOTIFY_CQM,
+
+	NL80211_CMD_SET_CHANNEL,
+	NL80211_CMD_SET_WDS_PEER,
+
+	NL80211_CMD_FRAME_WAIT_CANCEL,
+
+	NL80211_CMD_JOIN_MESH,
+	NL80211_CMD_LEAVE_MESH,
+
+	NL80211_CMD_UNPROT_DEAUTHENTICATE,
+	NL80211_CMD_UNPROT_DISASSOCIATE,
+
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
+	NL80211_CMD_SET_REKEY_OFFLOAD,
+
+	NL80211_CMD_PMKSA_CANDIDATE,
+
+	NL80211_CMD_TDLS_OPER,
+	NL80211_CMD_TDLS_MGMT,
+
+	NL80211_CMD_UNEXPECTED_FRAME,
+
+	NL80211_CMD_PROBE_CLIENT,
+
+	NL80211_CMD_REGISTER_BEACONS,
+
+	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+	NL80211_CMD_SET_NOACK_MAP,
+
+	NL80211_CMD_PRIV,
+
+	NL80211_CMD_P2P_FLUSH,
+
+	NL80211_CMD_BTCOEX_INQ,
+	NL80211_CMD_BTCOEX_SCO,
+	NL80211_CMD_BTCOEX_A2DP,
+	NL80211_CMD_BTCOEX_ACL_INFO,
+	NL80211_CMD_BTCOEX_ANTENNA_CONFIG,
+	NL80211_CMD_BTCOEX_BT_VENDOR,
+	NL80211_CMD_BTCOEX,
+
+	/* add new commands above here */
+
+	/* used to define NL80211_CMD_MAX below */
+	__NL80211_CMD_AFTER_LAST,
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ *	/sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *		this attribute)
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ *	section 7.3.2.9; dot11CoverageClass; u8
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ *	IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ *	to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ *	given for %NL80211_CMD_GET_STATION, nested attribute containing
+ *	info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ *	consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ *	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	&enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *      &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ *	current regulatory domain should be set to or is already set to.
+ *	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ *	to query the CRDA to retrieve one regulatory domain. This attribute can
+ *	also be used by userspace to query the kernel for the currently set
+ *	regulatory domain. We chose an alpha2 as that is also used by the
+ *	IEEE-802.11d country information element to identify a country.
+ *	Users can also simply ask the wireless core to set regulatory domain
+ *	to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ *	rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ *	supported interface types, each a flag attribute with the number
+ *	of the interface mode.
+ *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ *	scan with a single scheduled scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ *	elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ *	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ *	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ *	an array of command numbers (i.e. a mapping index to command number)
+ *	that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ *	NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ *	represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ *	%NL80211_CMD_DISASSOCIATE, u16
+ *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _before_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _after_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ *	ethertype that will be used for key negotiation. It can be
+ *	specified with the associate and connect commands. If it is not
+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
+ *	attribute is also used as a flag in the wiphy information to
+ *	indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ *	ethertype frames used for key negotiation must not be encrypted.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ *	We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ *	event was due to the AP disconnecting the station, and not due to
+ *	a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ *	event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ *	that protected APs should be used. This is also used with NEW_BEACON to
+ *	indicate that the BSS is to use protection.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ *	to indicate which unicast key ciphers will be used with the connection
+ *	(an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which group key cipher will be used with the connection (a
+ *	u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which WPA version(s) the AP we want to associate with is using
+ *	(a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ *	sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ *	sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ *	commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ *	%NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ *	and join_ibss(), key information is in a nested attribute each
+ *	with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ *	dumps. This number increases whenever the object list being
+ *	dumped changes, and as such userspace can verify that it has
+ *	obtained a complete and consistent snapshot by verifying that
+ *	all dump messages contain the same generation number. If it
+ *	changed then the list changed and the dump should be repeated
+ *	completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *	cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ *	specifies the maximum duration that can be requested with the
+ *	remain-on-channel operation, in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ *	enum nl80211_band value is used as the index (nla_type() of the nested
+ *	data. If a band is not included, it will be configured to allow all
+ *	rates based on negotiated supported rates information. This attribute
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ *	@NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be transmitted with
+ *	%NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be registered for RX.
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ *	acknowledged by the recipient.
+ *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ *	is requesting a local authentication/association state change without
+ *	invoking actual management frame exchange. This can be used with
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ *	NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ *	connected to this BSS.
+ *
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ *      &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ *      for non-automatic settings.
+ *
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ *	means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ *	for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ *	for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ *	transmitted on another channel when the channel given doesn't match
+ *	the current channel. If the current channel doesn't match and this
+ *	flag isn't set, the frame will be rejected. This is also used as an
+ *	nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ *	defined in &enum nl80211_plink_state. Used when userspace is
+ *	driving the peer link management state machine.
+ *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *	capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ *	sets of attributes to match during scheduled scans.  Only BSSs
+ *	that match any of the sets will be reported.  These are
+ *	pass-thru filter rules.
+ *	For a match to succeed, the BSS must match all attributes of a
+ *	set.  Since not every hardware supports matching all types of
+ *	attributes, there is no guarantee that the reported BSSs are
+ *	fully complying with the match sets and userspace needs to be
+ *	able to ignore them by itself.
+ *	Thus, the implementation is somewhat hardware-dependent, but
+ *	this is only an optimization and the userspace application
+ *	needs to handle all the non-filtered results anyway.
+ *	If the match attributes don't make sense when combined with
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ *	is included in the probe request, but the match attributes
+ *	will never let it go through), -EINVAL may be returned.
+ *	If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
+ * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *	nested array attribute containing an entry for each band, with the entry
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *	and Probe Response (when response to wildcard Probe Request); see
+ *	&enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *	driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *	(Re)Association Response frames when the driver (or firmware) replies to
+ *	(Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ *	for management frames transmission. In order to avoid p2p probe/action
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space
+ *	applications use this attribute.
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ *	%NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ *	request, link setup confirm, link teardown, etc.). Values are
+ *	described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ *	TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ *	&enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ *	as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ *	procedures should be performed by sending TDLS packets via
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *	that have AP support to indicate that they have the AP SME integrated
+ *	with support for the features listed in this attribute, see
+ *	&enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ *	the driver to not wait for an acknowledgement. Note that due to this,
+ *	it will also not give a status callback nor return a cookie. This is
+ *	mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ *	&enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ *	requests while operating in AP-mode.
+ *	This attribute holds a bitmap of the supported protocols for
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *	to be filled by the FW.
+ *
+ * @%NL80211_ATTR_BTCOEX_INQ_STATUS: A flag indicating if Bluetooth inquiry
+ *	is in progress. this flag is useful for resource management in a
+ *	bluetooth wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_SCO_STATUS: A flag indicating if Bluetooth SCO audio
+ *	connection is active. this flag is useful for resource management in a
+ *	bluetooth wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_TYPE_ESCO: A flag indicating if the audio connection
+ *	is of type ESCO. If this attribute is available, the audio connection
+ *	is of type ESCO. this information is useful for resource management
+ *	in a bluetooth wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL: Provides the time between two
+ *	consecutive eSCO instant, measured in slots.This attribute will be
+ *	available only in case of an eSCO connection.
+ *	this information is useful for resource management in a bluetooth
+ *	wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN: Provides the length in bytes of the
+ *	eSCO payload in the receive direction. This attribute will be available
+ *	in case of an eSCO connection.
+ *	this information is useful for resource management in a bluetooth
+ *	wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_A2DP_STATUS: A flag indicating the Bluetooth
+ *	A2DP connection status. This flag is useful for resource management
+ *	in a bluetooth wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_ACL_ROLE: Indicates if Bluetooth chip's role
+ *	in an ACL connection. See &enum nl80211_btcoex_acl_role for possible
+ *	value. This flag is useful for resource management in a bluetooth
+ *	wifi combo solution.
+ *
+ * @%NL80211_ATTR_BTCOEX_REMOTE_LMP_VER: Indicates the remote device LMP version
+ *	in an ACL connection. See Link manager version parameter in Bluetooth
+ *	assigned numbers for possible value. This values is useful for resource
+ *	management in a bluetooth wifi combo solution.
+ * @%NL80211_ATTR_BTCOEX_ANTENNA_CONFIG: Indicates the Bluetooth wifi chip
+ *	configuration. See &enum nl80211_btcoex_antenna_config for possible
+ *	value. This flag is useful for resource management in a bluetooth
+ *	wifi combo solution.
+ * @%NL80211_ATTR_BT_VENDOR_ID: Indicates the Bluetooth chip
+ *	vendor name. See &enum nl80211_btcoex_vendor_list for possible
+ *	value. This flag is useful for resource management in a bluetooth
+ *	wifi combo solution.
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_ATTR_UNSPEC,
+
+	NL80211_ATTR_WIPHY,
+	NL80211_ATTR_WIPHY_NAME,
+
+	NL80211_ATTR_IFINDEX,
+	NL80211_ATTR_IFNAME,
+	NL80211_ATTR_IFTYPE,
+
+	NL80211_ATTR_MAC,
+
+	NL80211_ATTR_KEY_DATA,
+	NL80211_ATTR_KEY_IDX,
+	NL80211_ATTR_KEY_CIPHER,
+	NL80211_ATTR_KEY_SEQ,
+	NL80211_ATTR_KEY_DEFAULT,
+
+	NL80211_ATTR_BEACON_INTERVAL,
+	NL80211_ATTR_DTIM_PERIOD,
+	NL80211_ATTR_BEACON_HEAD,
+	NL80211_ATTR_BEACON_TAIL,
+
+	NL80211_ATTR_STA_AID,
+	NL80211_ATTR_STA_FLAGS,
+	NL80211_ATTR_STA_LISTEN_INTERVAL,
+	NL80211_ATTR_STA_SUPPORTED_RATES,
+	NL80211_ATTR_STA_VLAN,
+	NL80211_ATTR_STA_INFO,
+
+	NL80211_ATTR_WIPHY_BANDS,
+
+	NL80211_ATTR_MNTR_FLAGS,
+
+	NL80211_ATTR_MESH_ID,
+	NL80211_ATTR_STA_PLINK_ACTION,
+	NL80211_ATTR_MPATH_NEXT_HOP,
+	NL80211_ATTR_MPATH_INFO,
+
+	NL80211_ATTR_BSS_CTS_PROT,
+	NL80211_ATTR_BSS_SHORT_PREAMBLE,
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+	NL80211_ATTR_HT_CAPABILITY,
+
+	NL80211_ATTR_SUPPORTED_IFTYPES,
+
+	NL80211_ATTR_REG_ALPHA2,
+	NL80211_ATTR_REG_RULES,
+
+	NL80211_ATTR_MESH_CONFIG,
+
+	NL80211_ATTR_BSS_BASIC_RATES,
+
+	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+	NL80211_ATTR_WIPHY_FREQ,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
+	NL80211_ATTR_SUPPORTED_COMMANDS,
+
+	NL80211_ATTR_FRAME,
+	NL80211_ATTR_SSID,
+	NL80211_ATTR_AUTH_TYPE,
+	NL80211_ATTR_REASON_CODE,
+
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
+	NL80211_ATTR_TESTDATA,
+
+	NL80211_ATTR_PRIVACY,
+
+	NL80211_ATTR_DISCONNECTED_BY_AP,
+	NL80211_ATTR_STATUS_CODE,
+
+	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+	NL80211_ATTR_CIPHER_SUITE_GROUP,
+	NL80211_ATTR_WPA_VERSIONS,
+	NL80211_ATTR_AKM_SUITES,
+
+	NL80211_ATTR_REQ_IE,
+	NL80211_ATTR_RESP_IE,
+
+	NL80211_ATTR_PREV_BSSID,
+
+	NL80211_ATTR_KEY,
+	NL80211_ATTR_KEYS,
+
+	NL80211_ATTR_PID,
+
+	NL80211_ATTR_4ADDR,
+
+	NL80211_ATTR_SURVEY_INFO,
+
+	NL80211_ATTR_PMKID,
+	NL80211_ATTR_MAX_NUM_PMKIDS,
+
+	NL80211_ATTR_DURATION,
+
+	NL80211_ATTR_COOKIE,
+
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+	NL80211_ATTR_TX_RATES,
+
+	NL80211_ATTR_FRAME_MATCH,
+
+	NL80211_ATTR_ACK,
+
+	NL80211_ATTR_PS_STATE,
+
+	NL80211_ATTR_CQM,
+
+	NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+	NL80211_ATTR_AP_ISOLATE,
+
+	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
+	NL80211_ATTR_TX_FRAME_TYPES,
+	NL80211_ATTR_RX_FRAME_TYPES,
+	NL80211_ATTR_FRAME_TYPE,
+
+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+	NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
+	NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+	NL80211_ATTR_BSS_HT_OPMODE,
+
+	NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+	NL80211_ATTR_MESH_SETUP,
+
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
+
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
+	NL80211_ATTR_REKEY_DATA,
+
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+	NL80211_ATTR_SCAN_SUPP_RATES,
+
+	NL80211_ATTR_HIDDEN_SSID,
+
+	NL80211_ATTR_IE_PROBE_RESP,
+	NL80211_ATTR_IE_ASSOC_RESP,
+
+	NL80211_ATTR_STA_WME,
+	NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+	NL80211_ATTR_ROAM_SUPPORT,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH,
+	NL80211_ATTR_MAX_MATCH_SETS,
+
+	NL80211_ATTR_PMKSA_CANDIDATE,
+
+	NL80211_ATTR_TX_NO_CCK_RATE,
+
+	NL80211_ATTR_TDLS_ACTION,
+	NL80211_ATTR_TDLS_DIALOG_TOKEN,
+	NL80211_ATTR_TDLS_OPERATION,
+	NL80211_ATTR_TDLS_SUPPORT,
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+	NL80211_ATTR_DEVICE_AP_SME,
+
+	NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+	NL80211_ATTR_FEATURE_FLAGS,
+
+	NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+	NL80211_ATTR_PROBE_RESP,
+
+	NL80211_ATTR_DFS_REGION,
+
+	NL80211_ATTR_DISABLE_HT,
+	NL80211_ATTR_HT_CAPABILITY_MASK,
+
+	NL80211_ATTR_NOACK_MAP,
+
+	NL80211_ATTR_PRIV_CMD,
+
+	NL80211_ATTR_BTCOEX_INQ_STATUS,
+	NL80211_ATTR_BTCOEX_SCO_STATUS,
+	NL80211_ATTR_BTCOEX_TYPE_ESCO,
+	NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL,
+	NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN,
+	NL80211_ATTR_BTCOEX_A2DP_STATUS,
+	NL80211_ATTR_BTCOEX_ACL_ROLE,
+	NL80211_ATTR_BTCOEX_REMOTE_LMP_VER,
+	NL80211_ATTR_BTCOEX_ANTENNA_CONFIG,
+	NL80211_ATTR_BT_VENDOR_ID,
+	NL80211_ATTR_BTCOEX_DATA,
+
+	/* add attributes here, update the policy in nl80211.c */
+
+	__NL80211_ATTR_AFTER_LAST,
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+#define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_REG_RULES		32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+#define NL80211_HT_CAPABILITY_LEN		26
+
+#define NL80211_MAX_NR_CIPHER_SUITES		5
+#define NL80211_MAX_NR_AKM_SUITES		2
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @NUM_NL80211_IFTYPES: number of defined interface types
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+	NL80211_IFTYPE_UNSPECIFIED,
+	NL80211_IFTYPE_ADHOC,
+	NL80211_IFTYPE_STATION,
+	NL80211_IFTYPE_AP,
+	NL80211_IFTYPE_AP_VLAN,
+	NL80211_IFTYPE_WDS,
+	NL80211_IFTYPE_MONITOR,
+	NL80211_IFTYPE_MESH_POINT,
+	NL80211_IFTYPE_P2P_CLIENT,
+	NL80211_IFTYPE_P2P_GO,
+
+	/* keep last */
+	NUM_NL80211_IFTYPES,
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ *	with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+enum nl80211_sta_flags {
+	__NL80211_STA_FLAG_INVALID,
+	NL80211_STA_FLAG_AUTHORIZED,
+	NL80211_STA_FLAG_SHORT_PREAMBLE,
+	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
+	NL80211_STA_FLAG_TDLS_PEER,
+
+	/* keep last */
+	__NL80211_STA_FLAG_AFTER_LAST,
+	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+	__NL80211_STA_BSS_PARAM_INVALID,
+	NL80211_STA_BSS_PARAM_CTS_PROT,
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+	/* keep last */
+	__NL80211_STA_BSS_PARAM_AFTER_LAST,
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ *	containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ *	station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ *	attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+	__NL80211_STA_INFO_INVALID,
+	NL80211_STA_INFO_INACTIVE_TIME,
+	NL80211_STA_INFO_RX_BYTES,
+	NL80211_STA_INFO_TX_BYTES,
+	NL80211_STA_INFO_LLID,
+	NL80211_STA_INFO_PLID,
+	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,
+	NL80211_STA_INFO_TX_RETRIES,
+	NL80211_STA_INFO_TX_FAILED,
+	NL80211_STA_INFO_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_BITRATE,
+	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
+	NL80211_STA_INFO_STA_FLAGS,
+
+	/* keep last */
+	__NL80211_STA_INFO_AFTER_LAST,
+	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
+	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_FIXED =	1<<3,
+	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+ *	&enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ *	currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_mpath_info {
+	__NL80211_MPATH_INFO_INVALID,
+	NL80211_MPATH_INFO_FRAME_QLEN,
+	NL80211_MPATH_INFO_SN,
+	NL80211_MPATH_INFO_METRIC,
+	NL80211_MPATH_INFO_EXPTIME,
+	NL80211_MPATH_INFO_FLAGS,
+	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+	/* keep last */
+	__NL80211_MPATH_INFO_AFTER_LAST,
+	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ *	an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ *	an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ *	defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_attr {
+	__NL80211_BAND_ATTR_INVALID,
+	NL80211_BAND_ATTR_FREQS,
+	NL80211_BAND_ATTR_RATES,
+
+	NL80211_BAND_ATTR_HT_MCS_SET,
+	NL80211_BAND_ATTR_HT_CAPA,
+	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+	/* keep last */
+	__NL80211_BAND_ATTR_AFTER_LAST,
+	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ *	regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ *	permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ *	currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_frequency_attr {
+	__NL80211_FREQUENCY_ATTR_INVALID,
+	NL80211_FREQUENCY_ATTR_FREQ,
+	NL80211_FREQUENCY_ATTR_DISABLED,
+	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+	NL80211_FREQUENCY_ATTR_NO_IBSS,
+	NL80211_FREQUENCY_ATTR_RADAR,
+	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+
+	/* keep last */
+	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
+	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ *	in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ *	currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_bitrate_attr {
+	__NL80211_BITRATE_ATTR_INVALID,
+	NL80211_BITRATE_ATTR_RATE,
+	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+	/* keep last */
+	__NL80211_BITRATE_ATTR_AFTER_LAST,
+	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ *	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ *	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ *	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ *	802.11 country information element with regulatory information it
+ *	thinks we should consider. cfg80211 only processes the country
+ *	code from the IE, and relies on the regulatory domain information
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
+ *	If a channel is enabled but the country code indicates it should
+ *	be disabled we disable the channel and re-enable it upon disassociation.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ *	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ *	driver specific world regulatory domain. These do not apply system-wide
+ *	and are only applicable to the individual devices which have requested
+ *	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ *	considerations for a given frequency range. These are the
+ *	&enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ *	rule in KHz. This is not a center of frequency but an actual regulatory
+ *	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ *	in KHz. This is not a center a frequency but an actual regulatory
+ *	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ *	frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ *	for a given frequency range. The value is in mBi (100 * dBi).
+ *	If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ *	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ *	currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_reg_rule_attr {
+	__NL80211_REG_RULE_ATTR_INVALID,
+	NL80211_ATTR_REG_RULE_FLAGS,
+
+	NL80211_ATTR_FREQ_RANGE_START,
+	NL80211_ATTR_FREQ_RANGE_END,
+	NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+	NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+	/* keep last */
+	__NL80211_REG_RULE_ATTR_AFTER_LAST,
+	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ *	attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+	NL80211_RRF_NO_OFDM		= 1<<0,
+	NL80211_RRF_NO_CCK		= 1<<1,
+	NL80211_RRF_NO_INDOOR		= 1<<2,
+	NL80211_RRF_NO_OUTDOOR		= 1<<3,
+	NL80211_RRF_DFS			= 1<<4,
+	NL80211_RRF_PTP_ONLY		= 1<<5,
+	NL80211_RRF_PTMP_ONLY		= 1<<6,
+	NL80211_RRF_PASSIVE_SCAN	= 1<<7,
+	NL80211_RRF_NO_IBSS		= 1<<8,
+};
+
+/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ *	spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ *	channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ *	channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ *	receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ *	transmitting data
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ *	currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_survey_info {
+	__NL80211_SURVEY_INFO_INVALID,
+	NL80211_SURVEY_INFO_FREQUENCY,
+	NL80211_SURVEY_INFO_NOISE,
+	NL80211_SURVEY_INFO_IN_USE,
+	NL80211_SURVEY_INFO_CHANNEL_TIME,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+
+	/* keep last */
+	__NL80211_SURVEY_INFO_AFTER_LAST,
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ *	overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+	__NL80211_MNTR_FLAG_INVALID,
+	NL80211_MNTR_FLAG_FCSFAIL,
+	NL80211_MNTR_FLAG_PLCPFAIL,
+	NL80211_MNTR_FLAG_CONTROL,
+	NL80211_MNTR_FLAG_OTHER_BSS,
+	NL80211_MNTR_FLAG_COOK_FRAMES,
+
+	/* keep last */
+	__NL80211_MNTR_FLAG_AFTER_LAST,
+	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS.  This is done via Root
+ * Announcement frames.
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+	__NL80211_MESHCONF_INVALID,
+	NL80211_MESHCONF_RETRY_TIMEOUT,
+	NL80211_MESHCONF_CONFIRM_TIMEOUT,
+	NL80211_MESHCONF_HOLDING_TIMEOUT,
+	NL80211_MESHCONF_MAX_PEER_LINKS,
+	NL80211_MESHCONF_MAX_RETRIES,
+	NL80211_MESHCONF_TTL,
+	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+	NL80211_MESHCONF_PATH_REFRESH_TIME,
+	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
+	NL80211_MESHCONF_ELEMENT_TTL,
+	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+
+	/* keep last */
+	__NL80211_MESHCONF_ATTR_AFTER_LAST,
+	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ * vendor specific path selection algorithm or disable it to use the default
+ * HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ * vendor specific path metric or disable it to use the default Airtime
+ * metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon.  When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management).  When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+	__NL80211_MESH_SETUP_INVALID,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
+
+	/* keep last */
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *	disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+	__NL80211_TXQ_ATTR_INVALID,
+	NL80211_TXQ_ATTR_QUEUE,
+	NL80211_TXQ_ATTR_TXOP,
+	NL80211_TXQ_ATTR_CWMIN,
+	NL80211_TXQ_ATTR_CWMAX,
+	NL80211_TXQ_ATTR_AIFS,
+
+	/* keep last */
+	__NL80211_TXQ_ATTR_AFTER_LAST,
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+	NL80211_TXQ_Q_VO,
+	NL80211_TXQ_Q_VI,
+	NL80211_TXQ_Q_BE,
+	NL80211_TXQ_Q_BK
+};
+
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
+};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin);
+ *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ *	from a Probe Response frame; otherwise they are from a Beacon frame.
+ *	However, if the driver does not indicate the source of the IEs, these
+ *	IEs may be from either frame subtype.
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
+ *	yet been received
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
+	NL80211_BSS_BEACON_IES,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
+ */
+enum nl80211_bss_status {
+	NL80211_BSS_STATUS_AUTHENTICATED,
+	NL80211_BSS_STATUS_ASSOCIATED,
+	NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ *	trying multiple times); this is invalid in netlink -- leave out
+ *	the attribute for this on CONNECT commands.
+ */
+enum nl80211_auth_type {
+	NL80211_AUTHTYPE_OPEN_SYSTEM,
+	NL80211_AUTHTYPE_SHARED_KEY,
+	NL80211_AUTHTYPE_FT,
+	NL80211_AUTHTYPE_NETWORK_EAP,
+
+	/* keep last */
+	__NL80211_AUTHTYPE_NUM,
+	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+	NL80211_AUTHTYPE_AUTOMATIC
+};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+
+	NUM_NL80211_KEYTYPES
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+	NL80211_WPA_VERSION_1 = 1 << 0,
+	NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ *	unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ *	multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+	__NL80211_KEY_DEFAULT_TYPE_INVALID,
+	NL80211_KEY_DEFAULT_TYPE_UNICAST,
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+	NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ *	specified the default depends on whether a MAC address was
+ *	given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+	__NL80211_KEY_INVALID,
+	NL80211_KEY_DATA,
+	NL80211_KEY_IDX,
+	NL80211_KEY_CIPHER,
+	NL80211_KEY_SEQ,
+	NL80211_KEY_DEFAULT,
+	NL80211_KEY_DEFAULT_MGMT,
+	NL80211_KEY_TYPE,
+	NL80211_KEY_DEFAULT_TYPES,
+
+	/* keep last */
+	__NL80211_KEY_AFTER_LAST,
+	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ *	1 = 500 kbps) but without the IE length restriction (at most
+ *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+	__NL80211_TXRATE_INVALID,
+	NL80211_TXRATE_LEGACY,
+
+	/* keep last */
+	__NL80211_TXRATE_AFTER_LAST,
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ */
+enum nl80211_band {
+	NL80211_BAND_2GHZ,
+	NL80211_BAND_5GHZ,
+};
+
+enum nl80211_ps_state {
+	NL80211_PS_DISABLED,
+	NL80211_PS_ENABLED,
+};
+
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ *	the threshold for the RSSI level at which an event will be sent. Zero
+ *	to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ *	the minimum amount the RSSI level must change after an event before a
+ *	new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+	__NL80211_ATTR_CQM_INVALID,
+	NL80211_ATTR_CQM_RSSI_THOLD,
+	NL80211_ATTR_CQM_RSSI_HYST,
+	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+
+	/* keep last */
+	__NL80211_ATTR_CQM_AFTER_LAST,
+	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+ *      configured threshold
+ */
+enum nl80211_cqm_rssi_threshold_event {
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+};
+
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+	NL80211_TX_POWER_AUTOMATIC,
+	NL80211_TX_POWER_LIMITED,
+	NL80211_TX_POWER_FIXED,
+};
+
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+	__NL80211_WOWLAN_PKTPAT_INVALID,
+	NL80211_WOWLAN_PKTPAT_MASK,
+	NL80211_WOWLAN_PKTPAT_PATTERN,
+
+	NUM_NL80211_WOWLAN_PKTPAT,
+	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ *	i.e. as though the packet was an 802.3 packet, so the pattern matching
+ *	is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *	used when setting, used only to indicate that GTK rekeying is supported
+ *	by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *	done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *	packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *	(on devices that have rfkill in the device) (flag)
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+#define NL80211_KCK_LEN			16
+#define NL80211_KEK_LEN			16
+#define NL80211_REPLAY_CTR_LEN		8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+	__NL80211_REKEY_DATA_INVALID,
+	NL80211_REKEY_DATA_KEK,
+	NL80211_REKEY_DATA_KCK,
+	NL80211_REKEY_DATA_REPLAY_CTR,
+
+	/* keep last */
+	NUM_NL80211_REKEY_DATA,
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *	Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *	in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *	element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+	NL80211_HIDDEN_SSID_NOT_IN_USE,
+	NL80211_HIDDEN_SSID_ZERO_LEN,
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+	__NL80211_STA_WME_INVALID,
+	NL80211_STA_WME_UAPSD_QUEUES,
+	NL80211_STA_WME_MAX_SP,
+
+	/* keep last */
+	__NL80211_STA_WME_AFTER_LAST,
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ *	priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ *	(internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ *	(internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+	__NL80211_PMKSA_CANDIDATE_INVALID,
+	NL80211_PMKSA_CANDIDATE_INDEX,
+	NL80211_PMKSA_CANDIDATE_BSSID,
+	NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+	/* keep last */
+	NUM_NL80211_PMKSA_CANDIDATE,
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+	NL80211_TDLS_DISCOVERY_REQ,
+	NL80211_TDLS_SETUP,
+	NL80211_TDLS_TEARDOWN,
+	NL80211_TDLS_ENABLE_LINK,
+	NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ *	TX status to the socket error queue when requested with the
+ *	socket option.
+ */
+enum nl80211_feature_flags {
+	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *	protocols for probe-response offloading by the driver/FW.
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *	Each enum value represents a bit in the bitmap of supported
+ *	protocols. Typically a subset of probe-requests belonging to a
+ *	supported protocol will be excluded from offload and uploaded
+ *	to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
+};
+
+/*
+ * enum nl80211_btcoex_acl_role - Bluetooth ACL link role
+ * @NL80211_BTCOEX_ACL_ROLE_UNKNOWN: Bluetooth chip role unknown.
+ * @NL80211_BTCOEX_ACL_ROLE_MASTER: Bluetooth chip is in master role.
+ * @NL80211_BTCOEX_ACL_ROLE_SLAVE: Bluetooth chip is in slave role.
+ */
+enum nl80211_btcoex_acl_role {
+	NL80211_BTCOEX_ACL_ROLE_UNKNOWN,
+	NL80211_BTCOEX_ACL_ROLE_MASTER,
+	NL80211_BTCOEX_ACL_ROLE_SLAVE
+};
+/**
+ * enum nl80211_btcoex_antenna_config - Bluetooth WiFi antenna configuration
+ * @NL80211_BTCOEX_ANTENNA_DA: Bluetooth and WiFI chip used dual antenna.
+ * @NL80211_BTCOEX_ANTENNA_SA: Bluetooth and WiFI chip used dual antenna.
+ */
+enum nl80211_btcoex_antenna_config {
+	NL80211_BTCOEX_ANTENNA_DA,
+	NL80211_BTCOEX_ANTENNA_SA,
+};
+/**
+ * enum nl80211_btcoex_vendor_list - Bluetooth chip vendor list
+ * @NL80211_BTCOEX_VENDOR_DEFAULT: Uses default Bluetooth chip.
+ * @NL80211_BTCOEX_VENDOR_QCOM: Uses Qualcomm Bluetooth chip.
+ */
+enum nl80211_btcoex_vendor_list {
+	NL80211_BTCOEX_VENDOR_DEFAULT,
+	NL80211_BTCOEX_VENDOR_QCOM,
+};
+
+enum nl80211_btcoex_cmds {
+	NL80211_WMI_SET_BT_STATUS = 0,
+	NL80211_WMI_SET_BT_PARAMS,
+	NL80211_WMI_SET_BT_FT_ANT,
+	NL80211_WMI_SET_COLOCATED_BT_DEV,
+	NL80211_WMI_SET_BT_INQUIRY_PAGE_CONFIG,
+	NL80211_WMI_SET_BT_SCO_CONFIG,
+	NL80211_WMI_SET_BT_A2DP_CONFIG,
+	NL80211_WMI_SET_BT_ACLCOEX_CONFIG,
+	NL80211_WMI_SET_BT_DEBUG,
+	NL80211_WMI_SET_BT_OPSTATUS,
+	NL80211_WMI_GET_BT_CONFIG,
+	NL80211_WMI_GET_BT_STATS,
+	NL80211_WMI_BT_MAX,
+};
+#endif /* __LINUX_NL80211_H */
diff --git a/include/compat/linux/of.h b/include/compat/linux/of.h
new file mode 100755
index 0000000..c5dc87c
--- /dev/null
+++ b/include/compat/linux/of.h
@@ -0,0 +1,16 @@
+#ifndef _COMPAT_LINUX_OF_H
+#define _COMPAT_LINUX_OF_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34))
+#include_next <linux/of.h>
+#else
+
+#ifdef CONFIG_OF
+#include_next <linux/of.h>
+#endif /* CONFIG_OF */
+
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) */
+
+#endif	/* _COMPAT_LINUX_OF_H */
diff --git a/include/compat/linux/pci-aspm.h b/include/compat/linux/pci-aspm.h
new file mode 100755
index 0000000..2bc6efb
--- /dev/null
+++ b/include/compat/linux/pci-aspm.h
@@ -0,0 +1,5 @@
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25))
+#include_next <linux/pci-aspm.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */
diff --git a/include/compat/linux/pci_ids.h b/include/compat/linux/pci_ids.h
new file mode 100755
index 0000000..c3dc899
--- /dev/null
+++ b/include/compat/linux/pci_ids.h
@@ -0,0 +1,2879 @@
+/*
+ *	PCI Class, Vendor and Device IDs
+ *
+ *	Please keep sorted.
+ *
+ *	Do not add new entries to this file unless the definitions
+ *	are shared between multiple drivers.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED		0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
+
+#define PCI_BASE_CLASS_STORAGE		0x01
+#define PCI_CLASS_STORAGE_SCSI		0x0100
+#define PCI_CLASS_STORAGE_IDE		0x0101
+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
+#define PCI_CLASS_STORAGE_IPI		0x0103
+#define PCI_CLASS_STORAGE_RAID		0x0104
+#define PCI_CLASS_STORAGE_SATA		0x0106
+#define PCI_CLASS_STORAGE_SATA_AHCI	0x010601
+#define PCI_CLASS_STORAGE_SAS		0x0107
+#define PCI_CLASS_STORAGE_OTHER		0x0180
+
+#define PCI_BASE_CLASS_NETWORK		0x02
+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
+#define PCI_CLASS_NETWORK_FDDI		0x0202
+#define PCI_CLASS_NETWORK_ATM		0x0203
+#define PCI_CLASS_NETWORK_OTHER		0x0280
+
+#define PCI_BASE_CLASS_DISPLAY		0x03
+#define PCI_CLASS_DISPLAY_VGA		0x0300
+#define PCI_CLASS_DISPLAY_XGA		0x0301
+#define PCI_CLASS_DISPLAY_3D		0x0302
+#define PCI_CLASS_DISPLAY_OTHER		0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
+
+#define PCI_BASE_CLASS_MEMORY		0x05
+#define PCI_CLASS_MEMORY_RAM		0x0500
+#define PCI_CLASS_MEMORY_FLASH		0x0501
+#define PCI_CLASS_MEMORY_OTHER		0x0580
+
+#define PCI_BASE_CLASS_BRIDGE		0x06
+#define PCI_CLASS_BRIDGE_HOST		0x0600
+#define PCI_CLASS_BRIDGE_ISA		0x0601
+#define PCI_CLASS_BRIDGE_EISA		0x0602
+#define PCI_CLASS_BRIDGE_MC		0x0603
+#define PCI_CLASS_BRIDGE_PCI		0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
+#define PCI_CLASS_BRIDGE_NUBUS		0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
+#define PCI_CLASS_BRIDGE_OTHER		0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION	0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
+
+#define PCI_BASE_CLASS_SYSTEM		0x08
+#define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC	0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC	0x080020
+#define PCI_CLASS_SYSTEM_DMA		0x0801
+#define PCI_CLASS_SYSTEM_TIMER		0x0802
+#define PCI_CLASS_SYSTEM_RTC		0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
+#define PCI_CLASS_SYSTEM_SDHCI		0x0805
+#define PCI_CLASS_SYSTEM_OTHER		0x0880
+
+#define PCI_BASE_CLASS_INPUT		0x09
+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
+#define PCI_CLASS_INPUT_PEN		0x0901
+#define PCI_CLASS_INPUT_MOUSE		0x0902
+#define PCI_CLASS_INPUT_SCANNER		0x0903
+#define PCI_CLASS_INPUT_GAMEPORT	0x0904
+#define PCI_CLASS_INPUT_OTHER		0x0980
+
+#define PCI_BASE_CLASS_DOCKING		0x0a
+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
+#define PCI_CLASS_DOCKING_OTHER		0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR	0x0b
+#define PCI_CLASS_PROCESSOR_386		0x0b00
+#define PCI_CLASS_PROCESSOR_486		0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
+#define PCI_CLASS_PROCESSOR_CO		0x0b40
+
+#define PCI_BASE_CLASS_SERIAL		0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
+#define PCI_CLASS_SERIAL_FIREWIRE_OHCI	0x0c0010
+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
+#define PCI_CLASS_SERIAL_SSA		0x0c02
+#define PCI_CLASS_SERIAL_USB		0x0c03
+#define PCI_CLASS_SERIAL_USB_UHCI	0x0c0300
+#define PCI_CLASS_SERIAL_USB_OHCI	0x0c0310
+#define PCI_CLASS_SERIAL_USB_EHCI	0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI	0x0c0330
+#define PCI_CLASS_SERIAL_FIBER		0x0c04
+#define PCI_CLASS_SERIAL_SMBUS		0x0c05
+
+#define PCI_BASE_CLASS_WIRELESS			0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER	0x0d10
+#define PCI_CLASS_WIRELESS_WHCI			0x0d1010
+
+#define PCI_BASE_CLASS_INTELLIGENT	0x0e
+#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE	0x0f
+#define PCI_CLASS_SATELLITE_TV		0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
+#define PCI_CLASS_SATELLITE_VOICE	0x0f03
+#define PCI_CLASS_SATELLITE_DATA	0x0f04
+
+#define PCI_BASE_CLASS_CRYPT		0x10
+#define PCI_CLASS_CRYPT_NETWORK		0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
+#define PCI_CLASS_CRYPT_OTHER		0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO		0x1100
+#define PCI_CLASS_SP_OTHER		0x1180
+
+#define PCI_CLASS_OTHERS		0xff
+
+/* Vendors and devices.  Sort key: vendor first, device next. */
+
+#define PCI_VENDOR_ID_TTTECH		0x0357
+#define PCI_DEVICE_ID_TTTECH_MC322	0x000a
+
+#define PCI_VENDOR_ID_DYNALINK		0x0675
+#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
+
+#define PCI_VENDOR_ID_BERKOM			0x0871
+#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
+#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
+
+#define PCI_VENDOR_ID_COMPAQ		0x0e11
+#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
+#define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
+#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
+#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
+#define PCI_DEVICE_ID_COMPAQ_CISSC	0x46
+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
+
+#define PCI_VENDOR_ID_NCR		0x1000
+#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
+#define PCI_DEVICE_ID_NCR_53C810	0x0001
+#define PCI_DEVICE_ID_NCR_53C820	0x0002
+#define PCI_DEVICE_ID_NCR_53C825	0x0003
+#define PCI_DEVICE_ID_NCR_53C815	0x0004
+#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
+#define PCI_DEVICE_ID_NCR_53C860	0x0006
+#define PCI_DEVICE_ID_LSI_53C1510	0x000a
+#define PCI_DEVICE_ID_NCR_53C896	0x000b
+#define PCI_DEVICE_ID_NCR_53C895	0x000c
+#define PCI_DEVICE_ID_NCR_53C885	0x000d
+#define PCI_DEVICE_ID_NCR_53C875	0x000f
+#define PCI_DEVICE_ID_NCR_53C1510	0x0010
+#define PCI_DEVICE_ID_LSI_53C895A	0x0012
+#define PCI_DEVICE_ID_LSI_53C875A	0x0013
+#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
+#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
+#define PCI_DEVICE_ID_LSI_53C1030	0x0030
+#define PCI_DEVICE_ID_LSI_1030_53C1035	0x0032
+#define PCI_DEVICE_ID_LSI_53C1035	0x0040
+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
+#define PCI_DEVICE_ID_LSI_FC909		0x0621
+#define PCI_DEVICE_ID_LSI_FC929		0x0622
+#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
+#define PCI_DEVICE_ID_LSI_FC919		0x0624
+#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
+#define PCI_DEVICE_ID_LSI_FC929X	0x0626
+#define PCI_DEVICE_ID_LSI_FC939X	0x0642
+#define PCI_DEVICE_ID_LSI_FC949X	0x0640
+#define PCI_DEVICE_ID_LSI_FC949ES	0x0646
+#define PCI_DEVICE_ID_LSI_FC919X	0x0628
+#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
+#define PCI_DEVICE_ID_LSI_61C102	0x0901
+#define PCI_DEVICE_ID_LSI_63C815	0x1000
+#define PCI_DEVICE_ID_LSI_SAS1064	0x0050
+#define PCI_DEVICE_ID_LSI_SAS1064R	0x0411
+#define PCI_DEVICE_ID_LSI_SAS1066	0x005E
+#define PCI_DEVICE_ID_LSI_SAS1068	0x0054
+#define PCI_DEVICE_ID_LSI_SAS1064A	0x005C
+#define PCI_DEVICE_ID_LSI_SAS1064E	0x0056
+#define PCI_DEVICE_ID_LSI_SAS1066E	0x005A
+#define PCI_DEVICE_ID_LSI_SAS1068E	0x0058
+#define PCI_DEVICE_ID_LSI_SAS1078	0x0060
+
+#define PCI_VENDOR_ID_ATI		0x1002
+/* Mach64 */
+#define PCI_DEVICE_ID_ATI_68800		0x4158
+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
+#define PCI_DEVICE_ID_ATI_215ET222	0x4554
+/* Mach64 / Rage */
+#define PCI_DEVICE_ID_ATI_215GB		0x4742
+#define PCI_DEVICE_ID_ATI_215GD		0x4744
+#define PCI_DEVICE_ID_ATI_215GI		0x4749
+#define PCI_DEVICE_ID_ATI_215GP		0x4750
+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
+#define PCI_DEVICE_ID_ATI_215XL		0x4752
+#define PCI_DEVICE_ID_ATI_215GT		0x4754
+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
+#define PCI_DEVICE_ID_ATI_215_IV	0x4756
+#define PCI_DEVICE_ID_ATI_215_IW	0x4757
+#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
+#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
+#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
+#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
+#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
+#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
+#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
+#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
+#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
+#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
+/* Mach64 VT */
+#define PCI_DEVICE_ID_ATI_264VT		0x5654
+#define PCI_DEVICE_ID_ATI_264VU		0x5655
+#define PCI_DEVICE_ID_ATI_264VV		0x5656
+/* Rage128 GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
+#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
+#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x5247
+/* Rage128 VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
+#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
+#define PCI_DEVICE_ID_ATI_RAGE128_SE	0x5345
+#define PCI_DEVICE_ID_ATI_RAGE128_SF	0x5346
+#define PCI_DEVICE_ID_ATI_RAGE128_SG	0x5347
+#define PCI_DEVICE_ID_ATI_RAGE128_SH	0x5348
+#define PCI_DEVICE_ID_ATI_RAGE128_SK	0x534b
+#define PCI_DEVICE_ID_ATI_RAGE128_SL	0x534c
+#define PCI_DEVICE_ID_ATI_RAGE128_SM	0x534d
+#define PCI_DEVICE_ID_ATI_RAGE128_SN	0x534e
+/* Rage128 Ultra */
+#define PCI_DEVICE_ID_ATI_RAGE128_TF	0x5446
+#define PCI_DEVICE_ID_ATI_RAGE128_TL	0x544c
+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
+#define PCI_DEVICE_ID_ATI_RAGE128_TS	0x5453
+#define PCI_DEVICE_ID_ATI_RAGE128_TT	0x5454
+#define PCI_DEVICE_ID_ATI_RAGE128_TU	0x5455
+/* Rage128 M3 */
+#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
+#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
+/* Rage128 M4 */
+#define PCI_DEVICE_ID_ATI_RAGE128_MF    0x4d46
+#define PCI_DEVICE_ID_ATI_RAGE128_ML    0x4d4c
+/* Rage128 Pro GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_PA	0x5041
+#define PCI_DEVICE_ID_ATI_RAGE128_PB	0x5042
+#define PCI_DEVICE_ID_ATI_RAGE128_PC	0x5043
+#define PCI_DEVICE_ID_ATI_RAGE128_PD	0x5044
+#define PCI_DEVICE_ID_ATI_RAGE128_PE	0x5045
+#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
+/* Rage128 Pro VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
+#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
+#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
+#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
+#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
+#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
+#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
+#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
+#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
+#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
+#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
+#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
+#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
+#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
+#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
+#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
+#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
+#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
+/* Rage128 M4 */
+/* Radeon R100 */
+#define PCI_DEVICE_ID_ATI_RADEON_QD	0x5144
+#define PCI_DEVICE_ID_ATI_RADEON_QE	0x5145
+#define PCI_DEVICE_ID_ATI_RADEON_QF	0x5146
+#define PCI_DEVICE_ID_ATI_RADEON_QG	0x5147
+/* Radeon RV100 (VE) */
+#define PCI_DEVICE_ID_ATI_RADEON_QY	0x5159
+#define PCI_DEVICE_ID_ATI_RADEON_QZ	0x515a
+/* Radeon R200 (8500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QL	0x514c
+#define PCI_DEVICE_ID_ATI_RADEON_QN	0x514e
+#define PCI_DEVICE_ID_ATI_RADEON_QO	0x514f
+#define PCI_DEVICE_ID_ATI_RADEON_Ql	0x516c
+#define PCI_DEVICE_ID_ATI_RADEON_BB	0x4242
+/* Radeon R200 (9100) */
+#define PCI_DEVICE_ID_ATI_RADEON_QM	0x514d
+/* Radeon RV200 (7500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QW	0x5157
+#define PCI_DEVICE_ID_ATI_RADEON_QX	0x5158
+/* Radeon NV-100 */
+/* Radeon RV250 (9000) */
+#define PCI_DEVICE_ID_ATI_RADEON_Id	0x4964
+#define PCI_DEVICE_ID_ATI_RADEON_Ie	0x4965
+#define PCI_DEVICE_ID_ATI_RADEON_If	0x4966
+#define PCI_DEVICE_ID_ATI_RADEON_Ig	0x4967
+/* Radeon RV280 (9200) */
+#define PCI_DEVICE_ID_ATI_RADEON_Ya	0x5961
+#define PCI_DEVICE_ID_ATI_RADEON_Yd	0x5964
+/* Radeon R300 (9500) */
+/* Radeon R300 (9700) */
+#define PCI_DEVICE_ID_ATI_RADEON_ND	0x4e44
+#define PCI_DEVICE_ID_ATI_RADEON_NE	0x4e45
+#define PCI_DEVICE_ID_ATI_RADEON_NF	0x4e46
+#define PCI_DEVICE_ID_ATI_RADEON_NG	0x4e47
+/* Radeon R350 (9800) */
+/* Radeon RV350 (9600) */
+/* Radeon M6 */
+#define PCI_DEVICE_ID_ATI_RADEON_LY	0x4c59
+#define PCI_DEVICE_ID_ATI_RADEON_LZ	0x4c5a
+/* Radeon M7 */
+#define PCI_DEVICE_ID_ATI_RADEON_LW	0x4c57
+#define PCI_DEVICE_ID_ATI_RADEON_LX	0x4c58
+/* Radeon M9 */
+#define PCI_DEVICE_ID_ATI_RADEON_Ld	0x4c64
+#define PCI_DEVICE_ID_ATI_RADEON_Le	0x4c65
+#define PCI_DEVICE_ID_ATI_RADEON_Lf	0x4c66
+#define PCI_DEVICE_ID_ATI_RADEON_Lg	0x4c67
+/* Radeon */
+/* RadeonIGP */
+#define PCI_DEVICE_ID_ATI_RS100		0xcab0
+#define PCI_DEVICE_ID_ATI_RS200		0xcab2
+#define PCI_DEVICE_ID_ATI_RS200_B	0xcbb2
+#define PCI_DEVICE_ID_ATI_RS250		0xcab3
+#define PCI_DEVICE_ID_ATI_RS300_100	0x5830
+#define PCI_DEVICE_ID_ATI_RS300_133	0x5831
+#define PCI_DEVICE_ID_ATI_RS300_166	0x5832
+#define PCI_DEVICE_ID_ATI_RS300_200	0x5833
+#define PCI_DEVICE_ID_ATI_RS350_100     0x7830
+#define PCI_DEVICE_ID_ATI_RS350_133     0x7831
+#define PCI_DEVICE_ID_ATI_RS350_166     0x7832
+#define PCI_DEVICE_ID_ATI_RS350_200     0x7833
+#define PCI_DEVICE_ID_ATI_RS400_100     0x5a30
+#define PCI_DEVICE_ID_ATI_RS400_133     0x5a31
+#define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
+#define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
+#define PCI_DEVICE_ID_ATI_RS480         0x5950
+/* ATI IXP Chipset */
+#define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
+#define PCI_DEVICE_ID_ATI_IXP200_SMBUS	0x4353
+#define PCI_DEVICE_ID_ATI_IXP300_SMBUS	0x4363
+#define PCI_DEVICE_ID_ATI_IXP300_IDE	0x4369
+#define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
+#define PCI_DEVICE_ID_ATI_IXP400_SMBUS	0x4372
+#define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
+#define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
+#define PCI_DEVICE_ID_ATI_IXP400_SATA2	0x437a
+#define PCI_DEVICE_ID_ATI_IXP600_SATA	0x4380
+#define PCI_DEVICE_ID_ATI_SBX00_SMBUS	0x4385
+#define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
+#define PCI_DEVICE_ID_ATI_IXP700_SATA	0x4390
+#define PCI_DEVICE_ID_ATI_IXP700_IDE	0x439c
+
+#define PCI_VENDOR_ID_VLSI		0x1004
+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
+
+/* AMD RD890 Chipset */
+#define PCI_DEVICE_ID_RD890_IOMMU	0x5a23
+
+#define PCI_VENDOR_ID_ADL		0x1005
+#define PCI_DEVICE_ID_ADL_2301		0x2301
+
+#define PCI_VENDOR_ID_NS		0x100b
+#define PCI_DEVICE_ID_NS_87415		0x0002
+#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
+#define PCI_DEVICE_ID_NS_87560_USB	0x0012
+#define PCI_DEVICE_ID_NS_83815		0x0020
+#define PCI_DEVICE_ID_NS_83820		0x0022
+#define PCI_DEVICE_ID_NS_CS5535_ISA	0x002b
+#define PCI_DEVICE_ID_NS_CS5535_IDE	0x002d
+#define PCI_DEVICE_ID_NS_CS5535_AUDIO	0x002e
+#define PCI_DEVICE_ID_NS_CS5535_USB	0x002f
+#define PCI_DEVICE_ID_NS_GX_VIDEO	0x0030
+#define PCI_DEVICE_ID_NS_SATURN		0x0035
+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE	0x0500
+#define PCI_DEVICE_ID_NS_SCx200_SMI	0x0501
+#define PCI_DEVICE_ID_NS_SCx200_IDE	0x0502
+#define PCI_DEVICE_ID_NS_SCx200_AUDIO	0x0503
+#define PCI_DEVICE_ID_NS_SCx200_VIDEO	0x0504
+#define PCI_DEVICE_ID_NS_SCx200_XBUS	0x0505
+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE	0x0510
+#define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
+#define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
+#define PCI_DEVICE_ID_NS_87410		0xd001
+
+#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE  0x0028
+
+#define PCI_VENDOR_ID_TSENG		0x100c
+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
+
+#define PCI_VENDOR_ID_WEITEK		0x100e
+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
+
+#define PCI_VENDOR_ID_DEC		0x1011
+#define PCI_DEVICE_ID_DEC_BRD		0x0001
+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+#define PCI_DEVICE_ID_DEC_TGA		0x0004
+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+#define PCI_DEVICE_ID_DEC_21142		0x0019
+#define PCI_DEVICE_ID_DEC_21052		0x0021
+#define PCI_DEVICE_ID_DEC_21150		0x0022
+#define PCI_DEVICE_ID_DEC_21152		0x0024
+#define PCI_DEVICE_ID_DEC_21153		0x0025
+#define PCI_DEVICE_ID_DEC_21154		0x0026
+#define PCI_DEVICE_ID_DEC_21285		0x1065
+#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
+
+#define PCI_VENDOR_ID_CIRRUS		0x1013
+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
+#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
+#define PCI_DEVICE_ID_CIRRUS_4610	0x6001
+#define PCI_DEVICE_ID_CIRRUS_4612	0x6003
+#define PCI_DEVICE_ID_CIRRUS_4615	0x6004
+
+#define PCI_VENDOR_ID_IBM		0x1014
+#define PCI_DEVICE_ID_IBM_TR		0x0018
+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
+#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
+#define PCI_DEVICE_ID_IBM_SNIPE		0x0180
+#define PCI_DEVICE_ID_IBM_CITRINE		0x028C
+#define PCI_DEVICE_ID_IBM_GEMSTONE		0xB166
+#define PCI_DEVICE_ID_IBM_OBSIDIAN		0x02BD
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1	0x0031
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2	0x0219
+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX		0x021A
+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
+
+#define PCI_SUBVENDOR_ID_IBM		0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT	0x03d4
+
+#define PCI_VENDOR_ID_UNISYS		0x1018
+#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
+
+#define PCI_VENDOR_ID_COMPEX2		0x101a /* pci.ids says "AT&T GIS (NCR)" */
+#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
+
+#define PCI_VENDOR_ID_WD		0x101c
+#define PCI_DEVICE_ID_WD_90C		0xc24a
+
+#define PCI_VENDOR_ID_AMI		0x101e
+#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
+#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
+#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
+
+#define PCI_VENDOR_ID_AMD		0x1022
+#define PCI_DEVICE_ID_AMD_K8_NB		0x1100
+#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP	0x1101
+#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL	0x1102
+#define PCI_DEVICE_ID_AMD_K8_NB_MISC	0x1103
+#define PCI_DEVICE_ID_AMD_10H_NB_HT	0x1200
+#define PCI_DEVICE_ID_AMD_10H_NB_MAP	0x1201
+#define PCI_DEVICE_ID_AMD_10H_NB_DRAM	0x1202
+#define PCI_DEVICE_ID_AMD_10H_NB_MISC	0x1203
+#define PCI_DEVICE_ID_AMD_10H_NB_LINK	0x1204
+#define PCI_DEVICE_ID_AMD_11H_NB_HT	0x1300
+#define PCI_DEVICE_ID_AMD_11H_NB_MAP	0x1301
+#define PCI_DEVICE_ID_AMD_11H_NB_DRAM	0x1302
+#define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
+#define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
+#define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
+#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
+#define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
+#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
+#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
+#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
+#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
+#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
+#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
+#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
+#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
+#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
+#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
+#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
+#define PCI_DEVICE_ID_AMD_VIPER_7440	0x7440
+#define PCI_DEVICE_ID_AMD_OPUS_7441	0x7441
+#define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
+#define PCI_DEVICE_ID_AMD_VIPER_7443	0x7443
+#define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
+#define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
+#define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
+#define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
+#define PCI_DEVICE_ID_AMD_8111_SMBUS2	0x746a
+#define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
+#define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
+#define PCI_DEVICE_ID_AMD_8151_0	0x7454
+#define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
+#define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
+#define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
+#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS	0x780b
+#define PCI_DEVICE_ID_AMD_CS5535_IDE    0x208F
+#define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
+#define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
+#define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
+#define PCI_DEVICE_ID_AMD_CS5536_OHC    0x2094
+#define PCI_DEVICE_ID_AMD_CS5536_EHC    0x2095
+#define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
+#define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
+#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
+#define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
+#define PCI_DEVICE_ID_AMD_LX_AES    0x2082
+#define PCI_DEVICE_ID_AMD_HUDSON2_IDE		0x780c
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE	0x7800
+
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
+#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
+#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
+#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
+#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
+#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
+#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
+#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
+#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
+#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
+#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
+
+#define PCI_VENDOR_ID_AI		0x1025
+#define PCI_DEVICE_ID_AI_M1435		0x1435
+
+#define PCI_VENDOR_ID_DELL		0x1028
+#define PCI_DEVICE_ID_DELL_RACIII	0x0008
+#define PCI_DEVICE_ID_DELL_RAC4		0x0012
+#define PCI_DEVICE_ID_DELL_PERC5	0x0015
+
+#define PCI_VENDOR_ID_MATROX		0x102B
+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
+#define PCI_DEVICE_ID_MATROX_MYS_AGP	0x051e
+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
+#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
+#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
+#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
+#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
+#define	PCI_DEVICE_ID_MATROX_G400	0x0525
+#define	PCI_DEVICE_ID_MATROX_G200EV_PCI	0x0530
+#define PCI_DEVICE_ID_MATROX_G550	0x2527
+#define PCI_DEVICE_ID_MATROX_VIA	0x4536
+
+#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS	0x14f2
+
+#define PCI_VENDOR_ID_CT		0x102c
+#define PCI_DEVICE_ID_CT_69000		0x00c0
+#define PCI_DEVICE_ID_CT_65545		0x00d8
+#define PCI_DEVICE_ID_CT_65548		0x00dc
+#define PCI_DEVICE_ID_CT_65550		0x00e0
+#define PCI_DEVICE_ID_CT_65554		0x00e4
+#define PCI_DEVICE_ID_CT_65555		0x00e5
+
+#define PCI_VENDOR_ID_MIRO		0x1031
+#define PCI_DEVICE_ID_MIRO_36050	0x5601
+#define PCI_DEVICE_ID_MIRO_DC10PLUS	0x7efe
+#define PCI_DEVICE_ID_MIRO_DC30PLUS	0xd801
+
+#define PCI_VENDOR_ID_NEC		0x1033
+#define PCI_DEVICE_ID_NEC_CBUS_1	0x0001 /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_LOCAL		0x0002 /* Local Bridge */
+#define PCI_DEVICE_ID_NEC_ATM		0x0003 /* ATM LAN Controller */
+#define PCI_DEVICE_ID_NEC_R4000		0x0004 /* R4000 Bridge */
+#define PCI_DEVICE_ID_NEC_486		0x0005 /* 486 Like Peripheral Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_1	0x0006 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_UXBUS		0x0007 /* UX-Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_2	0x0008 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_GRAPH		0x0009 /* PCI-CoreGraph Bridge */
+#define PCI_DEVICE_ID_NEC_VL		0x0016 /* PCI-VL Bridge */
+#define PCI_DEVICE_ID_NEC_STARALPHA2	0x002c /* STAR ALPHA2 */
+#define PCI_DEVICE_ID_NEC_CBUS_2	0x002d /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_USB		0x0035 /* PCI-USB Host */
+#define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
+#define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
+#define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
+#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
+#define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
+#define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6
+#define PCI_DEVICE_ID_NEC_PC9821CS01    0x800c /* PC-9821-CS01 */
+#define PCI_DEVICE_ID_NEC_PC9821NRB06   0x800d /* PC-9821NR-B06 */
+
+#define PCI_VENDOR_ID_FD		0x1036
+#define PCI_DEVICE_ID_FD_36C70		0x0000
+
+#define PCI_VENDOR_ID_SI		0x1039
+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
+#define PCI_DEVICE_ID_SI_6202		0x0002
+#define PCI_DEVICE_ID_SI_503		0x0008
+#define PCI_DEVICE_ID_SI_ACPI		0x0009
+#define PCI_DEVICE_ID_SI_SMBUS		0x0016
+#define PCI_DEVICE_ID_SI_LPC		0x0018
+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
+#define PCI_DEVICE_ID_SI_6205		0x0205
+#define PCI_DEVICE_ID_SI_501		0x0406
+#define PCI_DEVICE_ID_SI_496		0x0496
+#define PCI_DEVICE_ID_SI_300		0x0300
+#define PCI_DEVICE_ID_SI_315H		0x0310
+#define PCI_DEVICE_ID_SI_315		0x0315
+#define PCI_DEVICE_ID_SI_315PRO		0x0325
+#define PCI_DEVICE_ID_SI_530		0x0530
+#define PCI_DEVICE_ID_SI_540		0x0540
+#define PCI_DEVICE_ID_SI_550		0x0550
+#define PCI_DEVICE_ID_SI_540_VGA	0x5300
+#define PCI_DEVICE_ID_SI_550_VGA	0x5315
+#define PCI_DEVICE_ID_SI_620		0x0620
+#define PCI_DEVICE_ID_SI_630		0x0630
+#define PCI_DEVICE_ID_SI_633		0x0633
+#define PCI_DEVICE_ID_SI_635		0x0635
+#define PCI_DEVICE_ID_SI_640		0x0640
+#define PCI_DEVICE_ID_SI_645		0x0645
+#define PCI_DEVICE_ID_SI_646		0x0646
+#define PCI_DEVICE_ID_SI_648		0x0648
+#define PCI_DEVICE_ID_SI_650		0x0650
+#define PCI_DEVICE_ID_SI_651		0x0651
+#define PCI_DEVICE_ID_SI_655		0x0655
+#define PCI_DEVICE_ID_SI_661		0x0661
+#define PCI_DEVICE_ID_SI_730		0x0730
+#define PCI_DEVICE_ID_SI_733		0x0733
+#define PCI_DEVICE_ID_SI_630_VGA	0x6300
+#define PCI_DEVICE_ID_SI_735		0x0735
+#define PCI_DEVICE_ID_SI_740		0x0740
+#define PCI_DEVICE_ID_SI_741		0x0741
+#define PCI_DEVICE_ID_SI_745		0x0745
+#define PCI_DEVICE_ID_SI_746		0x0746
+#define PCI_DEVICE_ID_SI_755		0x0755
+#define PCI_DEVICE_ID_SI_760		0x0760
+#define PCI_DEVICE_ID_SI_900		0x0900
+#define PCI_DEVICE_ID_SI_961		0x0961
+#define PCI_DEVICE_ID_SI_962		0x0962
+#define PCI_DEVICE_ID_SI_963		0x0963
+#define PCI_DEVICE_ID_SI_965		0x0965
+#define PCI_DEVICE_ID_SI_966		0x0966
+#define PCI_DEVICE_ID_SI_968		0x0968
+#define PCI_DEVICE_ID_SI_1180		0x1180
+#define PCI_DEVICE_ID_SI_5511		0x5511
+#define PCI_DEVICE_ID_SI_5513		0x5513
+#define PCI_DEVICE_ID_SI_5517		0x5517
+#define PCI_DEVICE_ID_SI_5518		0x5518
+#define PCI_DEVICE_ID_SI_5571		0x5571
+#define PCI_DEVICE_ID_SI_5581		0x5581
+#define PCI_DEVICE_ID_SI_5582		0x5582
+#define PCI_DEVICE_ID_SI_5591		0x5591
+#define PCI_DEVICE_ID_SI_5596		0x5596
+#define PCI_DEVICE_ID_SI_5597		0x5597
+#define PCI_DEVICE_ID_SI_5598		0x5598
+#define PCI_DEVICE_ID_SI_5600		0x5600
+#define PCI_DEVICE_ID_SI_7012		0x7012
+#define PCI_DEVICE_ID_SI_7013		0x7013
+#define PCI_DEVICE_ID_SI_7016		0x7016
+#define PCI_DEVICE_ID_SI_7018		0x7018
+
+#define PCI_VENDOR_ID_HP		0x103c
+#define PCI_DEVICE_ID_HP_VISUALIZE_EG	0x1005
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6	0x1006
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4	0x1008
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2	0x100a
+#define PCI_DEVICE_ID_HP_TACHYON	0x1028
+#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
+#define PCI_DEVICE_ID_HP_J2585A		0x1030
+#define PCI_DEVICE_ID_HP_J2585B		0x1031
+#define PCI_DEVICE_ID_HP_J2973A		0x1040
+#define PCI_DEVICE_ID_HP_J2970A		0x1042
+#define PCI_DEVICE_ID_HP_DIVA		0x1048
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1	0x1049
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2	0x104A
+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO	0x104B
+#define PCI_DEVICE_ID_HP_REO_IOC	0x10f1
+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE	0x108b
+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME	0x1223
+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE	0x1226
+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR	0x1227
+#define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
+#define PCI_DEVICE_ID_HP_PCIX_LBA	0x122e
+#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
+#define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
+#define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
+#define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
+#define PCI_DEVICE_ID_HP_DIVA_HURRICANE	0x132a
+#define PCI_DEVICE_ID_HP_CISSA		0x3220
+#define PCI_DEVICE_ID_HP_CISSC		0x3230
+#define PCI_DEVICE_ID_HP_CISSD		0x3238
+#define PCI_DEVICE_ID_HP_CISSE		0x323a
+#define PCI_DEVICE_ID_HP_CISSF		0x323b
+#define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
+
+#define PCI_VENDOR_ID_PCTECH		0x1042
+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
+
+#define PCI_VENDOR_ID_ASUSTEK		0x1043
+#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
+
+#define PCI_VENDOR_ID_DPT		0x1044
+#define PCI_DEVICE_ID_DPT		0xa400
+
+#define PCI_VENDOR_ID_OPTI		0x1045
+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
+
+#define PCI_VENDOR_ID_ELSA		0x1048
+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
+
+#define PCI_VENDOR_ID_STMICRO		0x104A
+
+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
+
+#define PCI_VENDOR_ID_TI		0x104c
+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
+#define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
+#define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
+#define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
+#define PCI_DEVICE_ID_TI_X515		0x8036
+#define PCI_DEVICE_ID_TI_XX12		0x8039
+#define PCI_DEVICE_ID_TI_XX12_FM	0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A	0x8231
+#define PCI_DEVICE_ID_TI_1130		0xac12
+#define PCI_DEVICE_ID_TI_1031		0xac13
+#define PCI_DEVICE_ID_TI_1131		0xac15
+#define PCI_DEVICE_ID_TI_1250		0xac16
+#define PCI_DEVICE_ID_TI_1220		0xac17
+#define PCI_DEVICE_ID_TI_1221		0xac19
+#define PCI_DEVICE_ID_TI_1210		0xac1a
+#define PCI_DEVICE_ID_TI_1450		0xac1b
+#define PCI_DEVICE_ID_TI_1225		0xac1c
+#define PCI_DEVICE_ID_TI_1251A		0xac1d
+#define PCI_DEVICE_ID_TI_1211		0xac1e
+#define PCI_DEVICE_ID_TI_1251B		0xac1f
+#define PCI_DEVICE_ID_TI_4410		0xac41
+#define PCI_DEVICE_ID_TI_4451		0xac42
+#define PCI_DEVICE_ID_TI_4510		0xac44
+#define PCI_DEVICE_ID_TI_4520		0xac46
+#define PCI_DEVICE_ID_TI_7510		0xac47
+#define PCI_DEVICE_ID_TI_7610		0xac48
+#define PCI_DEVICE_ID_TI_7410		0xac49
+#define PCI_DEVICE_ID_TI_1410		0xac50
+#define PCI_DEVICE_ID_TI_1420		0xac51
+#define PCI_DEVICE_ID_TI_1451A		0xac52
+#define PCI_DEVICE_ID_TI_1620		0xac54
+#define PCI_DEVICE_ID_TI_1520		0xac55
+#define PCI_DEVICE_ID_TI_1510		0xac56
+#define PCI_DEVICE_ID_TI_X620		0xac8d
+#define PCI_DEVICE_ID_TI_X420		0xac8e
+#define PCI_DEVICE_ID_TI_XX20_FM	0xac8f
+
+#define PCI_VENDOR_ID_SONY		0x104d
+
+/* Winbond have two vendor IDs! See 0x10ad as well */
+#define PCI_VENDOR_ID_WINBOND2		0x1050
+#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
+
+#define PCI_VENDOR_ID_ANIGMA		0x1051
+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
+
+#define PCI_VENDOR_ID_EFAR		0x1055
+#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
+#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
+
+#define PCI_VENDOR_ID_MOTOROLA		0x1057
+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
+#define PCI_DEVICE_ID_MOTOROLA_MPC107	0x0004
+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
+#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
+#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
+#define PCI_DEVICE_ID_MOTOROLA_HARRIER	0x480b
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200	0x5803
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200B	0x5809
+
+#define PCI_VENDOR_ID_PROMISE		0x105a
+#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
+#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
+#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
+#define PCI_DEVICE_ID_PROMISE_20263	0x0D38
+#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
+#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
+#define PCI_DEVICE_ID_PROMISE_20270	0x6268
+#define PCI_DEVICE_ID_PROMISE_20271	0x6269
+#define PCI_DEVICE_ID_PROMISE_20275	0x1275
+#define PCI_DEVICE_ID_PROMISE_20276	0x5275
+#define PCI_DEVICE_ID_PROMISE_20277	0x7275
+
+#define PCI_VENDOR_ID_FOXCONN		0x105b
+
+#define PCI_VENDOR_ID_UMC		0x1060
+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
+
+#define PCI_VENDOR_ID_PICOPOWER		0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523	0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP	0x8002
+
+#define PCI_VENDOR_ID_MYLEX		0x1069
+#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
+#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
+#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
+#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
+#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
+#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM	0xB166
+
+#define PCI_VENDOR_ID_APPLE		0x106b
+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
+#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP	0x0024
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P	0x0027
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15	0x002d
+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15	0x002e
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2	0x0032
+#define PCI_DEVICE_ID_APPLE_UNI_N_ATA	0x0033
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2	0x0034
+#define PCI_DEVICE_ID_APPLE_IPID_ATA100	0x003b
+#define PCI_DEVICE_ID_APPLE_K2_ATA100	0x0043
+#define PCI_DEVICE_ID_APPLE_U3_AGP	0x004b
+#define PCI_DEVICE_ID_APPLE_K2_GMAC	0x004c
+#define PCI_DEVICE_ID_APPLE_SH_ATA      0x0050
+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM   0x0051
+#define PCI_DEVICE_ID_APPLE_U3L_AGP	0x0058
+#define PCI_DEVICE_ID_APPLE_U3H_AGP	0x0059
+#define PCI_DEVICE_ID_APPLE_U4_PCIE	0x005b
+#define PCI_DEVICE_ID_APPLE_IPID2_AGP	0x0066
+#define PCI_DEVICE_ID_APPLE_IPID2_ATA	0x0069
+#define PCI_DEVICE_ID_APPLE_IPID2_FW	0x006a
+#define PCI_DEVICE_ID_APPLE_IPID2_GMAC	0x006b
+#define PCI_DEVICE_ID_APPLE_TIGON3	0x1645
+
+#define PCI_VENDOR_ID_YAMAHA		0x1073
+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
+
+#define PCI_VENDOR_ID_QLOGIC		0x1077
+#define PCI_DEVICE_ID_QLOGIC_ISP10160	0x1016
+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
+#define PCI_DEVICE_ID_QLOGIC_ISP1080	0x1080
+#define PCI_DEVICE_ID_QLOGIC_ISP12160	0x1216
+#define PCI_DEVICE_ID_QLOGIC_ISP1240	0x1240
+#define PCI_DEVICE_ID_QLOGIC_ISP1280	0x1280
+#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
+#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
+#define PCI_DEVICE_ID_QLOGIC_ISP2300	0x2300
+#define PCI_DEVICE_ID_QLOGIC_ISP2312	0x2312
+#define PCI_DEVICE_ID_QLOGIC_ISP2322	0x2322
+#define PCI_DEVICE_ID_QLOGIC_ISP6312	0x6312
+#define PCI_DEVICE_ID_QLOGIC_ISP6322	0x6322
+#define PCI_DEVICE_ID_QLOGIC_ISP2422	0x2422
+#define PCI_DEVICE_ID_QLOGIC_ISP2432	0x2432
+#define PCI_DEVICE_ID_QLOGIC_ISP2512	0x2512
+#define PCI_DEVICE_ID_QLOGIC_ISP2522	0x2522
+#define PCI_DEVICE_ID_QLOGIC_ISP5422	0x5422
+#define PCI_DEVICE_ID_QLOGIC_ISP5432	0x5432
+
+#define PCI_VENDOR_ID_CYRIX		0x1078
+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
+
+#define PCI_VENDOR_ID_CONTAQ		0x1080
+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
+
+#define PCI_VENDOR_ID_OLICOM		0x108d
+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+
+#define PCI_VENDOR_ID_SUN		0x108e
+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
+#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
+#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
+#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
+#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
+#define PCI_DEVICE_ID_SUN_GEM		0x2bad
+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
+#define PCI_DEVICE_ID_SUN_PBM		0x8000
+#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
+#define PCI_DEVICE_ID_SUN_TOMATILLO	0xa801
+#define PCI_DEVICE_ID_SUN_CASSINI	0xabba
+
+#define PCI_VENDOR_ID_NI		0x1093
+#define PCI_DEVICE_ID_NI_PCI2322	0xd130
+#define PCI_DEVICE_ID_NI_PCI2324	0xd140
+#define PCI_DEVICE_ID_NI_PCI2328	0xd150
+#define PCI_DEVICE_ID_NI_PXI8422_2322	0xd190
+#define PCI_DEVICE_ID_NI_PXI8422_2324	0xd1a0
+#define PCI_DEVICE_ID_NI_PXI8420_2322	0xd1d0
+#define PCI_DEVICE_ID_NI_PXI8420_2324	0xd1e0
+#define PCI_DEVICE_ID_NI_PXI8420_2328	0xd1f0
+#define PCI_DEVICE_ID_NI_PXI8420_23216	0xd1f1
+#define PCI_DEVICE_ID_NI_PCI2322I	0xd250
+#define PCI_DEVICE_ID_NI_PCI2324I	0xd270
+#define PCI_DEVICE_ID_NI_PCI23216	0xd2b0
+#define PCI_DEVICE_ID_NI_PXI8430_2322	0x7080
+#define PCI_DEVICE_ID_NI_PCI8430_2322	0x70db
+#define PCI_DEVICE_ID_NI_PXI8430_2324	0x70dd
+#define PCI_DEVICE_ID_NI_PCI8430_2324	0x70df
+#define PCI_DEVICE_ID_NI_PXI8430_2328	0x70e2
+#define PCI_DEVICE_ID_NI_PCI8430_2328	0x70e4
+#define PCI_DEVICE_ID_NI_PXI8430_23216	0x70e6
+#define PCI_DEVICE_ID_NI_PCI8430_23216	0x70e7
+#define PCI_DEVICE_ID_NI_PXI8432_2322	0x70e8
+#define PCI_DEVICE_ID_NI_PCI8432_2322	0x70ea
+#define PCI_DEVICE_ID_NI_PXI8432_2324	0x70ec
+#define PCI_DEVICE_ID_NI_PCI8432_2324	0x70ee
+
+#define PCI_VENDOR_ID_CMD		0x1095
+#define PCI_DEVICE_ID_CMD_643		0x0643
+#define PCI_DEVICE_ID_CMD_646		0x0646
+#define PCI_DEVICE_ID_CMD_648		0x0648
+#define PCI_DEVICE_ID_CMD_649		0x0649
+
+#define PCI_DEVICE_ID_SII_680		0x0680
+#define PCI_DEVICE_ID_SII_3112		0x3112
+#define PCI_DEVICE_ID_SII_1210SA	0x0240
+
+#define PCI_VENDOR_ID_BROOKTREE		0x109e
+#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
+#define PCI_DEVICE_ID_BROOKTREE_879	0x0879
+
+#define PCI_VENDOR_ID_SGI		0x10a9
+#define PCI_DEVICE_ID_SGI_IOC3		0x0003
+#define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
+#define PCI_DEVICE_ID_SGI_IOC4		0x100a
+
+#define PCI_VENDOR_ID_WINBOND		0x10ad
+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+
+#define PCI_VENDOR_ID_PLX		0x10b5
+#define PCI_DEVICE_ID_PLX_R685		0x1030
+#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
+#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
+#define PCI_DEVICE_ID_PLX_1077		0x1077
+#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
+#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
+#define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_OLITEC	0x1187
+#define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
+#define PCI_DEVICE_ID_PLX_9030          0x9030
+#define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9056		0x9056
+#define PCI_DEVICE_ID_PLX_9080		0x9080
+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
+
+#define PCI_VENDOR_ID_MADGE		0x10b6
+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
+
+#define PCI_VENDOR_ID_3COM		0x10b7
+#define PCI_DEVICE_ID_3COM_3C985	0x0001
+#define PCI_DEVICE_ID_3COM_3C940	0x1700
+#define PCI_DEVICE_ID_3COM_3C339	0x3390
+#define PCI_DEVICE_ID_3COM_3C359	0x3590
+#define PCI_DEVICE_ID_3COM_3C940B	0x80eb
+#define PCI_DEVICE_ID_3COM_3CR990	0x9900
+#define PCI_DEVICE_ID_3COM_3CR990_TX_95	0x9902
+#define PCI_DEVICE_ID_3COM_3CR990_TX_97	0x9903
+#define PCI_DEVICE_ID_3COM_3CR990B	0x9904
+#define PCI_DEVICE_ID_3COM_3CR990_FX	0x9905
+#define PCI_DEVICE_ID_3COM_3CR990SVR95	0x9908
+#define PCI_DEVICE_ID_3COM_3CR990SVR97	0x9909
+#define PCI_DEVICE_ID_3COM_3CR990SVR	0x990a
+
+#define PCI_VENDOR_ID_AL		0x10b9
+#define PCI_DEVICE_ID_AL_M1533		0x1533
+#define PCI_DEVICE_ID_AL_M1535		0x1535
+#define PCI_DEVICE_ID_AL_M1541		0x1541
+#define PCI_DEVICE_ID_AL_M1563		0x1563
+#define PCI_DEVICE_ID_AL_M1621		0x1621
+#define PCI_DEVICE_ID_AL_M1631		0x1631
+#define PCI_DEVICE_ID_AL_M1632		0x1632
+#define PCI_DEVICE_ID_AL_M1641		0x1641
+#define PCI_DEVICE_ID_AL_M1644		0x1644
+#define PCI_DEVICE_ID_AL_M1647		0x1647
+#define PCI_DEVICE_ID_AL_M1651		0x1651
+#define PCI_DEVICE_ID_AL_M1671		0x1671
+#define PCI_DEVICE_ID_AL_M1681		0x1681
+#define PCI_DEVICE_ID_AL_M1683		0x1683
+#define PCI_DEVICE_ID_AL_M1689		0x1689
+#define PCI_DEVICE_ID_AL_M5219		0x5219
+#define PCI_DEVICE_ID_AL_M5228		0x5228
+#define PCI_DEVICE_ID_AL_M5229		0x5229
+#define PCI_DEVICE_ID_AL_M5451		0x5451
+#define PCI_DEVICE_ID_AL_M7101		0x7101
+
+#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
+#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
+#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
+#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
+
+#define PCI_VENDOR_ID_TCONRAD		0x10da
+#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
+
+#define PCI_VENDOR_ID_NVIDIA			0x10de
+#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
+#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
+#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN        0x002a
+#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
+#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS	0x0034
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE    0x0042
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT    0x0045
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000     0x004E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS	0x0052
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
+#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE		0x005d
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
+#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM		0x0069
+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
+#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM	0x0089
+#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO		0x008a
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT   0x0090
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX	0x0091
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800   0x0098
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099
+#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
+#define PCI_DEVICE_ID_GEFORCE_6800A             0x00c1
+#define PCI_DEVICE_ID_GEFORCE_6800A_LE          0x00c2
+#define PCI_DEVICE_ID_GEFORCE_GO_6800           0x00c8
+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA     0x00c9
+#define PCI_DEVICE_ID_QUADRO_FX_GO1400          0x00cc
+#define PCI_DEVICE_ID_QUADRO_FX_1400            0x00ce
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
+#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM		0x00d9
+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
+#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO		0x00ea
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT   0x00f9
+#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280	0x00fd
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
+#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO	0x0112
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT	0x0140
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600	0x0141
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL	0x0145
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540	0x014E
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200	0x014F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200    0x0164
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250    0x0166
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1  0x0167
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1  0x0168
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460	0x0170
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440	0x0171
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420	0x0172
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE	0x0173
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO	0x0174
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO	0x0175
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO    0x0177
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL	0x0178
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200	0x017A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL	0x017B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL	0x017C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000   0x0185
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO    0x0186
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO    0x0187
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL    0x0188
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC    0x0189
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS    0x018A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL    0x018B
+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2		0x01a0
+#define PCI_DEVICE_ID_NVIDIA_NFORCE		0x01a4
+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO		0x01b1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
+#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM		0x01c1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2		0x0202
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC		0x0203
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B      0x0211
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE   0x0212
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT   0x0215
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600	0x0250
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400	0x0251
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200	0x0253
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS	0x0264
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS	0x0368
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x037E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2	0x037F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO       0x0286
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL        0x0288
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL        0x0289
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL       0x028C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA  0x0301
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800        0x0302
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000         0x0308
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000         0x0309
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA  0x0311
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600        0x0312
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE      0x0314
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600      0x031A
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650      0x031B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700        0x031C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200        0x0320
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA  0x0321
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1      0x0322
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE      0x0323
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200      0x0324
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250      0x0325
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500        0x0326
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100        0x0327
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32   0x0328
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200	    0x0329
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI     0x032A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500          0x032B
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300      0x032C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100      0x032D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA  0x0330
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900        0x0331
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT      0x0332
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA  0x0333
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT      0x0334
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000         0x0338
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700          0x033F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA  0x0341
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700        0x0342
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE      0x0343
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE      0x0344
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1    0x0347
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
+#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0	    0x0360
+#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4	    0x0364
+#define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA      0x03E7
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS	    0x03EB
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE       0x03EC
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2     0x03F6
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3     0x03F7
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS	    0x0446
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE	    0x0448
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS     0x0542
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE       0x0560
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE       0x056C
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS    0x0752
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
+
+#define PCI_VENDOR_ID_IMS		0x10e0
+#define PCI_DEVICE_ID_IMS_TT128		0x9128
+#define PCI_DEVICE_ID_IMS_TT3D		0x9135
+
+#define PCI_VENDOR_ID_INTERG		0x10ea
+#define PCI_DEVICE_ID_INTERG_1682	0x1682
+#define PCI_DEVICE_ID_INTERG_2000	0x2000
+#define PCI_DEVICE_ID_INTERG_2010	0x2010
+#define PCI_DEVICE_ID_INTERG_5000	0x5000
+#define PCI_DEVICE_ID_INTERG_5050	0x5050
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+
+#define PCI_VENDOR_ID_XILINX		0x10ee
+#define PCI_DEVICE_ID_RME_DIGI96	0x3fc0
+#define PCI_DEVICE_ID_RME_DIGI96_8	0x3fc1
+#define PCI_DEVICE_ID_RME_DIGI96_8_PRO	0x3fc2
+#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
+#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
+#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
+
+#define PCI_VENDOR_ID_INIT		0x1101
+
+#define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
+#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
+#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
+#define PCI_SUBDEVICE_ID_CREATIVE_SB1270	0x0062
+#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
+
+#define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
+#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
+
+#define PCI_VENDOR_ID_TTI		0x1103
+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
+#define PCI_DEVICE_ID_TTI_HPT366	0x0004
+#define PCI_DEVICE_ID_TTI_HPT372	0x0005
+#define PCI_DEVICE_ID_TTI_HPT302	0x0006
+#define PCI_DEVICE_ID_TTI_HPT371	0x0007
+#define PCI_DEVICE_ID_TTI_HPT374	0x0008
+#define PCI_DEVICE_ID_TTI_HPT372N	0x0009	/* apparently a 372N variant? */
+
+#define PCI_VENDOR_ID_VIA		0x1106
+#define PCI_DEVICE_ID_VIA_8763_0	0x0198
+#define PCI_DEVICE_ID_VIA_8380_0	0x0204
+#define PCI_DEVICE_ID_VIA_3238_0	0x0238
+#define PCI_DEVICE_ID_VIA_PT880		0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA	0x0308
+#define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
+#define PCI_DEVICE_ID_VIA_3269_0	0x0269
+#define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
+#define PCI_DEVICE_ID_VIA_3296_0	0x0296
+#define PCI_DEVICE_ID_VIA_8363_0	0x0305
+#define PCI_DEVICE_ID_VIA_P4M800CE	0x0314
+#define PCI_DEVICE_ID_VIA_P4M890	0x0327
+#define PCI_DEVICE_ID_VIA_VT3324	0x0324
+#define PCI_DEVICE_ID_VIA_VT3336	0x0336
+#define PCI_DEVICE_ID_VIA_VT3351	0x0351
+#define PCI_DEVICE_ID_VIA_VT3364	0x0364
+#define PCI_DEVICE_ID_VIA_8371_0	0x0391
+#define PCI_DEVICE_ID_VIA_6415		0x0415
+#define PCI_DEVICE_ID_VIA_8501_0	0x0501
+#define PCI_DEVICE_ID_VIA_82C561	0x0561
+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
+#define PCI_DEVICE_ID_VIA_82C576	0x0576
+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
+#define PCI_DEVICE_ID_VIA_82C596	0x0596
+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
+#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
+#define PCI_DEVICE_ID_VIA_8601_0	0x0601
+#define PCI_DEVICE_ID_VIA_8605_0	0x0605
+#define PCI_DEVICE_ID_VIA_82C686	0x0686
+#define PCI_DEVICE_ID_VIA_82C691_0	0x0691
+#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
+#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
+#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
+#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
+#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
+#define PCI_DEVICE_ID_VIA_8233_5	0x3059
+#define PCI_DEVICE_ID_VIA_8233_0	0x3074
+#define PCI_DEVICE_ID_VIA_8633_0	0x3091
+#define PCI_DEVICE_ID_VIA_8367_0	0x3099
+#define PCI_DEVICE_ID_VIA_8653_0	0x3101
+#define PCI_DEVICE_ID_VIA_8622		0x3102
+#define PCI_DEVICE_ID_VIA_8235_USB_2	0x3104
+#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
+#define PCI_DEVICE_ID_VIA_8361		0x3112
+#define PCI_DEVICE_ID_VIA_XM266		0x3116
+#define PCI_DEVICE_ID_VIA_612X		0x3119
+#define PCI_DEVICE_ID_VIA_862X_0	0x3123
+#define PCI_DEVICE_ID_VIA_8753_0	0x3128
+#define PCI_DEVICE_ID_VIA_8233A		0x3147
+#define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
+#define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
+#define PCI_DEVICE_ID_VIA_XN266		0x3156
+#define PCI_DEVICE_ID_VIA_6410		0x3164
+#define PCI_DEVICE_ID_VIA_8754C_0	0x3168
+#define PCI_DEVICE_ID_VIA_8235		0x3177
+#define PCI_DEVICE_ID_VIA_8385_0	0x3188
+#define PCI_DEVICE_ID_VIA_8377_0	0x3189
+#define PCI_DEVICE_ID_VIA_8378_0	0x3205
+#define PCI_DEVICE_ID_VIA_8783_0	0x3208
+#define PCI_DEVICE_ID_VIA_8237		0x3227
+#define PCI_DEVICE_ID_VIA_8251		0x3287
+#define PCI_DEVICE_ID_VIA_8261		0x3402
+#define PCI_DEVICE_ID_VIA_8237A		0x3337
+#define PCI_DEVICE_ID_VIA_8237S		0x3372
+#define PCI_DEVICE_ID_VIA_SATA_EIDE	0x5324
+#define PCI_DEVICE_ID_VIA_8231		0x8231
+#define PCI_DEVICE_ID_VIA_8231_4	0x8235
+#define PCI_DEVICE_ID_VIA_8365_1	0x8305
+#define PCI_DEVICE_ID_VIA_CX700		0x8324
+#define PCI_DEVICE_ID_VIA_CX700_IDE	0x0581
+#define PCI_DEVICE_ID_VIA_VX800		0x8353
+#define PCI_DEVICE_ID_VIA_VX855		0x8409
+#define PCI_DEVICE_ID_VIA_8371_1	0x8391
+#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
+#define PCI_DEVICE_ID_VIA_838X_1	0xB188
+#define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
+#define PCI_DEVICE_ID_VIA_VX855_IDE	0xC409
+#define PCI_DEVICE_ID_VIA_ANON		0xFFFF
+
+#define PCI_VENDOR_ID_SIEMENS           0x110A
+#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
+
+#define PCI_VENDOR_ID_VORTEX		0x1119
+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
+
+#define PCI_VENDOR_ID_EF		0x111a
+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
+#define PCI_DEVICE_ID_EF_ATM_LANAI2	0x0003
+#define PCI_DEVICE_ID_EF_ATM_LANAIHB	0x0005
+
+#define PCI_VENDOR_ID_IDT		0x111d
+#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
+
+#define PCI_VENDOR_ID_FORE		0x1127
+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
+
+#define PCI_VENDOR_ID_PHILIPS		0x1131
+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
+#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
+
+#define PCI_VENDOR_ID_EICON		0x1133
+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
+#define PCI_DEVICE_ID_EICON_DIVA202	0xe00b
+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
+
+#define PCI_VENDOR_ID_CISCO		0x1137
+
+#define PCI_VENDOR_ID_ZIATECH		0x1138
+#define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
+
+
+#define PCI_VENDOR_ID_SYSKONNECT	0x1148
+#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
+#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
+#define PCI_DEVICE_ID_SYSKONNECT_YU	0x4320
+#define PCI_DEVICE_ID_SYSKONNECT_9DXX	0x4400
+#define PCI_DEVICE_ID_SYSKONNECT_9MXX	0x4500
+
+#define PCI_VENDOR_ID_DIGI		0x114f
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
+#define PCI_DEVICE_ID_DIGI_NEO_8	0x00B1
+#define PCI_DEVICE_ID_NEO_2DB9          0x00C8
+#define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
+#define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
+#define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
+#define PCIE_DEVICE_ID_NEO_4_IBM        0x00F4
+
+#define PCI_VENDOR_ID_XIRCOM		0x115d
+#define PCI_DEVICE_ID_XIRCOM_RBM56G	0x0101
+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
+
+#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
+#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
+#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB	0x0036
+#define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
+#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE	0x0132
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
+#define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408
+
+#define PCI_VENDOR_ID_SBE		0x1176
+#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
+#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
+#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
+#define PCI_SUBDEVICE_ID_SBE_T3E3	0x0009
+#define PCI_SUBDEVICE_ID_SBE_2T3E3_P0	0x0901
+#define PCI_SUBDEVICE_ID_SBE_2T3E3_P1	0x0902
+
+#define PCI_VENDOR_ID_TOSHIBA		0x1179
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0101
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0102
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3	0x0103
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
+
+#define PCI_VENDOR_ID_TOSHIBA_2		0x102f
+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU	0x0031
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939	0x0032
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
+#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
+
+#define PCI_VENDOR_ID_ATTO		0x117c
+
+#define PCI_VENDOR_ID_RICOH		0x1180
+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
+#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
+#define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE823	0xe823
+#define PCI_DEVICE_ID_RICOH_R5C832	0x0832
+#define PCI_DEVICE_ID_RICOH_R5C843	0x0843
+
+#define PCI_VENDOR_ID_DLINK		0x1186
+#define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
+
+#define PCI_VENDOR_ID_ARTOP		0x1191
+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
+#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
+#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
+#define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
+#define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
+#define PCI_DEVICE_ID_ARTOP_ATP867A	0x000A
+#define PCI_DEVICE_ID_ARTOP_ATP867B	0x000B
+#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
+#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
+#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
+#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
+#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
+#define PCI_DEVICE_ID_ARTOP_8060	0x8060
+
+#define PCI_VENDOR_ID_ZEITNET		0x1193
+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
+
+#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
+#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
+#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
+
+#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
+
+#define PCI_VENDOR_ID_MARVELL		0x11ab
+#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
+#define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
+#define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
+#define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
+#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND	0x4100
+#define PCI_DEVICE_ID_MARVELL_88ALP01_SD	0x4101
+#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC	0x4102
+
+#define PCI_VENDOR_ID_V3		0x11b0
+#define PCI_DEVICE_ID_V3_V960		0x0001
+#define PCI_DEVICE_ID_V3_V351		0x0002
+
+#define PCI_VENDOR_ID_ATT		0x11c1
+#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
+
+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
+
+#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
+#define PCI_DEVICE_ID_AD1889JS		0x1889
+
+#define PCI_DEVICE_ID_SEGA_BBA		0x1234
+
+#define PCI_VENDOR_ID_ZORAN		0x11de
+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
+
+#define PCI_VENDOR_ID_COMPEX		0x11f6
+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
+
+#define PCI_VENDOR_ID_PMC_Sierra	0x11f8
+
+#define PCI_VENDOR_ID_RP		0x11fe
+#define PCI_DEVICE_ID_RP32INTF		0x0001
+#define PCI_DEVICE_ID_RP8INTF		0x0002
+#define PCI_DEVICE_ID_RP16INTF		0x0003
+#define PCI_DEVICE_ID_RP4QUAD		0x0004
+#define PCI_DEVICE_ID_RP8OCTA		0x0005
+#define PCI_DEVICE_ID_RP8J		0x0006
+#define PCI_DEVICE_ID_RP4J		0x0007
+#define PCI_DEVICE_ID_RP8SNI		0x0008
+#define PCI_DEVICE_ID_RP16SNI		0x0009
+#define PCI_DEVICE_ID_RPP4		0x000A
+#define PCI_DEVICE_ID_RPP8		0x000B
+#define PCI_DEVICE_ID_RP4M		0x000D
+#define PCI_DEVICE_ID_RP2_232		0x000E
+#define PCI_DEVICE_ID_RP2_422		0x000F
+#define PCI_DEVICE_ID_URP32INTF		0x0801
+#define PCI_DEVICE_ID_URP8INTF		0x0802
+#define PCI_DEVICE_ID_URP16INTF		0x0803
+#define PCI_DEVICE_ID_URP8OCTA		0x0805
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C
+#define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
+#define PCI_DEVICE_ID_CRP16INTF		0x0903
+
+#define PCI_VENDOR_ID_CYCLADES		0x120e
+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
+#define PCI_DEVICE_ID_PC300_RX_2	0x0300
+#define PCI_DEVICE_ID_PC300_RX_1	0x0301
+#define PCI_DEVICE_ID_PC300_TE_2	0x0310
+#define PCI_DEVICE_ID_PC300_TE_1	0x0311
+#define PCI_DEVICE_ID_PC300_TE_M_2	0x0320
+#define PCI_DEVICE_ID_PC300_TE_M_1	0x0321
+
+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
+
+#define PCI_VENDOR_ID_O2		0x1217
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#define PCI_DEVICE_ID_O2_6836		0x6836
+#define PCI_DEVICE_ID_O2_6812		0x6872
+#define PCI_DEVICE_ID_O2_6933		0x6933
+#define PCI_DEVICE_ID_O2_8120		0x8120
+#define PCI_DEVICE_ID_O2_8220		0x8220
+#define PCI_DEVICE_ID_O2_8221		0x8221
+#define PCI_DEVICE_ID_O2_8320		0x8320
+#define PCI_DEVICE_ID_O2_8321		0x8321
+
+#define PCI_VENDOR_ID_3DFX		0x121a
+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
+#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
+#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
+#define PCI_DEVICE_ID_3DFX_VOODOO5	0x0009
+
+#define PCI_VENDOR_ID_AVM		0x1244
+#define PCI_DEVICE_ID_AVM_B1		0x0700
+#define PCI_DEVICE_ID_AVM_C4		0x0800
+#define PCI_DEVICE_ID_AVM_A1		0x0a00
+#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
+#define PCI_DEVICE_ID_AVM_C2		0x1100
+#define PCI_DEVICE_ID_AVM_T1		0x1200
+
+#define PCI_VENDOR_ID_STALLION		0x124d
+
+/* Allied Telesyn */
+#define PCI_VENDOR_ID_AT		0x1259
+#define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
+
+#define PCI_VENDOR_ID_ESS		0x125d
+#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
+#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
+#define PCI_DEVICE_ID_ESS_ALLEGRO_1	0x1988
+#define PCI_DEVICE_ID_ESS_ALLEGRO	0x1989
+#define PCI_DEVICE_ID_ESS_CANYON3D_2LE	0x1990
+#define PCI_DEVICE_ID_ESS_CANYON3D_2	0x1992
+#define PCI_DEVICE_ID_ESS_MAESTRO3	0x1998
+#define PCI_DEVICE_ID_ESS_MAESTRO3_1	0x1999
+#define PCI_DEVICE_ID_ESS_MAESTRO3_HW	0x199a
+#define PCI_DEVICE_ID_ESS_MAESTRO3_2	0x199b
+
+#define PCI_VENDOR_ID_SATSAGEM		0x1267
+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
+
+#define PCI_VENDOR_ID_ENSONIQ		0x1274
+#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
+#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
+#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
+
+#define PCI_VENDOR_ID_TRANSMETA		0x1279
+#define PCI_DEVICE_ID_EFFICEON		0x0060
+
+#define PCI_VENDOR_ID_ROCKWELL		0x127A
+
+#define PCI_VENDOR_ID_ITE		0x1283
+#define PCI_DEVICE_ID_ITE_8172		0x8172
+#define PCI_DEVICE_ID_ITE_8211		0x8211
+#define PCI_DEVICE_ID_ITE_8212		0x8212
+#define PCI_DEVICE_ID_ITE_8213		0x8213
+#define PCI_DEVICE_ID_ITE_8152		0x8152
+#define PCI_DEVICE_ID_ITE_8872		0x8872
+#define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
+
+/* formerly Platform Tech */
+#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
+
+#define PCI_VENDOR_ID_ALTEON		0x12ae
+
+#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ		0x000C
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM		0x000D
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI		0x0100
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2		0x0201
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4		0x0202
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232	0x0300
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232	0x0301
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232	0x0302
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1	0x0310
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2	0x0311
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4	0x0312
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2	0x0320
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4	0x0321
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8	0x0322
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485	0x0330
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485	0x0331
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485	0x0332
+
+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
+
+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
+
+#define PCI_VENDOR_ID_AUREAL		0x12eb
+#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
+#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE	0x0003
+
+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
+#define PCI_DEVICE_ID_LML_33R10		0x8a02
+
+#define PCI_VENDOR_ID_ESDGMBH		0x12fe
+#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+
+#define PCI_VENDOR_ID_SIIG		0x131f
+#define PCI_SUBVENDOR_ID_SIIG		0x131f
+#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
+#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
+#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
+#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
+#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
+#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
+#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
+#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
+#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
+#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
+#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
+#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
+#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
+#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
+#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
+#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
+#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
+#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
+#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
+#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
+#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
+#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
+#define PCI_DEVICE_ID_SIIG_8S_20x_550	0x2080
+#define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
+#define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
+#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
+
+#define PCI_VENDOR_ID_RADISYS		0x1331
+
+#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
+#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
+#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
+#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
+
+#define PCI_VENDOR_ID_DOMEX		0x134a
+#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
+
+#define PCI_VENDOR_ID_INTASHIELD	0x135a
+#define PCI_DEVICE_ID_INTASHIELD_IS200	0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400	0x0dc0
+
+#define PCI_VENDOR_ID_QUATECH		0x135C
+#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
+#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
+#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
+#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
+#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
+
+#define PCI_VENDOR_ID_SEALEVEL		0x135e
+#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
+#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
+#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
+#define PCI_DEVICE_ID_SEALEVEL_7803	0x7803
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8	0x7804
+
+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
+
+#define PCI_VENDOR_ID_DIGIGRAM		0x1369
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
+
+#define PCI_VENDOR_ID_KAWASAKI		0x136b
+#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
+
+#define PCI_VENDOR_ID_CNET		0x1371
+#define PCI_DEVICE_ID_CNET_GIGACARD	0x434e
+
+#define PCI_VENDOR_ID_LMC		0x1376
+#define PCI_DEVICE_ID_LMC_HSSI		0x0003
+#define PCI_DEVICE_ID_LMC_DS3		0x0004
+#define PCI_DEVICE_ID_LMC_SSI		0x0005
+#define PCI_DEVICE_ID_LMC_T1		0x0006
+
+#define PCI_VENDOR_ID_NETGEAR		0x1385
+#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
+
+#define PCI_VENDOR_ID_APPLICOM		0x1389
+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
+
+#define PCI_VENDOR_ID_MOXA		0x1393
+#define PCI_DEVICE_ID_MOXA_RC7000	0x0001
+#define PCI_DEVICE_ID_MOXA_CP102	0x1020
+#define PCI_DEVICE_ID_MOXA_CP102UL	0x1021
+#define PCI_DEVICE_ID_MOXA_CP102U	0x1022
+#define PCI_DEVICE_ID_MOXA_C104		0x1040
+#define PCI_DEVICE_ID_MOXA_CP104U	0x1041
+#define PCI_DEVICE_ID_MOXA_CP104JU	0x1042
+#define PCI_DEVICE_ID_MOXA_CP104EL	0x1043
+#define PCI_DEVICE_ID_MOXA_CT114	0x1140
+#define PCI_DEVICE_ID_MOXA_CP114	0x1141
+#define PCI_DEVICE_ID_MOXA_CP118U	0x1180
+#define PCI_DEVICE_ID_MOXA_CP118EL	0x1181
+#define PCI_DEVICE_ID_MOXA_CP132	0x1320
+#define PCI_DEVICE_ID_MOXA_CP132U	0x1321
+#define PCI_DEVICE_ID_MOXA_CP134U	0x1340
+#define PCI_DEVICE_ID_MOXA_C168		0x1680
+#define PCI_DEVICE_ID_MOXA_CP168U	0x1681
+#define PCI_DEVICE_ID_MOXA_CP168EL	0x1682
+#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
+#define PCI_DEVICE_ID_MOXA_C218		0x2180
+#define PCI_DEVICE_ID_MOXA_C320		0x3200
+
+#define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
+#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
+#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
+#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
+#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
+#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
+#define PCI_DEVICE_ID_CCD_B000		0xb000
+#define PCI_DEVICE_ID_CCD_B006		0xb006
+#define PCI_DEVICE_ID_CCD_B007		0xb007
+#define PCI_DEVICE_ID_CCD_B008		0xb008
+#define PCI_DEVICE_ID_CCD_B009		0xb009
+#define PCI_DEVICE_ID_CCD_B00A		0xb00a
+#define PCI_DEVICE_ID_CCD_B00B		0xb00b
+#define PCI_DEVICE_ID_CCD_B00C		0xb00c
+#define PCI_DEVICE_ID_CCD_B100		0xb100
+#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
+#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
+#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
+#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
+#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_JHSE1	0xB553
+#define PCI_SUBDEVICE_ID_CCD_JH8S	0xB55B
+#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
+#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
+#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
+#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
+#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
+#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
+#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
+#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
+#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
+#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
+#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
+#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
+#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
+#define PCI_DEVICE_ID_CCD_B700		0xb700
+#define PCI_DEVICE_ID_CCD_B701		0xb701
+#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
+#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
+#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
+#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
+
+#define PCI_VENDOR_ID_EXAR		0x13a8
+#define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
+#define PCI_DEVICE_ID_EXAR_XR17C154	0x0154
+#define PCI_DEVICE_ID_EXAR_XR17C158	0x0158
+
+#define PCI_VENDOR_ID_MICROGATE		0x13c0
+#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
+#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
+
+#define PCI_VENDOR_ID_3WARE		0x13C1
+#define PCI_DEVICE_ID_3WARE_1000	0x1000
+#define PCI_DEVICE_ID_3WARE_7000	0x1001
+#define PCI_DEVICE_ID_3WARE_9000	0x1002
+
+#define PCI_VENDOR_ID_IOMEGA		0x13ca
+#define PCI_DEVICE_ID_IOMEGA_BUZ	0x4231
+
+#define PCI_VENDOR_ID_ABOCOM		0x13D1
+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
+
+#define PCI_VENDOR_ID_SUNDANCE		0x13f0
+
+#define PCI_VENDOR_ID_CMEDIA		0x13f6
+#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
+#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
+#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
+#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
+
+#define PCI_VENDOR_ID_LAVA		0x1407
+#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
+#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_A	0x0120 /* 2x 16550A, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_B	0x0121 /* 2x 16550A, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_A	0x0180 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_B	0x0181 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
+#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
+#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
+#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
+
+#define PCI_VENDOR_ID_TIMEDIA		0x1409
+#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
+
+#define PCI_VENDOR_ID_ICE		0x1412
+#define PCI_DEVICE_ID_ICE_1712		0x1712
+#define PCI_DEVICE_ID_VT1724		0x1724
+
+#define PCI_VENDOR_ID_OXSEMI		0x1415
+#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
+#define PCI_DEVICE_ID_OXSEMI_PCIe840		0xC000
+#define PCI_DEVICE_ID_OXSEMI_PCIe840_G		0xC004
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0		0xC100
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G	0xC104
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1		0xC110
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G	0xC114
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
+#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
+#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
+#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
+#define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
+
+#define PCI_VENDOR_ID_CHELSIO		0x1425
+
+#define PCI_VENDOR_ID_SAMSUNG		0x144d
+
+#define PCI_VENDOR_ID_GIGABYTE		0x1458
+
+#define PCI_VENDOR_ID_AMBIT		0x1468
+
+#define PCI_VENDOR_ID_MYRICOM		0x14c1
+
+#define PCI_VENDOR_ID_TITAN		0x14D2
+#define PCI_DEVICE_ID_TITAN_010L	0x8001
+#define PCI_DEVICE_ID_TITAN_100L	0x8010
+#define PCI_DEVICE_ID_TITAN_110L	0x8011
+#define PCI_DEVICE_ID_TITAN_200L	0x8020
+#define PCI_DEVICE_ID_TITAN_210L	0x8021
+#define PCI_DEVICE_ID_TITAN_400L	0x8040
+#define PCI_DEVICE_ID_TITAN_800L	0x8080
+#define PCI_DEVICE_ID_TITAN_100		0xA001
+#define PCI_DEVICE_ID_TITAN_200		0xA005
+#define PCI_DEVICE_ID_TITAN_400		0xA003
+#define PCI_DEVICE_ID_TITAN_800B	0xA004
+
+#define PCI_VENDOR_ID_PANACOM		0x14d4
+#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
+#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
+
+#define PCI_VENDOR_ID_SIPACKETS		0x14d9
+#define PCI_DEVICE_ID_SP1011		0x0010
+
+#define PCI_VENDOR_ID_AFAVLAB		0x14db
+#define PCI_DEVICE_ID_AFAVLAB_P028	0x2180
+#define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
+#define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
+
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
+#define PCI_VENDOR_ID_BROADCOM		0x14e4
+#define PCI_DEVICE_ID_TIGON3_5752	0x1600
+#define PCI_DEVICE_ID_TIGON3_5752M	0x1601
+#define PCI_DEVICE_ID_NX2_5709		0x1639
+#define PCI_DEVICE_ID_NX2_5709S		0x163a
+#define PCI_DEVICE_ID_TIGON3_5700	0x1644
+#define PCI_DEVICE_ID_TIGON3_5701	0x1645
+#define PCI_DEVICE_ID_TIGON3_5702	0x1646
+#define PCI_DEVICE_ID_TIGON3_5703	0x1647
+#define PCI_DEVICE_ID_TIGON3_5704	0x1648
+#define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
+#define PCI_DEVICE_ID_NX2_5706		0x164a
+#define PCI_DEVICE_ID_NX2_5708		0x164c
+#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
+#define PCI_DEVICE_ID_NX2_57710		0x164e
+#define PCI_DEVICE_ID_NX2_57711		0x164f
+#define PCI_DEVICE_ID_NX2_57711E	0x1650
+#define PCI_DEVICE_ID_TIGON3_5705	0x1653
+#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
+#define PCI_DEVICE_ID_TIGON3_5721	0x1659
+#define PCI_DEVICE_ID_TIGON3_5722	0x165a
+#define PCI_DEVICE_ID_TIGON3_5723	0x165b
+#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
+#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
+#define PCI_DEVICE_ID_NX2_57712		0x1662
+#define PCI_DEVICE_ID_NX2_57712E	0x1663
+#define PCI_DEVICE_ID_TIGON3_5714	0x1668
+#define PCI_DEVICE_ID_TIGON3_5714S	0x1669
+#define PCI_DEVICE_ID_TIGON3_5780	0x166a
+#define PCI_DEVICE_ID_TIGON3_5780S	0x166b
+#define PCI_DEVICE_ID_TIGON3_5705F	0x166e
+#define PCI_DEVICE_ID_TIGON3_5754M	0x1672
+#define PCI_DEVICE_ID_TIGON3_5755M	0x1673
+#define PCI_DEVICE_ID_TIGON3_5756	0x1674
+#define PCI_DEVICE_ID_TIGON3_5751	0x1677
+#define PCI_DEVICE_ID_TIGON3_5715	0x1678
+#define PCI_DEVICE_ID_TIGON3_5715S	0x1679
+#define PCI_DEVICE_ID_TIGON3_5754	0x167a
+#define PCI_DEVICE_ID_TIGON3_5755	0x167b
+#define PCI_DEVICE_ID_TIGON3_5751M	0x167d
+#define PCI_DEVICE_ID_TIGON3_5751F	0x167e
+#define PCI_DEVICE_ID_TIGON3_5787F	0x167f
+#define PCI_DEVICE_ID_TIGON3_5761E	0x1680
+#define PCI_DEVICE_ID_TIGON3_5761	0x1681
+#define PCI_DEVICE_ID_TIGON3_5764	0x1684
+#define PCI_DEVICE_ID_NX2_57800		0x168a
+#define PCI_DEVICE_ID_NX2_57840		0x168d
+#define PCI_DEVICE_ID_NX2_57810		0x168e
+#define PCI_DEVICE_ID_TIGON3_5787M	0x1693
+#define PCI_DEVICE_ID_TIGON3_5782	0x1696
+#define PCI_DEVICE_ID_TIGON3_5784	0x1698
+#define PCI_DEVICE_ID_TIGON3_5786	0x169a
+#define PCI_DEVICE_ID_TIGON3_5787	0x169b
+#define PCI_DEVICE_ID_TIGON3_5788	0x169c
+#define PCI_DEVICE_ID_TIGON3_5789	0x169d
+#define PCI_DEVICE_ID_NX2_57800_MF	0x16a5
+#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
+#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
+#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
+#define PCI_DEVICE_ID_NX2_57800_VF	0x16a9
+#define PCI_DEVICE_ID_NX2_5706S		0x16aa
+#define PCI_DEVICE_ID_NX2_57840_MF	0x16ab
+#define PCI_DEVICE_ID_NX2_5708S		0x16ac
+#define PCI_DEVICE_ID_NX2_57840_VF	0x16ad
+#define PCI_DEVICE_ID_NX2_57810_MF	0x16ae
+#define PCI_DEVICE_ID_NX2_57810_VF	0x16af
+#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
+#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
+#define PCI_DEVICE_ID_TIGON3_5781	0x16dd
+#define PCI_DEVICE_ID_TIGON3_5753	0x16f7
+#define PCI_DEVICE_ID_TIGON3_5753M	0x16fd
+#define PCI_DEVICE_ID_TIGON3_5753F	0x16fe
+#define PCI_DEVICE_ID_TIGON3_5901	0x170d
+#define PCI_DEVICE_ID_BCM4401B1		0x170c
+#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
+#define PCI_DEVICE_ID_TIGON3_5906	0x1712
+#define PCI_DEVICE_ID_TIGON3_5906M	0x1713
+#define PCI_DEVICE_ID_BCM4401		0x4401
+#define PCI_DEVICE_ID_BCM4401B0		0x4402
+
+#define PCI_VENDOR_ID_TOPIC		0x151f
+#define PCI_DEVICE_ID_TOPIC_TP560	0x0000
+
+#define PCI_VENDOR_ID_MAINPINE		0x1522
+#define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
+#define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
+#define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
+#define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
+#define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
+#define PCI_DEVICE_ID_ENE_CB714_SD_2	0x0751
+#define PCI_DEVICE_ID_ENE_1211		0x1211
+#define PCI_DEVICE_ID_ENE_1225		0x1225
+#define PCI_DEVICE_ID_ENE_1410		0x1410
+#define PCI_DEVICE_ID_ENE_710		0x1411
+#define PCI_DEVICE_ID_ENE_712		0x1412
+#define PCI_DEVICE_ID_ENE_1420		0x1420
+#define PCI_DEVICE_ID_ENE_720		0x1421
+#define PCI_DEVICE_ID_ENE_722		0x1422
+
+#define PCI_SUBVENDOR_ID_PERLE          0x155f
+#define PCI_SUBDEVICE_ID_PCI_RAS4       0xf001
+#define PCI_SUBDEVICE_ID_PCI_RAS8       0xf010
+
+#define PCI_VENDOR_ID_SYBA		0x1592
+#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
+#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
+
+#define PCI_VENDOR_ID_MORETON		0x15aa
+#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
+
+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
+
+#define PCI_VENDOR_ID_MELLANOX		0x15b3
+#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
+#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE	0x5a46
+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
+#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
+#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
+
+#define PCI_VENDOR_ID_DFI		0x15bd
+
+#define PCI_VENDOR_ID_QUICKNET		0x15e2
+#define PCI_DEVICE_ID_QUICKNET_XJ	0x0500
+
+/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
+#define PCI_VENDOR_ID_ADDIDATA                 0x15B8
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3      0x700C
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3      0x700D
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3      0x700E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3      0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300       0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420       0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500       0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800       0x7013
+
+#define PCI_VENDOR_ID_PDC		0x15e9
+
+#define PCI_VENDOR_ID_FARSITE           0x1619
+#define PCI_DEVICE_ID_FARSITE_T2P       0x0400
+#define PCI_DEVICE_ID_FARSITE_T4P       0x0440
+#define PCI_DEVICE_ID_FARSITE_T1U       0x0610
+#define PCI_DEVICE_ID_FARSITE_T2U       0x0620
+#define PCI_DEVICE_ID_FARSITE_T4U       0x0640
+#define PCI_DEVICE_ID_FARSITE_TE1       0x1610
+#define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
+
+#define PCI_VENDOR_ID_ARIMA		0x161f
+
+#define PCI_VENDOR_ID_BROCADE		0x1657
+#define PCI_DEVICE_ID_BROCADE_CT	0x0014
+#define PCI_DEVICE_ID_BROCADE_FC_8G1P	0x0017
+#define PCI_DEVICE_ID_BROCADE_CT_FC	0x0021
+
+#define PCI_VENDOR_ID_SIBYTE		0x166d
+#define PCI_DEVICE_ID_BCM1250_PCI	0x0001
+#define PCI_DEVICE_ID_BCM1250_HT	0x0002
+
+#define PCI_VENDOR_ID_ATHEROS		0x168c
+
+#define PCI_VENDOR_ID_NETCELL		0x169c
+#define PCI_DEVICE_ID_REVOLUTION	0x0044
+
+#define PCI_VENDOR_ID_CENATEK		0x16CA
+#define PCI_DEVICE_ID_CENATEK_IDE	0x0001
+
+#define PCI_VENDOR_ID_VITESSE		0x1725
+#define PCI_DEVICE_ID_VITESSE_VSC7174	0x7174
+
+#define PCI_VENDOR_ID_LINKSYS		0x1737
+#define PCI_DEVICE_ID_LINKSYS_EG1064	0x1064
+
+#define PCI_VENDOR_ID_ALTIMA		0x173b
+#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
+#define PCI_DEVICE_ID_ALTIMA_AC1001	0x03e9
+#define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
+#define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
+
+#define PCI_VENDOR_ID_BELKIN		0x1799
+#define PCI_DEVICE_ID_BELKIN_F5D7010V7	0x701f
+
+#define PCI_VENDOR_ID_RDC		0x17f3
+#define PCI_DEVICE_ID_RDC_R6020		0x6020
+#define PCI_DEVICE_ID_RDC_R6030		0x6030
+#define PCI_DEVICE_ID_RDC_R6040		0x6040
+#define PCI_DEVICE_ID_RDC_R6060		0x6060
+#define PCI_DEVICE_ID_RDC_R6061		0x6061
+#define PCI_DEVICE_ID_RDC_D1010		0x1010
+
+#define PCI_VENDOR_ID_LENOVO		0x17aa
+
+#define PCI_VENDOR_ID_ARECA		0x17d3
+#define PCI_DEVICE_ID_ARECA_1110	0x1110
+#define PCI_DEVICE_ID_ARECA_1120	0x1120
+#define PCI_DEVICE_ID_ARECA_1130	0x1130
+#define PCI_DEVICE_ID_ARECA_1160	0x1160
+#define PCI_DEVICE_ID_ARECA_1170	0x1170
+#define PCI_DEVICE_ID_ARECA_1200	0x1200
+#define PCI_DEVICE_ID_ARECA_1201	0x1201
+#define PCI_DEVICE_ID_ARECA_1202	0x1202
+#define PCI_DEVICE_ID_ARECA_1210	0x1210
+#define PCI_DEVICE_ID_ARECA_1220	0x1220
+#define PCI_DEVICE_ID_ARECA_1230	0x1230
+#define PCI_DEVICE_ID_ARECA_1260	0x1260
+#define PCI_DEVICE_ID_ARECA_1270	0x1270
+#define PCI_DEVICE_ID_ARECA_1280	0x1280
+#define PCI_DEVICE_ID_ARECA_1380	0x1380
+#define PCI_DEVICE_ID_ARECA_1381	0x1381
+#define PCI_DEVICE_ID_ARECA_1680	0x1680
+#define PCI_DEVICE_ID_ARECA_1681	0x1681
+
+#define PCI_VENDOR_ID_S2IO		0x17d5
+#define	PCI_DEVICE_ID_S2IO_WIN		0x5731
+#define	PCI_DEVICE_ID_S2IO_UNI		0x5831
+#define PCI_DEVICE_ID_HERC_WIN		0x5732
+#define PCI_DEVICE_ID_HERC_UNI		0x5832
+
+#define PCI_VENDOR_ID_SITECOM		0x182d
+#define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
+
+#define PCI_VENDOR_ID_TOPSPIN		0x1867
+
+#define PCI_VENDOR_ID_SILAN		0x1904
+
+#define PCI_VENDOR_ID_RENESAS		0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
+#define PCI_DEVICE_ID_RENESAS_SH7786	0x0010
+
+#define PCI_VENDOR_ID_SOLARFLARE	0x1924
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0	0x0703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1	0x6703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B	0x0710
+
+#define PCI_VENDOR_ID_TDI               0x192E
+#define PCI_DEVICE_ID_TDI_EHCI          0x0101
+
+#define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_DEVICE_ID_MPC8308		0xc006
+#define PCI_DEVICE_ID_MPC8315E		0x00b4
+#define PCI_DEVICE_ID_MPC8315		0x00b5
+#define PCI_DEVICE_ID_MPC8314E		0x00b6
+#define PCI_DEVICE_ID_MPC8314		0x00b7
+#define PCI_DEVICE_ID_MPC8378E		0x00c4
+#define PCI_DEVICE_ID_MPC8378		0x00c5
+#define PCI_DEVICE_ID_MPC8377E		0x00c6
+#define PCI_DEVICE_ID_MPC8377		0x00c7
+#define PCI_DEVICE_ID_MPC8548E		0x0012
+#define PCI_DEVICE_ID_MPC8548		0x0013
+#define PCI_DEVICE_ID_MPC8543E		0x0014
+#define PCI_DEVICE_ID_MPC8543		0x0015
+#define PCI_DEVICE_ID_MPC8547E		0x0018
+#define PCI_DEVICE_ID_MPC8545E		0x0019
+#define PCI_DEVICE_ID_MPC8545		0x001a
+#define PCI_DEVICE_ID_MPC8569E		0x0061
+#define PCI_DEVICE_ID_MPC8569		0x0060
+#define PCI_DEVICE_ID_MPC8568E		0x0020
+#define PCI_DEVICE_ID_MPC8568		0x0021
+#define PCI_DEVICE_ID_MPC8567E		0x0022
+#define PCI_DEVICE_ID_MPC8567		0x0023
+#define PCI_DEVICE_ID_MPC8533E		0x0030
+#define PCI_DEVICE_ID_MPC8533		0x0031
+#define PCI_DEVICE_ID_MPC8544E		0x0032
+#define PCI_DEVICE_ID_MPC8544		0x0033
+#define PCI_DEVICE_ID_MPC8572E		0x0040
+#define PCI_DEVICE_ID_MPC8572		0x0041
+#define PCI_DEVICE_ID_MPC8536E		0x0050
+#define PCI_DEVICE_ID_MPC8536		0x0051
+#define PCI_DEVICE_ID_P2020E		0x0070
+#define PCI_DEVICE_ID_P2020		0x0071
+#define PCI_DEVICE_ID_P2010E		0x0078
+#define PCI_DEVICE_ID_P2010		0x0079
+#define PCI_DEVICE_ID_P1020E		0x0100
+#define PCI_DEVICE_ID_P1020		0x0101
+#define PCI_DEVICE_ID_P1021E		0x0102
+#define PCI_DEVICE_ID_P1021		0x0103
+#define PCI_DEVICE_ID_P1011E		0x0108
+#define PCI_DEVICE_ID_P1011		0x0109
+#define PCI_DEVICE_ID_P1022E		0x0110
+#define PCI_DEVICE_ID_P1022		0x0111
+#define PCI_DEVICE_ID_P1013E		0x0118
+#define PCI_DEVICE_ID_P1013		0x0119
+#define PCI_DEVICE_ID_P4080E		0x0400
+#define PCI_DEVICE_ID_P4080		0x0401
+#define PCI_DEVICE_ID_P4040E		0x0408
+#define PCI_DEVICE_ID_P4040		0x0409
+#define PCI_DEVICE_ID_P2040E		0x0410
+#define PCI_DEVICE_ID_P2040		0x0411
+#define PCI_DEVICE_ID_P3041E		0x041E
+#define PCI_DEVICE_ID_P3041		0x041F
+#define PCI_DEVICE_ID_P5020E		0x0420
+#define PCI_DEVICE_ID_P5020		0x0421
+#define PCI_DEVICE_ID_P5010E		0x0428
+#define PCI_DEVICE_ID_P5010		0x0429
+#define PCI_DEVICE_ID_MPC8641		0x7010
+#define PCI_DEVICE_ID_MPC8641D		0x7011
+#define PCI_DEVICE_ID_MPC8610		0x7018
+
+#define PCI_VENDOR_ID_PASEMI		0x1959
+
+#define PCI_VENDOR_ID_ATTANSIC		0x1969
+#define PCI_DEVICE_ID_ATTANSIC_L1	0x1048
+#define PCI_DEVICE_ID_ATTANSIC_L2	0x2048
+
+#define PCI_VENDOR_ID_JMICRON		0x197B
+#define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
+#define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
+#define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
+#define PCI_DEVICE_ID_JMICRON_JMB364	0x2364
+#define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
+#define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
+#define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
+#define PCI_DEVICE_ID_JMICRON_JMB369	0x2369
+#define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383
+#define PCI_DEVICE_ID_JMICRON_JMB385_MS	0x2388
+#define PCI_DEVICE_ID_JMICRON_JMB388_SD	0x2391
+#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
+#define PCI_DEVICE_ID_JMICRON_JMB390_MS	0x2393
+
+#define PCI_VENDOR_ID_KORENIX		0x1982
+#define PCI_DEVICE_ID_KORENIX_JETCARDF0	0x1600
+#define PCI_DEVICE_ID_KORENIX_JETCARDF1	0x16ff
+#define PCI_DEVICE_ID_KORENIX_JETCARDF2	0x1700
+#define PCI_DEVICE_ID_KORENIX_JETCARDF3	0x17ff
+
+#define PCI_VENDOR_ID_QMI		0x1a32
+
+#define PCI_VENDOR_ID_AZWAVE		0x1a3b
+
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
+#define PCI_VENDOR_ID_TEKRAM		0x1de1
+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
+
+#define PCI_VENDOR_ID_TEHUTI		0x1fc9
+#define PCI_DEVICE_ID_TEHUTI_3009	0x3009
+#define PCI_DEVICE_ID_TEHUTI_3010	0x3010
+#define PCI_DEVICE_ID_TEHUTI_3014	0x3014
+
+#define PCI_VENDOR_ID_HINT             0x3388
+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
+
+#define PCI_VENDOR_ID_3DLABS		0x3d3d
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
+
+#define PCI_VENDOR_ID_NETXEN		0x4040
+#define PCI_DEVICE_ID_NX2031_10GXSR	0x0001
+#define PCI_DEVICE_ID_NX2031_10GCX4	0x0002
+#define PCI_DEVICE_ID_NX2031_4GCU	0x0003
+#define PCI_DEVICE_ID_NX2031_IMEZ	0x0004
+#define PCI_DEVICE_ID_NX2031_HMEZ	0x0005
+#define PCI_DEVICE_ID_NX2031_XG_MGMT	0x0024
+#define PCI_DEVICE_ID_NX2031_XG_MGMT2	0x0025
+#define PCI_DEVICE_ID_NX3031		0x0100
+
+#define PCI_VENDOR_ID_AKS		0x416c
+#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
+
+#define PCI_VENDOR_ID_ACCESSIO		0x494f
+#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM	0x22c0
+
+#define PCI_VENDOR_ID_S3		0x5333
+#define PCI_DEVICE_ID_S3_TRIO		0x8811
+#define PCI_DEVICE_ID_S3_868		0x8880
+#define PCI_DEVICE_ID_S3_968		0x88f0
+#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
+#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
+
+#define PCI_VENDOR_ID_DUNORD		0x5544
+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
+
+#define PCI_VENDOR_ID_DCI		0x6666
+#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
+#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
+#define PCI_DEVICE_ID_DCI_PCCOM2	0x0004
+
+#define PCI_VENDOR_ID_INTEL		0x8086
+#define PCI_DEVICE_ID_INTEL_EESSC	0x0008
+#define PCI_DEVICE_ID_INTEL_PXHD_0	0x0320
+#define PCI_DEVICE_ID_INTEL_PXHD_1	0x0321
+#define PCI_DEVICE_ID_INTEL_PXH_0	0x0329
+#define PCI_DEVICE_ID_INTEL_PXH_1	0x032A
+#define PCI_DEVICE_ID_INTEL_PXHV	0x032C
+#define PCI_DEVICE_ID_INTEL_80332_0	0x0330
+#define PCI_DEVICE_ID_INTEL_80332_1	0x0332
+#define PCI_DEVICE_ID_INTEL_80333_0	0x0370
+#define PCI_DEVICE_ID_INTEL_80333_1	0x0372
+#define PCI_DEVICE_ID_INTEL_82375	0x0482
+#define PCI_DEVICE_ID_INTEL_82424	0x0483
+#define PCI_DEVICE_ID_INTEL_82378	0x0484
+#define PCI_DEVICE_ID_INTEL_MRST_SD0	0x0807
+#define PCI_DEVICE_ID_INTEL_MRST_SD1	0x0808
+#define PCI_DEVICE_ID_INTEL_MFD_SD	0x0820
+#define PCI_DEVICE_ID_INTEL_MFD_SDIO1	0x0821
+#define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
+#define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
+#define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
+#define PCI_DEVICE_ID_INTEL_I960	0x0960
+#define PCI_DEVICE_ID_INTEL_I960RM	0x0962
+#define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
+#define PCI_DEVICE_ID_INTEL_82573E_SOL	0x1085
+#define PCI_DEVICE_ID_INTEL_82573L_SOL	0x108F
+#define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
+#define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
+#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
+#define PCI_DEVICE_ID_INTEL_82437	0x122d
+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
+#define PCI_DEVICE_ID_INTEL_82441	0x1237
+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
+#define PCI_DEVICE_ID_INTEL_82439	0x1250
+#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
+#define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
+#define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
+#define PCI_DEVICE_ID_INTEL_IOAT	0x1a38
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN	0x1c41
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX	0x1c5f
+#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0	0x1d40
+#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1	0x1d41
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI	0x1e31
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN	0x1e40
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX	0x1e5f
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN	0x2310
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX	0x231f
+#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
+#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
+#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
+#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
+#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
+#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
+#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
+#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
+#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
+#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
+#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
+#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
+#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
+#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
+#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
+#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
+#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
+#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
+#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
+#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
+#define PCI_DEVICE_ID_INTEL_82801E_0	0x2450
+#define PCI_DEVICE_ID_INTEL_82801E_11	0x245b
+#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
+#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
+#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
+#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
+#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
+#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
+#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
+#define PCI_DEVICE_ID_INTEL_82801DB_0	0x24c0
+#define PCI_DEVICE_ID_INTEL_82801DB_1	0x24c1
+#define PCI_DEVICE_ID_INTEL_82801DB_2	0x24c2
+#define PCI_DEVICE_ID_INTEL_82801DB_3	0x24c3
+#define PCI_DEVICE_ID_INTEL_82801DB_5	0x24c5
+#define PCI_DEVICE_ID_INTEL_82801DB_6	0x24c6
+#define PCI_DEVICE_ID_INTEL_82801DB_9	0x24c9
+#define PCI_DEVICE_ID_INTEL_82801DB_10	0x24ca
+#define PCI_DEVICE_ID_INTEL_82801DB_11	0x24cb
+#define PCI_DEVICE_ID_INTEL_82801DB_12  0x24cc
+#define PCI_DEVICE_ID_INTEL_82801EB_0	0x24d0
+#define PCI_DEVICE_ID_INTEL_82801EB_1	0x24d1
+#define PCI_DEVICE_ID_INTEL_82801EB_3	0x24d3
+#define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
+#define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
+#define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_12	0x24dc
+#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
+#define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
+#define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
+#define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
+#define PCI_DEVICE_ID_INTEL_ESB_5	0x25a6
+#define PCI_DEVICE_ID_INTEL_ESB_9	0x25ab
+#define PCI_DEVICE_ID_INTEL_ESB_10	0x25ac
+#define PCI_DEVICE_ID_INTEL_82820_HB	0x2500
+#define PCI_DEVICE_ID_INTEL_82820_UP_HB	0x2501
+#define PCI_DEVICE_ID_INTEL_82850_HB	0x2530
+#define PCI_DEVICE_ID_INTEL_82860_HB	0x2531
+#define PCI_DEVICE_ID_INTEL_E7501_MCH	0x254c
+#define PCI_DEVICE_ID_INTEL_82845G_HB	0x2560
+#define PCI_DEVICE_ID_INTEL_82845G_IG	0x2562
+#define PCI_DEVICE_ID_INTEL_82865_HB	0x2570
+#define PCI_DEVICE_ID_INTEL_82865_IG	0x2572
+#define PCI_DEVICE_ID_INTEL_82875_HB	0x2578
+#define PCI_DEVICE_ID_INTEL_82915G_HB	0x2580
+#define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
+#define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
+#define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
+#define PCI_DEVICE_ID_INTEL_5000_ERR	0x25F0
+#define PCI_DEVICE_ID_INTEL_5000_FBD0	0x25F5
+#define PCI_DEVICE_ID_INTEL_5000_FBD1	0x25F6
+#define PCI_DEVICE_ID_INTEL_82945G_HB	0x2770
+#define PCI_DEVICE_ID_INTEL_82945G_IG	0x2772
+#define PCI_DEVICE_ID_INTEL_3000_HB	0x2778
+#define PCI_DEVICE_ID_INTEL_82945GM_HB	0x27A0
+#define PCI_DEVICE_ID_INTEL_82945GM_IG	0x27A2
+#define PCI_DEVICE_ID_INTEL_ICH6_0	0x2640
+#define PCI_DEVICE_ID_INTEL_ICH6_1	0x2641
+#define PCI_DEVICE_ID_INTEL_ICH6_2	0x2642
+#define PCI_DEVICE_ID_INTEL_ICH6_16	0x266a
+#define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
+#define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
+#define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
+#define PCI_DEVICE_ID_INTEL_ESB2_0	0x2670
+#define PCI_DEVICE_ID_INTEL_ESB2_14	0x2698
+#define PCI_DEVICE_ID_INTEL_ESB2_17	0x269b
+#define PCI_DEVICE_ID_INTEL_ESB2_18	0x269e
+#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
+#define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
+#define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
+#define PCI_DEVICE_ID_INTEL_TGP_LPC	0x27bc
+#define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
+#define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
+#define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
+#define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
+#define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
+#define PCI_DEVICE_ID_INTEL_ICH8_0	0x2810
+#define PCI_DEVICE_ID_INTEL_ICH8_1	0x2811
+#define PCI_DEVICE_ID_INTEL_ICH8_2	0x2812
+#define PCI_DEVICE_ID_INTEL_ICH8_3	0x2814
+#define PCI_DEVICE_ID_INTEL_ICH8_4	0x2815
+#define PCI_DEVICE_ID_INTEL_ICH8_5	0x283e
+#define PCI_DEVICE_ID_INTEL_ICH8_6	0x2850
+#define PCI_DEVICE_ID_INTEL_ICH9_0	0x2910
+#define PCI_DEVICE_ID_INTEL_ICH9_1	0x2917
+#define PCI_DEVICE_ID_INTEL_ICH9_2	0x2912
+#define PCI_DEVICE_ID_INTEL_ICH9_3	0x2913
+#define PCI_DEVICE_ID_INTEL_ICH9_4	0x2914
+#define PCI_DEVICE_ID_INTEL_ICH9_5	0x2919
+#define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
+#define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
+#define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
+#define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
+#define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
+#define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB	0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG	0x358e
+#define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
+#define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
+#define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
+#define PCI_DEVICE_ID_INTEL_E7320_MCH	0x3592
+#define PCI_DEVICE_ID_INTEL_MCH_PA	0x3595
+#define PCI_DEVICE_ID_INTEL_MCH_PA1	0x3596
+#define PCI_DEVICE_ID_INTEL_MCH_PB	0x3597
+#define PCI_DEVICE_ID_INTEL_MCH_PB1	0x3598
+#define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
+#define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
+#define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
+#define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
+#define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF0	0x3710
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF1	0x3711
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF2	0x3712
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF3	0x3713
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF4	0x3714
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF5	0x3715
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF6	0x3716
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF7	0x3717
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF8	0x3718
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF9	0x3719
+#define PCI_DEVICE_ID_INTEL_ICH10_0	0x3a14
+#define PCI_DEVICE_ID_INTEL_ICH10_1	0x3a16
+#define PCI_DEVICE_ID_INTEL_ICH10_2	0x3a18
+#define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
+#define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
+#define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN	0x3b00
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX	0x3b1f
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB0	0x3c20
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB1	0x3c21
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB2	0x3c22
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB3	0x3c23
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB4	0x3c24
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB5	0x3c25
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB6	0x3c26
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB7	0x3c27
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB8	0x3c2e
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB9	0x3c2f
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
+#define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
+#define PCI_DEVICE_ID_INTEL_IOAT_SCNB	0x65ff
+#define PCI_DEVICE_ID_INTEL_EP80579_0	0x5031
+#define PCI_DEVICE_ID_INTEL_EP80579_1	0x5032
+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
+#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
+#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
+#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
+#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
+#define PCI_DEVICE_ID_INTEL_82810E_MC	0x7124
+#define PCI_DEVICE_ID_INTEL_82810E_IG	0x7125
+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
+#define PCI_DEVICE_ID_INTEL_440MX	0x7195
+#define PCI_DEVICE_ID_INTEL_440MX_6	0x7196
+#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
+#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
+#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
+#define PCI_DEVICE_ID_INTEL_82443GX_0	0x71a0
+#define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
+#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
+#define PCI_DEVICE_ID_INTEL_SCH_LPC	0x8119
+#define PCI_DEVICE_ID_INTEL_SCH_IDE	0x811a
+#define PCI_DEVICE_ID_INTEL_ITC_LPC	0x8186
+#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
+#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
+#define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
+#define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
+#define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
+#define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
+#define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
+
+#define PCI_VENDOR_ID_SCALEMP		0x8686
+#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL	0x1010
+
+#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
+#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
+#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
+#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
+
+#define PCI_VENDOR_ID_KTI		0x8e2e
+
+#define PCI_VENDOR_ID_ADAPTEC		0x9004
+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
+#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
+#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
+#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
+#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
+#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
+#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
+#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
+
+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
+#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
+#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
+#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
+#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
+#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
+#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
+#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
+#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
+#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
+#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
+#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN   0x0500
+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP	0x0503
+
+#define PCI_VENDOR_ID_HOLTEK		0x9412
+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
+
+#define PCI_VENDOR_ID_NETMOS		0x9710
+#define PCI_DEVICE_ID_NETMOS_9705	0x9705
+#define PCI_DEVICE_ID_NETMOS_9715	0x9715
+#define PCI_DEVICE_ID_NETMOS_9735	0x9735
+#define PCI_DEVICE_ID_NETMOS_9745	0x9745
+#define PCI_DEVICE_ID_NETMOS_9755	0x9755
+#define PCI_DEVICE_ID_NETMOS_9805	0x9805
+#define PCI_DEVICE_ID_NETMOS_9815	0x9815
+#define PCI_DEVICE_ID_NETMOS_9835	0x9835
+#define PCI_DEVICE_ID_NETMOS_9845	0x9845
+#define PCI_DEVICE_ID_NETMOS_9855	0x9855
+#define PCI_DEVICE_ID_NETMOS_9865	0x9865
+#define PCI_DEVICE_ID_NETMOS_9900	0x9900
+#define PCI_DEVICE_ID_NETMOS_9901	0x9901
+#define PCI_DEVICE_ID_NETMOS_9904	0x9904
+#define PCI_DEVICE_ID_NETMOS_9912	0x9912
+#define PCI_DEVICE_ID_NETMOS_9922	0x9922
+
+#define PCI_VENDOR_ID_3COM_2		0xa727
+
+#define PCI_VENDOR_ID_DIGIUM		0xd161
+#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
+
+#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
+#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
+#define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
+
+#define PCI_VENDOR_ID_TIGERJET		0xe159
+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
+
+#define PCI_VENDOR_ID_XILINX_RME	0xea60
+#define PCI_DEVICE_ID_RME_DIGI32	0x9896
+#define PCI_DEVICE_ID_RME_DIGI32_PRO	0x9897
+#define PCI_DEVICE_ID_RME_DIGI32_8	0x9898
+
+#define PCI_VENDOR_ID_XEN		0x5853
+#define PCI_DEVICE_ID_XEN_PLATFORM	0x0001
+
+#define PCI_VENDOR_ID_OCZ		0x1b85
diff --git a/include/compat/linux/pm_qos.h b/include/compat/linux/pm_qos.h
new file mode 100755
index 0000000..c58c1c1
--- /dev/null
+++ b/include/compat/linux/pm_qos.h
@@ -0,0 +1,12 @@
+#ifndef _COMPAT_LINUX_PM_QOS_H
+#define _COMPAT_LINUX_PM_QOS_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0))
+#include_next <linux/pm_qos.h>
+#else
+#include <linux/pm_qos_params.h>
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) */
+
+#endif	/* _COMPAT_LINUX_PM_QOS_H */
diff --git a/include/compat/linux/pm_qos_params.h b/include/compat/linux/pm_qos_params.h
new file mode 100755
index 0000000..d0e3ad8
--- /dev/null
+++ b/include/compat/linux/pm_qos_params.h
@@ -0,0 +1,36 @@
+#include <linux/version.h>
+
+#ifndef __COMPAT_LINUX_PM_QOS_PARAMS_H
+#define __COMPAT_LINUX_PM_QOS_PARAMS_H
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25))
+#include_next <linux/pm_qos_params.h>
+#else
+/* interface for the pm_qos_power infrastructure of the linux kernel.
+ *
+ * Mark Gross <mgross@linux.intel.com>
+ */
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/miscdevice.h>
+
+#define PM_QOS_RESERVED 0
+#define PM_QOS_CPU_DMA_LATENCY 1
+#define PM_QOS_NETWORK_LATENCY 2
+#define PM_QOS_NETWORK_THROUGHPUT 3
+#define PM_QOS_SYSTEM_BUS_FREQ 4
+
+#define PM_QOS_NUM_CLASSES 5
+#define PM_QOS_DEFAULT_VALUE -1
+
+int pm_qos_add_requirement(int qos, char *name, s32 value);
+int pm_qos_update_requirement(int qos, char *name, s32 new_value);
+void pm_qos_remove_requirement(int qos, char *name);
+
+int pm_qos_requirement(int qos);
+
+int pm_qos_add_notifier(int qos, struct notifier_block *notifier);
+int pm_qos_remove_notifier(int qos, struct notifier_block *notifier);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)) */
+
+#endif
diff --git a/include/compat/linux/pm_runtime.h b/include/compat/linux/pm_runtime.h
new file mode 100755
index 0000000..eec965b
--- /dev/null
+++ b/include/compat/linux/pm_runtime.h
@@ -0,0 +1,14 @@
+#include <linux/version.h>
+
+#ifndef __COMPAT_LINUX_PM_RUNTIME_H
+#define __COMPAT_LINUX_PM_RUNTIME_H
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32))
+#include_next <linux/pm_runtime.h>
+#else
+
+static inline void pm_runtime_enable(struct device *dev) {}
+
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)) */
+
+#endif
diff --git a/include/compat/linux/printk.h b/include/compat/linux/printk.h
new file mode 100755
index 0000000..c0822ac
--- /dev/null
+++ b/include/compat/linux/printk.h
@@ -0,0 +1,12 @@
+#ifndef _COMPAT_LINUX_PRINTK_H
+#define _COMPAT_LINUX_PRINTK_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36))
+#include_next <linux/printk.h>
+#else
+#include <linux/kernel.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)) */
+
+#endif	/* _COMPAT_LINUX_PRINTK_H */
diff --git a/include/compat/linux/rfkill.h b/include/compat/linux/rfkill.h
new file mode 100755
index 0000000..d615ac9
--- /dev/null
+++ b/include/compat/linux/rfkill.h
@@ -0,0 +1,32 @@
+#ifndef __COMPAT_RFKILL_H
+#define __COMPAT_RFKILL_H
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31))
+
+#include_next <linux/rfkill.h>
+
+#else
+
+#include <linux/compat-2.6.h>
+
+#undef CONFIG_RFKILL
+#undef CONFIG_RFKILL_INPUT
+#undef CONFIG_RFKILL_LEDS
+
+#ifdef CONFIG_RFKILL_BACKPORT
+#define CONFIG_RFKILL 1
+#endif
+
+#ifdef CONFIG_RFKILL_BACKPORT_INPUT
+#define CONFIG_RFKILL_INPUT
+#endif
+
+#ifdef CONFIG_RFKILL_BACKPORT_LEDS
+#define CONFIG_RFKILL_LEDS
+#endif
+
+#include <linux/rfkill_backport.h>
+
+#endif
+
+#endif
diff --git a/include/compat/linux/rfkill_backport.h b/include/compat/linux/rfkill_backport.h
new file mode 100755
index 0000000..c6c6084
--- /dev/null
+++ b/include/compat/linux/rfkill_backport.h
@@ -0,0 +1,359 @@
+#ifndef __RFKILL_H
+#define __RFKILL_H
+
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+#ifdef __KERNEL__
+/* don't allow anyone to use these in the kernel */
+enum rfkill_user_states {
+	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
+	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
+	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
+};
+#undef RFKILL_STATE_SOFT_BLOCKED
+#undef RFKILL_STATE_UNBLOCKED
+#undef RFKILL_STATE_HARD_BLOCKED
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+/* this is opaque */
+struct rfkill;
+
+/**
+ * struct rfkill_ops - rfkill driver methods
+ *
+ * @poll: poll the rfkill block state(s) -- only assign this method
+ *	when you need polling. When called, simply call one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
+ *	is getting unblocked you need to take into account the return
+ *	value of those functions to make sure the software block is
+ *	properly used.
+ * @query: query the rfkill block state(s) and call exactly one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
+ *	method if input events can cause hardware state changes to make
+ *	the rfkill core query your driver before setting a requested
+ *	block.
+ * @set_block: turn the transmitter on (blocked == false) or off
+ *	(blocked == true) -- ignore and return 0 when hard blocked.
+ *	This callback must be assigned.
+ */
+struct rfkill_ops {
+	void	(*poll)(struct rfkill *rfkill, void *data);
+	void	(*query)(struct rfkill *rfkill, void *data);
+	int	(*set_block)(void *data, bool blocked);
+};
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+/**
+ * rfkill_alloc - allocate rfkill structure
+ * @name: name of the struct -- the string is not copied internally
+ * @parent: device that has rf switch on it
+ * @type: type of the switch (RFKILL_TYPE_*)
+ * @ops: rfkill methods
+ * @ops_data: data passed to each method
+ *
+ * This function should be called by the transmitter driver to allocate an
+ * rfkill structure. Returns %NULL on failure.
+ */
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data);
+
+/**
+ * rfkill_register - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ *
+ * This function should be called by the transmitter driver to register
+ * the rfkill structure. Before calling this function the driver needs
+ * to be ready to service method calls from rfkill.
+ *
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
+ *
+ * If the hardware blocked state is not set before registration,
+ * it is assumed to be unblocked.
+ */
+int __must_check rfkill_register(struct rfkill *rfkill);
+
+/**
+ * rfkill_pause_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_pause_polling(struct rfkill *rfkill);
+
+/**
+ * rfkill_resume_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_resume_polling(struct rfkill *rfkill);
+
+
+/**
+ * rfkill_unregister - Unregister a rfkill structure.
+ * @rfkill: rfkill structure to be unregistered
+ *
+ * This function should be called by the network driver during device
+ * teardown to destroy rfkill structure. Until it returns, the driver
+ * needs to be able to service method calls.
+ */
+void rfkill_unregister(struct rfkill *rfkill);
+
+/**
+ * rfkill_destroy - free rfkill structure
+ * @rfkill: rfkill structure to be destroyed
+ *
+ * Destroys the rfkill structure.
+ */
+void rfkill_destroy(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_hw_state - Set the internal rfkill hardware block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current hardware block state to set
+ *
+ * rfkill drivers that get events when the hard-blocked state changes
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  They should also use this after
+ * resume if the state could have changed.
+ *
+ * You need not (but may) call this function if poll_state is assigned.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked) so that drivers need not keep track of the soft
+ * block state -- which they might not be able to.
+ */
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_sw_state - Set the internal rfkill software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that get events when the soft-blocked state changes
+ * (yes, some platforms directly act on input but allow changing again)
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user.  This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked).
+ */
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state.  It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace.  Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_states - Set the internal rfkill block states
+ * @rfkill: pointer to the rfkill class to modify.
+ * @sw: the current software block state to set
+ * @hw: the current hardware block state to set
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ */
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
+
+/**
+ * rfkill_blocked - query rfkill block
+ *
+ * @rfkill: rfkill struct to query
+ */
+bool rfkill_blocked(struct rfkill *rfkill);
+#else /* !RFKILL */
+static inline struct rfkill * __must_check
+rfkill_alloc(const char *name,
+	     struct device *parent,
+	     const enum rfkill_type type,
+	     const struct rfkill_ops *ops,
+	     void *ops_data)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	if (rfkill == ERR_PTR(-ENODEV))
+		return 0;
+	return -EINVAL;
+}
+
+static inline void rfkill_pause_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_resume_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_unregister(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_destroy(struct rfkill *rfkill)
+{
+}
+
+static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
+static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+}
+
+static inline bool rfkill_blocked(struct rfkill *rfkill)
+{
+	return false;
+}
+#endif /* RFKILL || RFKILL_MODULE */
+
+#endif /* __KERNEL__ */
+
+#endif /* RFKILL_H */
diff --git a/include/compat/linux/semaphore.h b/include/compat/linux/semaphore.h
new file mode 100755
index 0000000..78af4db
--- /dev/null
+++ b/include/compat/linux/semaphore.h
@@ -0,0 +1,12 @@
+#ifndef _COMPAT_LINUX_SEMAPHORE_H
+#define _COMPAT_LINUX_SEMAPHORE_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25))
+#include_next <linux/semaphore.h>
+#else
+#include <asm/semaphore.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */
+
+#endif	/* _COMPAT_LINUX_SEMAPHORE_H */
diff --git a/include/compat/linux/spi/libertas_spi.h b/include/compat/linux/spi/libertas_spi.h
new file mode 100755
index 0000000..1b5d538
--- /dev/null
+++ b/include/compat/linux/spi/libertas_spi.h
@@ -0,0 +1,29 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
+struct libertas_spi_platform_data {
+	/* There are two ways to read data from the WLAN module's SPI
+	 * interface. Setting 0 or 1 here controls which one is used.
+	 *
+	 * Usually you want to set use_dummy_writes = 1.
+	 * However, if that doesn't work or if you are using a slow SPI clock
+	 * speed, you may want to use 0 here. */
+	u16 use_dummy_writes;
+
+	/* Board specific setup/teardown */
+	int (*setup)(struct spi_device *spi);
+	int (*teardown)(struct spi_device *spi);
+};
+#endif
diff --git a/include/compat/linux/ssb/ssb.h b/include/compat/linux/ssb/ssb.h
new file mode 100755
index 0000000..061e560
--- /dev/null
+++ b/include/compat/linux/ssb/ssb.h
@@ -0,0 +1,538 @@
+#ifndef LINUX_SSB_H_
+#define LINUX_SSB_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/ssb/ssb_regs.h>
+
+
+struct pcmcia_device;
+struct ssb_bus;
+struct ssb_driver;
+
+struct ssb_sprom {
+	u8 revision;
+	u8 il0mac[6];		/* MAC address for 802.11b/g */
+	u8 et0mac[6];		/* MAC address for Ethernet */
+	u8 et1mac[6];		/* MAC address for 802.11a */
+	u8 et0phyaddr;		/* MII address for enet0 */
+	u8 et1phyaddr;		/* MII address for enet1 */
+	u8 et0mdcport;		/* MDIO for enet0 */
+	u8 et1mdcport;		/* MDIO for enet1 */
+	u16 board_rev;		/* Board revision number from SPROM. */
+	u8 country_code;	/* Country Code */
+	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
+	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
+	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
+	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
+	u16 pa0b0;
+	u16 pa0b1;
+	u16 pa0b2;
+	u16 pa1b0;
+	u16 pa1b1;
+	u16 pa1b2;
+	u16 pa1lob0;
+	u16 pa1lob1;
+	u16 pa1lob2;
+	u16 pa1hib0;
+	u16 pa1hib1;
+	u16 pa1hib2;
+	u8 gpio0;		/* GPIO pin 0 */
+	u8 gpio1;		/* GPIO pin 1 */
+	u8 gpio2;		/* GPIO pin 2 */
+	u8 gpio3;		/* GPIO pin 3 */
+	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+	u8 tri2g;		/* 2.4GHz TX isolation */
+	u8 tri5gl;		/* 5.2GHz TX isolation */
+	u8 tri5g;		/* 5.3GHz TX isolation */
+	u8 tri5gh;		/* 5.8GHz TX isolation */
+	u8 txpid2g[4];		/* 2GHz TX power index */
+	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
+	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
+	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
+	u8 rxpo2g;		/* 2GHz RX power offset */
+	u8 rxpo5g;		/* 5GHz RX power offset */
+	u8 rssisav2g;		/* 2GHz RSSI params */
+	u8 rssismc2g;
+	u8 rssismf2g;
+	u8 bxa2g;		/* 2GHz BX arch */
+	u8 rssisav5g;		/* 5GHz RSSI params */
+	u8 rssismc5g;
+	u8 rssismf5g;
+	u8 bxa5g;		/* 5GHz BX arch */
+	u16 cck2gpo;		/* CCK power offset */
+	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
+	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
+	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
+	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
+	u16 boardflags_lo;	/* Board flags (bits 0-15) */
+	u16 boardflags_hi;	/* Board flags (bits 16-31) */
+	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
+	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
+	/* TODO store board flags in a single u64 */
+
+	/* Antenna gain values for up to 4 antennas
+	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+	 * loss in the connectors is bigger than the gain. */
+	struct {
+		struct {
+			s8 a0, a1, a2, a3;
+		} ghz24;	/* 2.4GHz band */
+		struct {
+			s8 a0, a1, a2, a3;
+		} ghz5;		/* 5GHz band */
+	} antenna_gain;
+
+	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+};
+
+/* Information about the PCB the circuitry is soldered on. */
+struct ssb_boardinfo {
+	u16 vendor;
+	u16 type;
+	u8  rev;
+};
+
+
+struct ssb_device;
+/* Lowlevel read/write operations on the device MMIO.
+ * Internal, don't use that outside of ssb. */
+struct ssb_bus_ops {
+	u8 (*read8)(struct ssb_device *dev, u16 offset);
+	u16 (*read16)(struct ssb_device *dev, u16 offset);
+	u32 (*read32)(struct ssb_device *dev, u16 offset);
+	void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
+	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
+	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+#ifdef CONFIG_SSB_BLOCKIO
+	void (*block_read)(struct ssb_device *dev, void *buffer,
+			   size_t count, u16 offset, u8 reg_width);
+	void (*block_write)(struct ssb_device *dev, const void *buffer,
+			    size_t count, u16 offset, u8 reg_width);
+#endif
+};
+
+
+/* Core-ID values. */
+#define SSB_DEV_CHIPCOMMON	0x800
+#define SSB_DEV_ILINE20		0x801
+#define SSB_DEV_SDRAM		0x803
+#define SSB_DEV_PCI		0x804
+#define SSB_DEV_MIPS		0x805
+#define SSB_DEV_ETHERNET	0x806
+#define SSB_DEV_V90		0x807
+#define SSB_DEV_USB11_HOSTDEV	0x808
+#define SSB_DEV_ADSL		0x809
+#define SSB_DEV_ILINE100	0x80A
+#define SSB_DEV_IPSEC		0x80B
+#define SSB_DEV_PCMCIA		0x80D
+#define SSB_DEV_INTERNAL_MEM	0x80E
+#define SSB_DEV_MEMC_SDRAM	0x80F
+#define SSB_DEV_EXTIF		0x811
+#define SSB_DEV_80211		0x812
+#define SSB_DEV_MIPS_3302	0x816
+#define SSB_DEV_USB11_HOST	0x817
+#define SSB_DEV_USB11_DEV	0x818
+#define SSB_DEV_USB20_HOST	0x819
+#define SSB_DEV_USB20_DEV	0x81A
+#define SSB_DEV_SDIO_HOST	0x81B
+#define SSB_DEV_ROBOSWITCH	0x81C
+#define SSB_DEV_PARA_ATA	0x81D
+#define SSB_DEV_SATA_XORDMA	0x81E
+#define SSB_DEV_ETHERNET_GBIT	0x81F
+#define SSB_DEV_PCIE		0x820
+#define SSB_DEV_MIMO_PHY	0x821
+#define SSB_DEV_SRAM_CTRLR	0x822
+#define SSB_DEV_MINI_MACPHY	0x823
+#define SSB_DEV_ARM_1176	0x824
+#define SSB_DEV_ARM_7TDMI	0x825
+
+/* Vendor-ID values */
+#define SSB_VENDOR_BROADCOM	0x4243
+
+/* Some kernel subsystems poke with dev->drvdata, so we must use the
+ * following ugly workaround to get from struct device to struct ssb_device */
+struct __ssb_dev_wrapper {
+	struct device dev;
+	struct ssb_device *sdev;
+};
+
+struct ssb_device {
+	/* Having a copy of the ops pointer in each dev struct
+	 * is an optimization. */
+	const struct ssb_bus_ops *ops;
+
+	struct device *dev, *dma_dev;
+
+	struct ssb_bus *bus;
+	struct ssb_device_id id;
+
+	u8 core_index;
+	unsigned int irq;
+
+	/* Internal-only stuff follows. */
+	void *drvdata;		/* Per-device data */
+	void *devtypedata;	/* Per-devicetype (eg 802.11) data */
+};
+
+/* Go from struct device to struct ssb_device. */
+static inline
+struct ssb_device * dev_to_ssb_dev(struct device *dev)
+{
+	struct __ssb_dev_wrapper *wrap;
+	wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+	return wrap->sdev;
+}
+
+/* Device specific user data */
+static inline
+void ssb_set_drvdata(struct ssb_device *dev, void *data)
+{
+	dev->drvdata = data;
+}
+static inline
+void * ssb_get_drvdata(struct ssb_device *dev)
+{
+	return dev->drvdata;
+}
+
+/* Devicetype specific user data. This is per device-type (not per device) */
+void ssb_set_devtypedata(struct ssb_device *dev, void *data);
+static inline
+void * ssb_get_devtypedata(struct ssb_device *dev)
+{
+	return dev->devtypedata;
+}
+
+
+struct ssb_driver {
+	const char *name;
+	const struct ssb_device_id *id_table;
+
+	int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
+	void (*remove)(struct ssb_device *dev);
+	int (*suspend)(struct ssb_device *dev, pm_message_t state);
+	int (*resume)(struct ssb_device *dev);
+	void (*shutdown)(struct ssb_device *dev);
+
+	struct device_driver drv;
+};
+#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+#define ssb_driver_register(drv) \
+	__ssb_driver_register(drv, THIS_MODULE)
+
+extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+
+
+enum ssb_bustype {
+	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
+	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
+	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
+	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
+};
+
+/* board_vendor */
+#define SSB_BOARDVENDOR_BCM	0x14E4	/* Broadcom */
+#define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
+#define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
+/* board_type */
+#define SSB_BOARD_BCM94306MP	0x0418
+#define SSB_BOARD_BCM4309G	0x0421
+#define SSB_BOARD_BCM4306CB	0x0417
+#define SSB_BOARD_BCM4309MP	0x040C
+#define SSB_BOARD_MP4318	0x044A
+#define SSB_BOARD_BU4306	0x0416
+#define SSB_BOARD_BU4309	0x040A
+/* chip_package */
+#define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
+#define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+#define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
+
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_mips.h>
+#include <linux/ssb/ssb_driver_extif.h>
+#include <linux/ssb/ssb_driver_pci.h>
+
+struct ssb_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct ssb_bus_ops *ops;
+
+	/* The core currently mapped into the MMIO window.
+	 * Not valid on all host-buses. So don't use outside of SSB. */
+	struct ssb_device *mapped_device;
+	union {
+		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+		u8 mapped_pcmcia_seg;
+		/* Current SSB base address window for SDIO. */
+		u32 sdio_sbaddr;
+	};
+	/* Lock for core and segment switching.
+	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+	spinlock_t bar_lock;
+
+	/* The host-bus this backplane is running on. */
+	enum ssb_bustype bustype;
+	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
+	union {
+		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+		struct pci_dev *host_pci;
+		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+		struct pcmcia_device *host_pcmcia;
+		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+		struct sdio_func *host_sdio;
+	};
+
+	/* See enum ssb_quirks */
+	unsigned int quirks;
+
+#ifdef CONFIG_SSB_SPROM
+	/* Mutex to protect the SPROM writing. */
+	struct mutex sprom_mutex;
+#endif
+
+	/* ID information about the Chip. */
+	u16 chip_id;
+	u8 chip_rev;
+	u16 sprom_offset;
+	u16 sprom_size;		/* number of words in sprom */
+	u8 chip_package;
+
+	/* List of devices (cores) on the backplane. */
+	struct ssb_device devices[SSB_MAX_NR_CORES];
+	u8 nr_devices;
+
+	/* Software ID number for this bus. */
+	unsigned int busnumber;
+
+	/* The ChipCommon device (if available). */
+	struct ssb_chipcommon chipco;
+	/* The PCI-core device (if available). */
+	struct ssb_pcicore pcicore;
+	/* The MIPS-core device (if available). */
+	struct ssb_mipscore mipscore;
+	/* The EXTif-core device (if available). */
+	struct ssb_extif extif;
+
+	/* The following structure elements are not available in early
+	 * SSB initialization. Though, they are available for regular
+	 * registered drivers at any stage. So be careful when
+	 * using them in the ssb core code. */
+
+	/* ID information about the PCB. */
+	struct ssb_boardinfo boardinfo;
+	/* Contents of the SPROM. */
+	struct ssb_sprom sprom;
+	/* If the board has a cardbus slot, this is set to true. */
+	bool has_cardbus_slot;
+
+#ifdef CONFIG_SSB_EMBEDDED
+	/* Lock for GPIO register access. */
+	spinlock_t gpio_lock;
+#endif /* EMBEDDED */
+
+	/* Internal-only stuff follows. Do not touch. */
+	struct list_head list;
+#ifdef CONFIG_SSB_DEBUG
+	/* Is the bus already powered up? */
+	bool powered_up;
+	int power_warn_count;
+#endif /* DEBUG */
+};
+
+enum ssb_quirks {
+	/* SDIO connected card requires performing a read after writing a 32-bit value */
+	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
+};
+
+/* The initialization-invariants. */
+struct ssb_init_invariants {
+	/* Versioning information about the PCB. */
+	struct ssb_boardinfo boardinfo;
+	/* The SPROM information. That's either stored in an
+	 * EEPROM or NVRAM on the board. */
+	struct ssb_sprom sprom;
+	/* If the board has a cardbus slot, this is set to true. */
+	bool has_cardbus_slot;
+};
+/* Type of function to fetch the invariants. */
+typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
+				     struct ssb_init_invariants *iv);
+
+/* Register a SSB system bus. get_invariants() is called after the
+ * basic system devices are initialized.
+ * The invariants are usually fetched from some NVRAM.
+ * Put the invariants into the struct pointed to by iv. */
+extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+				   unsigned long baseaddr,
+				   ssb_invariants_func_t get_invariants);
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
+				   struct pci_dev *host_pci);
+#endif /* CONFIG_SSB_PCIHOST */
+#ifdef CONFIG_SSB_PCMCIAHOST
+extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+				      struct pcmcia_device *pcmcia_dev,
+				      unsigned long baseaddr);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+				    struct sdio_func *sdio_func,
+				    unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
+
+extern void ssb_bus_unregister(struct ssb_bus *bus);
+
+/* Does the device have an SPROM? */
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
+
+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int ssb_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct ssb_bus *bus,
+		struct ssb_sprom *out));
+
+/* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+extern int ssb_bus_suspend(struct ssb_bus *bus);
+/* Resume a SSB bus.
+ * Call this from the parent bus resume routine. */
+extern int ssb_bus_resume(struct ssb_bus *bus);
+
+extern u32 ssb_clockspeed(struct ssb_bus *bus);
+
+/* Is the device enabled in hardware? */
+int ssb_device_is_enabled(struct ssb_device *dev);
+/* Enable a device and pass device-specific SSB_TMSLOW flags.
+ * If no device-specific flags are available, use 0. */
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
+/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
+
+
+/* Device MMIO register read/write functions. */
+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read8(dev, offset);
+}
+static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read16(dev, offset);
+}
+static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read32(dev, offset);
+}
+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
+{
+	dev->ops->write8(dev, offset, value);
+}
+static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+	dev->ops->write16(dev, offset, value);
+}
+static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+	dev->ops->write32(dev, offset, value);
+}
+#ifdef CONFIG_SSB_BLOCKIO
+static inline void ssb_block_read(struct ssb_device *dev, void *buffer,
+				  size_t count, u16 offset, u8 reg_width)
+{
+	dev->ops->block_read(dev, buffer, count, offset, reg_width);
+}
+
+static inline void ssb_block_write(struct ssb_device *dev, const void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	dev->ops->block_write(dev, buffer, count, offset, reg_width);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+
+/* The SSB DMA API. Use this API for any DMA operation on the device.
+ * This API basically is a wrapper that calls the correct DMA API for
+ * the host device type the SSB device is attached to. */
+
+/* Translation (routing) bits that need to be ORed to DMA
+ * addresses before they are given to a device. */
+extern u32 ssb_dma_translation(struct ssb_device *dev);
+#define SSB_DMA_TRANSLATION_MASK	0xC0000000
+#define SSB_DMA_TRANSLATION_SHIFT	30
+
+static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DEBUG
+	printk(KERN_ERR "SSB: BUG! Calling DMA API for "
+	       "unsupported bustype %d\n", dev->bus->bustype);
+#endif /* DEBUG */
+}
+
+#ifdef CONFIG_SSB_PCIHOST
+/* PCI-host wrapper driver */
+extern int ssb_pcihost_register(struct pci_driver *driver);
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+	pci_unregister_driver(driver);
+}
+
+static inline
+void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
+{
+	if (sdev->bus->bustype == SSB_BUSTYPE_PCI)
+		pci_set_power_state(sdev->bus->host_pci, state);
+}
+#else
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+}
+
+static inline
+void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
+{
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+
+/* If a driver is shutdown or suspended, call this to signal
+ * that the bus may be completely powered down. SSB will decide,
+ * if it's really time to power down the bus, based on if there
+ * are other devices that want to run. */
+extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
+/* Before initializing and enabling a device, call this to power-up the bus.
+ * If you want to allow use of dynamic-power-control, pass the flag.
+ * Otherwise static always-on powercontrol will be used. */
+extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
+extern void ssb_commit_settings(struct ssb_bus *bus);
+
+/* Various helper functions */
+extern u32 ssb_admatch_base(u32 adm);
+extern u32 ssb_admatch_size(u32 adm);
+
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
+
+#endif /* LINUX_SSB_H_ */
diff --git a/include/compat/linux/ssb/ssb_driver_chipcommon.h b/include/compat/linux/ssb/ssb_driver_chipcommon.h
new file mode 100755
index 0000000..5a5d21d
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_driver_chipcommon.h
@@ -0,0 +1,665 @@
+#ifndef LINUX_SSB_CHIPCO_H_
+#define LINUX_SSB_CHIPCO_H_
+
+/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+
+/** ChipCommon core registers. **/
+
+#define SSB_CHIPCO_CHIPID		0x0000
+#define  SSB_CHIPCO_IDMASK		0x0000FFFF
+#define  SSB_CHIPCO_REVMASK		0x000F0000
+#define  SSB_CHIPCO_REVSHIFT		16
+#define  SSB_CHIPCO_PACKMASK		0x00F00000
+#define  SSB_CHIPCO_PACKSHIFT		20
+#define  SSB_CHIPCO_NRCORESMASK		0x0F000000
+#define  SSB_CHIPCO_NRCORESSHIFT	24
+#define SSB_CHIPCO_CAP			0x0004		/* Capabilities */
+#define  SSB_CHIPCO_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  SSB_CHIPCO_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  SSB_CHIPCO_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   SSB_CHIPCO_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  SSB_CHIPCO_CAP_UARTGPIO	0x00000020	/* UARTs on GPIO 15-12 */
+#define  SSB_CHIPCO_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  SSB_CHIPCO_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   SSB_CHIPCO_FLASHT_NONE	0x00000000	/* No flash */
+#define   SSB_CHIPCO_FLASHT_STSER	0x00000100	/* ST serial flash */
+#define   SSB_CHIPCO_FLASHT_ATSER	0x00000200	/* Atmel serial flash */
+#define	  SSB_CHIPCO_FLASHT_PARA	0x00000700	/* Parallel flash */
+#define  SSB_CHIPCO_CAP_PLLT		0x00038000	/* PLL Type */
+#define   SSB_PLLTYPE_NONE		0x00000000
+#define   SSB_PLLTYPE_1			0x00010000	/* 48Mhz base, 3 dividers */
+#define   SSB_PLLTYPE_2			0x00020000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_3			0x00030000	/* 25Mhz, 2 dividers */
+#define   SSB_PLLTYPE_4			0x00008000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_5			0x00018000	/* 25Mhz, 4 dividers */
+#define   SSB_PLLTYPE_6			0x00028000	/* 100/200 or 120/240 only */
+#define   SSB_PLLTYPE_7			0x00038000	/* 25Mhz, 4 dividers */
+#define  SSB_CHIPCO_CAP_PCTL		0x00040000	/* Power Control */
+#define  SSB_CHIPCO_CAP_OTPS		0x00380000	/* OTP size */
+#define  SSB_CHIPCO_CAP_OTPS_SHIFT	19
+#define  SSB_CHIPCO_CAP_OTPS_BASE	5
+#define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+#define SSB_CHIPCO_CORECTL		0x0008
+#define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  SSB_CHIPCO_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define SSB_CHIPCO_BIST			0x000C
+#define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
+#define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000
+#define	 SSB_CHIPCO_OTPS_PROTECT	0x00000007
+#define	 SSB_CHIPCO_OTPS_HW_PROTECT	0x00000001
+#define	 SSB_CHIPCO_OTPS_SW_PROTECT	0x00000002
+#define	 SSB_CHIPCO_OTPS_CID_PROTECT	0x00000004
+#define SSB_CHIPCO_OTPC			0x0014		/* OTP control */
+#define	 SSB_CHIPCO_OTPC_RECWAIT	0xFF000000
+#define	 SSB_CHIPCO_OTPC_PROGWAIT	0x00FFFF00
+#define	 SSB_CHIPCO_OTPC_PRW_SHIFT	8
+#define	 SSB_CHIPCO_OTPC_MAXFAIL	0x00000038
+#define	 SSB_CHIPCO_OTPC_VSEL		0x00000006
+#define	 SSB_CHIPCO_OTPC_SELVL		0x00000001
+#define SSB_CHIPCO_OTPP			0x0018		/* OTP prog */
+#define	 SSB_CHIPCO_OTPP_COL		0x000000FF
+#define	 SSB_CHIPCO_OTPP_ROW		0x0000FF00
+#define	 SSB_CHIPCO_OTPP_ROW_SHIFT	8
+#define	 SSB_CHIPCO_OTPP_READERR	0x10000000
+#define	 SSB_CHIPCO_OTPP_VALUE		0x20000000
+#define	 SSB_CHIPCO_OTPP_READ		0x40000000
+#define	 SSB_CHIPCO_OTPP_START		0x80000000
+#define	 SSB_CHIPCO_OTPP_BUSY		0x80000000
+#define SSB_CHIPCO_IRQSTAT		0x0020
+#define SSB_CHIPCO_IRQMASK		0x0024
+#define	 SSB_CHIPCO_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 SSB_CHIPCO_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 SSB_CHIPCO_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define SSB_CHIPCO_CHIPCTL		0x0028		/* Rev >= 11 only */
+#define SSB_CHIPCO_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define SSB_CHIPCO_JCMD			0x0030		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCMD_START		0x80000000
+#define  SSB_CHIPCO_JCMD_BUSY		0x80000000
+#define  SSB_CHIPCO_JCMD_PAUSE		0x40000000
+#define  SSB_CHIPCO_JCMD0_ACC_MASK	0x0000F000
+#define  SSB_CHIPCO_JCMD0_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD0_ACC_DR	0x00001000
+#define  SSB_CHIPCO_JCMD0_ACC_IR	0x00002000
+#define  SSB_CHIPCO_JCMD0_ACC_RESET	0x00003000
+#define  SSB_CHIPCO_JCMD0_ACC_IRPDR	0x00004000
+#define  SSB_CHIPCO_JCMD0_ACC_PDR	0x00005000
+#define  SSB_CHIPCO_JCMD0_IRW_MASK	0x00000F00
+#define  SSB_CHIPCO_JCMD_ACC_MASK	0x000F0000	/* Changes for corerev 11 */
+#define  SSB_CHIPCO_JCMD_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD_ACC_DR		0x00010000
+#define  SSB_CHIPCO_JCMD_ACC_IR		0x00020000
+#define  SSB_CHIPCO_JCMD_ACC_RESET	0x00030000
+#define  SSB_CHIPCO_JCMD_ACC_IRPDR	0x00040000
+#define  SSB_CHIPCO_JCMD_ACC_PDR	0x00050000
+#define  SSB_CHIPCO_JCMD_IRW_MASK	0x00001F00
+#define  SSB_CHIPCO_JCMD_IRW_SHIFT	8
+#define  SSB_CHIPCO_JCMD_DRW_MASK	0x0000003F
+#define SSB_CHIPCO_JIR			0x0034		/* Rev >= 10 only */
+#define SSB_CHIPCO_JDR			0x0038		/* Rev >= 10 only */
+#define SSB_CHIPCO_JCTL			0x003C		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCTL_FORCE_CLK	4		/* Force clock */
+#define  SSB_CHIPCO_JCTL_EXT_EN		2		/* Enable external targets */
+#define  SSB_CHIPCO_JCTL_EN		1		/* Enable Jtag master */
+#define SSB_CHIPCO_FLASHCTL		0x0040
+#define  SSB_CHIPCO_FLASHCTL_START	0x80000000
+#define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
+#define SSB_CHIPCO_FLASHADDR		0x0044
+#define SSB_CHIPCO_FLASHDATA		0x0048
+#define SSB_CHIPCO_BCAST_ADDR		0x0050
+#define SSB_CHIPCO_BCAST_DATA		0x0054
+#define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOIN		0x0060
+#define SSB_CHIPCO_GPIOOUT		0x0064
+#define SSB_CHIPCO_GPIOOUTEN		0x0068
+#define SSB_CHIPCO_GPIOCTL		0x006C
+#define SSB_CHIPCO_GPIOPOL		0x0070
+#define SSB_CHIPCO_GPIOIRQ		0x0074
+#define SSB_CHIPCO_WATCHDOG		0x0080
+#define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT	0
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME	0xFFFF0000
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
+#define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_CLOCK_N		0x0090
+#define SSB_CHIPCO_CLOCK_SB		0x0094
+#define SSB_CHIPCO_CLOCK_PCI		0x0098
+#define SSB_CHIPCO_CLOCK_M2		0x009C
+#define SSB_CHIPCO_CLOCK_MIPS		0x00A0
+#define SSB_CHIPCO_CLKDIV		0x00A4		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_CLKDIV_SFLASH	0x0F000000
+#define	 SSB_CHIPCO_CLKDIV_SFLASH_SHIFT	24
+#define	 SSB_CHIPCO_CLKDIV_OTP		0x000F0000
+#define	 SSB_CHIPCO_CLKDIV_OTP_SHIFT	16
+#define	 SSB_CHIPCO_CLKDIV_JTAG		0x00000F00
+#define	 SSB_CHIPCO_CLKDIV_JTAG_SHIFT	8
+#define	 SSB_CHIPCO_CLKDIV_UART		0x000000FF
+#define SSB_CHIPCO_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define SSB_CHIPCO_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define SSB_CHIPCO_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  SSB_CHIPCO_SLOWCLKCTL_SRC	0x00000007	/* slow clock source mask */
+#define	  SSB_CHIPCO_SLOWCLKCTL_SRC_LPO		0x00000000	/* source of slow clock is LPO */
+#define   SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  SSB_CHIPCO_SLOECLKCTL_SRC_PCI		0x00000002	/* source of slow clock is PCI */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  SSB_CHIPCO_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  SSB_CHIPCO_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  SSB_CHIPCO_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define SSB_CHIPCO_PCMCIA_CFG		0x0100
+#define SSB_CHIPCO_PCMCIA_MEMWAIT	0x0104
+#define SSB_CHIPCO_PCMCIA_ATTRWAIT	0x0108
+#define SSB_CHIPCO_PCMCIA_IOWAIT	0x010C
+#define SSB_CHIPCO_IDE_CFG		0x0110
+#define SSB_CHIPCO_IDE_MEMWAIT		0x0114
+#define SSB_CHIPCO_IDE_ATTRWAIT		0x0118
+#define SSB_CHIPCO_IDE_IOWAIT		0x011C
+#define SSB_CHIPCO_PROG_CFG		0x0120
+#define SSB_CHIPCO_PROG_WAITCNT		0x0124
+#define SSB_CHIPCO_FLASH_CFG		0x0128
+#define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00010000 /* ALP available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00020000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
+#define SSB_CHIPCO_UART0_DATA		0x0300
+#define SSB_CHIPCO_UART0_IMR		0x0304
+#define SSB_CHIPCO_UART0_FCR		0x0308
+#define SSB_CHIPCO_UART0_LCR		0x030C
+#define SSB_CHIPCO_UART0_MCR		0x0310
+#define SSB_CHIPCO_UART0_LSR		0x0314
+#define SSB_CHIPCO_UART0_MSR		0x0318
+#define SSB_CHIPCO_UART0_SCRATCH	0x031C
+#define SSB_CHIPCO_UART1_DATA		0x0400
+#define SSB_CHIPCO_UART1_IMR		0x0404
+#define SSB_CHIPCO_UART1_FCR		0x0408
+#define SSB_CHIPCO_UART1_LCR		0x040C
+#define SSB_CHIPCO_UART1_MCR		0x0410
+#define SSB_CHIPCO_UART1_LSR		0x0414
+#define SSB_CHIPCO_UART1_MSR		0x0418
+#define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM		1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B		0x00000200 /* 1 for 2b, 0 for to 2a */
+
+/** Macros to determine SPROM presence based on Chip-Status register. */
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
+	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL)
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
+	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
+	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
+	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL))
+
+
+
+/** Clockcontrol masks and values **/
+
+/* SSB_CHIPCO_CLOCK_N */
+#define	SSB_CHIPCO_CLK_N1		0x0000003F	/* n1 control */
+#define	SSB_CHIPCO_CLK_N2		0x00003F00	/* n2 control */
+#define	SSB_CHIPCO_CLK_N2_SHIFT		8
+#define	SSB_CHIPCO_CLK_PLLC		0x000F0000	/* pll control */
+#define	SSB_CHIPCO_CLK_PLLC_SHIFT	16
+
+/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
+#define	SSB_CHIPCO_CLK_M1		0x0000003F	/* m1 control */
+#define	SSB_CHIPCO_CLK_M2		0x00003F00	/* m2 control */
+#define	SSB_CHIPCO_CLK_M2_SHIFT		8
+#define	SSB_CHIPCO_CLK_M3		0x003F0000	/* m3 control */
+#define	SSB_CHIPCO_CLK_M3_SHIFT		16
+#define	SSB_CHIPCO_CLK_MC		0x1F000000	/* mux control */
+#define	SSB_CHIPCO_CLK_MC_SHIFT		24
+
+/* N3M Clock control magic field values */
+#define	SSB_CHIPCO_CLK_F6_2		0x02		/* A factor of 2 in */
+#define	SSB_CHIPCO_CLK_F6_3		0x03		/* 6-bit fields like */
+#define	SSB_CHIPCO_CLK_F6_4		0x05		/* N1, M1 or M3 */
+#define	SSB_CHIPCO_CLK_F6_5		0x09
+#define	SSB_CHIPCO_CLK_F6_6		0x11
+#define	SSB_CHIPCO_CLK_F6_7		0x21
+
+#define	SSB_CHIPCO_CLK_F5_BIAS		5		/* 5-bit fields get this added */
+
+#define	SSB_CHIPCO_CLK_MC_BYPASS	0x08
+#define	SSB_CHIPCO_CLK_MC_M1		0x04
+#define	SSB_CHIPCO_CLK_MC_M1M2		0x02
+#define	SSB_CHIPCO_CLK_MC_M1M2M3	0x01
+#define	SSB_CHIPCO_CLK_MC_M1M3		0x11
+
+/* Type 2 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T2_BIAS		2		/* n1, n2, m1 & m3 bias */
+#define	SSB_CHIPCO_CLK_T2M2_BIAS	3		/* m2 bias */
+
+#define	SSB_CHIPCO_CLK_T2MC_M1BYP	1
+#define	SSB_CHIPCO_CLK_T2MC_M2BYP	2
+#define	SSB_CHIPCO_CLK_T2MC_M3BYP	4
+
+/* Type 6 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T6_MMASK		1		/* bits of interest in m */
+#define	SSB_CHIPCO_CLK_T6_M0		120000000	/* sb clock for m = 0 */
+#define	SSB_CHIPCO_CLK_T6_M1		100000000	/* sb clock for m = 1 */
+#define	SSB_CHIPCO_CLK_SB2MIPS_T6(sb)	(2 * (sb))
+
+/* Common clock base */
+#define	SSB_CHIPCO_CLK_BASE1		24000000	/* Half the clock freq */
+#define SSB_CHIPCO_CLK_BASE2		12500000	/* Alternate crystal on some PLL's */
+
+/* Clock control values for 200Mhz in 5350 */
+#define	SSB_CHIPCO_CLK_5350_N		0x0311
+#define	SSB_CHIPCO_CLK_5350_M		0x04020009
+
+
+/** Bits in the config registers **/
+
+#define	SSB_CHIPCO_CFG_EN		0x0001		/* Enable */
+#define	SSB_CHIPCO_CFG_EXTM		0x000E		/* Extif Mode */
+#define	 SSB_CHIPCO_CFG_EXTM_ASYNC	0x0002		/* Async/Parallel flash */
+#define	 SSB_CHIPCO_CFG_EXTM_SYNC	0x0004		/* Synchronous */
+#define	 SSB_CHIPCO_CFG_EXTM_PCMCIA	0x0008		/* PCMCIA */
+#define	 SSB_CHIPCO_CFG_EXTM_IDE	0x000A		/* IDE */
+#define	SSB_CHIPCO_CFG_DS16		0x0010		/* Data size, 0=8bit, 1=16bit */
+#define	SSB_CHIPCO_CFG_CLKDIV		0x0060		/* Sync: Clock divisor */
+#define	SSB_CHIPCO_CFG_CLKEN		0x0080		/* Sync: Clock enable */
+#define	SSB_CHIPCO_CFG_BSTRO		0x0100		/* Sync: Size/Bytestrobe */
+
+
+/** Flash-specific control/status values */
+
+/* flashcontrol opcodes for ST flashes */
+#define SSB_CHIPCO_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
+#define SSB_CHIPCO_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
+#define SSB_CHIPCO_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
+#define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
+#define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
+
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
+#define SSB_CHIPCO_FLASHSTA_ST_WEL	0x02		/* Write Enable Latch */
+#define SSB_CHIPCO_FLASHSTA_ST_BP	0x1C		/* Block Protect */
+#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT	2
+#define SSB_CHIPCO_FLASHSTA_ST_SRWD	0x80		/* Status Register Write Disable */
+
+/* flashcontrol opcodes for Atmel flashes */
+#define SSB_CHIPCO_FLASHCTL_AT_READ		0x07E8
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ	0x07D2
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_STATUS		0x01D7
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE	0x0384
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE	0x0387
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM	0x0283	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM	0x0286	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM	0x0288
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM	0x0289
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE	0x0281
+#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE	0x0250
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM	0x0382	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM	0x0385	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD	0x0253
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD	0x0255
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE	0x0260
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE	0x0261
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM	0x0258
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM	0x0259
+
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHSTA_AT_READY	0x80
+#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH	0x40
+#define SSB_CHIPCO_FLASHSTA_AT_ID	0x38
+#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT	3
+
+
+/** OTP **/
+
+/* OTP regions */
+#define	SSB_CHIPCO_OTP_HW_REGION	SSB_CHIPCO_OTPS_HW_PROTECT
+#define	SSB_CHIPCO_OTP_SW_REGION	SSB_CHIPCO_OTPS_SW_PROTECT
+#define	SSB_CHIPCO_OTP_CID_REGION	SSB_CHIPCO_OTPS_CID_PROTECT
+
+/* OTP regions (Byte offsets from otp size) */
+#define	SSB_CHIPCO_OTP_SWLIM_OFF	(-8)
+#define	SSB_CHIPCO_OTP_CIDBASE_OFF	0
+#define	SSB_CHIPCO_OTP_CIDLIM_OFF	8
+
+/* Predefined OTP words (Word offset from otp size) */
+#define	SSB_CHIPCO_OTP_BOUNDARY_OFF	(-4)
+#define	SSB_CHIPCO_OTP_HWSIGN_OFF	(-3)
+#define	SSB_CHIPCO_OTP_SWSIGN_OFF	(-2)
+#define	SSB_CHIPCO_OTP_CIDSIGN_OFF	(-1)
+
+#define	SSB_CHIPCO_OTP_CID_OFF		0
+#define	SSB_CHIPCO_OTP_PKG_OFF		1
+#define	SSB_CHIPCO_OTP_FID_OFF		2
+#define	SSB_CHIPCO_OTP_RSV_OFF		3
+#define	SSB_CHIPCO_OTP_LIM_OFF		4
+
+#define	SSB_CHIPCO_OTP_SIGNATURE	0x578A
+#define	SSB_CHIPCO_OTP_MAGIC		0x4E56
+
+
+struct ssb_device;
+struct ssb_serial_port;
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct ssb_chipcommon {
+	struct ssb_device *dev;
+	u32 capabilities;
+	u32 status;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
+};
+
+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
+{
+	return (cc->dev != NULL);
+}
+
+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
+extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
+extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+                                    u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+					u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+				   unsigned long ns_per_cycle);
+
+enum ssb_clkmode {
+	SSB_CLKMODE_SLOW,
+	SSB_CLKMODE_FAST,
+	SSB_CLKMODE_DYNAMIC,
+};
+
+extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+				     enum ssb_clkmode mode);
+
+extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
+					  u32 ticks);
+
+void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+				  struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+enum ssb_pmu_ldo_volt_id {
+	LDO_PAREF = 0,
+	LDO_VOLT1,
+	LDO_VOLT2,
+	LDO_VOLT3,
+};
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+
+#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/compat/linux/ssb/ssb_driver_extif.h b/include/compat/linux/ssb/ssb_driver_extif.h
new file mode 100755
index 0000000..91161f0
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_driver_extif.h
@@ -0,0 +1,214 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifndef LINUX_SSB_EXTIFCORE_H_
+#define LINUX_SSB_EXTIFCORE_H_
+
+/* external interface address space */
+#define	SSB_EXTIF_PCMCIA_MEMBASE(x)	(x)
+#define	SSB_EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
+#define	SSB_EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
+#define	SSB_EXTIF_CFGIF_BASE(x)		((x) + 0x800000)
+#define	SSB_EXTIF_FLASH_BASE(x)		((x) + 0xc00000)
+
+#define SSB_EXTIF_NR_GPIOOUT		5
+/* GPIO NOTE:
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ * Use the following helper macro to get a register offset value.
+ */
+#define SSB_EXTIF_GPIO_OUT(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8);	\
+					})
+#define SSB_EXTIF_GPIO_OUTEN(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8);	\
+					})
+
+/** EXTIF core registers **/
+
+#define SSB_EXTIF_CTL			0x0000
+#define  SSB_EXTIF_CTL_UARTEN		(1 << 0) /* UART enable */
+#define SSB_EXTIF_EXTSTAT		0x0004
+#define  SSB_EXTIF_EXTSTAT_EMODE	(1 << 0) /* Endian mode (ro) */
+#define  SSB_EXTIF_EXTSTAT_EIRQPIN	(1 << 1) /* External interrupt pin (ro) */
+#define  SSB_EXTIF_EXTSTAT_GPIOIRQPIN	(1 << 2) /* GPIO interrupt pin (ro) */
+#define SSB_EXTIF_PCMCIA_CFG		0x0010
+#define SSB_EXTIF_PCMCIA_MEMWAIT	0x0014
+#define SSB_EXTIF_PCMCIA_ATTRWAIT	0x0018
+#define SSB_EXTIF_PCMCIA_IOWAIT		0x001C
+#define SSB_EXTIF_PROG_CFG		0x0020
+#define SSB_EXTIF_PROG_WAITCNT		0x0024
+#define SSB_EXTIF_FLASH_CFG		0x0028
+#define SSB_EXTIF_FLASH_WAITCNT		0x002C
+#define SSB_EXTIF_WATCHDOG		0x0040
+#define SSB_EXTIF_CLOCK_N		0x0044
+#define SSB_EXTIF_CLOCK_SB		0x0048
+#define SSB_EXTIF_CLOCK_PCI		0x004C
+#define SSB_EXTIF_CLOCK_MII		0x0050
+#define SSB_EXTIF_GPIO_IN		0x0060
+#define SSB_EXTIF_GPIO_OUT_BASE		0x0064
+#define SSB_EXTIF_GPIO_OUTEN_BASE	0x0068
+#define SSB_EXTIF_EJTAG_OUTEN		0x0090
+#define SSB_EXTIF_GPIO_INTPOL		0x0094
+#define SSB_EXTIF_GPIO_INTMASK		0x0098
+#define SSB_EXTIF_UART_DATA		0x0300
+#define SSB_EXTIF_UART_TIMER		0x0310
+#define SSB_EXTIF_UART_FCR		0x0320
+#define SSB_EXTIF_UART_LCR		0x0330
+#define SSB_EXTIF_UART_MCR		0x0340
+#define SSB_EXTIF_UART_LSR		0x0350
+#define SSB_EXTIF_UART_MSR		0x0360
+#define SSB_EXTIF_UART_SCRATCH		0x0370
+
+
+
+
+/* pcmcia/prog/flash_config */
+#define	SSB_EXTCFG_EN			(1 << 0)	/* enable */
+#define	SSB_EXTCFG_MODE			0xE		/* mode */
+#define	SSB_EXTCFG_MODE_SHIFT		1
+#define	 SSB_EXTCFG_MODE_FLASH		0x0		/* flash/asynchronous mode */
+#define	 SSB_EXTCFG_MODE_SYNC		0x2		/* synchronous mode */
+#define	 SSB_EXTCFG_MODE_PCMCIA		0x4		/* pcmcia mode */
+#define	SSB_EXTCFG_DS16			(1 << 4)	/* destsize:  0=8bit, 1=16bit */
+#define	SSB_EXTCFG_BSWAP		(1 << 5)	/* byteswap */
+#define	SSB_EXTCFG_CLKDIV		0xC0		/* clock divider */
+#define	SSB_EXTCFG_CLKDIV_SHIFT		6
+#define	 SSB_EXTCFG_CLKDIV_2		0x0		/* backplane/2 */
+#define	 SSB_EXTCFG_CLKDIV_3		0x40		/* backplane/3 */
+#define	 SSB_EXTCFG_CLKDIV_4		0x80		/* backplane/4 */
+#define	SSB_EXTCFG_CLKEN		(1 << 8)	/* clock enable */
+#define	SSB_EXTCFG_STROBE		(1 << 9)	/* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define	SSB_PCMCIA_MEMW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_MEMW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_MEMW_1_SHIFT		8
+#define	SSB_PCMCIA_MEMW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_MEMW_2_SHIFT		16
+#define	SSB_PCMCIA_MEMW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_MEMW_3_SHIFT		24
+
+/* pcmcia_attrwait */
+#define	SSB_PCMCIA_ATTW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_ATTW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_ATTW_1_SHIFT		8
+#define	SSB_PCMCIA_ATTW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_ATTW_2_SHIFT		16
+#define	SSB_PCMCIA_ATTW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_ATTW_3_SHIFT		24
+
+/* pcmcia_iowait */
+#define	SSB_PCMCIA_IOW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_IOW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_IOW_1_SHIFT		8
+#define	SSB_PCMCIA_IOW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_IOW_2_SHIFT		16
+#define	SSB_PCMCIA_IOW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_IOW_3_SHIFT		24
+
+/* prog_waitcount */
+#define	SSB_PROG_WCNT_0			0x0000001F	/* waitcount0 */
+#define	SSB_PROG_WCNT_1			0x00001F00	/* waitcount1 */
+#define	SSB_PROG_WCNT_1_SHIFT		8
+#define	SSB_PROG_WCNT_2			0x001F0000	/* waitcount2 */
+#define	SSB_PROG_WCNT_2_SHIFT		16
+#define	SSB_PROG_WCNT_3			0x1F000000	/* waitcount3 */
+#define	SSB_PROG_WCNT_3_SHIFT		24
+
+#define SSB_PROG_W0			0x0000000C
+#define SSB_PROG_W1			0x00000A00
+#define SSB_PROG_W2			0x00020000
+#define SSB_PROG_W3			0x01000000
+
+/* flash_waitcount */
+#define	SSB_FLASH_WCNT_0		0x0000001F	/* waitcount0 */
+#define	SSB_FLASH_WCNT_1		0x00001F00	/* waitcount1 */
+#define	SSB_FLASH_WCNT_1_SHIFT		8
+#define	SSB_FLASH_WCNT_2		0x001F0000	/* waitcount2 */
+#define	SSB_FLASH_WCNT_2_SHIFT		16
+#define	SSB_FLASH_WCNT_3		0x1F000000	/* waitcount3 */
+#define	SSB_FLASH_WCNT_3_SHIFT		24
+
+/* watchdog */
+#define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
+
+
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+
+struct ssb_extif {
+	struct ssb_device *dev;
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return (extif->dev != NULL);
+}
+
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			               u32 *plltype, u32 *n, u32 *m);
+
+extern void ssb_extif_timing_init(struct ssb_extif *extif,
+				  unsigned long ns);
+
+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+					 u32 ticks);
+
+/* Extif GPIO pin access */
+u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_extif_serial_init(struct ssb_extif *extif,
+				 struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+
+#else /* CONFIG_SSB_DRIVER_EXTIF */
+/* extif disabled */
+
+struct ssb_extif {
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return 0;
+}
+
+static inline
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			        u32 *plltype, u32 *n, u32 *m)
+{
+}
+
+static inline
+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+				  u32 ticks)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_EXTIF */
+#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/include/compat/linux/ssb/ssb_driver_gige.h b/include/compat/linux/ssb/ssb_driver_gige.h
new file mode 100755
index 0000000..eba52a1
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,179 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+
+
+#define SSB_GIGE_PCIIO			0x0000 /* PCI I/O Registers (1024 bytes) */
+#define SSB_GIGE_RESERVED		0x0400 /* Reserved (1024 bytes) */
+#define SSB_GIGE_PCICFG			0x0800 /* PCI config space (256 bytes) */
+#define SSB_GIGE_SHIM_FLUSHSTAT		0x0C00 /* PCI to OCP: Flush status control (32bit) */
+#define SSB_GIGE_SHIM_FLUSHRDA		0x0C04 /* PCI to OCP: Flush read address (32bit) */
+#define SSB_GIGE_SHIM_FLUSHTO		0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
+#define SSB_GIGE_SHIM_BARRIER		0x0C0C /* PCI to OCP: Barrier register (32bit) */
+#define SSB_GIGE_SHIM_MAOCPSI		0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
+#define SSB_GIGE_SHIM_SIOCPMA		0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
+
+/* TM Status High flags */
+#define SSB_GIGE_TMSHIGH_RGMII		0x00010000 /* Have an RGMII PHY-bus */
+/* TM Status Low flags */
+#define SSB_GIGE_TMSLOW_TXBYPASS	0x00080000 /* TX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_RXBYPASS	0x00100000 /* RX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_DLLEN		0x01000000 /* Enable DLL controls */
+
+/* Boardflags (low) */
+#define SSB_GIGE_BFL_ROBOSWITCH		0x0010
+
+
+#define SSB_GIGE_MEM_RES_NAME		"SSB Broadcom 47xx GigE memory"
+#define SSB_GIGE_IO_RES_NAME		"SSB Broadcom 47xx GigE I/O"
+
+struct ssb_gige {
+	struct ssb_device *dev;
+
+	spinlock_t lock;
+
+	/* True, if the device has an RGMII bus.
+	 * False, if the device has a GMII bus. */
+	bool has_rgmii;
+
+	/* The PCI controller device. */
+	struct pci_controller pci_controller;
+	struct pci_ops pci_ops;
+	struct resource mem_resource;
+	struct resource io_resource;
+};
+
+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
+
+/* Convert a pci_dev pointer to a ssb_gige pointer. */
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+	if (!pdev_is_ssb_gige_core(pdev))
+		return NULL;
+	return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
+}
+
+/* Returns whether the PHY is connected by an RGMII bus. */
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	return (dev ? dev->has_rgmii : 0);
+}
+
+/* Returns whether we have a Roboswitch. */
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return !!(dev->dev->bus->sprom.boardflags_lo &
+			  SSB_GIGE_BFL_ROBOSWITCH);
+	return 0;
+}
+
+/* Returns whether we can only do one DMA at once. */
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return ((dev->dev->bus->chip_id == 0x4785) &&
+			(dev->dev->bus->chip_rev < 2));
+	return 0;
+}
+
+/* Returns whether we must flush posted writes. */
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return (dev->dev->bus->chip_id == 0x4785);
+	return 0;
+}
+
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
+/* Get the device MAC address */
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+	char buf[20];
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+		return;
+	nvram_parse_macaddr(buf, macaddr);
+}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
+
+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+					  struct pci_dev *pdev);
+extern int ssb_gige_map_irq(struct ssb_device *sdev,
+			    const struct pci_dev *pdev);
+
+/* The GigE driver is not a standalone module, because we don't have support
+ * for unregistering the driver. So we could not unload the module anyway. */
+extern int ssb_gige_init(void);
+static inline void ssb_gige_exit(void)
+{
+	/* Currently we can not unregister the GigE driver,
+	 * because we can not unregister the PCI bridge. */
+	BUG();
+}
+
+
+#else /* CONFIG_SSB_DRIVER_GIGE */
+/* Gigabit Ethernet driver disabled */
+
+
+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+						 struct pci_dev *pdev)
+{
+	return -ENOSYS;
+}
+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
+				   const struct pci_dev *pdev)
+{
+	return -ENOSYS;
+}
+static inline int ssb_gige_init(void)
+{
+	return 0;
+}
+static inline void ssb_gige_exit(void)
+{
+}
+
+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+	return NULL;
+}
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/include/compat/linux/ssb/ssb_driver_mips.h b/include/compat/linux/ssb/ssb_driver_mips.h
new file mode 100755
index 0000000..5f44e97
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_driver_mips.h
@@ -0,0 +1,46 @@
+#ifndef LINUX_SSB_MIPSCORE_H_
+#define LINUX_SSB_MIPSCORE_H_
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+
+struct ssb_device;
+
+struct ssb_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+
+
+struct ssb_mipscore {
+	struct ssb_device *dev;
+
+	int nr_serial_ports;
+	struct ssb_serial_port serial_ports[4];
+
+	u8 flash_buswidth;
+	u32 flash_window;
+	u32 flash_window_size;
+};
+
+extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
+
+extern unsigned int ssb_mips_irq(struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_MIPS */
+
+struct ssb_mipscore {
+};
+
+static inline
+void ssb_mipscore_init(struct ssb_mipscore *mcore)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_MIPS */
+
+#endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/include/compat/linux/ssb/ssb_driver_pci.h b/include/compat/linux/ssb/ssb_driver_pci.h
new file mode 100755
index 0000000..41e330e
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_driver_pci.h
@@ -0,0 +1,130 @@
+#ifndef LINUX_SSB_PCICORE_H_
+#define LINUX_SSB_PCICORE_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+
+/* PCI core registers. */
+#define SSB_PCICORE_CTL			0x0000	/* PCI Control */
+#define  SSB_PCICORE_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  SSB_PCICORE_CTL_RST		0x00000002 /* PCI_RESET driven out to pin */
+#define  SSB_PCICORE_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  SSB_PCICORE_CTL_CLK		0x00000008 /* Gate for clock driven out to pin */
+#define SSB_PCICORE_ARBCTL		0x0010	/* PCI Arbiter Control */
+#define  SSB_PCICORE_ARBCTL_INTERN	0x00000001 /* Use internal arbiter */
+#define  SSB_PCICORE_ARBCTL_EXTERN	0x00000002 /* Use external arbiter */
+#define  SSB_PCICORE_ARBCTL_PARKID	0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   SSB_PCICORE_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   SSB_PCICORE_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define SSB_PCICORE_ISTAT		0x0020	/* Interrupt status */
+#define  SSB_PCICORE_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_IMASK		0x0024	/* Interrupt mask */
+#define  SSB_PCICORE_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  SSB_PCICORE_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  SSB_PCICORE_IMASK_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_MBOX		0x0028	/* Backplane to PCI Mailbox */
+#define  SSB_PCICORE_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  SSB_PCICORE_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  SSB_PCICORE_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  SSB_PCICORE_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  SSB_PCICORE_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  SSB_PCICORE_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  SSB_PCICORE_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  SSB_PCICORE_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define SSB_PCICORE_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  SSB_PCICORE_BCAST_ADDR_MASK	0x000000FF
+#define SSB_PCICORE_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define SSB_PCICORE_GPIO_IN		0x0060	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_OUT		0x0064	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_CTL		0x006C	/* rev >= 2 only */
+#define SSB_PCICORE_SBTOPCI0		0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  SSB_PCICORE_SBTOPCI0_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI1		0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  SSB_PCICORE_SBTOPCI1_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI2		0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  SSB_PCICORE_SBTOPCI2_MASK	0xC0000000
+#define SSB_PCICORE_PCICFG0		0x0400	/* PCI config space 0 (rev >= 8) */
+#define SSB_PCICORE_PCICFG1		0x0500	/* PCI config space 1 (rev >= 8) */
+#define SSB_PCICORE_PCICFG2		0x0600	/* PCI config space 2 (rev >= 8) */
+#define SSB_PCICORE_PCICFG3		0x0700	/* PCI config space 3 (rev >= 8) */
+#define SSB_PCICORE_SPROM(wordoffset)	(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define SSB_PCICORE_SBTOPCI_MEM		0x00000000
+#define SSB_PCICORE_SBTOPCI_IO		0x00000001
+#define SSB_PCICORE_SBTOPCI_CFG0	0x00000002
+#define SSB_PCICORE_SBTOPCI_CFG1	0x00000003
+#define SSB_PCICORE_SBTOPCI_PREF	0x00000004 /* Prefetch enable */
+#define SSB_PCICORE_SBTOPCI_BURST	0x00000008 /* Burst enable */
+#define SSB_PCICORE_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define SSB_PCICORE_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  SSB_PCICORE_SBTOPCI_RC_READ	0x00000000 /* Memory read */
+#define  SSB_PCICORE_SBTOPCI_RC_READL	0x00000010 /* Memory read line */
+#define  SSB_PCICORE_SBTOPCI_RC_READM	0x00000020 /* Memory read multiple */
+
+
+/* PCIcore specific boardflags */
+#define SSB_PCICORE_BFL_NOPCI		0x00000400 /* Board leaves PCI floating */
+
+
+struct ssb_pcicore {
+	struct ssb_device *dev;
+	u8 setup_done:1;
+	u8 hostmode:1;
+	u8 cardbusmode:1;
+};
+
+extern void ssb_pcicore_init(struct ssb_pcicore *pc);
+
+/* Enable IRQ routing for a specific device */
+extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+					  struct ssb_device *dev);
+
+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+
+#else /* CONFIG_SSB_DRIVER_PCICORE */
+
+
+struct ssb_pcicore {
+};
+
+static inline
+void ssb_pcicore_init(struct ssb_pcicore *pc)
+{
+}
+
+static inline
+int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+				   struct ssb_device *dev)
+{
+	return 0;
+}
+
+static inline
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+	return -ENODEV;
+}
+static inline
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+#endif /* LINUX_SSB_PCICORE_H_ */
diff --git a/include/compat/linux/ssb/ssb_embedded.h b/include/compat/linux/ssb/ssb_embedded.h
new file mode 100755
index 0000000..8d8dedf
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_embedded.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_SSB_EMBEDDED_H_
+#define LINUX_SSB_EMBEDDED_H_
+
+#include <linux/types.h>
+#include <linux/ssb/ssb.h>
+
+
+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+
+/* Generic GPIO API */
+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+
+#endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/include/compat/linux/ssb/ssb_regs.h b/include/compat/linux/ssb/ssb_regs.h
new file mode 100755
index 0000000..d4b0cdf
--- /dev/null
+++ b/include/compat/linux/ssb/ssb_regs.h
@@ -0,0 +1,543 @@
+#ifndef LINUX_SSB_REGS_H_
+#define LINUX_SSB_REGS_H_
+
+
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SSB_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
+#define SSB_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define SSB_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
+#define SSB_ENUM_BASE		0x18000000U	/* Enumeration space base */
+#define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
+
+#define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
+#define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
+
+#define	SSB_EXTIF_BASE		0x1f000000U	/* External Interface region base address */
+#define	SSB_FLASH1		0x1fc00000U	/* Flash Region 1 */
+#define	SSB_FLASH1_SZ		0x00400000U	/* Size of Flash Region 1 */
+
+#define SSB_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define SSB_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
+#define SSB_PCIE_DMA_L32	0x00000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
+#define SSB_PCIE_DMA_H32	0x80000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
+#define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
+
+
+/* Enumeration space constants */
+#define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
+#define SSB_MAX_NR_CORES	((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
+
+
+/* mips address */
+#define	SSB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
+
+
+/* SSB PCI config space registers. */
+#define SSB_PMCSR		0x44
+#define  SSB_PE			0x100
+#define	SSB_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define	SSB_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define	SSB_SPROMCTL		0x88	/* SPROM control */
+#define  SSB_SPROMCTL_WE	0x10	/* SPROM write enable */
+#define	SSB_BAR1_CONTROL	0x8c	/* Address space 1 burst control */
+#define SSB_PCI_IRQS		0x90	/* PCI interrupts */
+#define SSB_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define SSB_BACKPLANE_IRQS	0x98	/* Backplane Interrupts */
+#define SSB_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define SSB_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define SSB_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  SSB_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  SSB_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  SSB_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  SSB_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+
+#define SSB_BAR0_MAX_RETRIES	50
+
+/* Silicon backplane configuration register definitions */
+#define SSB_IPSFLAG		0x0F08
+#define	 SSB_IPSFLAG_IRQ1	0x0000003F /* which sbflags get routed to mips interrupt 1 */
+#define	 SSB_IPSFLAG_IRQ1_SHIFT	0
+#define	 SSB_IPSFLAG_IRQ2	0x00003F00 /* which sbflags get routed to mips interrupt 2 */
+#define	 SSB_IPSFLAG_IRQ2_SHIFT	8
+#define	 SSB_IPSFLAG_IRQ3	0x003F0000 /* which sbflags get routed to mips interrupt 3 */
+#define	 SSB_IPSFLAG_IRQ3_SHIFT	16
+#define	 SSB_IPSFLAG_IRQ4	0x3F000000 /* which sbflags get routed to mips interrupt 4 */
+#define	 SSB_IPSFLAG_IRQ4_SHIFT	24
+#define SSB_TPSFLAG		0x0F18
+#define  SSB_TPSFLAG_BPFLAG	0x0000003F /* Backplane flag # */
+#define  SSB_TPSFLAG_ALWAYSIRQ	0x00000040 /* IRQ is always sent on the Backplane */
+#define SSB_TMERRLOGA		0x0F48
+#define SSB_TMERRLOG		0x0F50
+#define SSB_ADMATCH3		0x0F60
+#define SSB_ADMATCH2		0x0F68
+#define SSB_ADMATCH1		0x0F70
+#define SSB_IMSTATE		0x0F90     /* SB Initiator Agent State */
+#define  SSB_IMSTATE_PC		0x0000000f /* Pipe Count */
+#define  SSB_IMSTATE_AP_MASK	0x00000030 /* Arbitration Priority */
+#define  SSB_IMSTATE_AP_BOTH	0x00000000 /* Use both timeslices and token */
+#define  SSB_IMSTATE_AP_TS	0x00000010 /* Use timeslices only */
+#define  SSB_IMSTATE_AP_TK	0x00000020 /* Use token only */
+#define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
+#define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
+#define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
+#define  SSB_IMSTATE_BUSY	0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define  SSB_IMSTATE_REJECT	0x02000000 /* Reject (Backplane rev >= 2.3 only) */
+#define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
+#define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
+#define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
+#define  SSB_INTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
+#define  SSB_INTVEC_CODEC	0x00000008 /* Enable interrupts for v90 codec */
+#define  SSB_INTVEC_USB		0x00000010 /* Enable interrupts for usb */
+#define  SSB_INTVEC_EXTIF	0x00000020 /* Enable interrupts for external i/f */
+#define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
+#define SSB_TMSLOW		0x0F98     /* SB Target State Low */
+#define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
+#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject (Standard Backplane) */
+#define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
+#define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
+#define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
+#define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
+#define  SSB_TMSLOW_BE		0x80000000 /* BIST Enable */
+#define SSB_TMSHIGH		0x0F9C     /* SB Target State High */
+#define  SSB_TMSHIGH_SERR	0x00000001 /* S-error */
+#define  SSB_TMSHIGH_INT	0x00000002 /* Interrupt */
+#define  SSB_TMSHIGH_BUSY	0x00000004 /* Busy */
+#define  SSB_TMSHIGH_TO		0x00000020 /* Timeout. Backplane rev >= 2.3 only */
+#define  SSB_TMSHIGH_COREFL	0x1FFF0000 /* Core specific flags */
+#define  SSB_TMSHIGH_COREFL_SHIFT	16
+#define  SSB_TMSHIGH_DMA64	0x10000000 /* 64bit DMA supported */
+#define  SSB_TMSHIGH_GCR	0x20000000 /* Gated Clock Request */
+#define  SSB_TMSHIGH_BISTF	0x40000000 /* BIST Failed */
+#define  SSB_TMSHIGH_BISTD	0x80000000 /* BIST Done */
+#define SSB_BWA0		0x0FA0
+#define SSB_IMCFGLO		0x0FA8
+#define  SSB_IMCFGLO_SERTO	0x00000007 /* Service timeout */
+#define  SSB_IMCFGLO_REQTO	0x00000070 /* Request timeout */
+#define  SSB_IMCFGLO_REQTO_SHIFT	4
+#define  SSB_IMCFGLO_CONNID	0x00FF0000 /* Connection ID */
+#define  SSB_IMCFGLO_CONNID_SHIFT	16
+#define SSB_IMCFGHI		0x0FAC
+#define SSB_ADMATCH0		0x0FB0
+#define SSB_TMCFGLO		0x0FB8
+#define SSB_TMCFGHI		0x0FBC
+#define SSB_BCONFIG		0x0FC0
+#define SSB_BSTATE		0x0FC8
+#define SSB_ACTCFG		0x0FD8
+#define SSB_FLAGST		0x0FE8
+#define SSB_IDLOW		0x0FF8
+#define  SSB_IDLOW_CFGSP	0x00000003 /* Config Space */
+#define  SSB_IDLOW_ADDRNGE	0x00000038 /* Address Ranges supported */
+#define  SSB_IDLOW_ADDRNGE_SHIFT	3
+#define  SSB_IDLOW_SYNC		0x00000040
+#define  SSB_IDLOW_INITIATOR	0x00000080
+#define  SSB_IDLOW_MIBL		0x00000F00 /* Minimum Backplane latency */
+#define  SSB_IDLOW_MIBL_SHIFT	8
+#define  SSB_IDLOW_MABL		0x0000F000 /* Maximum Backplane latency */
+#define  SSB_IDLOW_MABL_SHIFT	12
+#define  SSB_IDLOW_TIF		0x00010000 /* This Initiator is first */
+#define  SSB_IDLOW_CCW		0x000C0000 /* Cycle counter width */
+#define  SSB_IDLOW_CCW_SHIFT	18
+#define  SSB_IDLOW_TPT		0x00F00000 /* Target ports */
+#define  SSB_IDLOW_TPT_SHIFT	20
+#define  SSB_IDLOW_INITP	0x0F000000 /* Initiator ports */
+#define  SSB_IDLOW_INITP_SHIFT	24
+#define  SSB_IDLOW_SSBREV	0xF0000000 /* Sonics Backplane Revision code */
+#define  SSB_IDLOW_SSBREV_22	0x00000000 /* <= 2.2 */
+#define  SSB_IDLOW_SSBREV_23	0x10000000 /* 2.3 */
+#define  SSB_IDLOW_SSBREV_24	0x40000000 /* ?? Found in BCM4328 */
+#define  SSB_IDLOW_SSBREV_25	0x50000000 /* ?? Not Found yet */
+#define  SSB_IDLOW_SSBREV_26	0x60000000 /* ?? Found in some BCM4311/2 */
+#define  SSB_IDLOW_SSBREV_27	0x70000000 /* ?? Found in some BCM4311/2 */
+#define SSB_IDHIGH		0x0FFC     /* SB Identification High */
+#define  SSB_IDHIGH_RCLO	0x0000000F /* Revision Code (low part) */
+#define  SSB_IDHIGH_CC		0x00008FF0 /* Core Code */
+#define  SSB_IDHIGH_CC_SHIFT	4
+#define  SSB_IDHIGH_RCHI	0x00007000 /* Revision Code (high part) */
+#define  SSB_IDHIGH_RCHI_SHIFT	8	   /* yes, shift 8 is right */
+#define  SSB_IDHIGH_VC		0xFFFF0000 /* Vendor Code */
+#define  SSB_IDHIGH_VC_SHIFT	16
+
+/* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+ * in two-byte quantities.
+ */
+#define SSB_SPROMSIZE_WORDS		64
+#define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
+#define SSB_SPROMSIZE_WORDS_R123	64
+#define SSB_SPROMSIZE_WORDS_R4		220
+#define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+#define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+#define SSB_SPROM_BASE1			0x1000
+#define SSB_SPROM_BASE31		0x0800
+#define SSB_SPROM_REVISION		0x007E
+#define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+#define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+#define  SSB_SPROM_REVISION_CRC_SHIFT	8
+
+/* SPROM Revision 1 */
+#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+#define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+#define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+#define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+#define SSB_SPROM1_BINF			0x005C	/* Board info */
+#define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+#define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+#define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+#define  SSB_SPROM1_BINF_ANTBG		0x3000	/* Available B-PHY and G-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+#define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+#define SSB_SPROM1_PA0B0		0x005E
+#define SSB_SPROM1_PA0B1		0x0060
+#define SSB_SPROM1_PA0B2		0x0062
+#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+#define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+#define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+#define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+#define SSB_SPROM1_PA1B0		0x006A
+#define SSB_SPROM1_PA1B1		0x006C
+#define SSB_SPROM1_PA1B2		0x006E
+#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+#define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+#define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_ITSSI_A_SHIFT	8
+#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+#define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+#define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_AGAIN_A_SHIFT	8
+
+/* SPROM Revision 2 (inherits from rev 1) */
+#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+#define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+#define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+#define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+#define  SSB_SPROM2_OPO_VALUE		0x00FF
+#define  SSB_SPROM2_OPO_UNUSED		0xFF00
+#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+
+/* SPROM Revision 3 (inherits most data from rev 2) */
+#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+#define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+#define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+#define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+#define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+#define  SSB_SPROM3_CCKPO_55M		0x0F00	/* 5.5M Rate PO */
+#define  SSB_SPROM3_CCKPO_55M_SHIFT	8
+#define  SSB_SPROM3_CCKPO_11M		0xF000	/* 11M Rate PO */
+#define  SSB_SPROM3_CCKPO_11M_SHIFT	12
+#define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+/* SPROM Revision 4 */
+#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI		0x004A	/* Board flags 2 Hi */
+#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+#define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+#define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+#define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+#define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+#define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM4_AGAIN0_SHIFT	0
+#define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM4_AGAIN1_SHIFT	8
+#define SSB_SPROM4_AGAIN23		0x0060
+#define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM4_AGAIN2_SHIFT	0
+#define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM4_AGAIN3_SHIFT	8
+#define SSB_SPROM4_TXPID2G01		0x0062	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G0		0x00FF
+#define  SSB_SPROM4_TXPID2G0_SHIFT	0
+#define  SSB_SPROM4_TXPID2G1		0xFF00
+#define  SSB_SPROM4_TXPID2G1_SHIFT	8
+#define SSB_SPROM4_TXPID2G23		0x0064	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G2		0x00FF
+#define  SSB_SPROM4_TXPID2G2_SHIFT	0
+#define  SSB_SPROM4_TXPID2G3		0xFF00
+#define  SSB_SPROM4_TXPID2G3_SHIFT	8
+#define SSB_SPROM4_TXPID5G01		0x0066	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G0		0x00FF
+#define  SSB_SPROM4_TXPID5G0_SHIFT	0
+#define  SSB_SPROM4_TXPID5G1		0xFF00
+#define  SSB_SPROM4_TXPID5G1_SHIFT	8
+#define SSB_SPROM4_TXPID5G23		0x0068	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G2		0x00FF
+#define  SSB_SPROM4_TXPID5G2_SHIFT	0
+#define  SSB_SPROM4_TXPID5G3		0xFF00
+#define  SSB_SPROM4_TXPID5G3_SHIFT	8
+#define SSB_SPROM4_TXPID5GL01		0x006A	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL0		0x00FF
+#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL1		0xFF00
+#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
+#define SSB_SPROM4_TXPID5GL23		0x006C	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL2		0x00FF
+#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL3		0xFF00
+#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
+#define SSB_SPROM4_TXPID5GH01		0x006E	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH0		0x00FF
+#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH1		0xFF00
+#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
+#define SSB_SPROM4_TXPID5GH23		0x0070	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH2		0x00FF
+#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH3		0xFF00
+#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
+#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+#define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+#define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM4_ITSSI_A_SHIFT	8
+#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
+#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
+#define SSB_SPROM4_PA0B2		0x0086
+#define SSB_SPROM4_PA1B0		0x008E
+#define SSB_SPROM4_PA1B1		0x0090
+#define SSB_SPROM4_PA1B2		0x0092
+
+/* SPROM Revision 5 (inherits most data from rev 4) */
+#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO		0x004E	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI		0x0050	/* Board flags 2 Hi */
+#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+
+/* SPROM Revision 8 */
+#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
+#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
+#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
+#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM8_AGAIN0_SHIFT	0
+#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM8_AGAIN1_SHIFT	8
+#define SSB_SPROM8_AGAIN23		0x00A0
+#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM8_AGAIN2_SHIFT	0
+#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM8_AGAIN3_SHIFT	8
+#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+#define  SSB_SPROM8_RSSISMF2G		0x000F
+#define  SSB_SPROM8_RSSISMC2G		0x00F0
+#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV2G		0x0700
+#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+#define  SSB_SPROM8_BXA2G		0x1800
+#define  SSB_SPROM8_BXA2G_SHIFT		11
+#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+#define  SSB_SPROM8_RSSISMF5G		0x000F
+#define  SSB_SPROM8_RSSISMC5G		0x00F0
+#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV5G		0x0700
+#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+#define  SSB_SPROM8_BXA5G		0x1800
+#define  SSB_SPROM8_BXA5G_SHIFT		11
+#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+#define  SSB_SPROM8_TRI5G_SHIFT		8
+#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+#define  SSB_SPROM8_TRI5GH_SHIFT	8
+#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G_SHIFT	8
+#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1		0x00C4
+#define SSB_SPROM8_PA0B2		0x00C6
+#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM8_ITSSI_A_SHIFT	8
+#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+#define  SSB_SPROM8_MAXP_AL_SHIFT	8
+#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1		0x00CE
+#define SSB_SPROM8_PA1B2		0x00D0
+#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1		0x00D4
+#define SSB_SPROM8_PA1LOB2		0x00D6
+#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1		0x00DA
+#define SSB_SPROM8_PA1HIB2		0x00DC
+#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
+#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
+#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
+#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
+#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */
+#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */
+#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
+#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */
+#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */
+#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */
+#define SSB_BFL_HGPA			0x2000	/* had high gain PA */
+#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
+#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
+
+/* Values for boardflags_hi read from SPROM */
+#define SSB_BFH_NOPA			0x0001	/* has no PA */
+#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */
+#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */
+#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */
+#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */
+#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */
+#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */
+
+/* Values for boardflags2_lo read from SPROM */
+#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
+#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
+#define SSB_BFL2_TXPWRCTRL_EN		0x0004	/* permits enabling TX Power Control */
+#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
+#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
+#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
+#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
+#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
+#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
+#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
+
+/* Values for SSB_SPROM1_BINF_CCODE */
+enum {
+	SSB_SPROM1CCODE_WORLD = 0,
+	SSB_SPROM1CCODE_THAILAND,
+	SSB_SPROM1CCODE_ISRAEL,
+	SSB_SPROM1CCODE_JORDAN,
+	SSB_SPROM1CCODE_CHINA,
+	SSB_SPROM1CCODE_JAPAN,
+	SSB_SPROM1CCODE_USA_CANADA_ANZ,
+	SSB_SPROM1CCODE_EUROPE,
+	SSB_SPROM1CCODE_USA_LOW,
+	SSB_SPROM1CCODE_JAPAN_HIGH,
+	SSB_SPROM1CCODE_ALL,
+	SSB_SPROM1CCODE_NONE,
+};
+
+/* Address-Match values and masks (SSB_ADMATCHxxx) */
+#define SSB_ADM_TYPE			0x00000003	/* Address type */
+#define  SSB_ADM_TYPE0			0
+#define  SSB_ADM_TYPE1			1
+#define  SSB_ADM_TYPE2			2
+#define SSB_ADM_AD64			0x00000004
+#define SSB_ADM_SZ0			0x000000F8	/* Type0 size */
+#define SSB_ADM_SZ0_SHIFT		3
+#define SSB_ADM_SZ1			0x000001F8	/* Type1 size */
+#define SSB_ADM_SZ1_SHIFT		3
+#define SSB_ADM_SZ2			0x000001F8	/* Type2 size */
+#define SSB_ADM_SZ2_SHIFT		3
+#define SSB_ADM_EN			0x00000400	/* Enable */
+#define SSB_ADM_NEG			0x00000800	/* Negative decode */
+#define SSB_ADM_BASE0			0xFFFFFF00	/* Type0 base address */
+#define SSB_ADM_BASE0_SHIFT		8
+#define SSB_ADM_BASE1			0xFFFFF000	/* Type1 base address for the core */
+#define SSB_ADM_BASE1_SHIFT		12
+#define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
+#define SSB_ADM_BASE2_SHIFT		16
+
+
+#endif /* LINUX_SSB_REGS_H_ */
diff --git a/include/compat/linux/tracepoint.h b/include/compat/linux/tracepoint.h
new file mode 100755
index 0000000..9f5add1
--- /dev/null
+++ b/include/compat/linux/tracepoint.h
@@ -0,0 +1,10 @@
+#ifndef _COMPAT_LINUX_TRACEPOINT_H
+#define _COMPAT_LINUX_TRACEPOINT_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27))
+#include_next <linux/tracepoint.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)) */
+
+#endif	/* _COMPAT_LINUX_TRACEPOINT_H */
diff --git a/include/compat/linux/unaligned/access_ok.h b/include/compat/linux/unaligned/access_ok.h
new file mode 100755
index 0000000..99c1b4d
--- /dev/null
+++ b/include/compat/linux/unaligned/access_ok.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_UNALIGNED_ACCESS_OK_H
+#define _LINUX_UNALIGNED_ACCESS_OK_H
+
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return le16_to_cpup((__le16 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return le32_to_cpup((__le32 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return le64_to_cpup((__le64 *)p);
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return be16_to_cpup((__be16 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return be32_to_cpup((__be32 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return be64_to_cpup((__be64 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	*((__le16 *)p) = cpu_to_le16(val);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	*((__le32 *)p) = cpu_to_le32(val);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	*((__le64 *)p) = cpu_to_le64(val);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	*((__be16 *)p) = cpu_to_be16(val);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	*((__be32 *)p) = cpu_to_be32(val);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	*((__be64 *)p) = cpu_to_be64(val);
+}
+
+#endif /* _LINUX_UNALIGNED_ACCESS_OK_H */
diff --git a/include/compat/linux/unaligned/be_byteshift.h b/include/compat/linux/unaligned/be_byteshift.h
new file mode 100755
index 0000000..9356b24
--- /dev/null
+++ b/include/compat/linux/unaligned/be_byteshift.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_be16(const u8 *p)
+{
+	return p[0] << 8 | p[1];
+}
+
+static inline u32 __get_unaligned_be32(const u8 *p)
+{
+	return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
+}
+
+static inline u64 __get_unaligned_be64(const u8 *p)
+{
+	return (u64)__get_unaligned_be32(p) << 32 |
+	       __get_unaligned_be32(p + 4);
+}
+
+static inline void __put_unaligned_be16(u16 val, u8 *p)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void __put_unaligned_be32(u32 val, u8 *p)
+{
+	__put_unaligned_be16(val >> 16, p);
+	__put_unaligned_be16(val, p + 2);
+}
+
+static inline void __put_unaligned_be64(u64 val, u8 *p)
+{
+	__put_unaligned_be32(val >> 32, p);
+	__put_unaligned_be32(val, p + 4);
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_be16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_be32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_be64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_be16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_be32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_be64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_BE_BYTESHIFT_H */
diff --git a/include/compat/linux/unaligned/be_memmove.h b/include/compat/linux/unaligned/be_memmove.h
new file mode 100755
index 0000000..c2a76c5
--- /dev/null
+++ b/include/compat/linux/unaligned/be_memmove.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_BE_MEMMOVE_H
+#define _LINUX_UNALIGNED_BE_MEMMOVE_H
+
+#include <linux/unaligned/memmove.h>
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_memmove16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_memmove32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_memmove64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_memmove16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_memmove32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_memmove64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/include/compat/linux/unaligned/be_struct.h b/include/compat/linux/unaligned/be_struct.h
new file mode 100755
index 0000000..1324158
--- /dev/null
+++ b/include/compat/linux/unaligned/be_struct.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_BE_STRUCT_H
+#define _LINUX_UNALIGNED_BE_STRUCT_H
+
+#include <linux/unaligned/packed_struct.h>
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_cpu16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_cpu32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_cpu64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_cpu16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_cpu32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_cpu64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_BE_STRUCT_H */
diff --git a/include/compat/linux/unaligned/generic.h b/include/compat/linux/unaligned/generic.h
new file mode 100755
index 0000000..02d97ff
--- /dev/null
+++ b/include/compat/linux/unaligned/generic.h
@@ -0,0 +1,68 @@
+#ifndef _LINUX_UNALIGNED_GENERIC_H
+#define _LINUX_UNALIGNED_GENERIC_H
+
+/*
+ * Cause a link-time error if we try an unaligned access other than
+ * 1,2,4 or 8 bytes long
+ */
+extern void __bad_unaligned_access_size(void);
+
+#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __put_unaligned_le(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_le16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_le32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_le64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#define __put_unaligned_be(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_be16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_be32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_be64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#endif /* _LINUX_UNALIGNED_GENERIC_H */
diff --git a/include/compat/linux/unaligned/le_byteshift.h b/include/compat/linux/unaligned/le_byteshift.h
new file mode 100755
index 0000000..be376fb
--- /dev/null
+++ b/include/compat/linux/unaligned/le_byteshift.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_le16(const u8 *p)
+{
+	return p[0] | p[1] << 8;
+}
+
+static inline u32 __get_unaligned_le32(const u8 *p)
+{
+	return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
+}
+
+static inline u64 __get_unaligned_le64(const u8 *p)
+{
+	return (u64)__get_unaligned_le32(p + 4) << 32 |
+	       __get_unaligned_le32(p);
+}
+
+static inline void __put_unaligned_le16(u16 val, u8 *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void __put_unaligned_le32(u32 val, u8 *p)
+{
+	__put_unaligned_le16(val >> 16, p + 2);
+	__put_unaligned_le16(val, p);
+}
+
+static inline void __put_unaligned_le64(u64 val, u8 *p)
+{
+	__put_unaligned_le32(val >> 32, p + 4);
+	__put_unaligned_le32(val, p);
+}
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_le16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_le32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_le64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_le16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_le32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_le64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_BYTESHIFT_H */
diff --git a/include/compat/linux/unaligned/le_memmove.h b/include/compat/linux/unaligned/le_memmove.h
new file mode 100755
index 0000000..269849b
--- /dev/null
+++ b/include/compat/linux/unaligned/le_memmove.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_LE_MEMMOVE_H
+#define _LINUX_UNALIGNED_LE_MEMMOVE_H
+
+#include <linux/unaligned/memmove.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_memmove16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_memmove32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_memmove64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_memmove16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_memmove32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_memmove64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/include/compat/linux/unaligned/le_struct.h b/include/compat/linux/unaligned/le_struct.h
new file mode 100755
index 0000000..088c457
--- /dev/null
+++ b/include/compat/linux/unaligned/le_struct.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_LE_STRUCT_H
+#define _LINUX_UNALIGNED_LE_STRUCT_H
+
+#include <linux/unaligned/packed_struct.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_cpu16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_cpu32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_cpu64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_cpu16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_cpu32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_cpu64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_STRUCT_H */
diff --git a/include/compat/linux/unaligned/memmove.h b/include/compat/linux/unaligned/memmove.h
new file mode 100755
index 0000000..eeb5a77
--- /dev/null
+++ b/include/compat/linux/unaligned/memmove.h
@@ -0,0 +1,45 @@
+#ifndef _LINUX_UNALIGNED_MEMMOVE_H
+#define _LINUX_UNALIGNED_MEMMOVE_H
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+
+static inline u16 __get_unaligned_memmove16(const void *p)
+{
+	u16 tmp;
+	memmove(&tmp, p, 2);
+	return tmp;
+}
+
+static inline u32 __get_unaligned_memmove32(const void *p)
+{
+	u32 tmp;
+	memmove(&tmp, p, 4);
+	return tmp;
+}
+
+static inline u64 __get_unaligned_memmove64(const void *p)
+{
+	u64 tmp;
+	memmove(&tmp, p, 8);
+	return tmp;
+}
+
+static inline void __put_unaligned_memmove16(u16 val, void *p)
+{
+	memmove(p, &val, 2);
+}
+
+static inline void __put_unaligned_memmove32(u32 val, void *p)
+{
+	memmove(p, &val, 4);
+}
+
+static inline void __put_unaligned_memmove64(u64 val, void *p)
+{
+	memmove(p, &val, 8);
+}
+
+#endif /* _LINUX_UNALIGNED_MEMMOVE_H */
diff --git a/include/compat/linux/unaligned/packed_struct.h b/include/compat/linux/unaligned/packed_struct.h
new file mode 100755
index 0000000..2498bb9
--- /dev/null
+++ b/include/compat/linux/unaligned/packed_struct.h
@@ -0,0 +1,46 @@
+#ifndef _LINUX_UNALIGNED_PACKED_STRUCT_H
+#define _LINUX_UNALIGNED_PACKED_STRUCT_H
+
+#include <linux/kernel.h>
+
+struct __una_u16 { u16 x __attribute__((packed)); };
+struct __una_u32 { u32 x __attribute__((packed)); };
+struct __una_u64 { u64 x __attribute__((packed)); };
+
+static inline u16 __get_unaligned_cpu16(const void *p)
+{
+	const struct __una_u16 *ptr = (const struct __una_u16 *)p;
+	return ptr->x;
+}
+
+static inline u32 __get_unaligned_cpu32(const void *p)
+{
+	const struct __una_u32 *ptr = (const struct __una_u32 *)p;
+	return ptr->x;
+}
+
+static inline u64 __get_unaligned_cpu64(const void *p)
+{
+	const struct __una_u64 *ptr = (const struct __una_u64 *)p;
+	return ptr->x;
+}
+
+static inline void __put_unaligned_cpu16(u16 val, void *p)
+{
+	struct __una_u16 *ptr = (struct __una_u16 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu32(u32 val, void *p)
+{
+	struct __una_u32 *ptr = (struct __una_u32 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu64(u64 val, void *p)
+{
+	struct __una_u64 *ptr = (struct __una_u64 *)p;
+	ptr->x = val;
+}
+
+#endif /* _LINUX_UNALIGNED_PACKED_STRUCT_H */
diff --git a/include/compat/linux/usb/rndis_host.h b/include/compat/linux/usb/rndis_host.h
new file mode 100755
index 0000000..88fceb7
--- /dev/null
+++ b/include/compat/linux/usb/rndis_host.h
@@ -0,0 +1,272 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef	__LINUX_USB_RNDIS_HOST_H
+#define	__LINUX_USB_RNDIS_HOST_H
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ *  - control-out:  SEND_ENCAPSULATED
+ *  - interrupt-in:  RESPONSE_AVAILABLE
+ *  - control-in:  GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
+ */
+struct rndis_msg_hdr {
+	__le32	msg_type;			/* RNDIS_MSG_* */
+	__le32	msg_len;
+	/* followed by data that varies between messages */
+	__le32	request_id;
+	__le32	status;
+	/* ... and more */
+} __attribute__ ((packed));
+
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define	CONTROL_BUFFER_SIZE		1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)
+
+#define RNDIS_MSG_COMPLETION	cpu_to_le32(0x80000000)
+
+/* codes for "msg_type" field of rndis messages;
+ * only the data channel uses packet messages (maybe batched);
+ * everything else goes on the control channel.
+ */
+#define RNDIS_MSG_PACKET	cpu_to_le32(0x00000001)	/* 1-N packets */
+#define RNDIS_MSG_INIT		cpu_to_le32(0x00000002)
+#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_HALT		cpu_to_le32(0x00000003)
+#define RNDIS_MSG_QUERY		cpu_to_le32(0x00000004)
+#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET		cpu_to_le32(0x00000005)
+#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET		cpu_to_le32(0x00000006)
+#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INDICATE	cpu_to_le32(0x00000007)
+#define RNDIS_MSG_KEEPALIVE	cpu_to_le32(0x00000008)
+#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+
+/* codes for "status" field of completion messages */
+#define	RNDIS_STATUS_SUCCESS			cpu_to_le32(0x00000000)
+#define	RNDIS_STATUS_FAILURE			cpu_to_le32(0xc0000001)
+#define	RNDIS_STATUS_INVALID_DATA		cpu_to_le32(0xc0010015)
+#define	RNDIS_STATUS_NOT_SUPPORTED		cpu_to_le32(0xc00000bb)
+#define	RNDIS_STATUS_MEDIA_CONNECT		cpu_to_le32(0x4001000b)
+#define	RNDIS_STATUS_MEDIA_DISCONNECT		cpu_to_le32(0x4001000c)
+#define	RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION	cpu_to_le32(0x40010012)
+
+/* codes for OID_GEN_PHYSICAL_MEDIUM */
+#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	cpu_to_le32(0x00000000)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	cpu_to_le32(0x00000001)
+#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	cpu_to_le32(0x00000002)
+#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	cpu_to_le32(0x00000003)
+#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	cpu_to_le32(0x00000004)
+#define	RNDIS_PHYSICAL_MEDIUM_DSL		cpu_to_le32(0x00000005)
+#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	cpu_to_le32(0x00000006)
+#define	RNDIS_PHYSICAL_MEDIUM_1394		cpu_to_le32(0x00000007)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	cpu_to_le32(0x00000008)
+#define	RNDIS_PHYSICAL_MEDIUM_MAX		cpu_to_le32(0x00000009)
+
+struct rndis_data_hdr {
+	__le32	msg_type;		/* RNDIS_MSG_PACKET */
+	__le32	msg_len;		/* rndis_data_hdr + data_len + pad */
+	__le32	data_offset;		/* 36 -- right after header */
+	__le32	data_len;		/* ... real packet size */
+
+	__le32	oob_data_offset;	/* zero */
+	__le32	oob_data_len;		/* zero */
+	__le32	num_oob;		/* zero */
+	__le32	packet_data_offset;	/* zero */
+
+	__le32	packet_data_len;	/* zero */
+	__le32	vc_handle;		/* zero */
+	__le32	reserved;		/* zero */
+} __attribute__ ((packed));
+
+struct rndis_init {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INIT */
+	__le32	msg_len;			/* 24 */
+	__le32	request_id;
+	__le32	major_version;			/* of rndis (1.0) */
+	__le32	minor_version;
+	__le32	max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INIT_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+	__le32	major_version;			/* of rndis (1.0) */
+	__le32	minor_version;
+	__le32	device_flags;
+	__le32	medium;				/* zero == 802.3 */
+	__le32	max_packets_per_message;
+	__le32	max_transfer_size;
+	__le32	packet_alignment;		/* max 7; (1<<n) bytes */
+	__le32	af_list_offset;			/* zero */
+	__le32	af_list_size;			/* zero */
+} __attribute__ ((packed));
+
+struct rndis_halt {		/* OUT (no reply) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_HALT */
+	__le32	msg_len;
+	__le32	request_id;
+} __attribute__ ((packed));
+
+struct rndis_query {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_QUERY */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	oid;
+	__le32	len;
+	__le32	offset;
+/*?*/	__le32	handle;				/* zero */
+} __attribute__ ((packed));
+
+struct rndis_query_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_QUERY_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+	__le32	len;
+	__le32	offset;
+} __attribute__ ((packed));
+
+struct rndis_set {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_SET */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	oid;
+	__le32	len;
+	__le32	offset;
+/*?*/	__le32	handle;				/* zero */
+} __attribute__ ((packed));
+
+struct rndis_set_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_SET_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+} __attribute__ ((packed));
+
+struct rndis_reset {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_RESET */
+	__le32	msg_len;
+	__le32	reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_RESET_C */
+	__le32	msg_len;
+	__le32	status;
+	__le32	addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate {		/* IN (unrequested) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INDICATE */
+	__le32	msg_len;
+	__le32	status;
+	__le32	length;
+	__le32	offset;
+/**/	__le32	diag_status;
+	__le32	error_offset;
+/**/	__le32	message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive {	/* OUT (optionally IN) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE */
+	__le32	msg_len;
+	__le32	request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c {	/* IN (optionally OUT) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+} __attribute__ ((packed));
+
+/* NOTE:  about 30 OIDs are "mandatory" for peripherals to support ... and
+ * there are gobs more that may optionally be supported.  We'll avoid as much
+ * of that mess as possible.
+ */
+#define OID_802_3_PERMANENT_ADDRESS	cpu_to_le32(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE	cpu_to_le32(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER	cpu_to_le32(0x0001010e)
+#define OID_GEN_PHYSICAL_MEDIUM		cpu_to_le32(0x00010202)
+
+/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
+#define RNDIS_PACKET_TYPE_DIRECTED		cpu_to_le32(0x00000001)
+#define RNDIS_PACKET_TYPE_MULTICAST		cpu_to_le32(0x00000002)
+#define RNDIS_PACKET_TYPE_ALL_MULTICAST		cpu_to_le32(0x00000004)
+#define RNDIS_PACKET_TYPE_BROADCAST		cpu_to_le32(0x00000008)
+#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	cpu_to_le32(0x00000010)
+#define RNDIS_PACKET_TYPE_PROMISCUOUS		cpu_to_le32(0x00000020)
+#define RNDIS_PACKET_TYPE_SMT			cpu_to_le32(0x00000040)
+#define RNDIS_PACKET_TYPE_ALL_LOCAL		cpu_to_le32(0x00000080)
+#define RNDIS_PACKET_TYPE_GROUP			cpu_to_le32(0x00001000)
+#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	cpu_to_le32(0x00002000)
+#define RNDIS_PACKET_TYPE_FUNCTIONAL		cpu_to_le32(0x00004000)
+#define RNDIS_PACKET_TYPE_MAC_FRAME		cpu_to_le32(0x00008000)
+
+/* default filter used with RNDIS devices */
+#define RNDIS_DEFAULT_FILTER ( \
+	RNDIS_PACKET_TYPE_DIRECTED | \
+	RNDIS_PACKET_TYPE_BROADCAST | \
+	RNDIS_PACKET_TYPE_ALL_MULTICAST | \
+	RNDIS_PACKET_TYPE_PROMISCUOUS)
+
+/* Flags to require specific physical medium type for generic_rndis_bind() */
+#define FLAG_RNDIS_PHYM_NOT_WIRELESS	0x0001
+#define FLAG_RNDIS_PHYM_WIRELESS	0x0002
+
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
+
+extern void rndis_status(struct usbnet *dev, struct urb *urb);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
+extern int
+generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
+extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
+extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
+extern struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
+
+#endif	/* __LINUX_USB_RNDIS_HOST_H */
diff --git a/include/compat/linux/usb/usbnet.h b/include/compat/linux/usb/usbnet.h
new file mode 100755
index 0000000..605b0aa
--- /dev/null
+++ b/include/compat/linux/usb/usbnet.h
@@ -0,0 +1,231 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef	__LINUX_USB_USBNET_H
+#define	__LINUX_USB_USBNET_H
+
+/* interface from usbnet core to each USB networking link we handle */
+struct usbnet {
+	/* housekeeping */
+	struct usb_device	*udev;
+	struct usb_interface	*intf;
+	struct driver_info	*driver_info;
+	const char		*driver_name;
+	void			*driver_priv;
+	wait_queue_head_t	*wait;
+	struct mutex		phy_mutex;
+	unsigned char		suspend_count;
+
+	/* i/o info: pipes etc */
+	unsigned		in, out;
+	struct usb_host_endpoint *status;
+	unsigned		maxpacket;
+	struct timer_list	delay;
+
+	/* protocol/interface state */
+	struct net_device	*net;
+	int			msg_enable;
+	unsigned long		data[5];
+	u32			xid;
+	u32			hard_mtu;	/* count any extra framing */
+	size_t			rx_urb_size;	/* size for rx urbs */
+	struct mii_if_info	mii;
+
+	/* various kinds of pending driver work */
+	struct sk_buff_head	rxq;
+	struct sk_buff_head	txq;
+	struct sk_buff_head	done;
+	struct sk_buff_head	rxq_pause;
+	struct urb		*interrupt;
+	struct usb_anchor	deferred;
+	struct tasklet_struct	bh;
+
+	struct work_struct	kevent;
+	unsigned long		flags;
+#		define EVENT_TX_HALT	0
+#		define EVENT_RX_HALT	1
+#		define EVENT_RX_MEMORY	2
+#		define EVENT_STS_SPLIT	3
+#		define EVENT_LINK_RESET	4
+#		define EVENT_RX_PAUSED	5
+#		define EVENT_DEV_WAKING 6
+#		define EVENT_DEV_ASLEEP 7
+#		define EVENT_DEV_OPEN	8
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+	return to_usb_driver(intf->dev.driver);
+}
+
+/* interface from the device/framing level "minidriver" to core */
+struct driver_info {
+	char		*description;
+
+	int		flags;
+/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
+#define FLAG_FRAMING_NC	0x0001		/* guard against device dropouts */
+#define FLAG_FRAMING_GL	0x0002		/* genelink batches packets */
+#define FLAG_FRAMING_Z	0x0004		/* zaurus adds a trailer */
+#define FLAG_FRAMING_RN	0x0008		/* RNDIS batches, plus huge header */
+
+#define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
+#define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
+
+#define FLAG_FRAMING_AX 0x0040		/* AX88772/178 packets */
+#define FLAG_WLAN	0x0080		/* use "wlan%d" names */
+#define FLAG_AVOID_UNLINK_URBS 0x0100	/* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP	0x0200		/* hw requires ZLPs are sent */
+#define FLAG_WWAN	0x0400		/* use "wwan%d" names */
+
+#define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
+
+#define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */
+
+/*
+ * Indicates to usbnet, that USB driver accumulates multiple IP packets.
+ * Affects statistic (counters) and short packet handling.
+ */
+#define FLAG_MULTI_PACKET	0x2000
+#define FLAG_RX_ASSEMBLE	0x4000	/* rx packets may span >1 frames */
+
+	/* init device ... can sleep, or cause probe() failure */
+	int	(*bind)(struct usbnet *, struct usb_interface *);
+
+	/* cleanup device ... can sleep, but can't fail */
+	void	(*unbind)(struct usbnet *, struct usb_interface *);
+
+	/* reset device ... can sleep */
+	int	(*reset)(struct usbnet *);
+
+	/* stop device ... can sleep */
+	int	(*stop)(struct usbnet *);
+
+	/* see if peer is connected ... can sleep */
+	int	(*check_connect)(struct usbnet *);
+
+	/* (dis)activate runtime power management */
+	int	(*manage_power)(struct usbnet *, int);
+
+	/* for status polling */
+	void	(*status)(struct usbnet *, struct urb *);
+
+	/* link reset handling, called from defer_kevent */
+	int	(*link_reset)(struct usbnet *);
+
+	/* fixup rx packet (strip framing) */
+	int	(*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+	/* fixup tx packet (add framing) */
+	struct sk_buff	*(*tx_fixup)(struct usbnet *dev,
+				struct sk_buff *skb, gfp_t flags);
+
+	/* early initialization code, can sleep. This is for minidrivers
+	 * having 'subminidrivers' that need to do extra initialization
+	 * right after minidriver have initialized hardware. */
+	int	(*early_init)(struct usbnet *dev);
+
+	/* called by minidriver when receiving indication */
+	void	(*indication)(struct usbnet *dev, void *ind, int indlen);
+
+	/* for new devices, use the descriptor-reading code instead */
+	int		in;		/* rx endpoint */
+	int		out;		/* tx endpoint */
+
+	unsigned long	data;		/* Misc driver specific data */
+};
+
+/* Minidrivers are just drivers using the "usbnet" core as a powerful
+ * network-specific subroutine library ... that happens to do pretty
+ * much everything except custom framing and chip-specific stuff.
+ */
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend(struct usb_interface *, pm_message_t);
+extern int usbnet_resume(struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+
+
+/* Drivers that reuse some of the standard USB CDC infrastructure
+ * (notably, using multiple interfaces according to the CDC
+ * union descriptor) get some helper code.
+ */
+struct cdc_state {
+	struct usb_cdc_header_desc	*header;
+	struct usb_cdc_union_desc	*u;
+	struct usb_cdc_ether_desc	*ether;
+	struct usb_interface		*control;
+	struct usb_interface		*data;
+};
+
+extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_status(struct usbnet *, struct urb *);
+
+/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
+#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
+			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
+			|USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* we record the state for each of our queued skbs */
+enum skb_state {
+	illegal = 0,
+	tx_start, tx_done,
+	rx_start, rx_done, rx_cleanup
+};
+
+struct skb_data {	/* skb->cb is one of these */
+	struct urb		*urb;
+	struct usbnet		*dev;
+	enum skb_state		state;
+	size_t			length;
+};
+
+extern int usbnet_open(struct net_device *net);
+extern int usbnet_stop(struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
+				     struct net_device *net);
+extern void usbnet_tx_timeout(struct net_device *net);
+extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
+extern void usbnet_defer_kevent(struct usbnet *, int);
+extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
+
+extern void usbnet_pause_rx(struct usbnet *);
+extern void usbnet_resume_rx(struct usbnet *);
+extern void usbnet_purge_paused_rxq(struct usbnet *);
+
+extern int usbnet_get_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern int usbnet_set_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link(struct net_device *net);
+extern u32 usbnet_get_msglevel(struct net_device *);
+extern void usbnet_set_msglevel(struct net_device *, u32);
+extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
+
+#endif /* __LINUX_USB_USBNET_H */
diff --git a/include/compat/linux/version.h b/include/compat/linux/version.h
new file mode 100755
index 0000000..527f360
--- /dev/null
+++ b/include/compat/linux/version.h
@@ -0,0 +1,2 @@
+#define LINUX_VERSION_CODE 196623
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
diff --git a/include/compat/linux/wakelock.h b/include/compat/linux/wakelock.h
new file mode 100755
index 0000000..a9407fe
--- /dev/null
+++ b/include/compat/linux/wakelock.h
@@ -0,0 +1,90 @@
+/* include/linux/wakelock.h
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_WAKELOCK_H
+#define _LINUX_WAKELOCK_H
+
+#include <linux/list.h>
+#include <linux/ktime.h>
+
+/* A wake_lock prevents the system from entering suspend or other low power
+ * states when active. If the type is set to WAKE_LOCK_SUSPEND, the wake_lock
+ * prevents a full system suspend. If the type is WAKE_LOCK_IDLE, low power
+ * states that cause large interrupt latencies or that disable a set of
+ * interrupts will not entered from idle until the wake_locks are released.
+ */
+
+enum {
+	WAKE_LOCK_SUSPEND, /* Prevent suspend */
+	WAKE_LOCK_IDLE,    /* Prevent low power idle */
+	WAKE_LOCK_TYPE_COUNT
+};
+
+struct wake_lock {
+#ifdef CONFIG_HAS_WAKELOCK
+	struct list_head    link;
+	int                 flags;
+	const char         *name;
+	unsigned long       expires;
+#ifdef CONFIG_WAKELOCK_STAT
+	struct {
+		int             count;
+		int             expire_count;
+		int             wakeup_count;
+		ktime_t         total_time;
+		ktime_t         prevent_suspend_time;
+		ktime_t         max_time;
+		ktime_t         last_time;
+	} stat;
+#endif
+#endif
+};
+
+#ifdef CONFIG_HAS_WAKELOCK
+
+void wake_lock_init(struct wake_lock *lock, int type, const char *name);
+void wake_lock_destroy(struct wake_lock *lock);
+void wake_lock(struct wake_lock *lock);
+void wake_lock_timeout(struct wake_lock *lock, long timeout);
+void wake_unlock(struct wake_lock *lock);
+
+/* wake_lock_active returns a non-zero value if the wake_lock is currently
+ * locked. If the wake_lock has a timeout, it does not check the timeout
+ * but if the timeout had aready been checked it will return 0.
+ */
+int wake_lock_active(struct wake_lock *lock);
+
+/* has_wake_lock returns 0 if no wake locks of the specified type are active,
+ * and non-zero if one or more wake locks are held. Specifically it returns
+ * -1 if one or more wake locks with no timeout are active or the
+ * number of jiffies until all active wake locks time out.
+ */
+long has_wake_lock(int type);
+
+#else
+
+static inline void wake_lock_init(struct wake_lock *lock, int type,
+					const char *name) {}
+static inline void wake_lock_destroy(struct wake_lock *lock) {}
+static inline void wake_lock(struct wake_lock *lock) {}
+static inline void wake_lock_timeout(struct wake_lock *lock, long timeout) {}
+static inline void wake_unlock(struct wake_lock *lock) {}
+
+static inline int wake_lock_active(struct wake_lock *lock) { return 0; }
+static inline long has_wake_lock(int type) { return 0; }
+
+#endif
+
+#endif
diff --git a/include/compat/linux/wireless.h b/include/compat/linux/wireless.h
new file mode 100755
index 0000000..ef886ac
--- /dev/null
+++ b/include/compat/linux/wireless.h
@@ -0,0 +1,1162 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+#include <linux/compat.h>
+
+struct compat_iw_point {
+	compat_caddr_t pointer;
+	__u16 length;
+	__u16 flags;
+};
+#endif
+#endif
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa;	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+struct __compat_iw_event {
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	compat_caddr_t	pointer;
+};
+#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
+#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
+
+/* Size of the various events for compat */
+#define IW_EV_COMPAT_CHAR_LEN	(IW_EV_COMPAT_LCP_LEN + IFNAMSIZ)
+#define IW_EV_COMPAT_UINT_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(__u32))
+#define IW_EV_COMPAT_FREQ_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_COMPAT_PARAM_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_COMPAT_ADDR_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_COMPAT_QUAL_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality))
+#define IW_EV_COMPAT_POINT_LEN	\
+	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
+	 IW_EV_COMPAT_POINT_OFF)
+#endif
+#endif
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif	/* _LINUX_WIRELESS_H */
diff --git a/include/compat/linux/wl12xx.h b/include/compat/linux/wl12xx.h
new file mode 100755
index 0000000..4b69739
--- /dev/null
+++ b/include/compat/linux/wl12xx.h
@@ -0,0 +1,78 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_WL12XX_H
+#define _LINUX_WL12XX_H
+
+/* Reference clock values */
+enum {
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
+};
+
+struct wl12xx_platform_data {
+	void (*set_power)(bool enable);
+	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+	int irq;
+	bool use_eeprom;
+	int board_ref_clock;
+	int board_tcxo_clock;
+	unsigned long platform_quirks;
+};
+
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
+
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+
+int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
+
+#else
+
+static inline
+int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+const struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+
+#endif
diff --git a/include/compat/net/bluetooth/bluetooth.h b/include/compat/net/bluetooth/bluetooth.h
new file mode 100755
index 0000000..f045a32
--- /dev/null
+++ b/include/compat/net/bluetooth/bluetooth.h
@@ -0,0 +1,276 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __BLUETOOTH_H
+#define __BLUETOOTH_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <net/sock.h>
+
+#ifndef AF_BLUETOOTH
+#define AF_BLUETOOTH	31
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#endif
+
+/* Reserv for core and drivers use */
+#define BT_SKB_RESERVE	8
+
+#define BTPROTO_L2CAP	0
+#define BTPROTO_HCI	1
+#define BTPROTO_SCO	2
+#define BTPROTO_RFCOMM	3
+#define BTPROTO_BNEP	4
+#define BTPROTO_CMTP	5
+#define BTPROTO_HIDP	6
+#define BTPROTO_AVDTP	7
+
+#define SOL_HCI		0
+#define SOL_L2CAP	6
+#define SOL_SCO		17
+#define SOL_RFCOMM	18
+
+#define BT_SECURITY	4
+struct bt_security {
+	__u8 level;
+	__u8 key_size;
+};
+#define BT_SECURITY_SDP		0
+#define BT_SECURITY_LOW		1
+#define BT_SECURITY_MEDIUM	2
+#define BT_SECURITY_HIGH	3
+
+#define BT_DEFER_SETUP	7
+
+#define BT_FLUSHABLE	8
+
+#define BT_FLUSHABLE_OFF	0
+#define BT_FLUSHABLE_ON		1
+
+#define BT_POWER	9
+struct bt_power {
+	__u8 force_active;
+};
+#define BT_POWER_FORCE_ACTIVE_OFF 0
+#define BT_POWER_FORCE_ACTIVE_ON  1
+
+#define BT_CHANNEL_POLICY	10
+
+/* BR/EDR only (default policy)
+ *   AMP controllers cannot be used.
+ *   Channel move requests from the remote device are denied.
+ *   If the L2CAP channel is currently using AMP, move the channel to BR/EDR.
+ */
+#define BT_CHANNEL_POLICY_BREDR_ONLY		0
+
+/* BR/EDR Preferred
+ *   Allow use of AMP controllers.
+ *   If the L2CAP channel is currently on AMP, move it to BR/EDR.
+ *   Channel move requests from the remote device are allowed.
+ */
+#define BT_CHANNEL_POLICY_BREDR_PREFERRED	1
+
+/* AMP Preferred
+ *   Allow use of AMP controllers
+ *   If the L2CAP channel is currently on BR/EDR and AMP controller
+ *     resources are available, initiate a channel move to AMP.
+ *   Channel move requests from the remote device are allowed.
+ *   If the L2CAP socket has not been connected yet, try to create
+ *     and configure the channel directly on an AMP controller rather
+ *     than BR/EDR.
+ */
+#define BT_CHANNEL_POLICY_AMP_PREFERRED		2
+
+__printf(2, 3)
+int bt_printk(const char *level, const char *fmt, ...);
+
+#define BT_INFO(fmt, arg...)   bt_printk(KERN_INFO, pr_fmt(fmt), ##arg)
+#define BT_ERR(fmt, arg...)    bt_printk(KERN_ERR, pr_fmt(fmt), ##arg)
+#define BT_DBG(fmt, arg...)    pr_debug(fmt "\n", ##arg)
+
+/* Connection and socket states */
+enum {
+	BT_CONNECTED = 1, /* Equal to TCP_ESTABLISHED to make net code happy */
+	BT_OPEN,
+	BT_BOUND,
+	BT_LISTEN,
+	BT_CONNECT,
+	BT_CONNECT2,
+	BT_CONFIG,
+	BT_DISCONN,
+	BT_CLOSED
+};
+
+/* BD Address */
+typedef struct {
+	__u8 b[6];
+} __packed bdaddr_t;
+
+#define BDADDR_ANY   (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}})
+#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff}})
+
+/* Copy, swap, convert BD Address */
+static inline int bacmp(bdaddr_t *ba1, bdaddr_t *ba2)
+{
+	return memcmp(ba1, ba2, sizeof(bdaddr_t));
+}
+static inline void bacpy(bdaddr_t *dst, bdaddr_t *src)
+{
+	memcpy(dst, src, sizeof(bdaddr_t));
+}
+
+void baswap(bdaddr_t *dst, bdaddr_t *src);
+char *batostr(bdaddr_t *ba);
+bdaddr_t *strtoba(char *str);
+
+/* Common socket structures and functions */
+
+#define bt_sk(__sk) ((struct bt_sock *) __sk)
+
+struct bt_sock {
+	struct sock sk;
+	bdaddr_t    src;
+	bdaddr_t    dst;
+	struct list_head accept_q;
+	struct sock *parent;
+	u32 defer_setup;
+};
+
+struct bt_sock_list {
+	struct hlist_head head;
+	rwlock_t          lock;
+};
+
+int  bt_sock_register(int proto, const struct net_proto_family *ops);
+int  bt_sock_unregister(int proto);
+void bt_sock_link(struct bt_sock_list *l, struct sock *s);
+void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
+int  bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+				struct msghdr *msg, size_t len, int flags);
+int  bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
+			struct msghdr *msg, size_t len, int flags);
+uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
+int  bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+int  bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
+
+void bt_accept_enqueue(struct sock *parent, struct sock *sk);
+void bt_accept_unlink(struct sock *sk);
+struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
+
+/* Skb helpers */
+struct bt_skb_cb {
+	__u8 pkt_type;
+	__u8 incoming;
+	__u16 expect;
+	__u16 tx_seq;
+	__u8 retries;
+	__u8 sar;
+	unsigned short channel;
+	__u8 force_active;
+};
+#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
+
+static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how)
+{
+	struct sk_buff *skb;
+
+	if ((skb = alloc_skb(len + BT_SKB_RESERVE, how))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+	return skb;
+}
+
+static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk,
+					unsigned long len, int nb, int *err)
+{
+	struct sk_buff *skb;
+
+	release_sock(sk);
+	if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+	lock_sock(sk);
+
+	if (!skb && *err)
+		return NULL;
+
+	*err = sock_error(sk);
+	if (*err)
+		goto out;
+
+	if (sk->sk_shutdown) {
+		*err = -ECONNRESET;
+		goto out;
+	}
+
+	return skb;
+
+out:
+	kfree_skb(skb);
+	return NULL;
+}
+
+int bt_to_errno(__u16 code);
+
+extern int hci_sock_init(void);
+extern void hci_sock_cleanup(void);
+
+extern int bt_sysfs_init(void);
+extern void bt_sysfs_cleanup(void);
+
+extern struct dentry *bt_debugfs;
+
+#ifdef CONFIG_COMPAT_BT_L2CAP
+int l2cap_init(void);
+void l2cap_exit(void);
+#else
+static inline int l2cap_init(void)
+{
+	return 0;
+}
+
+static inline void l2cap_exit(void)
+{
+}
+#endif
+
+#ifdef CONFIG_COMPAT_BT_SCO
+int sco_init(void);
+void sco_exit(void);
+#else
+static inline int sco_init(void)
+{
+	return 0;
+}
+
+static inline void sco_exit(void)
+{
+}
+#endif
+
+#endif /* __BLUETOOTH_H */
diff --git a/include/compat/net/bluetooth/hci.h b/include/compat/net/bluetooth/hci.h
new file mode 100755
index 0000000..139ce2a
--- /dev/null
+++ b/include/compat/net/bluetooth/hci.h
@@ -0,0 +1,1334 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_H
+#define __HCI_H
+
+#define HCI_MAX_ACL_SIZE	1024
+#define HCI_MAX_SCO_SIZE	255
+#define HCI_MAX_EVENT_SIZE	260
+#define HCI_MAX_FRAME_SIZE	(HCI_MAX_ACL_SIZE + 4)
+
+/* HCI dev events */
+#define HCI_DEV_REG			1
+#define HCI_DEV_UNREG			2
+#define HCI_DEV_UP			3
+#define HCI_DEV_DOWN			4
+#define HCI_DEV_SUSPEND			5
+#define HCI_DEV_RESUME			6
+
+/* HCI notify events */
+#define HCI_NOTIFY_CONN_ADD		1
+#define HCI_NOTIFY_CONN_DEL		2
+#define HCI_NOTIFY_VOICE_SETTING	3
+
+/* HCI bus types */
+#define HCI_VIRTUAL	0
+#define HCI_USB		1
+#define HCI_PCCARD	2
+#define HCI_UART	3
+#define HCI_RS232	4
+#define HCI_PCI		5
+#define HCI_SDIO	6
+
+/* HCI controller types */
+#define HCI_BREDR	0x00
+#define HCI_AMP		0x01
+
+/* HCI device quirks */
+enum {
+	HCI_QUIRK_NO_RESET,
+	HCI_QUIRK_RAW_DEVICE,
+	HCI_QUIRK_FIXUP_BUFFER_SIZE
+};
+
+/* HCI device flags */
+enum {
+	HCI_UP,
+	HCI_INIT,
+	HCI_RUNNING,
+
+	HCI_PSCAN,
+	HCI_ISCAN,
+	HCI_AUTH,
+	HCI_ENCRYPT,
+	HCI_INQUIRY,
+
+	HCI_RAW,
+
+	HCI_SETUP,
+	HCI_AUTO_OFF,
+	HCI_MGMT,
+	HCI_PAIRABLE,
+	HCI_SERVICE_CACHE,
+	HCI_LINK_KEYS,
+	HCI_DEBUG_KEYS,
+
+	HCI_RESET,
+};
+
+/* HCI ioctl defines */
+#define HCIDEVUP	_IOW('H', 201, int)
+#define HCIDEVDOWN	_IOW('H', 202, int)
+#define HCIDEVRESET	_IOW('H', 203, int)
+#define HCIDEVRESTAT	_IOW('H', 204, int)
+
+#define HCIGETDEVLIST	_IOR('H', 210, int)
+#define HCIGETDEVINFO	_IOR('H', 211, int)
+#define HCIGETCONNLIST	_IOR('H', 212, int)
+#define HCIGETCONNINFO	_IOR('H', 213, int)
+#define HCIGETAUTHINFO	_IOR('H', 215, int)
+
+#define HCISETRAW	_IOW('H', 220, int)
+#define HCISETSCAN	_IOW('H', 221, int)
+#define HCISETAUTH	_IOW('H', 222, int)
+#define HCISETENCRYPT	_IOW('H', 223, int)
+#define HCISETPTYPE	_IOW('H', 224, int)
+#define HCISETLINKPOL	_IOW('H', 225, int)
+#define HCISETLINKMODE	_IOW('H', 226, int)
+#define HCISETACLMTU	_IOW('H', 227, int)
+#define HCISETSCOMTU	_IOW('H', 228, int)
+
+#define HCIBLOCKADDR	_IOW('H', 230, int)
+#define HCIUNBLOCKADDR	_IOW('H', 231, int)
+
+#define HCIINQUIRY	_IOR('H', 240, int)
+
+/* HCI timeouts */
+#define HCI_CONNECT_TIMEOUT	(40000)	/* 40 seconds */
+#define HCI_DISCONN_TIMEOUT	(2000)	/* 2 seconds */
+#define HCI_PAIRING_TIMEOUT	(60000)	/* 60 seconds */
+#define HCI_IDLE_TIMEOUT	(6000)	/* 6 seconds */
+#define HCI_INIT_TIMEOUT	(10000)	/* 10 seconds */
+#define HCI_CMD_TIMEOUT		(1000)	/* 1 seconds */
+
+/* HCI data types */
+#define HCI_COMMAND_PKT		0x01
+#define HCI_ACLDATA_PKT		0x02
+#define HCI_SCODATA_PKT		0x03
+#define HCI_EVENT_PKT		0x04
+#define HCI_VENDOR_PKT		0xff
+
+/* HCI packet types */
+#define HCI_DM1		0x0008
+#define HCI_DM3		0x0400
+#define HCI_DM5		0x4000
+#define HCI_DH1		0x0010
+#define HCI_DH3		0x0800
+#define HCI_DH5		0x8000
+
+#define HCI_HV1		0x0020
+#define HCI_HV2		0x0040
+#define HCI_HV3		0x0080
+
+#define SCO_PTYPE_MASK	(HCI_HV1 | HCI_HV2 | HCI_HV3)
+#define ACL_PTYPE_MASK	(~SCO_PTYPE_MASK)
+
+/* eSCO packet types */
+#define ESCO_HV1	0x0001
+#define ESCO_HV2	0x0002
+#define ESCO_HV3	0x0004
+#define ESCO_EV3	0x0008
+#define ESCO_EV4	0x0010
+#define ESCO_EV5	0x0020
+#define ESCO_2EV3	0x0040
+#define ESCO_3EV3	0x0080
+#define ESCO_2EV5	0x0100
+#define ESCO_3EV5	0x0200
+
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK  (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+
+/* ACL flags */
+#define ACL_START_NO_FLUSH	0x00
+#define ACL_CONT		0x01
+#define ACL_START		0x02
+#define ACL_ACTIVE_BCAST	0x04
+#define ACL_PICO_BCAST		0x08
+
+/* Baseband links */
+#define SCO_LINK	0x00
+#define ACL_LINK	0x01
+#define ESCO_LINK	0x02
+/* Low Energy links do not have defined link type. Use invented one */
+#define LE_LINK		0x80
+
+/* LMP features */
+#define LMP_3SLOT	0x01
+#define LMP_5SLOT	0x02
+#define LMP_ENCRYPT	0x04
+#define LMP_SOFFSET	0x08
+#define LMP_TACCURACY	0x10
+#define LMP_RSWITCH	0x20
+#define LMP_HOLD	0x40
+#define LMP_SNIFF	0x80
+
+#define LMP_PARK	0x01
+#define LMP_RSSI	0x02
+#define LMP_QUALITY	0x04
+#define LMP_SCO		0x08
+#define LMP_HV2		0x10
+#define LMP_HV3		0x20
+#define LMP_ULAW	0x40
+#define LMP_ALAW	0x80
+
+#define LMP_CVSD	0x01
+#define LMP_PSCHEME	0x02
+#define LMP_PCONTROL	0x04
+
+#define LMP_RSSI_INQ	0x40
+#define LMP_ESCO	0x80
+
+#define LMP_EV4		0x01
+#define LMP_EV5		0x02
+#define LMP_LE		0x40
+
+#define LMP_SNIFF_SUBR	0x02
+#define LMP_PAUSE_ENC	0x04
+#define LMP_EDR_ESCO_2M	0x20
+#define LMP_EDR_ESCO_3M	0x40
+#define LMP_EDR_3S_ESCO	0x80
+
+#define LMP_EXT_INQ	0x01
+#define LMP_SIMUL_LE_BR	0x02
+#define LMP_SIMPLE_PAIR	0x08
+#define LMP_NO_FLUSH	0x40
+
+#define LMP_LSTO	0x01
+#define LMP_INQ_TX_PWR	0x02
+#define LMP_EXTFEATURES	0x80
+
+/* Extended LMP features */
+#define LMP_HOST_LE	0x02
+
+/* Connection modes */
+#define HCI_CM_ACTIVE	0x0000
+#define HCI_CM_HOLD	0x0001
+#define HCI_CM_SNIFF	0x0002
+#define HCI_CM_PARK	0x0003
+
+/* Link policies */
+#define HCI_LP_RSWITCH	0x0001
+#define HCI_LP_HOLD	0x0002
+#define HCI_LP_SNIFF	0x0004
+#define HCI_LP_PARK	0x0008
+
+/* Link modes */
+#define HCI_LM_ACCEPT	0x8000
+#define HCI_LM_MASTER	0x0001
+#define HCI_LM_AUTH	0x0002
+#define HCI_LM_ENCRYPT	0x0004
+#define HCI_LM_TRUSTED	0x0008
+#define HCI_LM_RELIABLE	0x0010
+#define HCI_LM_SECURE	0x0020
+
+/* Authentication types */
+#define HCI_AT_NO_BONDING		0x00
+#define HCI_AT_NO_BONDING_MITM		0x01
+#define HCI_AT_DEDICATED_BONDING	0x02
+#define HCI_AT_DEDICATED_BONDING_MITM	0x03
+#define HCI_AT_GENERAL_BONDING		0x04
+#define HCI_AT_GENERAL_BONDING_MITM	0x05
+
+/* Link Key types */
+#define HCI_LK_COMBINATION		0x00
+#define HCI_LK_LOCAL_UNIT		0x01
+#define HCI_LK_REMOTE_UNIT		0x02
+#define HCI_LK_DEBUG_COMBINATION	0x03
+#define HCI_LK_UNAUTH_COMBINATION	0x04
+#define HCI_LK_AUTH_COMBINATION		0x05
+#define HCI_LK_CHANGED_COMBINATION	0x06
+/* The spec doesn't define types for SMP keys */
+#define HCI_LK_SMP_LTK			0x81
+#define HCI_LK_SMP_IRK			0x82
+#define HCI_LK_SMP_CSRK			0x83
+
+/* ---- HCI Error Codes ---- */
+#define HCI_ERROR_AUTH_FAILURE		0x05
+#define HCI_ERROR_REJ_BAD_ADDR		0x0f
+#define HCI_ERROR_REMOTE_USER_TERM	0x13
+#define HCI_ERROR_LOCAL_HOST_TERM	0x16
+#define HCI_ERROR_PAIRING_NOT_ALLOWED	0x18
+
+/* -----  HCI Commands ---- */
+#define HCI_OP_NOP			0x0000
+
+#define HCI_OP_INQUIRY			0x0401
+struct hci_cp_inquiry {
+	__u8     lap[3];
+	__u8     length;
+	__u8     num_rsp;
+} __packed;
+
+#define HCI_OP_INQUIRY_CANCEL		0x0402
+
+#define HCI_OP_EXIT_PERIODIC_INQ	0x0404
+
+#define HCI_OP_CREATE_CONN		0x0405
+struct hci_cp_create_conn {
+	bdaddr_t bdaddr;
+	__le16   pkt_type;
+	__u8     pscan_rep_mode;
+	__u8     pscan_mode;
+	__le16   clock_offset;
+	__u8     role_switch;
+} __packed;
+
+#define HCI_OP_DISCONNECT		0x0406
+struct hci_cp_disconnect {
+	__le16   handle;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_ADD_SCO			0x0407
+struct hci_cp_add_sco {
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_CREATE_CONN_CANCEL	0x0408
+struct hci_cp_create_conn_cancel {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_ACCEPT_CONN_REQ		0x0409
+struct hci_cp_accept_conn_req {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_REJECT_CONN_REQ		0x040a
+struct hci_cp_reject_conn_req {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_LINK_KEY_REPLY		0x040b
+struct hci_cp_link_key_reply {
+	bdaddr_t bdaddr;
+	__u8     link_key[16];
+} __packed;
+
+#define HCI_OP_LINK_KEY_NEG_REPLY	0x040c
+struct hci_cp_link_key_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_PIN_CODE_REPLY		0x040d
+struct hci_cp_pin_code_reply {
+	bdaddr_t bdaddr;
+	__u8     pin_len;
+	__u8     pin_code[16];
+} __packed;
+struct hci_rp_pin_code_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_PIN_CODE_NEG_REPLY	0x040e
+struct hci_cp_pin_code_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+struct hci_rp_pin_code_neg_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_CHANGE_CONN_PTYPE	0x040f
+struct hci_cp_change_conn_ptype {
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_AUTH_REQUESTED		0x0411
+struct hci_cp_auth_requested {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_SET_CONN_ENCRYPT		0x0413
+struct hci_cp_set_conn_encrypt {
+	__le16   handle;
+	__u8     encrypt;
+} __packed;
+
+#define HCI_OP_CHANGE_CONN_LINK_KEY	0x0415
+struct hci_cp_change_conn_link_key {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_REMOTE_NAME_REQ		0x0419
+struct hci_cp_remote_name_req {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_mode;
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_OP_REMOTE_NAME_REQ_CANCEL	0x041a
+struct hci_cp_remote_name_req_cancel {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_FEATURES	0x041b
+struct hci_cp_read_remote_features {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_EXT_FEATURES	0x041c
+struct hci_cp_read_remote_ext_features {
+	__le16   handle;
+	__u8     page;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_VERSION	0x041d
+struct hci_cp_read_remote_version {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_SETUP_SYNC_CONN		0x0428
+struct hci_cp_setup_sync_conn {
+	__le16   handle;
+	__le32   tx_bandwidth;
+	__le32   rx_bandwidth;
+	__le16   max_latency;
+	__le16   voice_setting;
+	__u8     retrans_effort;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_ACCEPT_SYNC_CONN_REQ	0x0429
+struct hci_cp_accept_sync_conn_req {
+	bdaddr_t bdaddr;
+	__le32   tx_bandwidth;
+	__le32   rx_bandwidth;
+	__le16   max_latency;
+	__le16   content_format;
+	__u8     retrans_effort;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_REJECT_SYNC_CONN_REQ	0x042a
+struct hci_cp_reject_sync_conn_req {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_IO_CAPABILITY_REPLY	0x042b
+struct hci_cp_io_capability_reply {
+	bdaddr_t bdaddr;
+	__u8     capability;
+	__u8     oob_data;
+	__u8     authentication;
+} __packed;
+
+#define HCI_OP_USER_CONFIRM_REPLY		0x042c
+struct hci_cp_user_confirm_reply {
+	bdaddr_t bdaddr;
+} __packed;
+struct hci_rp_user_confirm_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_USER_CONFIRM_NEG_REPLY	0x042d
+
+#define HCI_OP_REMOTE_OOB_DATA_REPLY	0x0430
+struct hci_cp_remote_oob_data_reply {
+	bdaddr_t bdaddr;
+	__u8     hash[16];
+	__u8     randomizer[16];
+} __packed;
+
+#define HCI_OP_REMOTE_OOB_DATA_NEG_REPLY	0x0433
+struct hci_cp_remote_oob_data_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_IO_CAPABILITY_NEG_REPLY	0x0434
+struct hci_cp_io_capability_neg_reply {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_SNIFF_MODE		0x0803
+struct hci_cp_sniff_mode {
+	__le16   handle;
+	__le16   max_interval;
+	__le16   min_interval;
+	__le16   attempt;
+	__le16   timeout;
+} __packed;
+
+#define HCI_OP_EXIT_SNIFF_MODE		0x0804
+struct hci_cp_exit_sniff_mode {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_ROLE_DISCOVERY		0x0809
+struct hci_cp_role_discovery {
+	__le16   handle;
+} __packed;
+struct hci_rp_role_discovery {
+	__u8     status;
+	__le16   handle;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_SWITCH_ROLE		0x080b
+struct hci_cp_switch_role {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_READ_LINK_POLICY		0x080c
+struct hci_cp_read_link_policy {
+	__le16   handle;
+} __packed;
+struct hci_rp_read_link_policy {
+	__u8     status;
+	__le16   handle;
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_WRITE_LINK_POLICY	0x080d
+struct hci_cp_write_link_policy {
+	__le16   handle;
+	__le16   policy;
+} __packed;
+struct hci_rp_write_link_policy {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_READ_DEF_LINK_POLICY	0x080e
+struct hci_rp_read_def_link_policy {
+	__u8     status;
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_WRITE_DEF_LINK_POLICY	0x080f
+struct hci_cp_write_def_link_policy {
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_SNIFF_SUBRATE		0x0811
+struct hci_cp_sniff_subrate {
+	__le16   handle;
+	__le16   max_latency;
+	__le16   min_remote_timeout;
+	__le16   min_local_timeout;
+} __packed;
+
+#define HCI_OP_SET_EVENT_MASK		0x0c01
+struct hci_cp_set_event_mask {
+	__u8     mask[8];
+} __packed;
+
+#define HCI_OP_RESET			0x0c03
+
+#define HCI_OP_SET_EVENT_FLT		0x0c05
+struct hci_cp_set_event_flt {
+	__u8     flt_type;
+	__u8     cond_type;
+	__u8     condition[0];
+} __packed;
+
+/* Filter types */
+#define HCI_FLT_CLEAR_ALL	0x00
+#define HCI_FLT_INQ_RESULT	0x01
+#define HCI_FLT_CONN_SETUP	0x02
+
+/* CONN_SETUP Condition types */
+#define HCI_CONN_SETUP_ALLOW_ALL	0x00
+#define HCI_CONN_SETUP_ALLOW_CLASS	0x01
+#define HCI_CONN_SETUP_ALLOW_BDADDR	0x02
+
+/* CONN_SETUP Conditions */
+#define HCI_CONN_SETUP_AUTO_OFF	0x01
+#define HCI_CONN_SETUP_AUTO_ON	0x02
+
+#define HCI_OP_DELETE_STORED_LINK_KEY	0x0c12
+struct hci_cp_delete_stored_link_key {
+	bdaddr_t bdaddr;
+	__u8     delete_all;
+} __packed;
+
+#define HCI_MAX_NAME_LENGTH		248
+
+#define HCI_OP_WRITE_LOCAL_NAME		0x0c13
+struct hci_cp_write_local_name {
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_NAME		0x0c14
+struct hci_rp_read_local_name {
+	__u8     status;
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_OP_WRITE_CA_TIMEOUT		0x0c16
+
+#define HCI_OP_WRITE_PG_TIMEOUT		0x0c18
+
+#define HCI_OP_WRITE_SCAN_ENABLE	0x0c1a
+	#define SCAN_DISABLED		0x00
+	#define SCAN_INQUIRY		0x01
+	#define SCAN_PAGE		0x02
+
+#define HCI_OP_READ_AUTH_ENABLE		0x0c1f
+
+#define HCI_OP_WRITE_AUTH_ENABLE	0x0c20
+	#define AUTH_DISABLED		0x00
+	#define AUTH_ENABLED		0x01
+
+#define HCI_OP_READ_ENCRYPT_MODE	0x0c21
+
+#define HCI_OP_WRITE_ENCRYPT_MODE	0x0c22
+	#define ENCRYPT_DISABLED	0x00
+	#define ENCRYPT_P2P		0x01
+	#define ENCRYPT_BOTH		0x02
+
+#define HCI_OP_READ_CLASS_OF_DEV	0x0c23
+struct hci_rp_read_class_of_dev {
+	__u8     status;
+	__u8     dev_class[3];
+} __packed;
+
+#define HCI_OP_WRITE_CLASS_OF_DEV	0x0c24
+struct hci_cp_write_class_of_dev {
+	__u8     dev_class[3];
+} __packed;
+
+#define HCI_OP_READ_VOICE_SETTING	0x0c25
+struct hci_rp_read_voice_setting {
+	__u8     status;
+	__le16   voice_setting;
+} __packed;
+
+#define HCI_OP_WRITE_VOICE_SETTING	0x0c26
+struct hci_cp_write_voice_setting {
+	__le16   voice_setting;
+} __packed;
+
+#define HCI_OP_HOST_BUFFER_SIZE		0x0c33
+struct hci_cp_host_buffer_size {
+	__le16   acl_mtu;
+	__u8     sco_mtu;
+	__le16   acl_max_pkt;
+	__le16   sco_max_pkt;
+} __packed;
+
+#define HCI_OP_WRITE_INQUIRY_MODE	0x0c45
+
+#define HCI_MAX_EIR_LENGTH		240
+
+#define HCI_OP_WRITE_EIR		0x0c52
+struct hci_cp_write_eir {
+	uint8_t		fec;
+	uint8_t		data[HCI_MAX_EIR_LENGTH];
+} __packed;
+
+#define HCI_OP_READ_SSP_MODE		0x0c55
+struct hci_rp_read_ssp_mode {
+	__u8     status;
+	__u8     mode;
+} __packed;
+
+#define HCI_OP_WRITE_SSP_MODE		0x0c56
+struct hci_cp_write_ssp_mode {
+	__u8     mode;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_OOB_DATA		0x0c57
+struct hci_rp_read_local_oob_data {
+	__u8     status;
+	__u8     hash[16];
+	__u8     randomizer[16];
+} __packed;
+
+#define HCI_OP_READ_INQ_RSP_TX_POWER	0x0c58
+
+#define HCI_OP_WRITE_LE_HOST_SUPPORTED	0x0c6d
+struct hci_cp_write_le_host_supported {
+	__u8 le;
+	__u8 simul;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_VERSION	0x1001
+struct hci_rp_read_local_version {
+	__u8     status;
+	__u8     hci_ver;
+	__le16   hci_rev;
+	__u8     lmp_ver;
+	__le16   manufacturer;
+	__le16   lmp_subver;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_COMMANDS	0x1002
+struct hci_rp_read_local_commands {
+	__u8     status;
+	__u8     commands[64];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_FEATURES	0x1003
+struct hci_rp_read_local_features {
+	__u8     status;
+	__u8     features[8];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_EXT_FEATURES	0x1004
+struct hci_cp_read_local_ext_features {
+	__u8     page;
+} __packed;
+struct hci_rp_read_local_ext_features {
+	__u8     status;
+	__u8     page;
+	__u8     max_page;
+	__u8     features[8];
+} __packed;
+
+#define HCI_OP_READ_BUFFER_SIZE		0x1005
+struct hci_rp_read_buffer_size {
+	__u8     status;
+	__le16   acl_mtu;
+	__u8     sco_mtu;
+	__le16   acl_max_pkt;
+	__le16   sco_max_pkt;
+} __packed;
+
+#define HCI_OP_READ_BD_ADDR		0x1009
+struct hci_rp_read_bd_addr {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_WRITE_PAGE_SCAN_ACTIVITY	0x0c1c
+struct hci_cp_write_page_scan_activity {
+	__le16   interval;
+	__le16   window;
+} __packed;
+
+#define HCI_OP_WRITE_PAGE_SCAN_TYPE	0x0c47
+	#define PAGE_SCAN_TYPE_STANDARD		0x00
+	#define PAGE_SCAN_TYPE_INTERLACED	0x01
+
+#define HCI_OP_READ_LOCAL_AMP_INFO	0x1409
+struct hci_rp_read_local_amp_info {
+	__u8     status;
+	__u8     amp_status;
+	__le32   total_bw;
+	__le32   max_bw;
+	__le32   min_latency;
+	__le32   max_pdu;
+	__u8     amp_type;
+	__le16   pal_cap;
+	__le16   max_assoc_size;
+	__le32   max_flush_to;
+	__le32   be_flush_to;
+} __packed;
+
+#define HCI_OP_LE_SET_EVENT_MASK	0x2001
+struct hci_cp_le_set_event_mask {
+	__u8     mask[8];
+} __packed;
+
+#define HCI_OP_LE_READ_BUFFER_SIZE	0x2002
+struct hci_rp_le_read_buffer_size {
+	__u8     status;
+	__le16   le_mtu;
+	__u8     le_max_pkt;
+} __packed;
+
+#define HCI_OP_LE_SET_SCAN_ENABLE	0x200c
+struct hci_cp_le_set_scan_enable {
+	__u8     enable;
+	__u8     filter_dup;
+} __packed;
+
+#define HCI_OP_LE_CREATE_CONN		0x200d
+struct hci_cp_le_create_conn {
+	__le16   scan_interval;
+	__le16   scan_window;
+	__u8     filter_policy;
+	__u8     peer_addr_type;
+	bdaddr_t peer_addr;
+	__u8     own_address_type;
+	__le16   conn_interval_min;
+	__le16   conn_interval_max;
+	__le16   conn_latency;
+	__le16   supervision_timeout;
+	__le16   min_ce_len;
+	__le16   max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_CREATE_CONN_CANCEL	0x200e
+
+#define HCI_OP_LE_CONN_UPDATE		0x2013
+struct hci_cp_le_conn_update {
+	__le16   handle;
+	__le16   conn_interval_min;
+	__le16   conn_interval_max;
+	__le16   conn_latency;
+	__le16   supervision_timeout;
+	__le16   min_ce_len;
+	__le16   max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_START_ENC		0x2019
+struct hci_cp_le_start_enc {
+	__le16	handle;
+	__u8	rand[8];
+	__le16	ediv;
+	__u8	ltk[16];
+} __packed;
+
+#define HCI_OP_LE_LTK_REPLY		0x201a
+struct hci_cp_le_ltk_reply {
+	__le16	handle;
+	__u8	ltk[16];
+} __packed;
+struct hci_rp_le_ltk_reply {
+	__u8	status;
+	__le16	handle;
+} __packed;
+
+#define HCI_OP_LE_LTK_NEG_REPLY		0x201b
+struct hci_cp_le_ltk_neg_reply {
+	__le16	handle;
+} __packed;
+struct hci_rp_le_ltk_neg_reply {
+	__u8	status;
+	__le16	handle;
+} __packed;
+
+/* ---- HCI Events ---- */
+#define HCI_EV_INQUIRY_COMPLETE		0x01
+
+#define HCI_EV_INQUIRY_RESULT		0x02
+struct inquiry_info {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     pscan_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_EV_CONN_COMPLETE		0x03
+struct hci_ev_conn_complete {
+	__u8     status;
+	__le16   handle;
+	bdaddr_t bdaddr;
+	__u8     link_type;
+	__u8     encr_mode;
+} __packed;
+
+#define HCI_EV_CONN_REQUEST		0x04
+struct hci_ev_conn_request {
+	bdaddr_t bdaddr;
+	__u8     dev_class[3];
+	__u8     link_type;
+} __packed;
+
+#define HCI_EV_DISCONN_COMPLETE		0x05
+struct hci_ev_disconn_complete {
+	__u8     status;
+	__le16   handle;
+	__u8     reason;
+} __packed;
+
+#define HCI_EV_AUTH_COMPLETE		0x06
+struct hci_ev_auth_complete {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_EV_REMOTE_NAME		0x07
+struct hci_ev_remote_name {
+	__u8     status;
+	bdaddr_t bdaddr;
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_EV_ENCRYPT_CHANGE		0x08
+struct hci_ev_encrypt_change {
+	__u8     status;
+	__le16   handle;
+	__u8     encrypt;
+} __packed;
+
+#define HCI_EV_CHANGE_LINK_KEY_COMPLETE	0x09
+struct hci_ev_change_link_key_complete {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_EV_REMOTE_FEATURES		0x0b
+struct hci_ev_remote_features {
+	__u8     status;
+	__le16   handle;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_REMOTE_VERSION		0x0c
+struct hci_ev_remote_version {
+	__u8     status;
+	__le16   handle;
+	__u8     lmp_ver;
+	__le16   manufacturer;
+	__le16   lmp_subver;
+} __packed;
+
+#define HCI_EV_QOS_SETUP_COMPLETE	0x0d
+struct hci_qos {
+	__u8     service_type;
+	__u32    token_rate;
+	__u32    peak_bandwidth;
+	__u32    latency;
+	__u32    delay_variation;
+} __packed;
+struct hci_ev_qos_setup_complete {
+	__u8     status;
+	__le16   handle;
+	struct   hci_qos qos;
+} __packed;
+
+#define HCI_EV_CMD_COMPLETE		0x0e
+struct hci_ev_cmd_complete {
+	__u8     ncmd;
+	__le16   opcode;
+} __packed;
+
+#define HCI_EV_CMD_STATUS		0x0f
+struct hci_ev_cmd_status {
+	__u8     status;
+	__u8     ncmd;
+	__le16   opcode;
+} __packed;
+
+#define HCI_EV_ROLE_CHANGE		0x12
+struct hci_ev_role_change {
+	__u8     status;
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_EV_NUM_COMP_PKTS		0x13
+struct hci_ev_num_comp_pkts {
+	__u8     num_hndl;
+	/* variable length part */
+} __packed;
+
+#define HCI_EV_MODE_CHANGE		0x14
+struct hci_ev_mode_change {
+	__u8     status;
+	__le16   handle;
+	__u8     mode;
+	__le16   interval;
+} __packed;
+
+#define HCI_EV_PIN_CODE_REQ		0x16
+struct hci_ev_pin_code_req {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_LINK_KEY_REQ		0x17
+struct hci_ev_link_key_req {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_LINK_KEY_NOTIFY		0x18
+struct hci_ev_link_key_notify {
+	bdaddr_t bdaddr;
+	__u8     link_key[16];
+	__u8     key_type;
+} __packed;
+
+#define HCI_EV_CLOCK_OFFSET		0x1c
+struct hci_ev_clock_offset {
+	__u8     status;
+	__le16   handle;
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_EV_PKT_TYPE_CHANGE		0x1d
+struct hci_ev_pkt_type_change {
+	__u8     status;
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_EV_PSCAN_REP_MODE		0x20
+struct hci_ev_pscan_rep_mode {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+} __packed;
+
+#define HCI_EV_INQUIRY_RESULT_WITH_RSSI	0x22
+struct inquiry_info_with_rssi {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+} __packed;
+struct inquiry_info_with_rssi_and_pscan_mode {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     pscan_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+} __packed;
+
+#define HCI_EV_REMOTE_EXT_FEATURES	0x23
+struct hci_ev_remote_ext_features {
+	__u8     status;
+	__le16   handle;
+	__u8     page;
+	__u8     max_page;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_SYNC_CONN_COMPLETE	0x2c
+struct hci_ev_sync_conn_complete {
+	__u8     status;
+	__le16   handle;
+	bdaddr_t bdaddr;
+	__u8     link_type;
+	__u8     tx_interval;
+	__u8     retrans_window;
+	__le16   rx_pkt_len;
+	__le16   tx_pkt_len;
+	__u8     air_mode;
+} __packed;
+
+#define HCI_EV_SYNC_CONN_CHANGED	0x2d
+struct hci_ev_sync_conn_changed {
+	__u8     status;
+	__le16   handle;
+	__u8     tx_interval;
+	__u8     retrans_window;
+	__le16   rx_pkt_len;
+	__le16   tx_pkt_len;
+} __packed;
+
+#define HCI_EV_SNIFF_SUBRATE		0x2e
+struct hci_ev_sniff_subrate {
+	__u8     status;
+	__le16   handle;
+	__le16   max_tx_latency;
+	__le16   max_rx_latency;
+	__le16   max_remote_timeout;
+	__le16   max_local_timeout;
+} __packed;
+
+#define HCI_EV_EXTENDED_INQUIRY_RESULT	0x2f
+struct extended_inquiry_info {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+	__u8     data[240];
+} __packed;
+
+#define HCI_EV_IO_CAPA_REQUEST		0x31
+struct hci_ev_io_capa_request {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_IO_CAPA_REPLY		0x32
+struct hci_ev_io_capa_reply {
+	bdaddr_t bdaddr;
+	__u8     capability;
+	__u8     oob_data;
+	__u8     authentication;
+} __packed;
+
+#define HCI_EV_USER_CONFIRM_REQUEST	0x33
+struct hci_ev_user_confirm_req {
+	bdaddr_t	bdaddr;
+	__le32		passkey;
+} __packed;
+
+#define HCI_EV_REMOTE_OOB_DATA_REQUEST	0x35
+struct hci_ev_remote_oob_data_request {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_SIMPLE_PAIR_COMPLETE	0x36
+struct hci_ev_simple_pair_complete {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_REMOTE_HOST_FEATURES	0x3d
+struct hci_ev_remote_host_features {
+	bdaddr_t bdaddr;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_LE_META			0x3e
+struct hci_ev_le_meta {
+	__u8     subevent;
+} __packed;
+
+/* Low energy meta events */
+#define HCI_EV_LE_CONN_COMPLETE		0x01
+struct hci_ev_le_conn_complete {
+	__u8     status;
+	__le16   handle;
+	__u8     role;
+	__u8     bdaddr_type;
+	bdaddr_t bdaddr;
+	__le16   interval;
+	__le16   latency;
+	__le16   supervision_timeout;
+	__u8     clk_accurancy;
+} __packed;
+
+#define HCI_EV_LE_LTK_REQ		0x05
+struct hci_ev_le_ltk_req {
+	__le16	handle;
+	__u8	random[8];
+	__le16	ediv;
+} __packed;
+
+/* Advertising report event types */
+#define ADV_IND		0x00
+#define ADV_DIRECT_IND	0x01
+#define ADV_SCAN_IND	0x02
+#define ADV_NONCONN_IND	0x03
+#define ADV_SCAN_RSP	0x04
+
+#define ADDR_LE_DEV_PUBLIC	0x00
+#define ADDR_LE_DEV_RANDOM	0x01
+
+#define HCI_EV_LE_ADVERTISING_REPORT	0x02
+struct hci_ev_le_advertising_info {
+	__u8	 evt_type;
+	__u8	 bdaddr_type;
+	bdaddr_t bdaddr;
+	__u8	 length;
+	__u8	 data[0];
+} __packed;
+
+/* Internal events generated by Bluetooth stack */
+#define HCI_EV_STACK_INTERNAL	0xfd
+struct hci_ev_stack_internal {
+	__u16    type;
+	__u8     data[0];
+} __packed;
+
+#define HCI_EV_SI_DEVICE	0x01
+struct hci_ev_si_device {
+	__u16    event;
+	__u16    dev_id;
+} __packed;
+
+#define HCI_EV_SI_SECURITY	0x02
+struct hci_ev_si_security {
+	__u16    event;
+	__u16    proto;
+	__u16    subproto;
+	__u8     incoming;
+} __packed;
+
+/* ---- HCI Packet structures ---- */
+#define HCI_COMMAND_HDR_SIZE 3
+#define HCI_EVENT_HDR_SIZE   2
+#define HCI_ACL_HDR_SIZE     4
+#define HCI_SCO_HDR_SIZE     3
+
+struct hci_command_hdr {
+	__le16	opcode;		/* OCF & OGF */
+	__u8	plen;
+} __packed;
+
+struct hci_event_hdr {
+	__u8	evt;
+	__u8	plen;
+} __packed;
+
+struct hci_acl_hdr {
+	__le16	handle;		/* Handle & Flags(PB, BC) */
+	__le16	dlen;
+} __packed;
+
+struct hci_sco_hdr {
+	__le16	handle;
+	__u8	dlen;
+} __packed;
+
+#include <linux/skbuff.h>
+static inline struct hci_event_hdr *hci_event_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_event_hdr *) skb->data;
+}
+
+static inline struct hci_acl_hdr *hci_acl_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_acl_hdr *) skb->data;
+}
+
+static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_sco_hdr *) skb->data;
+}
+
+/* Command opcode pack/unpack */
+#define hci_opcode_pack(ogf, ocf)	(__u16) ((ocf & 0x03ff)|(ogf << 10))
+#define hci_opcode_ogf(op)		(op >> 10)
+#define hci_opcode_ocf(op)		(op & 0x03ff)
+
+/* ACL handle and flags pack/unpack */
+#define hci_handle_pack(h, f)	(__u16) ((h & 0x0fff)|(f << 12))
+#define hci_handle(h)		(h & 0x0fff)
+#define hci_flags(h)		(h >> 12)
+
+/* ---- HCI Sockets ---- */
+
+/* Socket options */
+#define HCI_DATA_DIR	1
+#define HCI_FILTER	2
+#define HCI_TIME_STAMP	3
+
+/* CMSG flags */
+#define HCI_CMSG_DIR	0x0001
+#define HCI_CMSG_TSTAMP	0x0002
+
+struct sockaddr_hci {
+	sa_family_t    hci_family;
+	unsigned short hci_dev;
+	unsigned short hci_channel;
+};
+#define HCI_DEV_NONE	0xffff
+
+#define HCI_CHANNEL_RAW		0
+#define HCI_CHANNEL_CONTROL	1
+
+struct hci_filter {
+	unsigned long type_mask;
+	unsigned long event_mask[2];
+	__le16 opcode;
+};
+
+struct hci_ufilter {
+	__u32  type_mask;
+	__u32  event_mask[2];
+	__le16 opcode;
+};
+
+#define HCI_FLT_TYPE_BITS	31
+#define HCI_FLT_EVENT_BITS	63
+#define HCI_FLT_OGF_BITS	63
+#define HCI_FLT_OCF_BITS	127
+
+/* ---- HCI Ioctl requests structures ---- */
+struct hci_dev_stats {
+	__u32 err_rx;
+	__u32 err_tx;
+	__u32 cmd_tx;
+	__u32 evt_rx;
+	__u32 acl_tx;
+	__u32 acl_rx;
+	__u32 sco_tx;
+	__u32 sco_rx;
+	__u32 byte_rx;
+	__u32 byte_tx;
+};
+
+struct hci_dev_info {
+	__u16 dev_id;
+	char  name[8];
+
+	bdaddr_t bdaddr;
+
+	__u32 flags;
+	__u8  type;
+
+	__u8  features[8];
+
+	__u32 pkt_type;
+	__u32 link_policy;
+	__u32 link_mode;
+
+	__u16 acl_mtu;
+	__u16 acl_pkts;
+	__u16 sco_mtu;
+	__u16 sco_pkts;
+
+	struct hci_dev_stats stat;
+};
+
+struct hci_conn_info {
+	__u16    handle;
+	bdaddr_t bdaddr;
+	__u8     type;
+	__u8     out;
+	__u16    state;
+	__u32    link_mode;
+};
+
+struct hci_dev_req {
+	__u16  dev_id;
+	__u32  dev_opt;
+};
+
+struct hci_dev_list_req {
+	__u16  dev_num;
+	struct hci_dev_req dev_req[0];	/* hci_dev_req structures */
+};
+
+struct hci_conn_list_req {
+	__u16  dev_id;
+	__u16  conn_num;
+	struct hci_conn_info conn_info[0];
+};
+
+struct hci_conn_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+	struct   hci_conn_info conn_info[0];
+};
+
+struct hci_auth_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+};
+
+struct hci_inquiry_req {
+	__u16 dev_id;
+	__u16 flags;
+	__u8  lap[3];
+	__u8  length;
+	__u8  num_rsp;
+};
+#define IREQ_CACHE_FLUSH 0x0001
+
+#endif /* __HCI_H */
diff --git a/include/compat/net/bluetooth/hci_core.h b/include/compat/net/bluetooth/hci_core.h
new file mode 100755
index 0000000..f333e76
--- /dev/null
+++ b/include/compat/net/bluetooth/hci_core.h
@@ -0,0 +1,988 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_CORE_H
+#define __HCI_CORE_H
+
+#include <linux/interrupt.h>
+#include <net/bluetooth/hci.h>
+
+/* HCI upper protocols */
+#define HCI_PROTO_L2CAP	0
+#define HCI_PROTO_SCO	1
+
+/* HCI priority */
+#define HCI_PRIO_MAX	7
+
+/* HCI Core structures */
+struct inquiry_data {
+	bdaddr_t	bdaddr;
+	__u8		pscan_rep_mode;
+	__u8		pscan_period_mode;
+	__u8		pscan_mode;
+	__u8		dev_class[3];
+	__le16		clock_offset;
+	__s8		rssi;
+	__u8		ssp_mode;
+};
+
+struct inquiry_entry {
+	struct inquiry_entry	*next;
+	__u32			timestamp;
+	struct inquiry_data	data;
+};
+
+struct inquiry_cache {
+	spinlock_t		lock;
+	__u32			timestamp;
+	struct inquiry_entry	*list;
+};
+
+struct hci_conn_hash {
+	struct list_head list;
+	spinlock_t       lock;
+	unsigned int     acl_num;
+	unsigned int     sco_num;
+	unsigned int     le_num;
+};
+
+struct hci_chan_hash {
+	struct list_head list;
+	spinlock_t       lock;
+	unsigned int     num;
+};
+
+struct bdaddr_list {
+	struct list_head list;
+	bdaddr_t bdaddr;
+};
+
+struct bt_uuid {
+	struct list_head list;
+	u8 uuid[16];
+	u8 svc_hint;
+};
+
+struct key_master_id {
+	__le16 ediv;
+	u8 rand[8];
+} __packed;
+
+struct link_key_data {
+	bdaddr_t bdaddr;
+	u8 type;
+	u8 val[16];
+	u8 pin_len;
+	u8 dlen;
+	u8 data[0];
+} __packed;
+
+struct link_key {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 type;
+	u8 val[16];
+	u8 pin_len;
+	u8 dlen;
+	u8 data[0];
+};
+
+struct oob_data {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 hash[16];
+	u8 randomizer[16];
+};
+
+struct adv_entry {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 bdaddr_type;
+};
+
+#define NUM_REASSEMBLY 4
+struct hci_dev {
+	struct list_head list;
+	spinlock_t	lock;
+	atomic_t	refcnt;
+
+	char		name[8];
+	unsigned long	flags;
+	__u16		id;
+	__u8		bus;
+	__u8		dev_type;
+	bdaddr_t	bdaddr;
+	__u8		dev_name[HCI_MAX_NAME_LENGTH];
+	__u8		eir[HCI_MAX_EIR_LENGTH];
+	__u8		dev_class[3];
+	__u8		major_class;
+	__u8		minor_class;
+	__u8		features[8];
+	__u8		extfeatures[8];
+	__u8		commands[64];
+	__u8		ssp_mode;
+	__u8		hci_ver;
+	__u16		hci_rev;
+	__u8		lmp_ver;
+	__u16		manufacturer;
+	__le16		lmp_subver;
+	__u16		voice_setting;
+	__u8		io_capability;
+
+	__u16		pkt_type;
+	__u16		esco_type;
+	__u16		link_policy;
+	__u16		link_mode;
+
+	__u32		idle_timeout;
+	__u16		sniff_min_interval;
+	__u16		sniff_max_interval;
+
+	__u8		amp_status;
+	__u32		amp_total_bw;
+	__u32		amp_max_bw;
+	__u32		amp_min_latency;
+	__u32		amp_max_pdu;
+	__u8		amp_type;
+	__u16		amp_pal_cap;
+	__u16		amp_assoc_size;
+	__u32		amp_max_flush_to;
+	__u32		amp_be_flush_to;
+
+	unsigned int	auto_accept_delay;
+
+	unsigned long	quirks;
+
+	atomic_t	cmd_cnt;
+	unsigned int	acl_cnt;
+	unsigned int	sco_cnt;
+	unsigned int	le_cnt;
+
+	unsigned int	acl_mtu;
+	unsigned int	sco_mtu;
+	unsigned int	le_mtu;
+	unsigned int	acl_pkts;
+	unsigned int	sco_pkts;
+	unsigned int	le_pkts;
+
+	unsigned long	acl_last_tx;
+	unsigned long	sco_last_tx;
+	unsigned long	le_last_tx;
+
+	struct workqueue_struct	*workqueue;
+
+	struct work_struct	power_on;
+	struct delayed_work	power_off;
+
+	__u16			discov_timeout;
+	struct delayed_work	discov_off;
+
+	struct timer_list	cmd_timer;
+	struct tasklet_struct	cmd_task;
+	struct tasklet_struct	rx_task;
+	struct tasklet_struct	tx_task;
+
+	struct sk_buff_head	rx_q;
+	struct sk_buff_head	raw_q;
+	struct sk_buff_head	cmd_q;
+
+	struct sk_buff		*sent_cmd;
+	struct sk_buff		*reassembly[NUM_REASSEMBLY];
+
+	struct mutex		req_lock;
+	wait_queue_head_t	req_wait_q;
+	__u32			req_status;
+	__u32			req_result;
+
+	__u16			init_last_cmd;
+
+	struct list_head	mgmt_pending;
+
+	struct inquiry_cache	inq_cache;
+	struct hci_conn_hash	conn_hash;
+	struct list_head	blacklist;
+
+	struct list_head	uuids;
+
+	struct list_head	link_keys;
+
+	struct list_head	remote_oob_data;
+
+	struct list_head	adv_entries;
+	struct timer_list	adv_timer;
+
+	struct hci_dev_stats	stat;
+
+	struct sk_buff_head	driver_init;
+
+	void			*driver_data;
+	void			*core_data;
+
+	atomic_t		promisc;
+
+	struct dentry		*debugfs;
+
+	struct device		*parent;
+	struct device		dev;
+
+	struct rfkill		*rfkill;
+
+	struct module		*owner;
+
+	int (*open)(struct hci_dev *hdev);
+	int (*close)(struct hci_dev *hdev);
+	int (*flush)(struct hci_dev *hdev);
+	int (*send)(struct sk_buff *skb);
+	void (*destruct)(struct hci_dev *hdev);
+	void (*notify)(struct hci_dev *hdev, unsigned int evt);
+	int (*ioctl)(struct hci_dev *hdev, unsigned int cmd, unsigned long arg);
+};
+
+struct hci_conn {
+	struct list_head list;
+
+	atomic_t	refcnt;
+
+	bdaddr_t	dst;
+	__u8		dst_type;
+	__u16		handle;
+	__u16		state;
+	__u8		mode;
+	__u8		type;
+	__u8		out;
+	__u8		attempt;
+	__u8		dev_class[3];
+	__u8		features[8];
+	__u8		ssp_mode;
+	__u16		interval;
+	__u16		pkt_type;
+	__u16		link_policy;
+	__u32		link_mode;
+	__u8		key_type;
+	__u8		auth_type;
+	__u8		sec_level;
+	__u8		pending_sec_level;
+	__u8		pin_length;
+	__u8		enc_key_size;
+	__u8		io_capability;
+	__u8		power_save;
+	__u16		disc_timeout;
+	unsigned long	pend;
+
+	__u8		remote_cap;
+	__u8		remote_oob;
+	__u8		remote_auth;
+
+	unsigned int	sent;
+
+	struct sk_buff_head data_q;
+	struct hci_chan_hash chan_hash;
+
+	struct timer_list disc_timer;
+	struct timer_list idle_timer;
+	struct timer_list auto_accept_timer;
+
+	struct work_struct work_add;
+	struct work_struct work_del;
+
+	struct device	dev;
+	atomic_t	devref;
+
+	struct hci_dev	*hdev;
+	void		*l2cap_data;
+	void		*sco_data;
+
+	struct hci_conn	*link;
+
+	void (*connect_cfm_cb)	(struct hci_conn *conn, u8 status);
+	void (*security_cfm_cb)	(struct hci_conn *conn, u8 status);
+	void (*disconn_cfm_cb)	(struct hci_conn *conn, u8 reason);
+};
+
+struct hci_chan {
+	struct list_head list;
+
+	struct hci_conn *conn;
+	struct sk_buff_head data_q;
+	unsigned int	sent;
+};
+
+extern struct hci_proto *hci_proto[];
+extern struct list_head hci_dev_list;
+extern struct list_head hci_cb_list;
+extern rwlock_t hci_dev_list_lock;
+extern rwlock_t hci_cb_list_lock;
+
+/* ----- Inquiry cache ----- */
+#define INQUIRY_CACHE_AGE_MAX   (HZ*30)   /* 30 seconds */
+#define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   /* 60 seconds */
+
+#define inquiry_cache_lock(c)		spin_lock(&c->lock)
+#define inquiry_cache_unlock(c)		spin_unlock(&c->lock)
+#define inquiry_cache_lock_bh(c)	spin_lock_bh(&c->lock)
+#define inquiry_cache_unlock_bh(c)	spin_unlock_bh(&c->lock)
+
+static inline void inquiry_cache_init(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	spin_lock_init(&c->lock);
+	c->list = NULL;
+}
+
+static inline int inquiry_cache_empty(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	return c->list == NULL;
+}
+
+static inline long inquiry_cache_age(struct hci_dev *hdev)
+{
+	struct inquiry_cache *c = &hdev->inq_cache;
+	return jiffies - c->timestamp;
+}
+
+static inline long inquiry_entry_age(struct inquiry_entry *e)
+{
+	return jiffies - e->timestamp;
+}
+
+struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev,
+							bdaddr_t *bdaddr);
+void hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data);
+
+/* ----- HCI Connections ----- */
+enum {
+	HCI_CONN_AUTH_PEND,
+	HCI_CONN_REAUTH_PEND,
+	HCI_CONN_ENCRYPT_PEND,
+	HCI_CONN_RSWITCH_PEND,
+	HCI_CONN_MODE_CHANGE_PEND,
+	HCI_CONN_SCO_SETUP_PEND,
+	HCI_CONN_LE_SMP_PEND,
+};
+
+static inline void hci_conn_hash_init(struct hci_dev *hdev)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	INIT_LIST_HEAD(&h->list);
+	spin_lock_init(&h->lock);
+	h->acl_num = 0;
+	h->sco_num = 0;
+}
+
+static inline void hci_conn_hash_add(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	list_add(&c->list, &h->list);
+	switch (c->type) {
+	case ACL_LINK:
+		h->acl_num++;
+		break;
+	case LE_LINK:
+		h->le_num++;
+		break;
+	case SCO_LINK:
+	case ESCO_LINK:
+		h->sco_num++;
+		break;
+	}
+}
+
+static inline void hci_conn_hash_del(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	list_del(&c->list);
+	switch (c->type) {
+	case ACL_LINK:
+		h->acl_num--;
+		break;
+	case LE_LINK:
+		h->le_num--;
+		break;
+	case SCO_LINK:
+	case ESCO_LINK:
+		h->sco_num--;
+		break;
+	}
+}
+
+static inline unsigned int hci_conn_num(struct hci_dev *hdev, __u8 type)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	switch (type) {
+	case ACL_LINK:
+		return h->acl_num;
+	case LE_LINK:
+		return h->le_num;
+	case SCO_LINK:
+	case ESCO_LINK:
+		return h->sco_num;
+	default:
+		return 0;
+	}
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_handle(struct hci_dev *hdev,
+								__u16 handle)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct list_head *p;
+	struct hci_conn  *c;
+
+	list_for_each(p, &h->list) {
+		c = list_entry(p, struct hci_conn, list);
+		if (c->handle == handle)
+			return c;
+	}
+	return NULL;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_ba(struct hci_dev *hdev,
+							__u8 type, bdaddr_t *ba)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct list_head *p;
+	struct hci_conn  *c;
+
+	list_for_each(p, &h->list) {
+		c = list_entry(p, struct hci_conn, list);
+		if (c->type == type && !bacmp(&c->dst, ba))
+			return c;
+	}
+	return NULL;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev,
+							__u8 type, __u16 state)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct list_head *p;
+	struct hci_conn  *c;
+
+	list_for_each(p, &h->list) {
+		c = list_entry(p, struct hci_conn, list);
+		if (c->type == type && c->state == state)
+			return c;
+	}
+	return NULL;
+}
+
+static inline void hci_chan_hash_init(struct hci_conn *c)
+{
+	struct hci_chan_hash *h = &c->chan_hash;
+	INIT_LIST_HEAD(&h->list);
+	spin_lock_init(&h->lock);
+	h->num = 0;
+}
+
+static inline void hci_chan_hash_add(struct hci_conn *c, struct hci_chan *chan)
+{
+	struct hci_chan_hash *h = &c->chan_hash;
+	list_add(&chan->list, &h->list);
+	h->num++;
+}
+
+static inline void hci_chan_hash_del(struct hci_conn *c, struct hci_chan *chan)
+{
+	struct hci_chan_hash *h = &c->chan_hash;
+	list_del(&chan->list);
+	h->num--;
+}
+
+void hci_acl_connect(struct hci_conn *conn);
+void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
+void hci_add_sco(struct hci_conn *conn, __u16 handle);
+void hci_setup_sync(struct hci_conn *conn, __u16 handle);
+void hci_sco_setup(struct hci_conn *conn, __u8 status);
+
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
+int hci_conn_del(struct hci_conn *conn);
+void hci_conn_hash_flush(struct hci_dev *hdev);
+void hci_conn_check_pending(struct hci_dev *hdev);
+
+struct hci_chan *hci_chan_create(struct hci_conn *conn);
+int hci_chan_del(struct hci_chan *chan);
+void hci_chan_hash_flush(struct hci_conn *conn);
+
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst,
+						__u8 sec_level, __u8 auth_type);
+int hci_conn_check_link_mode(struct hci_conn *conn);
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
+int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
+int hci_conn_change_link_key(struct hci_conn *conn);
+int hci_conn_switch_role(struct hci_conn *conn, __u8 role);
+
+void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active);
+void hci_conn_enter_sniff_mode(struct hci_conn *conn);
+
+void hci_conn_hold_device(struct hci_conn *conn);
+void hci_conn_put_device(struct hci_conn *conn);
+
+static inline void hci_conn_hold(struct hci_conn *conn)
+{
+	atomic_inc(&conn->refcnt);
+	del_timer(&conn->disc_timer);
+}
+
+static inline void hci_conn_put(struct hci_conn *conn)
+{
+	if (atomic_dec_and_test(&conn->refcnt)) {
+		unsigned long timeo;
+		if (conn->type == ACL_LINK || conn->type == LE_LINK) {
+			del_timer(&conn->idle_timer);
+			if (conn->state == BT_CONNECTED) {
+				timeo = msecs_to_jiffies(conn->disc_timeout);
+				if (!conn->out)
+					timeo *= 2;
+			} else {
+				timeo = msecs_to_jiffies(10);
+			}
+		} else {
+			timeo = msecs_to_jiffies(10);
+		}
+		mod_timer(&conn->disc_timer, jiffies + timeo);
+	}
+}
+
+/* ----- HCI Devices ----- */
+static inline void __hci_dev_put(struct hci_dev *d)
+{
+	if (atomic_dec_and_test(&d->refcnt))
+		d->destruct(d);
+}
+
+/*
+ * hci_dev_put and hci_dev_hold are macros to avoid dragging all the
+ * overhead of all the modular infrastructure into this header.
+ */
+#define hci_dev_put(d)		\
+do {				\
+	__hci_dev_put(d);	\
+	module_put(d->owner);	\
+} while (0)
+
+static inline struct hci_dev *__hci_dev_hold(struct hci_dev *d)
+{
+	atomic_inc(&d->refcnt);
+	return d;
+}
+
+#define hci_dev_hold(d)						\
+({								\
+	try_module_get(d->owner) ? __hci_dev_hold(d) : NULL;	\
+})
+
+#define hci_dev_lock(d)		spin_lock(&d->lock)
+#define hci_dev_unlock(d)	spin_unlock(&d->lock)
+#define hci_dev_lock_bh(d)	spin_lock_bh(&d->lock)
+#define hci_dev_unlock_bh(d)	spin_unlock_bh(&d->lock)
+
+struct hci_dev *hci_dev_get(int index);
+struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst);
+
+struct hci_dev *hci_alloc_dev(void);
+void hci_free_dev(struct hci_dev *hdev);
+int hci_register_dev(struct hci_dev *hdev);
+void hci_unregister_dev(struct hci_dev *hdev);
+int hci_suspend_dev(struct hci_dev *hdev);
+int hci_resume_dev(struct hci_dev *hdev);
+int hci_dev_open(__u16 dev);
+int hci_dev_close(__u16 dev);
+int hci_dev_reset(__u16 dev);
+int hci_dev_reset_stat(__u16 dev);
+int hci_dev_cmd(unsigned int cmd, void __user *arg);
+int hci_get_dev_list(void __user *arg);
+int hci_get_dev_info(void __user *arg);
+int hci_get_conn_list(void __user *arg);
+int hci_get_conn_info(struct hci_dev *hdev, void __user *arg);
+int hci_get_auth_info(struct hci_dev *hdev, void __user *arg);
+int hci_inquiry(void __user *arg);
+
+struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_blacklist_clear(struct hci_dev *hdev);
+int hci_blacklist_add(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_blacklist_del(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+int hci_uuids_clear(struct hci_dev *hdev);
+
+int hci_link_keys_clear(struct hci_dev *hdev);
+struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key,
+			bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len);
+struct link_key *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]);
+struct link_key *hci_find_link_key_type(struct hci_dev *hdev,
+					bdaddr_t *bdaddr, u8 type);
+int hci_add_ltk(struct hci_dev *hdev, int new_key, bdaddr_t *bdaddr,
+			u8 key_size, __le16 ediv, u8 rand[8], u8 ltk[16]);
+int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+int hci_remote_oob_data_clear(struct hci_dev *hdev);
+struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev,
+							bdaddr_t *bdaddr);
+int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash,
+								u8 *randomizer);
+int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+#define ADV_CLEAR_TIMEOUT (3*60*HZ) /* Three minutes */
+int hci_adv_entries_clear(struct hci_dev *hdev);
+struct adv_entry *hci_find_adv_entry(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_add_adv_entry(struct hci_dev *hdev,
+					struct hci_ev_le_advertising_info *ev);
+
+void hci_del_off_timer(struct hci_dev *hdev);
+
+void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
+
+int hci_recv_frame(struct sk_buff *skb);
+int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count);
+int hci_recv_stream_fragment(struct hci_dev *hdev, void *data, int count);
+
+void hci_init_sysfs(struct hci_dev *hdev);
+int hci_add_sysfs(struct hci_dev *hdev);
+void hci_del_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
+void hci_conn_add_sysfs(struct hci_conn *conn);
+void hci_conn_del_sysfs(struct hci_conn *conn);
+
+#define SET_HCIDEV_DEV(hdev, pdev) ((hdev)->parent = (pdev))
+
+/* ----- LMP capabilities ----- */
+#define lmp_rswitch_capable(dev)   ((dev)->features[0] & LMP_RSWITCH)
+#define lmp_encrypt_capable(dev)   ((dev)->features[0] & LMP_ENCRYPT)
+#define lmp_sniff_capable(dev)     ((dev)->features[0] & LMP_SNIFF)
+#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR)
+#define lmp_esco_capable(dev)      ((dev)->features[3] & LMP_ESCO)
+#define lmp_ssp_capable(dev)       ((dev)->features[6] & LMP_SIMPLE_PAIR)
+#define lmp_no_flush_capable(dev)  ((dev)->features[6] & LMP_NO_FLUSH)
+#define lmp_le_capable(dev)        ((dev)->features[4] & LMP_LE)
+
+/* ----- Extended LMP capabilities ----- */
+#define lmp_host_le_capable(dev)   ((dev)->extfeatures[0] & LMP_HOST_LE)
+
+/* ----- HCI protocols ----- */
+struct hci_proto {
+	char		*name;
+	unsigned int	id;
+	unsigned long	flags;
+
+	void		*priv;
+
+	int (*connect_ind)	(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								__u8 type);
+	int (*connect_cfm)	(struct hci_conn *conn, __u8 status);
+	int (*disconn_ind)	(struct hci_conn *conn);
+	int (*disconn_cfm)	(struct hci_conn *conn, __u8 reason);
+	int (*recv_acldata)	(struct hci_conn *conn, struct sk_buff *skb,
+								__u16 flags);
+	int (*recv_scodata)	(struct hci_conn *conn, struct sk_buff *skb);
+	int (*security_cfm)	(struct hci_conn *conn, __u8 status,
+								__u8 encrypt);
+};
+
+static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								__u8 type)
+{
+	register struct hci_proto *hp;
+	int mask = 0;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->connect_ind)
+		mask |= hp->connect_ind(hdev, bdaddr, type);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->connect_ind)
+		mask |= hp->connect_ind(hdev, bdaddr, type);
+
+	return mask;
+}
+
+static inline void hci_proto_connect_cfm(struct hci_conn *conn, __u8 status)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->connect_cfm)
+		hp->connect_cfm(conn, status);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->connect_cfm)
+		hp->connect_cfm(conn, status);
+
+	if (conn->connect_cfm_cb)
+		conn->connect_cfm_cb(conn, status);
+}
+
+static inline int hci_proto_disconn_ind(struct hci_conn *conn)
+{
+	register struct hci_proto *hp;
+	int reason = HCI_ERROR_REMOTE_USER_TERM;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->disconn_ind)
+		reason = hp->disconn_ind(conn);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->disconn_ind)
+		reason = hp->disconn_ind(conn);
+
+	return reason;
+}
+
+static inline void hci_proto_disconn_cfm(struct hci_conn *conn, __u8 reason)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->disconn_cfm)
+		hp->disconn_cfm(conn, reason);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->disconn_cfm)
+		hp->disconn_cfm(conn, reason);
+
+	if (conn->disconn_cfm_cb)
+		conn->disconn_cfm_cb(conn, reason);
+}
+
+static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	register struct hci_proto *hp;
+	__u8 encrypt;
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
+}
+
+static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status,
+								__u8 encrypt)
+{
+	register struct hci_proto *hp;
+
+	hp = hci_proto[HCI_PROTO_L2CAP];
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
+
+	hp = hci_proto[HCI_PROTO_SCO];
+	if (hp && hp->security_cfm)
+		hp->security_cfm(conn, status, encrypt);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
+}
+
+int hci_register_proto(struct hci_proto *hproto);
+int hci_unregister_proto(struct hci_proto *hproto);
+
+/* ----- HCI callbacks ----- */
+struct hci_cb {
+	struct list_head list;
+
+	char *name;
+
+	void (*security_cfm)	(struct hci_conn *conn, __u8 status,
+								__u8 encrypt);
+	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
+	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
+};
+
+static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+	__u8 encrypt;
+
+	hci_proto_auth_cfm(conn, status);
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status,
+								__u8 encrypt)
+{
+	struct list_head *p;
+
+	if (conn->sec_level == BT_SECURITY_SDP)
+		conn->sec_level = BT_SECURITY_LOW;
+
+	if (conn->pending_sec_level > conn->sec_level)
+		conn->sec_level = conn->pending_sec_level;
+
+	hci_proto_encrypt_cfm(conn, status, encrypt);
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->key_change_cfm)
+			cb->key_change_cfm(conn, status);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status,
+								__u8 role)
+{
+	struct list_head *p;
+
+	read_lock_bh(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->role_switch_cfm)
+			cb->role_switch_cfm(conn, status, role);
+	}
+	read_unlock_bh(&hci_cb_list_lock);
+}
+
+int hci_register_cb(struct hci_cb *hcb);
+int hci_unregister_cb(struct hci_cb *hcb);
+
+int hci_register_notifier(struct notifier_block *nb);
+int hci_unregister_notifier(struct notifier_block *nb);
+
+int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen, void *param);
+void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags);
+void hci_send_sco(struct hci_conn *conn, struct sk_buff *skb);
+
+void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode);
+
+void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data);
+
+/* ----- HCI Sockets ----- */
+void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb,
+							struct sock *skip_sk);
+
+/* Management interface */
+int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len);
+int mgmt_index_added(struct hci_dev *hdev);
+int mgmt_index_removed(struct hci_dev *hdev);
+int mgmt_powered(struct hci_dev *hdev, u8 powered);
+int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable);
+int mgmt_connectable(struct hci_dev *hdev, u8 connectable);
+int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status);
+int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key,
+								u8 persistent);
+int mgmt_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+int mgmt_disconnected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+int mgmt_disconnect_failed(struct hci_dev *hdev);
+int mgmt_connect_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type,
+								u8 status);
+int mgmt_pin_code_request(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 secure);
+int mgmt_pin_code_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								u8 status);
+int mgmt_pin_code_neg_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								u8 status);
+int mgmt_user_confirm_request(struct hci_dev *hdev, bdaddr_t *bdaddr,
+						__le32 value, u8 confirm_hint);
+int mgmt_user_confirm_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								u8 status);
+int mgmt_user_confirm_neg_reply_complete(struct hci_dev *hdev,
+						bdaddr_t *bdaddr, u8 status);
+int mgmt_auth_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 status);
+int mgmt_set_local_name_complete(struct hci_dev *hdev, u8 *name, u8 status);
+int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash,
+						u8 *randomizer, u8 status);
+int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type,
+					u8 *dev_class, s8 rssi, u8 *eir);
+int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *name);
+int mgmt_inquiry_failed(struct hci_dev *hdev, u8 status);
+int mgmt_discovering(struct hci_dev *hdev, u8 discovering);
+int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+/* HCI info for socket */
+#define hci_pi(sk) ((struct hci_pinfo *) sk)
+
+struct hci_pinfo {
+	struct bt_sock    bt;
+	struct hci_dev    *hdev;
+	struct hci_filter filter;
+	__u32             cmsg_mask;
+	unsigned short   channel;
+};
+
+/* HCI security filter */
+#define HCI_SFLT_MAX_OGF  5
+
+struct hci_sec_filter {
+	__u32 type_mask;
+	__u32 event_mask[2];
+	__u32 ocf_mask[HCI_SFLT_MAX_OGF + 1][4];
+};
+
+/* ----- HCI requests ----- */
+#define HCI_REQ_DONE	  0
+#define HCI_REQ_PEND	  1
+#define HCI_REQ_CANCELED  2
+
+#define hci_req_lock(d)		mutex_lock(&d->req_lock)
+#define hci_req_unlock(d)	mutex_unlock(&d->req_lock)
+
+void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result);
+
+void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max,
+					u16 latency, u16 to_multiplier);
+void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8],
+							__u8 ltk[16]);
+void hci_le_ltk_reply(struct hci_conn *conn, u8 ltk[16]);
+void hci_le_ltk_neg_reply(struct hci_conn *conn);
+
+int hci_do_inquiry(struct hci_dev *hdev, u8 length);
+int hci_cancel_inquiry(struct hci_dev *hdev);
+
+#endif /* __HCI_CORE_H */
diff --git a/include/compat/net/bluetooth/l2cap.h b/include/compat/net/bluetooth/l2cap.h
new file mode 100755
index 0000000..875021a
--- /dev/null
+++ b/include/compat/net/bluetooth/l2cap.h
@@ -0,0 +1,814 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+   Copyright (C) 2009-2010 Gustavo F. Padovan <gustavo@padovan.org>
+   Copyright (C) 2010 Google Inc.
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __L2CAP_H
+#define __L2CAP_H
+
+#include <asm/unaligned.h>
+
+/* L2CAP defaults */
+#define L2CAP_DEFAULT_MTU		672
+#define L2CAP_DEFAULT_MIN_MTU		48
+#define L2CAP_DEFAULT_FLUSH_TO		0xffff
+#define L2CAP_DEFAULT_TX_WINDOW		63
+#define L2CAP_DEFAULT_EXT_WINDOW	0x3FFF
+#define L2CAP_DEFAULT_MAX_TX		3
+#define L2CAP_DEFAULT_RETRANS_TO	2000    /* 2 seconds */
+#define L2CAP_DEFAULT_MONITOR_TO	12000   /* 12 seconds */
+#define L2CAP_DEFAULT_MAX_PDU_SIZE	1009    /* Sized for 3-DH5 packet */
+#define L2CAP_DEFAULT_ACK_TO		200
+#define L2CAP_LE_DEFAULT_MTU		23
+#define L2CAP_DEFAULT_MAX_SDU_SIZE	0xFFFF
+#define L2CAP_DEFAULT_SDU_ITIME		0xFFFFFFFF
+#define L2CAP_DEFAULT_ACC_LAT		0xFFFFFFFF
+
+#define L2CAP_DISC_TIMEOUT             (100)
+#define L2CAP_DISC_REJ_TIMEOUT         (5000)  /*  5 seconds */
+#define L2CAP_ENC_TIMEOUT              (5000)  /*  5 seconds */
+#define L2CAP_CONN_TIMEOUT             (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT             (4000)  /*  4 seconds */
+
+/* L2CAP socket address */
+struct sockaddr_l2 {
+	sa_family_t	l2_family;
+	__le16		l2_psm;
+	bdaddr_t	l2_bdaddr;
+	__le16		l2_cid;
+};
+
+/* L2CAP socket options */
+#define L2CAP_OPTIONS	0x01
+struct l2cap_options {
+	__u16 omtu;
+	__u16 imtu;
+	__u16 flush_to;
+	__u8  mode;
+	__u8  fcs;
+	__u8  max_tx;
+	__u16 txwin_size;
+};
+
+#define L2CAP_CONNINFO	0x02
+struct l2cap_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define L2CAP_LM	0x03
+#define L2CAP_LM_MASTER		0x0001
+#define L2CAP_LM_AUTH		0x0002
+#define L2CAP_LM_ENCRYPT	0x0004
+#define L2CAP_LM_TRUSTED	0x0008
+#define L2CAP_LM_RELIABLE	0x0010
+#define L2CAP_LM_SECURE		0x0020
+
+/* L2CAP command codes */
+#define L2CAP_COMMAND_REJ	0x01
+#define L2CAP_CONN_REQ		0x02
+#define L2CAP_CONN_RSP		0x03
+#define L2CAP_CONF_REQ		0x04
+#define L2CAP_CONF_RSP		0x05
+#define L2CAP_DISCONN_REQ	0x06
+#define L2CAP_DISCONN_RSP	0x07
+#define L2CAP_ECHO_REQ		0x08
+#define L2CAP_ECHO_RSP		0x09
+#define L2CAP_INFO_REQ		0x0a
+#define L2CAP_INFO_RSP		0x0b
+#define L2CAP_CREATE_CHAN_REQ	0x0c
+#define L2CAP_CREATE_CHAN_RSP	0x0d
+#define L2CAP_MOVE_CHAN_REQ	0x0e
+#define L2CAP_MOVE_CHAN_RSP	0x0f
+#define L2CAP_MOVE_CHAN_CFM	0x10
+#define L2CAP_MOVE_CHAN_CFM_RSP	0x11
+#define L2CAP_CONN_PARAM_UPDATE_REQ	0x12
+#define L2CAP_CONN_PARAM_UPDATE_RSP	0x13
+
+/* L2CAP extended feature mask */
+#define L2CAP_FEAT_FLOWCTL	0x00000001
+#define L2CAP_FEAT_RETRANS	0x00000002
+#define L2CAP_FEAT_BIDIR_QOS	0x00000004
+#define L2CAP_FEAT_ERTM		0x00000008
+#define L2CAP_FEAT_STREAMING	0x00000010
+#define L2CAP_FEAT_FCS		0x00000020
+#define L2CAP_FEAT_EXT_FLOW	0x00000040
+#define L2CAP_FEAT_FIXED_CHAN	0x00000080
+#define L2CAP_FEAT_EXT_WINDOW	0x00000100
+#define L2CAP_FEAT_UCD		0x00000200
+
+/* L2CAP checksum option */
+#define L2CAP_FCS_NONE		0x00
+#define L2CAP_FCS_CRC16		0x01
+
+/* L2CAP fixed channels */
+#define L2CAP_FC_L2CAP		0x02
+#define L2CAP_FC_A2MP		0x08
+
+/* L2CAP Control Field bit masks */
+#define L2CAP_CTRL_SAR			0xC000
+#define L2CAP_CTRL_REQSEQ		0x3F00
+#define L2CAP_CTRL_TXSEQ		0x007E
+#define L2CAP_CTRL_SUPERVISE		0x000C
+
+#define L2CAP_CTRL_RETRANS		0x0080
+#define L2CAP_CTRL_FINAL		0x0080
+#define L2CAP_CTRL_POLL			0x0010
+#define L2CAP_CTRL_FRAME_TYPE		0x0001 /* I- or S-Frame */
+
+#define L2CAP_CTRL_TXSEQ_SHIFT		1
+#define L2CAP_CTRL_SUPER_SHIFT		2
+#define L2CAP_CTRL_REQSEQ_SHIFT		8
+#define L2CAP_CTRL_SAR_SHIFT		14
+
+/* L2CAP Extended Control Field bit mask */
+#define L2CAP_EXT_CTRL_TXSEQ		0xFFFC0000
+#define L2CAP_EXT_CTRL_SAR		0x00030000
+#define L2CAP_EXT_CTRL_SUPERVISE	0x00030000
+#define L2CAP_EXT_CTRL_REQSEQ		0x0000FFFC
+
+#define L2CAP_EXT_CTRL_POLL		0x00040000
+#define L2CAP_EXT_CTRL_FINAL		0x00000002
+#define L2CAP_EXT_CTRL_FRAME_TYPE	0x00000001 /* I- or S-Frame */
+
+#define L2CAP_EXT_CTRL_REQSEQ_SHIFT	2
+#define L2CAP_EXT_CTRL_SAR_SHIFT	16
+#define L2CAP_EXT_CTRL_SUPER_SHIFT	16
+#define L2CAP_EXT_CTRL_TXSEQ_SHIFT	18
+
+/* L2CAP Supervisory Function */
+#define L2CAP_SUPER_RR		0x00
+#define L2CAP_SUPER_REJ		0x01
+#define L2CAP_SUPER_RNR		0x02
+#define L2CAP_SUPER_SREJ	0x03
+
+/* L2CAP Segmentation and Reassembly */
+#define L2CAP_SAR_UNSEGMENTED	0x00
+#define L2CAP_SAR_START		0x01
+#define L2CAP_SAR_END		0x02
+#define L2CAP_SAR_CONTINUE	0x03
+
+/* L2CAP Command rej. reasons */
+#define L2CAP_REJ_NOT_UNDERSTOOD	0x0000
+#define L2CAP_REJ_MTU_EXCEEDED		0x0001
+#define L2CAP_REJ_INVALID_CID		0x0002
+
+/* L2CAP structures */
+struct l2cap_hdr {
+	__le16     len;
+	__le16     cid;
+} __packed;
+#define L2CAP_HDR_SIZE		4
+#define L2CAP_ENH_HDR_SIZE	6
+#define L2CAP_EXT_HDR_SIZE	8
+
+#define L2CAP_FCS_SIZE		2
+#define L2CAP_SDULEN_SIZE	2
+#define L2CAP_PSMLEN_SIZE	2
+
+struct l2cap_cmd_hdr {
+	__u8       code;
+	__u8       ident;
+	__le16     len;
+} __packed;
+#define L2CAP_CMD_HDR_SIZE	4
+
+struct l2cap_cmd_rej_unk {
+	__le16     reason;
+} __packed;
+
+struct l2cap_cmd_rej_mtu {
+	__le16     reason;
+	__le16     max_mtu;
+} __packed;
+
+struct l2cap_cmd_rej_cid {
+	__le16     reason;
+	__le16     scid;
+	__le16     dcid;
+} __packed;
+
+struct l2cap_conn_req {
+	__le16     psm;
+	__le16     scid;
+} __packed;
+
+struct l2cap_conn_rsp {
+	__le16     dcid;
+	__le16     scid;
+	__le16     result;
+	__le16     status;
+} __packed;
+
+/* channel indentifier */
+#define L2CAP_CID_SIGNALING	0x0001
+#define L2CAP_CID_CONN_LESS	0x0002
+#define L2CAP_CID_LE_DATA	0x0004
+#define L2CAP_CID_LE_SIGNALING	0x0005
+#define L2CAP_CID_SMP		0x0006
+#define L2CAP_CID_DYN_START	0x0040
+#define L2CAP_CID_DYN_END	0xffff
+
+/* connect/create channel results */
+#define L2CAP_CR_SUCCESS	0x0000
+#define L2CAP_CR_PEND		0x0001
+#define L2CAP_CR_BAD_PSM	0x0002
+#define L2CAP_CR_SEC_BLOCK	0x0003
+#define L2CAP_CR_NO_MEM		0x0004
+#define L2CAP_CR_BAD_AMP	0x0005
+
+/* connect/create channel status */
+#define L2CAP_CS_NO_INFO	0x0000
+#define L2CAP_CS_AUTHEN_PEND	0x0001
+#define L2CAP_CS_AUTHOR_PEND	0x0002
+
+struct l2cap_conf_req {
+	__le16     dcid;
+	__le16     flags;
+	__u8       data[0];
+} __packed;
+
+struct l2cap_conf_rsp {
+	__le16     scid;
+	__le16     flags;
+	__le16     result;
+	__u8       data[0];
+} __packed;
+
+#define L2CAP_CONF_SUCCESS	0x0000
+#define L2CAP_CONF_UNACCEPT	0x0001
+#define L2CAP_CONF_REJECT	0x0002
+#define L2CAP_CONF_UNKNOWN	0x0003
+#define L2CAP_CONF_PENDING	0x0004
+#define L2CAP_CONF_EFS_REJECT	0x0005
+
+struct l2cap_conf_opt {
+	__u8       type;
+	__u8       len;
+	__u8       val[0];
+} __packed;
+#define L2CAP_CONF_OPT_SIZE	2
+
+#define L2CAP_CONF_HINT		0x80
+#define L2CAP_CONF_MASK		0x7f
+
+#define L2CAP_CONF_MTU		0x01
+#define L2CAP_CONF_FLUSH_TO	0x02
+#define L2CAP_CONF_QOS		0x03
+#define L2CAP_CONF_RFC		0x04
+#define L2CAP_CONF_FCS		0x05
+#define L2CAP_CONF_EFS		0x06
+#define L2CAP_CONF_EWS		0x07
+
+#define L2CAP_CONF_MAX_SIZE	22
+
+struct l2cap_conf_rfc {
+	__u8       mode;
+	__u8       txwin_size;
+	__u8       max_transmit;
+	__le16     retrans_timeout;
+	__le16     monitor_timeout;
+	__le16     max_pdu_size;
+} __packed;
+
+#define L2CAP_MODE_BASIC	0x00
+#define L2CAP_MODE_RETRANS	0x01
+#define L2CAP_MODE_FLOWCTL	0x02
+#define L2CAP_MODE_ERTM		0x03
+#define L2CAP_MODE_STREAMING	0x04
+
+struct l2cap_conf_efs {
+	__u8	id;
+	__u8	stype;
+	__le16	msdu;
+	__le32	sdu_itime;
+	__le32	acc_lat;
+	__le32	flush_to;
+} __packed;
+
+#define L2CAP_SERV_NOTRAFIC	0x00
+#define L2CAP_SERV_BESTEFFORT	0x01
+#define L2CAP_SERV_GUARANTEED	0x02
+
+#define L2CAP_BESTEFFORT_ID	0x01
+
+struct l2cap_disconn_req {
+	__le16     dcid;
+	__le16     scid;
+} __packed;
+
+struct l2cap_disconn_rsp {
+	__le16     dcid;
+	__le16     scid;
+} __packed;
+
+struct l2cap_info_req {
+	__le16      type;
+} __packed;
+
+struct l2cap_info_rsp {
+	__le16      type;
+	__le16      result;
+	__u8        data[0];
+} __packed;
+
+struct l2cap_create_chan_req {
+	__le16      psm;
+	__le16      scid;
+	__u8        amp_id;
+} __packed;
+
+struct l2cap_create_chan_rsp {
+	__le16      dcid;
+	__le16      scid;
+	__le16      result;
+	__le16      status;
+} __packed;
+
+struct l2cap_move_chan_req {
+	__le16      icid;
+	__u8        dest_amp_id;
+} __packed;
+
+struct l2cap_move_chan_rsp {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MR_SUCCESS	0x0000
+#define L2CAP_MR_PEND		0x0001
+#define L2CAP_MR_BAD_ID		0x0002
+#define L2CAP_MR_SAME_ID	0x0003
+#define L2CAP_MR_NOT_SUPP	0x0004
+#define L2CAP_MR_COLLISION	0x0005
+#define L2CAP_MR_NOT_ALLOWED	0x0006
+
+struct l2cap_move_chan_cfm {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MC_CONFIRMED	0x0000
+#define L2CAP_MC_UNCONFIRMED	0x0001
+
+struct l2cap_move_chan_cfm_rsp {
+	__le16      icid;
+} __packed;
+
+/* info type */
+#define L2CAP_IT_CL_MTU		0x0001
+#define L2CAP_IT_FEAT_MASK	0x0002
+#define L2CAP_IT_FIXED_CHAN	0x0003
+
+/* info result */
+#define L2CAP_IR_SUCCESS	0x0000
+#define L2CAP_IR_NOTSUPP	0x0001
+
+struct l2cap_conn_param_update_req {
+	__le16      min;
+	__le16      max;
+	__le16      latency;
+	__le16      to_multiplier;
+} __packed;
+
+struct l2cap_conn_param_update_rsp {
+	__le16      result;
+} __packed;
+
+/* Connection Parameters result */
+#define L2CAP_CONN_PARAM_ACCEPTED	0x0000
+#define L2CAP_CONN_PARAM_REJECTED	0x0001
+
+/* ----- L2CAP channels and connections ----- */
+struct srej_list {
+	__u16	tx_seq;
+	struct list_head list;
+};
+
+struct l2cap_chan {
+	struct sock *sk;
+
+	struct l2cap_conn	*conn;
+
+	__u8		state;
+
+	atomic_t	refcnt;
+
+	__le16		psm;
+	__u16		dcid;
+	__u16		scid;
+
+	__u16		imtu;
+	__u16		omtu;
+	__u16		flush_to;
+	__u8		mode;
+	__u8		chan_type;
+	__u8		chan_policy;
+
+	__le16		sport;
+
+	__u8		sec_level;
+
+	__u8		ident;
+
+	__u8		conf_req[64];
+	__u8		conf_len;
+	__u8		num_conf_req;
+	__u8		num_conf_rsp;
+
+	__u8		fcs;
+
+	__u16		tx_win;
+	__u16		tx_win_max;
+	__u8		max_tx;
+	__u16		retrans_timeout;
+	__u16		monitor_timeout;
+	__u16		mps;
+
+	unsigned long	conf_state;
+	unsigned long	conn_state;
+	unsigned long	flags;
+
+	__u16		next_tx_seq;
+	__u16		expected_ack_seq;
+	__u16		expected_tx_seq;
+	__u16		buffer_seq;
+	__u16		buffer_seq_srej;
+	__u16		srej_save_reqseq;
+	__u16		frames_sent;
+	__u16		unacked_frames;
+	__u8		retry_count;
+	__u8		num_acked;
+	__u16		sdu_len;
+	struct sk_buff	*sdu;
+	struct sk_buff	*sdu_last_frag;
+
+	__u16		remote_tx_win;
+	__u8		remote_max_tx;
+	__u16		remote_mps;
+
+	__u8		local_id;
+	__u8		local_stype;
+	__u16		local_msdu;
+	__u32		local_sdu_itime;
+	__u32		local_acc_lat;
+	__u32		local_flush_to;
+
+	__u8		remote_id;
+	__u8		remote_stype;
+	__u16		remote_msdu;
+	__u32		remote_sdu_itime;
+	__u32		remote_acc_lat;
+	__u32		remote_flush_to;
+
+	struct timer_list	chan_timer;
+	struct timer_list	retrans_timer;
+	struct timer_list	monitor_timer;
+	struct timer_list	ack_timer;
+	struct sk_buff		*tx_send_head;
+	struct sk_buff_head	tx_q;
+	struct sk_buff_head	srej_q;
+	struct list_head	srej_l;
+
+	struct list_head list;
+	struct list_head global_l;
+
+	void		*data;
+	struct l2cap_ops *ops;
+};
+
+struct l2cap_ops {
+	char		*name;
+
+	struct l2cap_chan	*(*new_connection) (void *data);
+	int			(*recv) (void *data, struct sk_buff *skb);
+	void			(*close) (void *data);
+	void			(*state_change) (void *data, int state);
+};
+
+struct l2cap_conn {
+	struct hci_conn	*hcon;
+	struct hci_chan	*hchan;
+
+	bdaddr_t	*dst;
+	bdaddr_t	*src;
+
+	unsigned int	mtu;
+
+	__u32		feat_mask;
+
+	__u8		info_state;
+	__u8		info_ident;
+
+	struct timer_list info_timer;
+
+	spinlock_t	lock;
+
+	struct sk_buff *rx_skb;
+	__u32		rx_len;
+	__u8		tx_ident;
+
+	__u8		disc_reason;
+
+	struct timer_list security_timer;
+	struct smp_chan *smp_chan;
+
+	struct list_head chan_l;
+	rwlock_t	chan_lock;
+};
+
+#define L2CAP_INFO_CL_MTU_REQ_SENT	0x01
+#define L2CAP_INFO_FEAT_MASK_REQ_SENT	0x04
+#define L2CAP_INFO_FEAT_MASK_REQ_DONE	0x08
+
+#define L2CAP_CHAN_RAW			1
+#define L2CAP_CHAN_CONN_LESS		2
+#define L2CAP_CHAN_CONN_ORIENTED	3
+
+/* ----- L2CAP socket info ----- */
+#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
+
+struct l2cap_pinfo {
+	struct bt_sock	bt;
+	struct l2cap_chan	*chan;
+	struct sk_buff	*rx_busy_skb;
+};
+
+enum {
+	CONF_REQ_SENT,
+	CONF_INPUT_DONE,
+	CONF_OUTPUT_DONE,
+	CONF_MTU_DONE,
+	CONF_MODE_DONE,
+	CONF_CONNECT_PEND,
+	CONF_NO_FCS_RECV,
+	CONF_STATE2_DEVICE,
+	CONF_EWS_RECV,
+	CONF_LOC_CONF_PEND,
+	CONF_REM_CONF_PEND,
+};
+
+#define L2CAP_CONF_MAX_CONF_REQ 2
+#define L2CAP_CONF_MAX_CONF_RSP 2
+
+enum {
+	CONN_SREJ_SENT,
+	CONN_WAIT_F,
+	CONN_SREJ_ACT,
+	CONN_SEND_PBIT,
+	CONN_REMOTE_BUSY,
+	CONN_LOCAL_BUSY,
+	CONN_REJ_ACT,
+	CONN_SEND_FBIT,
+	CONN_RNR_SENT,
+};
+
+/* Definitions for flags in l2cap_chan */
+enum {
+	FLAG_ROLE_SWITCH,
+	FLAG_FORCE_ACTIVE,
+	FLAG_FORCE_RELIABLE,
+	FLAG_FLUSHABLE,
+	FLAG_EXT_CTRL,
+	FLAG_EFS_ENABLE,
+};
+
+#define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
+#define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer)
+#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \
+		L2CAP_DEFAULT_RETRANS_TO);
+#define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer)
+#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \
+		L2CAP_DEFAULT_MONITOR_TO);
+#define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer)
+#define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \
+		L2CAP_DEFAULT_ACK_TO);
+#define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer)
+
+static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2)
+{
+	int offset;
+
+	offset = (seq1 - seq2) % (chan->tx_win_max + 1);
+	if (offset < 0)
+		offset += (chan->tx_win_max + 1);
+
+	return offset;
+}
+
+static inline __u16 __next_seq(struct l2cap_chan *chan, __u16 seq)
+{
+	return (seq + 1) % (chan->tx_win_max + 1);
+}
+
+static inline int l2cap_tx_window_full(struct l2cap_chan *ch)
+{
+	int sub;
+
+	sub = (ch->next_tx_seq - ch->expected_ack_seq) % 64;
+
+	if (sub < 0)
+		sub += 64;
+
+	return sub == ch->remote_tx_win;
+}
+
+static inline __u16 __get_reqseq(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_REQSEQ) >>
+						L2CAP_EXT_CTRL_REQSEQ_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_REQSEQ) >> L2CAP_CTRL_REQSEQ_SHIFT;
+}
+
+static inline __u32 __set_reqseq(struct l2cap_chan *chan, __u32 reqseq)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (reqseq << L2CAP_EXT_CTRL_REQSEQ_SHIFT) &
+							L2CAP_EXT_CTRL_REQSEQ;
+	else
+		return (reqseq << L2CAP_CTRL_REQSEQ_SHIFT) & L2CAP_CTRL_REQSEQ;
+}
+
+static inline __u16 __get_txseq(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_TXSEQ) >>
+						L2CAP_EXT_CTRL_TXSEQ_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_TXSEQ) >> L2CAP_CTRL_TXSEQ_SHIFT;
+}
+
+static inline __u32 __set_txseq(struct l2cap_chan *chan, __u32 txseq)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (txseq << L2CAP_EXT_CTRL_TXSEQ_SHIFT) &
+							L2CAP_EXT_CTRL_TXSEQ;
+	else
+		return (txseq << L2CAP_CTRL_TXSEQ_SHIFT) & L2CAP_CTRL_TXSEQ;
+}
+
+static inline bool __is_sframe(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_FRAME_TYPE;
+	else
+		return ctrl & L2CAP_CTRL_FRAME_TYPE;
+}
+
+static inline __u32 __set_sframe(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_FRAME_TYPE;
+	else
+		return L2CAP_CTRL_FRAME_TYPE;
+}
+
+static inline __u8 __get_ctrl_sar(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_SAR) >> L2CAP_EXT_CTRL_SAR_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_SAR) >> L2CAP_CTRL_SAR_SHIFT;
+}
+
+static inline __u32 __set_ctrl_sar(struct l2cap_chan *chan, __u32 sar)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (sar << L2CAP_EXT_CTRL_SAR_SHIFT) & L2CAP_EXT_CTRL_SAR;
+	else
+		return (sar << L2CAP_CTRL_SAR_SHIFT) & L2CAP_CTRL_SAR;
+}
+
+static inline bool __is_sar_start(struct l2cap_chan *chan, __u32 ctrl)
+{
+	return __get_ctrl_sar(chan, ctrl) == L2CAP_SAR_START;
+}
+
+static inline __u32 __get_sar_mask(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_SAR;
+	else
+		return L2CAP_CTRL_SAR;
+}
+
+static inline __u8 __get_ctrl_super(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_SUPERVISE) >>
+						L2CAP_EXT_CTRL_SUPER_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_SUPERVISE) >> L2CAP_CTRL_SUPER_SHIFT;
+}
+
+static inline __u32 __set_ctrl_super(struct l2cap_chan *chan, __u32 super)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (super << L2CAP_EXT_CTRL_SUPER_SHIFT) &
+						L2CAP_EXT_CTRL_SUPERVISE;
+	else
+		return (super << L2CAP_CTRL_SUPER_SHIFT) &
+							L2CAP_CTRL_SUPERVISE;
+}
+
+static inline __u32 __set_ctrl_final(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_FINAL;
+	else
+		return L2CAP_CTRL_FINAL;
+}
+
+static inline bool __is_ctrl_final(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_FINAL;
+	else
+		return ctrl & L2CAP_CTRL_FINAL;
+}
+
+static inline __u32 __set_ctrl_poll(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_POLL;
+	else
+		return L2CAP_CTRL_POLL;
+}
+
+static inline bool __is_ctrl_poll(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_POLL;
+	else
+		return ctrl & L2CAP_CTRL_POLL;
+}
+
+static inline __u32 __get_control(struct l2cap_chan *chan, void *p)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return get_unaligned_le32(p);
+	else
+		return get_unaligned_le16(p);
+}
+
+static inline void __put_control(struct l2cap_chan *chan, __u32 control,
+								void *p)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return put_unaligned_le32(control, p);
+	else
+		return put_unaligned_le16(control, p);
+}
+
+static inline __u8 __ctrl_size(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_HDR_SIZE - L2CAP_HDR_SIZE;
+	else
+		return L2CAP_ENH_HDR_SIZE - L2CAP_HDR_SIZE;
+}
+
+extern int disable_ertm;
+extern int enable_hs;
+
+int l2cap_init_sockets(void);
+void l2cap_cleanup_sockets(void);
+
+void __l2cap_connect_rsp_defer(struct l2cap_chan *chan);
+int __l2cap_wait_ack(struct sock *sk);
+
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm);
+int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid);
+
+struct l2cap_chan *l2cap_chan_create(struct sock *sk);
+void l2cap_chan_close(struct l2cap_chan *chan, int reason);
+void l2cap_chan_destroy(struct l2cap_chan *chan);
+int l2cap_chan_connect(struct l2cap_chan *chan);
+int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
+								u32 priority);
+void l2cap_chan_busy(struct l2cap_chan *chan, int busy);
+
+#endif /* __L2CAP_H */
diff --git a/include/compat/net/bluetooth/mgmt.h b/include/compat/net/bluetooth/mgmt.h
new file mode 100755
index 0000000..3e320c9
--- /dev/null
+++ b/include/compat/net/bluetooth/mgmt.h
@@ -0,0 +1,324 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+
+   Copyright (C) 2010  Nokia Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#define MGMT_INDEX_NONE			0xFFFF
+
+struct mgmt_hdr {
+	__le16 opcode;
+	__le16 index;
+	__le16 len;
+} __packed;
+
+#define MGMT_OP_READ_VERSION		0x0001
+struct mgmt_rp_read_version {
+	__u8 version;
+	__le16 revision;
+} __packed;
+
+#define MGMT_OP_READ_INDEX_LIST		0x0003
+struct mgmt_rp_read_index_list {
+	__le16 num_controllers;
+	__le16 index[0];
+} __packed;
+
+/* Reserve one extra byte for names in management messages so that they
+ * are always guaranteed to be nul-terminated */
+#define MGMT_MAX_NAME_LENGTH		(HCI_MAX_NAME_LENGTH + 1)
+
+#define MGMT_OP_READ_INFO		0x0004
+struct mgmt_rp_read_info {
+	__u8 type;
+	__u8 powered;
+	__u8 connectable;
+	__u8 discoverable;
+	__u8 pairable;
+	__u8 sec_mode;
+	bdaddr_t bdaddr;
+	__u8 dev_class[3];
+	__u8 features[8];
+	__u16 manufacturer;
+	__u8 hci_ver;
+	__u16 hci_rev;
+	__u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+struct mgmt_mode {
+	__u8 val;
+} __packed;
+
+#define MGMT_OP_SET_POWERED		0x0005
+
+#define MGMT_OP_SET_DISCOVERABLE	0x0006
+struct mgmt_cp_set_discoverable {
+	__u8 val;
+	__u16 timeout;
+} __packed;
+
+#define MGMT_OP_SET_CONNECTABLE		0x0007
+
+#define MGMT_OP_SET_PAIRABLE		0x0008
+
+#define MGMT_OP_ADD_UUID		0x0009
+struct mgmt_cp_add_uuid {
+	__u8 uuid[16];
+	__u8 svc_hint;
+} __packed;
+
+#define MGMT_OP_REMOVE_UUID		0x000A
+struct mgmt_cp_remove_uuid {
+	__u8 uuid[16];
+} __packed;
+
+#define MGMT_OP_SET_DEV_CLASS		0x000B
+struct mgmt_cp_set_dev_class {
+	__u8 major;
+	__u8 minor;
+} __packed;
+
+#define MGMT_OP_SET_SERVICE_CACHE	0x000C
+struct mgmt_cp_set_service_cache {
+	__u8 enable;
+} __packed;
+
+struct mgmt_link_key_info {
+	bdaddr_t bdaddr;
+	u8 type;
+	u8 val[16];
+	u8 pin_len;
+} __packed;
+
+#define MGMT_OP_LOAD_LINK_KEYS		0x000D
+struct mgmt_cp_load_link_keys {
+	__u8 debug_keys;
+	__le16 key_count;
+	struct mgmt_link_key_info keys[0];
+} __packed;
+
+#define MGMT_OP_REMOVE_KEYS		0x000E
+struct mgmt_cp_remove_keys {
+	bdaddr_t bdaddr;
+	__u8 disconnect;
+} __packed;
+
+#define MGMT_OP_DISCONNECT		0x000F
+struct mgmt_cp_disconnect {
+	bdaddr_t bdaddr;
+} __packed;
+struct mgmt_rp_disconnect {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_ADDR_BREDR			0x00
+#define MGMT_ADDR_LE			0x01
+#define MGMT_ADDR_BREDR_LE		0x02
+#define MGMT_ADDR_INVALID		0xff
+
+struct mgmt_addr_info {
+	bdaddr_t bdaddr;
+	__u8 type;
+} __packed;
+
+#define MGMT_OP_GET_CONNECTIONS		0x0010
+struct mgmt_rp_get_connections {
+	__le16 conn_count;
+	struct mgmt_addr_info addr[0];
+} __packed;
+
+#define MGMT_OP_PIN_CODE_REPLY		0x0011
+struct mgmt_cp_pin_code_reply {
+	bdaddr_t bdaddr;
+	__u8 pin_len;
+	__u8 pin_code[16];
+} __packed;
+struct mgmt_rp_pin_code_reply {
+	bdaddr_t bdaddr;
+	uint8_t status;
+} __packed;
+
+#define MGMT_OP_PIN_CODE_NEG_REPLY	0x0012
+struct mgmt_cp_pin_code_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_OP_SET_IO_CAPABILITY	0x0013
+struct mgmt_cp_set_io_capability {
+	__u8 io_capability;
+} __packed;
+
+#define MGMT_OP_PAIR_DEVICE		0x0014
+struct mgmt_cp_pair_device {
+	bdaddr_t bdaddr;
+	__u8 io_cap;
+} __packed;
+struct mgmt_rp_pair_device {
+	bdaddr_t bdaddr;
+	__u8 status;
+} __packed;
+
+#define MGMT_OP_USER_CONFIRM_REPLY	0x0015
+struct mgmt_cp_user_confirm_reply {
+	bdaddr_t bdaddr;
+} __packed;
+struct mgmt_rp_user_confirm_reply {
+	bdaddr_t bdaddr;
+	__u8 status;
+} __packed;
+
+#define MGMT_OP_USER_CONFIRM_NEG_REPLY	0x0016
+
+#define MGMT_OP_SET_LOCAL_NAME		0x0017
+struct mgmt_cp_set_local_name {
+	__u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_OP_READ_LOCAL_OOB_DATA	0x0018
+struct mgmt_rp_read_local_oob_data {
+	__u8 hash[16];
+	__u8 randomizer[16];
+} __packed;
+
+#define MGMT_OP_ADD_REMOTE_OOB_DATA	0x0019
+struct mgmt_cp_add_remote_oob_data {
+	bdaddr_t bdaddr;
+	__u8 hash[16];
+	__u8 randomizer[16];
+} __packed;
+
+#define MGMT_OP_REMOVE_REMOTE_OOB_DATA	0x001A
+struct mgmt_cp_remove_remote_oob_data {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_OP_START_DISCOVERY		0x001B
+
+#define MGMT_OP_STOP_DISCOVERY		0x001C
+
+#define MGMT_OP_BLOCK_DEVICE		0x001D
+struct mgmt_cp_block_device {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_OP_UNBLOCK_DEVICE		0x001E
+struct mgmt_cp_unblock_device {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_OP_SET_FAST_CONNECTABLE	0x001F
+struct mgmt_cp_set_fast_connectable {
+	__u8 enable;
+} __packed;
+
+#define MGMT_EV_CMD_COMPLETE		0x0001
+struct mgmt_ev_cmd_complete {
+	__le16 opcode;
+	__u8 data[0];
+} __packed;
+
+#define MGMT_EV_CMD_STATUS		0x0002
+struct mgmt_ev_cmd_status {
+	__u8 status;
+	__le16 opcode;
+} __packed;
+
+#define MGMT_EV_CONTROLLER_ERROR	0x0003
+struct mgmt_ev_controller_error {
+	__u8 error_code;
+} __packed;
+
+#define MGMT_EV_INDEX_ADDED		0x0004
+
+#define MGMT_EV_INDEX_REMOVED		0x0005
+
+#define MGMT_EV_POWERED			0x0006
+
+#define MGMT_EV_DISCOVERABLE		0x0007
+
+#define MGMT_EV_CONNECTABLE		0x0008
+
+#define MGMT_EV_PAIRABLE		0x0009
+
+#define MGMT_EV_NEW_LINK_KEY		0x000A
+struct mgmt_ev_new_link_key {
+	__u8 store_hint;
+	struct mgmt_link_key_info key;
+} __packed;
+
+#define MGMT_EV_CONNECTED		0x000B
+
+#define MGMT_EV_DISCONNECTED		0x000C
+
+#define MGMT_EV_CONNECT_FAILED		0x000D
+struct mgmt_ev_connect_failed {
+	struct mgmt_addr_info addr;
+	__u8 status;
+} __packed;
+
+#define MGMT_EV_PIN_CODE_REQUEST	0x000E
+struct mgmt_ev_pin_code_request {
+	bdaddr_t bdaddr;
+	__u8 secure;
+} __packed;
+
+#define MGMT_EV_USER_CONFIRM_REQUEST	0x000F
+struct mgmt_ev_user_confirm_request {
+	bdaddr_t bdaddr;
+	__u8 confirm_hint;
+	__le32 value;
+} __packed;
+
+#define MGMT_EV_AUTH_FAILED		0x0010
+struct mgmt_ev_auth_failed {
+	bdaddr_t bdaddr;
+	__u8 status;
+} __packed;
+
+#define MGMT_EV_LOCAL_NAME_CHANGED	0x0011
+struct mgmt_ev_local_name_changed {
+	__u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_EV_DEVICE_FOUND		0x0012
+struct mgmt_ev_device_found {
+	struct mgmt_addr_info addr;
+	__u8 dev_class[3];
+	__s8 rssi;
+	__u8 eir[HCI_MAX_EIR_LENGTH];
+} __packed;
+
+#define MGMT_EV_REMOTE_NAME		0x0013
+struct mgmt_ev_remote_name {
+	bdaddr_t bdaddr;
+	__u8 name[MGMT_MAX_NAME_LENGTH];
+} __packed;
+
+#define MGMT_EV_DISCOVERING		0x0014
+
+#define MGMT_EV_DEVICE_BLOCKED		0x0015
+struct mgmt_ev_device_blocked {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define MGMT_EV_DEVICE_UNBLOCKED	0x0016
+struct mgmt_ev_device_unblocked {
+	bdaddr_t bdaddr;
+} __packed;
diff --git a/include/compat/net/bluetooth/rfcomm.h b/include/compat/net/bluetooth/rfcomm.h
new file mode 100755
index 0000000..e2e3eca
--- /dev/null
+++ b/include/compat/net/bluetooth/rfcomm.h
@@ -0,0 +1,372 @@
+/*
+   RFCOMM implementation for Linux Bluetooth stack (BlueZ)
+   Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
+   Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __RFCOMM_H
+#define __RFCOMM_H
+
+#define RFCOMM_PSM 3
+
+#define RFCOMM_CONN_TIMEOUT (HZ * 30)
+#define RFCOMM_DISC_TIMEOUT (HZ * 20)
+#define RFCOMM_AUTH_TIMEOUT (HZ * 25)
+#define RFCOMM_IDLE_TIMEOUT (HZ * 2)
+
+#define RFCOMM_DEFAULT_MTU	127
+#define RFCOMM_DEFAULT_CREDITS	7
+
+#define RFCOMM_MAX_L2CAP_MTU	1013
+#define RFCOMM_MAX_CREDITS	40
+
+#define RFCOMM_SKB_HEAD_RESERVE	8
+#define RFCOMM_SKB_TAIL_RESERVE	2
+#define RFCOMM_SKB_RESERVE  (RFCOMM_SKB_HEAD_RESERVE + RFCOMM_SKB_TAIL_RESERVE)
+
+#define RFCOMM_SABM	0x2f
+#define RFCOMM_DISC	0x43
+#define RFCOMM_UA	0x63
+#define RFCOMM_DM	0x0f
+#define RFCOMM_UIH	0xef
+
+#define RFCOMM_TEST	0x08
+#define RFCOMM_FCON	0x28
+#define RFCOMM_FCOFF	0x18
+#define RFCOMM_MSC	0x38
+#define RFCOMM_RPN	0x24
+#define RFCOMM_RLS	0x14
+#define RFCOMM_PN	0x20
+#define RFCOMM_NSC	0x04
+
+#define RFCOMM_V24_FC	0x02
+#define RFCOMM_V24_RTC	0x04
+#define RFCOMM_V24_RTR	0x08
+#define RFCOMM_V24_IC	0x40
+#define RFCOMM_V24_DV	0x80
+
+#define RFCOMM_RPN_BR_2400	0x0
+#define RFCOMM_RPN_BR_4800	0x1
+#define RFCOMM_RPN_BR_7200	0x2
+#define RFCOMM_RPN_BR_9600	0x3
+#define RFCOMM_RPN_BR_19200	0x4
+#define RFCOMM_RPN_BR_38400	0x5
+#define RFCOMM_RPN_BR_57600	0x6
+#define RFCOMM_RPN_BR_115200	0x7
+#define RFCOMM_RPN_BR_230400	0x8
+
+#define RFCOMM_RPN_DATA_5	0x0
+#define RFCOMM_RPN_DATA_6	0x1
+#define RFCOMM_RPN_DATA_7	0x2
+#define RFCOMM_RPN_DATA_8	0x3
+
+#define RFCOMM_RPN_STOP_1	0
+#define RFCOMM_RPN_STOP_15	1
+
+#define RFCOMM_RPN_PARITY_NONE	0x0
+#define RFCOMM_RPN_PARITY_ODD	0x1
+#define RFCOMM_RPN_PARITY_EVEN	0x3
+#define RFCOMM_RPN_PARITY_MARK	0x5
+#define RFCOMM_RPN_PARITY_SPACE	0x7
+
+#define RFCOMM_RPN_FLOW_NONE	0x00
+
+#define RFCOMM_RPN_XON_CHAR	0x11
+#define RFCOMM_RPN_XOFF_CHAR	0x13
+
+#define RFCOMM_RPN_PM_BITRATE		0x0001
+#define RFCOMM_RPN_PM_DATA		0x0002
+#define RFCOMM_RPN_PM_STOP		0x0004
+#define RFCOMM_RPN_PM_PARITY		0x0008
+#define RFCOMM_RPN_PM_PARITY_TYPE	0x0010
+#define RFCOMM_RPN_PM_XON		0x0020
+#define RFCOMM_RPN_PM_XOFF		0x0040
+#define RFCOMM_RPN_PM_FLOW		0x3F00
+
+#define RFCOMM_RPN_PM_ALL		0x3F7F
+
+struct rfcomm_hdr {
+	u8 addr;
+	u8 ctrl;
+	u8 len;    /* Actual size can be 2 bytes */
+} __packed;
+
+struct rfcomm_cmd {
+	u8 addr;
+	u8 ctrl;
+	u8 len;
+	u8 fcs;
+} __packed;
+
+struct rfcomm_mcc {
+	u8 type;
+	u8 len;
+} __packed;
+
+struct rfcomm_pn {
+	u8  dlci;
+	u8  flow_ctrl;
+	u8  priority;
+	u8  ack_timer;
+	__le16 mtu;
+	u8  max_retrans;
+	u8  credits;
+} __packed;
+
+struct rfcomm_rpn {
+	u8  dlci;
+	u8  bit_rate;
+	u8  line_settings;
+	u8  flow_ctrl;
+	u8  xon_char;
+	u8  xoff_char;
+	__le16 param_mask;
+} __packed;
+
+struct rfcomm_rls {
+	u8  dlci;
+	u8  status;
+} __packed;
+
+struct rfcomm_msc {
+	u8  dlci;
+	u8  v24_sig;
+} __packed;
+
+/* ---- Core structures, flags etc ---- */
+
+struct rfcomm_session {
+	struct list_head list;
+	struct socket   *sock;
+	struct timer_list timer;
+	unsigned long    state;
+	unsigned long    flags;
+	atomic_t         refcnt;
+	int              initiator;
+
+	/* Default DLC parameters */
+	int    cfc;
+	uint   mtu;
+
+	struct list_head dlcs;
+};
+
+struct rfcomm_dlc {
+	struct list_head      list;
+	struct rfcomm_session *session;
+	struct sk_buff_head   tx_queue;
+	struct timer_list     timer;
+
+	spinlock_t    lock;
+	unsigned long state;
+	unsigned long flags;
+	atomic_t      refcnt;
+	u8            dlci;
+	u8            addr;
+	u8            priority;
+	u8            v24_sig;
+	u8            remote_v24_sig;
+	u8            mscex;
+	u8            out;
+	u8            sec_level;
+	u8            role_switch;
+	u32           defer_setup;
+
+	uint          mtu;
+	uint          cfc;
+	uint          rx_credits;
+	uint          tx_credits;
+
+	void          *owner;
+
+	void (*data_ready)(struct rfcomm_dlc *d, struct sk_buff *skb);
+	void (*state_change)(struct rfcomm_dlc *d, int err);
+	void (*modem_status)(struct rfcomm_dlc *d, u8 v24_sig);
+};
+
+/* DLC and session flags */
+#define RFCOMM_RX_THROTTLED 0
+#define RFCOMM_TX_THROTTLED 1
+#define RFCOMM_TIMED_OUT    2
+#define RFCOMM_MSC_PENDING  3
+#define RFCOMM_SEC_PENDING  4
+#define RFCOMM_AUTH_PENDING 5
+#define RFCOMM_AUTH_ACCEPT  6
+#define RFCOMM_AUTH_REJECT  7
+#define RFCOMM_DEFER_SETUP  8
+#define RFCOMM_ENC_DROP     9
+
+/* Scheduling flags and events */
+#define RFCOMM_SCHED_WAKEUP 31
+
+/* MSC exchange flags */
+#define RFCOMM_MSCEX_TX     1
+#define RFCOMM_MSCEX_RX     2
+#define RFCOMM_MSCEX_OK     (RFCOMM_MSCEX_TX + RFCOMM_MSCEX_RX)
+
+/* CFC states */
+#define RFCOMM_CFC_UNKNOWN  -1
+#define RFCOMM_CFC_DISABLED 0
+#define RFCOMM_CFC_ENABLED  RFCOMM_MAX_CREDITS
+
+/* ---- RFCOMM SEND RPN ---- */
+int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
+			u8 bit_rate, u8 data_bits, u8 stop_bits,
+			u8 parity, u8 flow_ctrl_settings,
+			u8 xon_char, u8 xoff_char, u16 param_mask);
+
+/* ---- RFCOMM DLCs (channels) ---- */
+struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio);
+void rfcomm_dlc_free(struct rfcomm_dlc *d);
+int  rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst,
+								u8 channel);
+int  rfcomm_dlc_close(struct rfcomm_dlc *d, int reason);
+int  rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb);
+int  rfcomm_dlc_set_modem_status(struct rfcomm_dlc *d, u8 v24_sig);
+int  rfcomm_dlc_get_modem_status(struct rfcomm_dlc *d, u8 *v24_sig);
+void rfcomm_dlc_accept(struct rfcomm_dlc *d);
+
+#define rfcomm_dlc_lock(d)     spin_lock(&d->lock)
+#define rfcomm_dlc_unlock(d)   spin_unlock(&d->lock)
+
+static inline void rfcomm_dlc_hold(struct rfcomm_dlc *d)
+{
+	atomic_inc(&d->refcnt);
+}
+
+static inline void rfcomm_dlc_put(struct rfcomm_dlc *d)
+{
+	if (atomic_dec_and_test(&d->refcnt))
+		rfcomm_dlc_free(d);
+}
+
+extern void __rfcomm_dlc_throttle(struct rfcomm_dlc *d);
+extern void __rfcomm_dlc_unthrottle(struct rfcomm_dlc *d);
+
+static inline void rfcomm_dlc_throttle(struct rfcomm_dlc *d)
+{
+	if (!test_and_set_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_throttle(d);
+}
+
+static inline void rfcomm_dlc_unthrottle(struct rfcomm_dlc *d)
+{
+	if (test_and_clear_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_unthrottle(d);
+}
+
+/* ---- RFCOMM sessions ---- */
+void   rfcomm_session_getaddr(struct rfcomm_session *s, bdaddr_t *src,
+								bdaddr_t *dst);
+
+static inline void rfcomm_session_hold(struct rfcomm_session *s)
+{
+	atomic_inc(&s->refcnt);
+}
+
+/* ---- RFCOMM sockets ---- */
+struct sockaddr_rc {
+	sa_family_t	rc_family;
+	bdaddr_t	rc_bdaddr;
+	u8		rc_channel;
+};
+
+#define RFCOMM_CONNINFO	0x02
+struct rfcomm_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define RFCOMM_LM	0x03
+#define RFCOMM_LM_MASTER	0x0001
+#define RFCOMM_LM_AUTH		0x0002
+#define RFCOMM_LM_ENCRYPT	0x0004
+#define RFCOMM_LM_TRUSTED	0x0008
+#define RFCOMM_LM_RELIABLE	0x0010
+#define RFCOMM_LM_SECURE	0x0020
+
+#define rfcomm_pi(sk) ((struct rfcomm_pinfo *) sk)
+
+struct rfcomm_pinfo {
+	struct bt_sock bt;
+	struct rfcomm_dlc   *dlc;
+	u8     channel;
+	u8     sec_level;
+	u8     role_switch;
+};
+
+int  rfcomm_init_sockets(void);
+void rfcomm_cleanup_sockets(void);
+
+int  rfcomm_connect_ind(struct rfcomm_session *s, u8 channel,
+							struct rfcomm_dlc **d);
+
+/* ---- RFCOMM TTY ---- */
+#define RFCOMM_MAX_DEV  256
+
+#define RFCOMMCREATEDEV		_IOW('R', 200, int)
+#define RFCOMMRELEASEDEV	_IOW('R', 201, int)
+#define RFCOMMGETDEVLIST	_IOR('R', 210, int)
+#define RFCOMMGETDEVINFO	_IOR('R', 211, int)
+#define RFCOMMSTEALDLC		_IOW('R', 220, int)
+
+#define RFCOMM_REUSE_DLC      0
+#define RFCOMM_RELEASE_ONHUP  1
+#define RFCOMM_HANGUP_NOW     2
+#define RFCOMM_TTY_ATTACHED   3
+#define RFCOMM_TTY_RELEASED   4
+
+struct rfcomm_dev_req {
+	s16      dev_id;
+	u32      flags;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+};
+
+struct rfcomm_dev_info {
+	s16      id;
+	u32      flags;
+	u16      state;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+};
+
+struct rfcomm_dev_list_req {
+	u16      dev_num;
+	struct   rfcomm_dev_info dev_info[0];
+};
+
+int  rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
+int  rfcomm_init_ttys(void);
+void rfcomm_cleanup_ttys(void);
+#else
+static inline int rfcomm_init_ttys(void)
+{
+	return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
+#endif /* __RFCOMM_H */
diff --git a/include/compat/net/bluetooth/smp.h b/include/compat/net/bluetooth/smp.h
new file mode 100755
index 0000000..15b97d5
--- /dev/null
+++ b/include/compat/net/bluetooth/smp.h
@@ -0,0 +1,140 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __SMP_H
+#define __SMP_H
+
+struct smp_command_hdr {
+	__u8	code;
+} __packed;
+
+#define SMP_CMD_PAIRING_REQ	0x01
+#define SMP_CMD_PAIRING_RSP	0x02
+struct smp_cmd_pairing {
+	__u8	io_capability;
+	__u8	oob_flag;
+	__u8	auth_req;
+	__u8	max_key_size;
+	__u8	init_key_dist;
+	__u8	resp_key_dist;
+} __packed;
+
+#define SMP_IO_DISPLAY_ONLY	0x00
+#define SMP_IO_DISPLAY_YESNO	0x01
+#define SMP_IO_KEYBOARD_ONLY	0x02
+#define SMP_IO_NO_INPUT_OUTPUT	0x03
+#define SMP_IO_KEYBOARD_DISPLAY	0x04
+
+#define SMP_OOB_NOT_PRESENT	0x00
+#define SMP_OOB_PRESENT		0x01
+
+#define SMP_DIST_ENC_KEY	0x01
+#define SMP_DIST_ID_KEY		0x02
+#define SMP_DIST_SIGN		0x04
+
+#define SMP_AUTH_NONE		0x00
+#define SMP_AUTH_BONDING	0x01
+#define SMP_AUTH_MITM		0x04
+
+#define SMP_CMD_PAIRING_CONFIRM	0x03
+struct smp_cmd_pairing_confirm {
+	__u8	confirm_val[16];
+} __packed;
+
+#define SMP_CMD_PAIRING_RANDOM	0x04
+struct smp_cmd_pairing_random {
+	__u8	rand_val[16];
+} __packed;
+
+#define SMP_CMD_PAIRING_FAIL	0x05
+struct smp_cmd_pairing_fail {
+	__u8	reason;
+} __packed;
+
+#define SMP_CMD_ENCRYPT_INFO	0x06
+struct smp_cmd_encrypt_info {
+	__u8	ltk[16];
+} __packed;
+
+#define SMP_CMD_MASTER_IDENT	0x07
+struct smp_cmd_master_ident {
+	__u16	ediv;
+	__u8	rand[8];
+} __packed;
+
+#define SMP_CMD_IDENT_INFO	0x08
+struct smp_cmd_ident_info {
+	__u8	irk[16];
+} __packed;
+
+#define SMP_CMD_IDENT_ADDR_INFO	0x09
+struct smp_cmd_ident_addr_info {
+	__u8	addr_type;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define SMP_CMD_SIGN_INFO	0x0a
+struct smp_cmd_sign_info {
+	__u8	csrk[16];
+} __packed;
+
+#define SMP_CMD_SECURITY_REQ	0x0b
+struct smp_cmd_security_req {
+	__u8	auth_req;
+} __packed;
+
+#define SMP_PASSKEY_ENTRY_FAILED	0x01
+#define SMP_OOB_NOT_AVAIL		0x02
+#define SMP_AUTH_REQUIREMENTS		0x03
+#define SMP_CONFIRM_FAILED		0x04
+#define SMP_PAIRING_NOTSUPP		0x05
+#define SMP_ENC_KEY_SIZE		0x06
+#define SMP_CMD_NOTSUPP		0x07
+#define SMP_UNSPECIFIED		0x08
+#define SMP_REPEATED_ATTEMPTS		0x09
+
+#define SMP_MIN_ENC_KEY_SIZE		7
+#define SMP_MAX_ENC_KEY_SIZE		16
+
+struct smp_chan {
+	struct l2cap_conn *conn;
+	u8		preq[7]; /* SMP Pairing Request */
+	u8		prsp[7]; /* SMP Pairing Response */
+	u8              prnd[16]; /* SMP Pairing Random (local) */
+	u8              rrnd[16]; /* SMP Pairing Random (remote) */
+	u8		pcnf[16]; /* SMP Pairing Confirm */
+	u8		tk[16]; /* SMP Temporary Key */
+	u8		smp_key_size;
+	struct crypto_blkcipher	*tfm;
+	struct work_struct confirm;
+	struct work_struct random;
+
+};
+
+/* SMP Commands */
+int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
+int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
+
+void smp_chan_destroy(struct l2cap_conn *conn);
+
+#endif /* __SMP_H */
diff --git a/include/compat/net/cfg80211-wext.h b/include/compat/net/cfg80211-wext.h
new file mode 100755
index 0000000..25baddc
--- /dev/null
+++ b/include/compat/net/cfg80211-wext.h
@@ -0,0 +1,55 @@
+#ifndef __NET_CFG80211_WEXT_H
+#define __NET_CFG80211_WEXT_H
+/*
+ * 802.11 device and configuration interface -- wext handlers
+ *
+ * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * These are used only by drivers that aren't yet fully
+ * converted to cfg80211.
+ */
+int cfg80211_wext_giwname(struct net_device *dev,
+			  struct iw_request_info *info,
+			  char *name, char *extra);
+int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
+			  u32 *mode, char *extra);
+int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
+			  u32 *mode, char *extra);
+int cfg80211_wext_siwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+int cfg80211_wext_giwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra);
+int cfg80211_wext_giwrange(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_point *data, char *extra);
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+
+#endif /* __NET_CFG80211_WEXT_H */
diff --git a/include/compat/net/cfg80211.h b/include/compat/net/cfg80211.h
new file mode 100755
index 0000000..881a0d9
--- /dev/null
+++ b/include/compat/net/cfg80211.h
@@ -0,0 +1,3407 @@
+#ifndef __NET_CFG80211_H
+#define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
+#include <linux/netlink.h>
+#include <linux/skbuff.h>
+#include <linux/nl80211.h>
+#include <linux/if_ether.h>
+#include <linux/ieee80211.h>
+#include <net/regulatory.h>
+
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
+/*
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
+ *
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
+ * @IEEE80211_NUM_BANDS: number of defined bands
+ */
+enum ieee80211_band {
+	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
+
+	/* keep last */
+	IEEE80211_NUM_BANDS
+};
+
+/**
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ *	is not permitted.
+ * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ *	is not permitted.
+ */
+enum ieee80211_channel_flags {
+	IEEE80211_CHAN_DISABLED		= 1<<0,
+	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
+	IEEE80211_CHAN_NO_IBSS		= 1<<2,
+	IEEE80211_CHAN_RADAR		= 1<<3,
+	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
+	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
+};
+
+#define IEEE80211_CHAN_NO_HT40 \
+	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ *	code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ *	has been found on this channel. Use regulatory_hint_found_beacon()
+ *	to enable this, this is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
+ */
+struct ieee80211_channel {
+	enum ieee80211_band band;
+	u16 center_freq;
+	u16 hw_value;
+	u32 flags;
+	int max_antenna_gain;
+	int max_power;
+	bool beacon_found;
+	u32 orig_flags;
+	int orig_mag, orig_mpwr;
+};
+
+/**
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ *	preamble on this bitrate; only relevant in 2.4GHz band and
+ *	with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ *	when used with 802.11a (on the 5 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ *	when used with 802.11b (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ *	when used with 802.11g (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
+ */
+enum ieee80211_rate_flags {
+	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
+	IEEE80211_RATE_MANDATORY_A	= 1<<1,
+	IEEE80211_RATE_MANDATORY_B	= 1<<2,
+	IEEE80211_RATE_MANDATORY_G	= 1<<3,
+	IEEE80211_RATE_ERP_G		= 1<<4,
+};
+
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ *	short preamble is used
+ */
+struct ieee80211_rate {
+	u32 flags;
+	u16 bitrate;
+	u16 hw_value, hw_value_short;
+};
+
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+	u16 cap; /* use IEEE80211_HT_CAP_ */
+	bool ht_supported;
+	u8 ampdu_factor;
+	u8 ampdu_density;
+	struct ieee80211_mcs_info mcs;
+};
+
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ *	in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ *	in this band. Must be sorted to give a valid "supported
+ *	rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ * @ht_cap: HT capabilities in this band
+ */
+struct ieee80211_supported_band {
+	struct ieee80211_channel *channels;
+	struct ieee80211_rate *bitrates;
+	enum ieee80211_band band;
+	int n_channels;
+	int n_bitrates;
+	struct ieee80211_sta_ht_cap ht_cap;
+};
+
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
+
+/**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @use_4addr: use 4-address frames
+ */
+struct vif_params {
+       int use_4addr;
+};
+
+/**
+ * struct key_params - key information
+ *
+ * Information about a key
+ *
+ * @key: key material
+ * @key_len: length of key material
+ * @cipher: cipher suite selector
+ * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
+ *	with the get_key() callback, must be in little endian,
+ *	length given by @seq_len.
+ * @seq_len: length of @seq.
+ */
+struct key_params {
+	u8 *key;
+	u8 *seq;
+	int key_len;
+	int seq_len;
+	u32 cipher;
+};
+
+/**
+ * enum survey_info_flags - survey information flags
+ *
+ * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
+ * @SURVEY_INFO_IN_USE: channel is currently being used
+ * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
+ *
+ * Used by the driver to indicate which info in &struct survey_info
+ * it has filled in during the get_survey().
+ */
+enum survey_info_flags {
+	SURVEY_INFO_NOISE_DBM = 1<<0,
+	SURVEY_INFO_IN_USE = 1<<1,
+	SURVEY_INFO_CHANNEL_TIME = 1<<2,
+	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
+	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
+	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
+	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
+};
+
+/**
+ * struct survey_info - channel survey response
+ *
+ * @channel: the channel this survey record reports, mandatory
+ * @filled: bitflag of flags from &enum survey_info_flags
+ * @noise: channel noise in dBm. This and all following fields are
+ *     optional
+ * @channel_time: amount of time in ms the radio spent on the channel
+ * @channel_time_busy: amount of time the primary channel was sensed busy
+ * @channel_time_ext_busy: amount of time the extension channel was sensed busy
+ * @channel_time_rx: amount of time the radio spent receiving data
+ * @channel_time_tx: amount of time the radio spent transmitting data
+ *
+ * Used by dump_survey() to report back per-channel survey information.
+ *
+ * This structure can later be expanded with things like
+ * channel duty cycle etc.
+ */
+struct survey_info {
+	struct ieee80211_channel *channel;
+	u64 channel_time;
+	u64 channel_time_busy;
+	u64 channel_time_ext_busy;
+	u64 channel_time_rx;
+	u64 channel_time_tx;
+	u32 filled;
+	s8 noise;
+};
+
+/**
+ * struct cfg80211_crypto_settings - Crypto settings
+ * @wpa_versions: indicates which, if any, WPA versions are enabled
+ *	(from enum nl80211_wpa_versions)
+ * @cipher_group: group key cipher suite (or 0 if unset)
+ * @n_ciphers_pairwise: number of AP supported unicast ciphers
+ * @ciphers_pairwise: unicast key cipher suites
+ * @n_akm_suites: number of AKM suites
+ * @akm_suites: AKM suites
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ *	required to assume that the port is unauthorized until authorized by
+ *	user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ *	allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ *	protocol frames.
+ */
+struct cfg80211_crypto_settings {
+	u32 wpa_versions;
+	u32 cipher_group;
+	int n_ciphers_pairwise;
+	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
+	int n_akm_suites;
+	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+	bool control_port;
+	__be16 control_port_ethertype;
+	bool control_port_no_encrypt;
+};
+
+/**
+ * struct beacon_parameters - beacon parameters
+ *
+ * Used to configure the beacon for an interface.
+ *
+ * @head: head portion of beacon (before TIM IE)
+ *     or %NULL if not changed
+ * @tail: tail portion of beacon (after TIM IE)
+ *     or %NULL if not changed
+ * @interval: beacon interval or zero if not changed
+ * @dtim_period: DTIM period or zero if not changed
+ * @head_len: length of @head
+ * @tail_len: length of @tail
+ * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
+ *	user space)
+ * @ssid_len: length of @ssid
+ * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
+ * @crypto: crypto settings
+ * @privacy: the BSS uses privacy
+ * @auth_type: Authentication type (algorithm)
+ * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
+ * @beacon_ies_len: length of beacon_ies in octets
+ * @proberesp_ies: extra information element(s) to add into Probe Response
+ *	frames or %NULL
+ * @proberesp_ies_len: length of proberesp_ies in octets
+ * @assocresp_ies: extra information element(s) to add into (Re)Association
+ *	Response frames or %NULL
+ * @assocresp_ies_len: length of assocresp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ * @probe_resp: probe response template (AP mode only)
+ */
+struct beacon_parameters {
+	u8 *head, *tail;
+	int interval, dtim_period;
+	int head_len, tail_len;
+	const u8 *ssid;
+	size_t ssid_len;
+	enum nl80211_hidden_ssid hidden_ssid;
+	struct cfg80211_crypto_settings crypto;
+	bool privacy;
+	enum nl80211_auth_type auth_type;
+	const u8 *beacon_ies;
+	size_t beacon_ies_len;
+	const u8 *proberesp_ies;
+	size_t proberesp_ies_len;
+	const u8 *assocresp_ies;
+	size_t assocresp_ies_len;
+	int probe_resp_len;
+	u8 *probe_resp;
+};
+
+/**
+ * enum plink_action - actions to perform in mesh peers
+ *
+ * @PLINK_ACTION_INVALID: action 0 is reserved
+ * @PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ */
+enum plink_actions {
+	PLINK_ACTION_INVALID,
+	PLINK_ACTION_OPEN,
+	PLINK_ACTION_BLOCK,
+};
+
+/**
+ * enum station_parameters_apply_mask - station parameter values to apply
+ * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
+ *
+ * Not all station parameters have in-band "no change" signalling,
+ * for those that don't these flags will are used.
+ */
+enum station_parameters_apply_mask {
+	STATION_PARAM_APPLY_UAPSD = BIT(0),
+};
+
+/**
+ * struct station_parameters - station parameters
+ *
+ * Used to change and create a new station.
+ *
+ * @vlan: vlan interface station should belong to
+ * @supported_rates: supported rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @supported_rates_len: number of supported rates
+ * @sta_flags_mask: station flags that changed
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @sta_flags_set: station flags values
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @listen_interval: listen interval or -1 for no change
+ * @aid: AID or zero for no change
+ * @plink_action: plink action to take
+ * @plink_state: set the peer link state for a station
+ * @ht_capa: HT capabilities of station
+ * @uapsd_queues: bitmap of queues configured for uapsd. same format
+ *	as the AC bitmap in the QoS info field
+ * @max_sp: max Service Period. same format as the MAX_SP in the
+ *	QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ *	(for those that don't have a natural "no change" value),
+ *	see &enum station_parameters_apply_mask
+ */
+struct station_parameters {
+	u8 *supported_rates;
+	struct net_device *vlan;
+	u32 sta_flags_mask, sta_flags_set;
+	u32 sta_modify_mask;
+	int listen_interval;
+	u16 aid;
+	u8 supported_rates_len;
+	u8 plink_action;
+	u8 plink_state;
+	struct ieee80211_ht_cap *ht_capa;
+	u8 uapsd_queues;
+	u8 max_sp;
+};
+
+/**
+ * enum station_info_flags - station information flags
+ *
+ * Used by the driver to indicate which info in &struct station_info
+ * it has filled in during get_station() or dump_station().
+ *
+ * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
+ * @STATION_INFO_RX_BYTES: @rx_bytes filled
+ * @STATION_INFO_TX_BYTES: @tx_bytes filled
+ * @STATION_INFO_LLID: @llid filled
+ * @STATION_INFO_PLID: @plid filled
+ * @STATION_INFO_PLINK_STATE: @plink_state filled
+ * @STATION_INFO_SIGNAL: @signal filled
+ * @STATION_INFO_TX_BITRATE: @txrate fields are filled
+ *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
+ * @STATION_INFO_RX_PACKETS: @rx_packets filled
+ * @STATION_INFO_TX_PACKETS: @tx_packets filled
+ * @STATION_INFO_TX_RETRIES: @tx_retries filled
+ * @STATION_INFO_TX_FAILED: @tx_failed filled
+ * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
+ * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
+ * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
+ * @STATION_INFO_BSS_PARAM: @bss_param filled
+ * @STATION_INFO_CONNECTED_TIME: @connected_time filled
+ * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
+ * @STATION_INFO_STA_FLAGS: @sta_flags filled
+ */
+enum station_info_flags {
+	STATION_INFO_INACTIVE_TIME	= 1<<0,
+	STATION_INFO_RX_BYTES		= 1<<1,
+	STATION_INFO_TX_BYTES		= 1<<2,
+	STATION_INFO_LLID		= 1<<3,
+	STATION_INFO_PLID		= 1<<4,
+	STATION_INFO_PLINK_STATE	= 1<<5,
+	STATION_INFO_SIGNAL		= 1<<6,
+	STATION_INFO_TX_BITRATE		= 1<<7,
+	STATION_INFO_RX_PACKETS		= 1<<8,
+	STATION_INFO_TX_PACKETS		= 1<<9,
+	STATION_INFO_TX_RETRIES		= 1<<10,
+	STATION_INFO_TX_FAILED		= 1<<11,
+	STATION_INFO_RX_DROP_MISC	= 1<<12,
+	STATION_INFO_SIGNAL_AVG		= 1<<13,
+	STATION_INFO_RX_BITRATE		= 1<<14,
+	STATION_INFO_BSS_PARAM          = 1<<15,
+	STATION_INFO_CONNECTED_TIME	= 1<<16,
+	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
+	STATION_INFO_STA_FLAGS		= 1<<18
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
+ * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
+ * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ */
+enum rate_info_flags {
+	RATE_INFO_FLAGS_MCS		= 1<<0,
+	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
+	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+};
+
+/**
+ * struct rate_info - bitrate information
+ *
+ * Information about a receiving or transmitting bitrate
+ *
+ * @flags: bitflag of flags from &enum rate_info_flags
+ * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @legacy: bitrate in 100kbit/s for 802.11abg
+ */
+struct rate_info {
+	u8 flags;
+	u8 mcs;
+	u16 legacy;
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
+ * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
+ * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
+ */
+enum bss_param_flags {
+	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
+	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
+	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
+};
+
+/**
+ * struct sta_bss_parameters - BSS parameters for the attached station
+ *
+ * Information about the currently associated BSS
+ *
+ * @flags: bitflag of flags from &enum bss_param_flags
+ * @dtim_period: DTIM period for the BSS
+ * @beacon_interval: beacon interval
+ */
+struct sta_bss_parameters {
+	u8 flags;
+	u8 dtim_period;
+	u16 beacon_interval;
+};
+
+/**
+ * struct station_info - station information
+ *
+ * Station information filled by driver for get_station() and dump_station.
+ *
+ * @filled: bitflag of flags from &enum station_info_flags
+ * @connected_time: time(in secs) since a station is last connected
+ * @inactive_time: time since last station activity (tx/rx) in milliseconds
+ * @rx_bytes: bytes received from this station
+ * @tx_bytes: bytes transmitted to this station
+ * @llid: mesh local link id
+ * @plid: mesh peer link id
+ * @plink_state: mesh peer link state
+ * @signal: signal strength of last received packet in dBm
+ * @signal_avg: signal strength average in dBm
+ * @txrate: current unicast bitrate from this station
+ * @rxrate: current unicast bitrate to this station
+ * @rx_packets: packets received from this station
+ * @tx_packets: packets transmitted to this station
+ * @tx_retries: cumulative retry counts
+ * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_dropped_misc:  Dropped for un-specified reason.
+ * @bss_param: current BSS parameters
+ * @generation: generation number for nl80211 dumps.
+ *	This number should increase every time the list of stations
+ *	changes, i.e. when a station is added or removed, so that
+ *	userspace can tell whether it got a consistent snapshot.
+ * @assoc_req_ies: IEs from (Re)Association Request.
+ *	This is used only when in AP mode with drivers that do not use
+ *	user space MLME/SME implementation. The information is provided for
+ *	the cfg80211_new_sta() calls to notify user space of the IEs.
+ * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
+ */
+struct station_info {
+	u32 filled;
+	u32 connected_time;
+	u32 inactive_time;
+	u32 rx_bytes;
+	u32 tx_bytes;
+	u16 llid;
+	u16 plid;
+	u8 plink_state;
+	s8 signal;
+	s8 signal_avg;
+	struct rate_info txrate;
+	struct rate_info rxrate;
+	u32 rx_packets;
+	u32 tx_packets;
+	u32 tx_retries;
+	u32 tx_failed;
+	u32 rx_dropped_misc;
+	struct sta_bss_parameters bss_param;
+	struct nl80211_sta_flag_update sta_flags;
+
+	int generation;
+
+	const u8 *assoc_req_ies;
+	size_t assoc_req_ies_len;
+
+	/*
+	 * Note: Add a new enum station_info_flags value for each new field and
+	 * use it to check which fields are initialized.
+	 */
+};
+
+/**
+ * enum monitor_flags - monitor flags
+ *
+ * Monitor interface configuration flags. Note that these must be the bits
+ * according to the nl80211 flags.
+ *
+ * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @MONITOR_FLAG_CONTROL: pass control frames
+ * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
+ */
+enum monitor_flags {
+	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
+	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
+	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
+	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
+	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
+};
+
+/**
+ * enum mpath_info_flags -  mesh path information flags
+ *
+ * Used by the driver to indicate which info in &struct mpath_info it has filled
+ * in during get_station() or dump_station().
+ *
+ * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
+ * @MPATH_INFO_SN: @sn filled
+ * @MPATH_INFO_METRIC: @metric filled
+ * @MPATH_INFO_EXPTIME: @exptime filled
+ * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
+ * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
+ * @MPATH_INFO_FLAGS: @flags filled
+ */
+enum mpath_info_flags {
+	MPATH_INFO_FRAME_QLEN		= BIT(0),
+	MPATH_INFO_SN			= BIT(1),
+	MPATH_INFO_METRIC		= BIT(2),
+	MPATH_INFO_EXPTIME		= BIT(3),
+	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
+	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
+	MPATH_INFO_FLAGS		= BIT(6),
+};
+
+/**
+ * struct mpath_info - mesh path information
+ *
+ * Mesh path information filled by driver for get_mpath() and dump_mpath().
+ *
+ * @filled: bitfield of flags from &enum mpath_info_flags
+ * @frame_qlen: number of queued frames for this destination
+ * @sn: target sequence number
+ * @metric: metric (cost) of this mesh path
+ * @exptime: expiration time for the mesh path from now, in msecs
+ * @flags: mesh path flags
+ * @discovery_timeout: total mesh path discovery timeout, in msecs
+ * @discovery_retries: mesh path discovery retries
+ * @generation: generation number for nl80211 dumps.
+ *	This number should increase every time the list of mesh paths
+ *	changes, i.e. when a station is added or removed, so that
+ *	userspace can tell whether it got a consistent snapshot.
+ */
+struct mpath_info {
+	u32 filled;
+	u32 frame_qlen;
+	u32 sn;
+	u32 metric;
+	u32 exptime;
+	u32 discovery_timeout;
+	u8 discovery_retries;
+	u8 flags;
+
+	int generation;
+};
+
+/**
+ * struct bss_parameters - BSS parameters
+ *
+ * Used to change BSS parameters (mainly for AP mode).
+ *
+ * @use_cts_prot: Whether to use CTS protection
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_preamble: Whether the use of short preambles is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_slot_time: Whether the use of short slot time is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @basic_rates: basic rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @basic_rates_len: number of basic rates
+ * @ap_isolate: do not forward packets between connected stations
+ * @ht_opmode: HT Operation mode
+ *	(u16 = opmode, -1 = do not change)
+ */
+struct bss_parameters {
+	int use_cts_prot;
+	int use_short_preamble;
+	int use_short_slot_time;
+	u8 *basic_rates;
+	u8 basic_rates_len;
+	int ap_isolate;
+	int ht_opmode;
+};
+
+/*
+ * struct mesh_config - 802.11s mesh configuration
+ *
+ * These parameters can be changed while the mesh is active.
+ */
+struct mesh_config {
+	/* Timeouts in ms */
+	/* Mesh plink management parameters */
+	u16 dot11MeshRetryTimeout;
+	u16 dot11MeshConfirmTimeout;
+	u16 dot11MeshHoldingTimeout;
+	u16 dot11MeshMaxPeerLinks;
+	u8  dot11MeshMaxRetries;
+	u8  dot11MeshTTL;
+	/* ttl used in path selection information elements */
+	u8  element_ttl;
+	bool auto_open_plinks;
+	/* HWMP parameters */
+	u8  dot11MeshHWMPmaxPREQretries;
+	u32 path_refresh_time;
+	u16 min_discovery_timeout;
+	u32 dot11MeshHWMPactivePathTimeout;
+	u16 dot11MeshHWMPpreqMinInterval;
+	u16 dot11MeshHWMPnetDiameterTraversalTime;
+	u8  dot11MeshHWMPRootMode;
+	u16 dot11MeshHWMPRannInterval;
+	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
+	 * set to true only means that the station will announce others it's a
+	 * mesh gate, but not necessarily using the gate announcement protocol.
+	 * Still keeping the same nomenclature to be in sync with the spec. */
+	bool  dot11MeshGateAnnouncementProtocol;
+};
+
+/**
+ * struct mesh_setup - 802.11s mesh setup configuration
+ * @mesh_id: the mesh ID
+ * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
+ * @path_sel_proto: which path selection protocol to use
+ * @path_metric: which metric to use
+ * @ie: vendor information elements (optional)
+ * @ie_len: length of vendor information elements
+ * @is_authenticated: this mesh requires authentication
+ * @is_secure: this mesh uses security
+ *
+ * These parameters are fixed when the mesh is created.
+ */
+struct mesh_setup {
+	const u8 *mesh_id;
+	u8 mesh_id_len;
+	u8  path_sel_proto;
+	u8  path_metric;
+	const u8 *ie;
+	u8 ie_len;
+	bool is_authenticated;
+	bool is_secure;
+};
+
+/**
+ * struct ieee80211_txq_params - TX queue parameters
+ * @queue: TX queue identifier (NL80211_TXQ_Q_*)
+ * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @aifs: Arbitration interframe space [0..255]
+ */
+struct ieee80211_txq_params {
+	enum nl80211_txq_q queue;
+	u16 txop;
+	u16 cwmin;
+	u16 cwmax;
+	u8 aifs;
+};
+
+/* from net/wireless.h */
+struct wiphy;
+
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
+
+/**
+ * struct cfg80211_ssid - SSID description
+ * @ssid: the SSID
+ * @ssid_len: length of the ssid
+ */
+struct cfg80211_ssid {
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len;
+};
+
+/**
+ * struct cfg80211_scan_request - scan request description
+ *
+ * @ssids: SSIDs to scan for (active scan only)
+ * @n_ssids: number of SSIDs
+ * @channels: channels to scan on.
+ * @n_channels: total number of channels to scan
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @rates: bitmap of rates to advertise for each band
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @aborted: (internal) scan request was notified as aborted
+ * @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ */
+struct cfg80211_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	const u8 *ie;
+	size_t ie_len;
+
+	u32 rates[IEEE80211_NUM_BANDS];
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+	bool aborted;
+	bool no_cck;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
+/**
+ * struct cfg80211_match_set - sets of attributes to match
+ *
+ * @ssid: SSID to be matched
+ */
+struct cfg80211_match_set {
+	struct cfg80211_ssid ssid;
+};
+
+/**
+ * struct cfg80211_sched_scan_request - scheduled scan request description
+ *
+ * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
+ * @n_ssids: number of SSIDs
+ * @n_channels: total number of channels to scan
+ * @interval: interval between each scheduled scan cycle
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @match_sets: sets of parameters to be matched for a scan result
+ *	entry to be considered valid and to be passed to the host
+ *	(others are filtered out).
+ *	If ommited, all results are passed.
+ * @n_match_sets: number of match sets
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @channels: channels to scan
+ */
+struct cfg80211_sched_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	u32 interval;
+	const u8 *ie;
+	size_t ie_len;
+	struct cfg80211_match_set *match_sets;
+	int n_match_sets;
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
+/**
+ * enum cfg80211_signal_type - signal type
+ *
+ * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
+ * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
+ * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
+ */
+enum cfg80211_signal_type {
+	CFG80211_SIGNAL_TYPE_NONE,
+	CFG80211_SIGNAL_TYPE_MBM,
+	CFG80211_SIGNAL_TYPE_UNSPEC,
+};
+
+/**
+ * struct cfg80211_bss - BSS description
+ *
+ * This structure describes a BSS (which may also be a mesh network)
+ * for use in scan results and similar.
+ *
+ * @channel: channel this BSS is on
+ * @bssid: BSSID of the BSS
+ * @tsf: timestamp of last received update
+ * @beacon_interval: the beacon interval as from the frame
+ * @capability: the capability field in host byte order
+ * @information_elements: the information elements (Note that there
+ *	is no guarantee that these are well-formed!); this is a pointer to
+ *	either the beacon_ies or proberesp_ies depending on whether Probe
+ *	Response frame has been received
+ * @len_information_elements: total length of the information elements
+ * @beacon_ies: the information elements from the last Beacon frame
+ * @len_beacon_ies: total length of the beacon_ies
+ * @proberesp_ies: the information elements from the last Probe Response frame
+ * @len_proberesp_ies: total length of the proberesp_ies
+ * @signal: signal strength value (type depends on the wiphy's signal_type)
+ * @free_priv: function pointer to free private data
+ * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
+ */
+struct cfg80211_bss {
+	struct ieee80211_channel *channel;
+
+	u8 bssid[ETH_ALEN];
+	u64 tsf;
+	u16 beacon_interval;
+	u16 capability;
+	u8 *information_elements;
+	size_t len_information_elements;
+	u8 *beacon_ies;
+	size_t len_beacon_ies;
+	u8 *proberesp_ies;
+	size_t len_proberesp_ies;
+
+	s32 signal;
+
+	void (*free_priv)(struct cfg80211_bss *bss);
+	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
+ * ieee80211_bss_get_ie - find IE with given ID
+ * @bss: the bss to search
+ * @ie: the IE ID
+ * Returns %NULL if not found.
+ */
+const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
+
+
+/**
+ * struct cfg80211_auth_request - Authentication request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * authentication.
+ *
+ * @bss: The BSS to authenticate with.
+ * @auth_type: Authentication type (algorithm)
+ * @ie: Extra IEs to add to Authentication frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
+ * @local_state_change: This is a request for a local state only, i.e., no
+ *	Authentication frame is to be transmitted and authentication state is
+ *	to be changed without having to wait for a response from the peer STA
+ *	(AP).
+ */
+struct cfg80211_auth_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie;
+	size_t ie_len;
+	enum nl80211_auth_type auth_type;
+	const u8 *key;
+	u8 key_len, key_idx;
+	bool local_state_change;
+};
+
+/**
+ * struct cfg80211_assoc_request - (Re)Association request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * (re)association.
+ * @bss: The BSS to associate with.
+ * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
+ * @crypto: crypto settings
+ * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
+ */
+struct cfg80211_assoc_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie, *prev_bssid;
+	size_t ie_len;
+	struct cfg80211_crypto_settings crypto;
+	bool use_mfp;
+};
+
+/**
+ * struct cfg80211_deauth_request - Deauthentication request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * deauthentication.
+ *
+ * @bss: the BSS to deauthenticate from
+ * @ie: Extra IEs to add to Deauthentication frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the deauthentication
+ * @local_state_change: This is a request for a local state only, i.e., no
+ *	Deauthentication frame is to be transmitted.
+ */
+struct cfg80211_deauth_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie;
+	size_t ie_len;
+	u16 reason_code;
+	bool local_state_change;
+};
+
+/**
+ * struct cfg80211_disassoc_request - Disassociation request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * disassocation.
+ *
+ * @bss: the BSS to disassociate from
+ * @ie: Extra IEs to add to Disassociation frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the disassociation
+ * @local_state_change: This is a request for a local state only, i.e., no
+ *	Disassociation frame is to be transmitted.
+ */
+struct cfg80211_disassoc_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie;
+	size_t ie_len;
+	u16 reason_code;
+	bool local_state_change;
+};
+
+/**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ *	search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_fixed: The channel should be fixed -- do not search for
+ *	IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ * @privacy: this is a protected network, keys will be configured
+ *	after joining
+ * @basic_rates: bitmap of basic rates to use when creating the IBSS
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
+ */
+struct cfg80211_ibss_params {
+	u8 *ssid;
+	u8 *bssid;
+	struct ieee80211_channel *channel;
+	u8 *ie;
+	u8 ssid_len, ie_len;
+	u16 beacon_interval;
+	u32 basic_rates;
+	bool channel_fixed;
+	bool privacy;
+	int mcast_rate[IEEE80211_NUM_BANDS];
+};
+
+/**
+ * struct cfg80211_connect_params - Connection parameters
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * authentication and association.
+ *
+ * @channel: The channel to use or %NULL if not specified (auto-select based
+ *	on scan results)
+ * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
+ *	results)
+ * @ssid: SSID
+ * @ssid_len: Length of ssid in octets
+ * @auth_type: Authentication type (algorithm)
+ * @ie: IEs for association request
+ * @ie_len: Length of assoc_ie in octets
+ * @privacy: indicates whether privacy-enabled APs should be used
+ * @crypto: crypto settings
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
+ */
+struct cfg80211_connect_params {
+	struct ieee80211_channel *channel;
+	u8 *bssid;
+	u8 *ssid;
+	size_t ssid_len;
+	enum nl80211_auth_type auth_type;
+	u8 *ie;
+	size_t ie_len;
+	bool privacy;
+	struct cfg80211_crypto_settings crypto;
+	const u8 *key;
+	u8 key_len, key_idx;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
+ */
+enum wiphy_params_flags {
+	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
+	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
+	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
+	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
+	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
+};
+
+/*
+ * cfg80211_bitrate_mask - masks for bitrate control
+ */
+struct cfg80211_bitrate_mask {
+	struct {
+		u32 legacy;
+		/* TODO: add support for masking MCS rates; e.g.: */
+		/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
+	} control[IEEE80211_NUM_BANDS];
+};
+/**
+ * struct cfg80211_pmksa - PMK Security Association
+ *
+ * This structure is passed to the set/del_pmksa() method for PMKSA
+ * caching.
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: The PMK material itself.
+ */
+struct cfg80211_pmksa {
+	u8 *bssid;
+	u8 *pmkid;
+};
+
+/**
+ * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
+ * @mask: bitmask where to match pattern and where to ignore bytes,
+ *	one bit per byte, in same format as nl80211
+ * @pattern: bytes to match where bitmask is 1
+ * @pattern_len: length of pattern (in bytes)
+ *
+ * Internal note: @mask and @pattern are allocated in one chunk of
+ * memory, free @mask only!
+ */
+struct cfg80211_wowlan_trig_pkt_pattern {
+	u8 *mask, *pattern;
+	int pattern_len;
+};
+
+/**
+ * struct cfg80211_wowlan - Wake on Wireless-LAN support info
+ *
+ * This structure defines the enabled WoWLAN triggers for the device.
+ * @any: wake up on any activity -- special trigger if device continues
+ *	operating as normal during suspend
+ * @disconnect: wake up if getting disconnected
+ * @magic_pkt: wake up on receiving magic packet
+ * @patterns: wake up on receiving packet matching a pattern
+ * @n_patterns: number of patterns
+ * @gtk_rekey_failure: wake up on GTK rekey failure
+ * @eap_identity_req: wake up on EAP identity request packet
+ * @four_way_handshake: wake up on 4-way handshake
+ * @rfkill_release: wake up when rfkill is released
+ */
+struct cfg80211_wowlan {
+	bool any, disconnect, magic_pkt, gtk_rekey_failure,
+	     eap_identity_req, four_way_handshake,
+	     rfkill_release;
+	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+	int n_patterns;
+};
+
+/**
+ * struct cfg80211_gtk_rekey_data - rekey data
+ * @kek: key encryption key
+ * @kck: key confirmation key
+ * @replay_ctr: replay counter
+ */
+struct cfg80211_gtk_rekey_data {
+	u8 kek[NL80211_KEK_LEN];
+	u8 kck[NL80211_KCK_LEN];
+	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
+};
+
+/**
+ * struct cfg80211_ops - backend description for wireless configuration
+ *
+ * This struct is registered by fullmac card drivers and/or wireless stacks
+ * in order to handle configuration requests on their interfaces.
+ *
+ * All callbacks except where otherwise noted should return 0
+ * on success or a negative error code.
+ *
+ * All operations are currently invoked under rtnl for consistency with the
+ * wireless extensions but this is subject to reevaluation as soon as this
+ * code is used more widely and we have a first user without wext.
+ *
+ * @suspend: wiphy device needs to be suspended. The variable @wow will
+ *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
+ *	configured for the device.
+ * @resume: wiphy device needs to be resumed
+ *
+ * @add_virtual_intf: create a new virtual interface with the given name,
+ *	must set the struct wireless_dev's iftype. Beware: You must create
+ *	the new netdev in the wiphy's network namespace! Returns the netdev,
+ *	or an ERR_PTR.
+ *
+ * @del_virtual_intf: remove the virtual interface determined by ifindex.
+ *
+ * @change_virtual_intf: change type/configuration of virtual interface,
+ *	keep the struct wireless_dev's iftype updated.
+ *
+ * @add_key: add a key with the given parameters. @mac_addr will be %NULL
+ *	when adding a group key.
+ *
+ * @get_key: get information about the key with the given parameters.
+ *	@mac_addr will be %NULL when requesting information for a group
+ *	key. All pointers given to the @callback function need not be valid
+ *	after it returns. This function should return an error if it is
+ *	not possible to retrieve the key, -ENOENT if it doesn't exist.
+ *
+ * @del_key: remove a key given the @mac_addr (%NULL for a group key)
+ *	and @key_index, return -ENOENT if the key doesn't exist.
+ *
+ * @set_default_key: set the default key on an interface
+ *
+ * @set_default_mgmt_key: set the default management frame key on an interface
+ *
+ * @set_rekey_data: give the data necessary for GTK rekeying to the driver
+ *
+ * @add_beacon: Add a beacon with given parameters, @head, @interval
+ *	and @dtim_period will be valid, @tail is optional.
+ * @set_beacon: Change the beacon parameters for an access point mode
+ *	interface. This should reject the call when no beacon has been
+ *	configured.
+ * @del_beacon: Remove beacon configuration and stop sending the beacon.
+ *
+ * @add_station: Add a new station.
+ * @del_station: Remove a station; @mac may be NULL to remove all stations.
+ * @change_station: Modify a given station.
+ * @get_station: get station information for the station identified by @mac
+ * @dump_station: dump station callback -- resume dump at index @idx
+ *
+ * @add_mpath: add a fixed mesh path
+ * @del_mpath: delete a given mesh path
+ * @change_mpath: change a given mesh path
+ * @get_mpath: get a mesh path for the given parameters
+ * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @join_mesh: join the mesh network with the specified parameters
+ * @leave_mesh: leave the current mesh network
+ *
+ * @get_mesh_config: Get the current mesh configuration
+ *
+ * @update_mesh_config: Update mesh parameters on a running mesh.
+ *	The mask is a bitfield which tells us which parameters to
+ *	set, and which to leave alone.
+ *
+ * @change_bss: Modify parameters for a given BSS.
+ *
+ * @set_txq_params: Set TX queue parameters
+ *
+ * @set_channel: Set channel for a given wireless interface. Some devices
+ *	may support multi-channel operation (by channel hopping) so cfg80211
+ *	doesn't verify much. Note, however, that the passed netdev may be
+ *	%NULL as well if the user requested changing the channel for the
+ *	device itself, or for a monitor interface.
+ * @get_channel: Get the current operating channel, should return %NULL if
+ *	there's no single defined operating channel if for example the
+ *	device implements channel hopping for multi-channel virtual interfaces.
+ *
+ * @scan: Request to do a scan. If returning zero, the scan request is given
+ *	the driver, and will be valid until passed to cfg80211_scan_done().
+ *	For scan results, call cfg80211_inform_bss(); you can call this outside
+ *	the scan/scan_done bracket too.
+ *
+ * @auth: Request to authenticate with the specified peer
+ * @assoc: Request to (re)associate with the specified peer
+ * @deauth: Request to deauthenticate from the specified peer
+ * @disassoc: Request to disassociate from the specified peer
+ *
+ * @connect: Connect to the ESS with the specified parameters. When connected,
+ *	call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
+ *	If the connection fails for some reason, call cfg80211_connect_result()
+ *	with the status from the AP.
+ * @disconnect: Disconnect from the BSS/ESS.
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ *	cfg80211_ibss_joined(), also call that function when changing BSSID due
+ *	to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ *	@changed bitfield (see &enum wiphy_params_flags) describes which values
+ *	have changed. The actual parameter values are available in
+ *	struct wiphy. If returning an error, no value should be changed.
+ *
+ * @set_tx_power: set the transmit power according to the parameters
+ * @get_tx_power: store the current TX power into the dbm variable;
+ *	return 0 if successful
+ *
+ * @set_wds_peer: set the WDS peer for a WDS interface
+ *
+ * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
+ *	functions to adjust rfkill hw state
+ *
+ * @dump_survey: get site survey information.
+ *
+ * @remain_on_channel: Request the driver to remain awake on the specified
+ *	channel for the specified duration to complete an off-channel
+ *	operation (e.g., public action frame exchange). When the driver is
+ *	ready on the requested channel, it must indicate this with an event
+ *	notification by calling cfg80211_ready_on_channel().
+ * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
+ *	This allows the operation to be terminated prior to timeout based on
+ *	the duration value.
+ * @mgmt_tx: Transmit a management frame.
+ * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
+ *	frame on another channel
+ *
+ * @testmode_cmd: run a test mode command
+ * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
+ *	used by the function, but 0 and 1 must not be touched. Additionally,
+ *	return error codes other than -ENOBUFS and -ENOENT will terminate the
+ *	dump and return to userspace with an error, so be careful. If any data
+ *	was passed in from userspace then the data/len arguments will be present
+ *	and point to the data contained in %NL80211_ATTR_TESTDATA.
+ *
+ * @set_bitrate_mask: set the bitrate mask configuration
+ *
+ * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
+ *	devices running firmwares capable of generating the (re) association
+ *	RSN IE. It allows for faster roaming between WPA2 BSSIDs.
+ * @del_pmksa: Delete a cached PMKID.
+ * @flush_pmksa: Flush all cached PMKIDs.
+ * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
+ *	allows the driver to adjust the dynamic ps timeout value.
+ * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @sched_scan_start: Tell the driver to start a scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
+ *	scan.  The driver_initiated flag specifies whether the driver
+ *	itself has informed that the scan has stopped.
+ *
+ * @mgmt_frame_register: Notify driver that a management frame type was
+ *	registered. Note that this callback may not sleep, and cannot run
+ *	concurrently with itself.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @set_ringparam: Set tx and rx ring sizes.
+ *
+ * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
+ *
+ * @probe_client: probe an associated client, must return a cookie that it
+ *	later passes to cfg80211_probe_status().
+ *
+ * @notify_btcoex_inq_status: Notify the Bluetooth inquiry status in
+ *	case of a Bleutooth co-ex device.
+ *
+ * @notify_btcoex_sco_status: Notify the Bluetooth SCO connection status in
+ *	case of a Bluetooth co-ex device.
+ *
+ * @notify_btcoex_a2dp_status: Notify the Bluetooth A2DP connection status in
+ *	case of a Bluetooth co-ex device.
+ *
+ * @notify_btcoex_acl_info: Notify the Bluetooth chip's ACL connction
+ *	information
+ *
+ * @notify_btcoex_antenna_config: Notify the Bluetooth WiFi chip antenna
+ *	configuration
+ *
+ * @notify_btcoex_bt_vendor: Notify the Bluetooth chip vendor in case of using
+ *	different Bluetooth chip vendor
+ */
+
+struct cfg80211_ops {
+	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
+	int	(*resume)(struct wiphy *wiphy);
+
+	struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
+						char *name,
+						enum nl80211_iftype type,
+						u32 *flags,
+						struct vif_params *params);
+	int	(*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
+	int	(*change_virtual_intf)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       enum nl80211_iftype type, u32 *flags,
+				       struct vif_params *params);
+
+	int	(*add_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr,
+			   struct key_params *params);
+	int	(*get_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr,
+			   void *cookie,
+			   void (*callback)(void *cookie, struct key_params*));
+	int	(*del_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr);
+	int	(*set_default_key)(struct wiphy *wiphy,
+				   struct net_device *netdev,
+				   u8 key_index, bool unicast, bool multicast);
+	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
+					struct net_device *netdev,
+					u8 key_index);
+
+	int	(*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
+			      struct beacon_parameters *info);
+	int	(*set_beacon)(struct wiphy *wiphy, struct net_device *dev,
+			      struct beacon_parameters *info);
+	int	(*del_beacon)(struct wiphy *wiphy, struct net_device *dev);
+
+
+	int	(*add_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac, struct station_parameters *params);
+	int	(*del_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac);
+	int	(*change_station)(struct wiphy *wiphy, struct net_device *dev,
+				  u8 *mac, struct station_parameters *params);
+	int	(*get_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac, struct station_info *sinfo);
+	int	(*dump_station)(struct wiphy *wiphy, struct net_device *dev,
+			       int idx, u8 *mac, struct station_info *sinfo);
+
+	int	(*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst, u8 *next_hop);
+	int	(*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst);
+	int	(*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
+				  u8 *dst, u8 *next_hop);
+	int	(*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst, u8 *next_hop,
+			       struct mpath_info *pinfo);
+	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       int idx, u8 *dst, u8 *next_hop,
+			       struct mpath_info *pinfo);
+	int	(*get_mesh_config)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct mesh_config *conf);
+	int	(*update_mesh_config)(struct wiphy *wiphy,
+				      struct net_device *dev, u32 mask,
+				      const struct mesh_config *nconf);
+	int	(*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
+			     const struct mesh_config *conf,
+			     const struct mesh_setup *setup);
+	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
+			      struct bss_parameters *params);
+
+	int	(*set_txq_params)(struct wiphy *wiphy, struct net_device *dev,
+				  struct ieee80211_txq_params *params);
+
+	int	(*set_channel)(struct wiphy *wiphy, struct net_device *dev,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type);
+
+	int	(*scan)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request);
+
+	int	(*auth)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_auth_request *req);
+	int	(*assoc)(struct wiphy *wiphy, struct net_device *dev,
+			 struct cfg80211_assoc_request *req);
+	int	(*deauth)(struct wiphy *wiphy, struct net_device *dev,
+			  struct cfg80211_deauth_request *req,
+			  void *cookie);
+	int	(*disassoc)(struct wiphy *wiphy, struct net_device *dev,
+			    struct cfg80211_disassoc_request *req,
+			    void *cookie);
+
+	int	(*connect)(struct wiphy *wiphy, struct net_device *dev,
+			   struct cfg80211_connect_params *sme);
+	int	(*disconnect)(struct wiphy *wiphy, struct net_device *dev,
+			      u16 reason_code);
+
+	int	(*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+			     struct cfg80211_ibss_params *params);
+	int	(*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+
+	int	(*set_tx_power)(struct wiphy *wiphy,
+				enum nl80211_tx_power_setting type, int mbm);
+	int	(*get_tx_power)(struct wiphy *wiphy, int *dbm);
+
+	int	(*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *addr);
+
+	void	(*rfkill_poll)(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+	int	(*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+	int	(*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
+				 struct netlink_callback *cb,
+				 void *data, int len);
+#endif
+
+	int	(*set_bitrate_mask)(struct wiphy *wiphy,
+				    struct net_device *dev,
+				    const u8 *peer,
+				    const struct cfg80211_bitrate_mask *mask);
+
+	int	(*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
+			int idx, struct survey_info *info);
+
+	int	(*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+
+	int	(*remain_on_channel)(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     struct ieee80211_channel *chan,
+				     enum nl80211_channel_type channel_type,
+				     unsigned int duration,
+				     u64 *cookie);
+	int	(*cancel_remain_on_channel)(struct wiphy *wiphy,
+					    struct net_device *dev,
+					    u64 cookie);
+
+	int	(*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
+			  struct ieee80211_channel *chan, bool offchan,
+			  enum nl80211_channel_type channel_type,
+			  bool channel_type_valid, unsigned int wait,
+			  const u8 *buf, size_t len, bool no_cck,
+			  bool dont_wait_for_ack, u64 *cookie);
+	int	(*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       u64 cookie);
+
+	int	(*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+				  bool enabled, int timeout);
+
+	int	(*set_cqm_rssi_config)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       s32 rssi_thold, u32 rssi_hyst);
+
+	void	(*mgmt_frame_register)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       u16 frame_type, bool reg);
+
+	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
+	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
+
+	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
+	void	(*get_ringparam)(struct wiphy *wiphy,
+				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+
+	int	(*sched_scan_start)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct cfg80211_sched_scan_request *request);
+	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_gtk_rekey_data *data);
+
+	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, u8 action_code,  u8 dialog_token,
+			     u16 status_code, const u8 *buf, size_t len);
+	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, enum nl80211_tdls_operation oper);
+
+	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *peer, u64 *cookie);
+
+	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy);
+
+	int	(*notify_btcoex_inq_status)(struct wiphy *wiphy, bool status);
+	int	(*notify_btcoex_sco_status)(struct wiphy *wiphy,  bool status,
+					    bool esco, u32 tx_interval,
+					    u32 tx_pkt_len);
+	int	(*notify_btcoex_a2dp_status)(struct wiphy *wiphy, bool status);
+	int	(*notify_btcoex_acl_info)(struct wiphy *wiphy,
+					  enum nl80211_btcoex_acl_role role,
+					  u32 remote_lmp_ver);
+	int	(*notify_btcoex_antenna_config)(struct wiphy *wiphy,
+					  enum nl80211_btcoex_antenna_config);
+	int	(*notify_btcoex_bt_vendor)(struct wiphy *wiphy,
+					   enum nl80211_btcoex_vendor_list);
+	int	(*notify_btcoex)(struct wiphy *wiphy,
+					   u8 *buf, int len);
+	int	(*priv_cmd)(struct wiphy *wiphy, struct net_device *dev,
+			       char *priv_cmd);
+	int	(*notify_p2p_flush)(struct wiphy *wiphy);
+};
+
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY:  tells us the driver for this device
+ *	has its own custom regulatory domain and cannot identify the
+ *	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ *	we will disregard the first regulatory hint (when the
+ *	initiator is %REGDOM_SET_BY_CORE).
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ *	ignore regulatory domain settings until it gets its own regulatory
+ *	domain via its regulatory_hint() unless the regulatory hint is
+ *	from a country IE. After its gets its own regulatory domain it will
+ *	only allow further regulatory domain settings to further enhance
+ *	compliance. For example if channel 13 and 14 are disabled by this
+ *	regulatory domain no user regulatory domain can enable these channels
+ *	at a later time. This can be used for devices which do not have
+ *	calibration information guaranteed for frequencies or settings
+ *	outside of its regulatory domain.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ *	that passive scan flags and beaconing flags may not be lifted by
+ *	cfg80211 due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ *	wiphy at all
+ * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
+ *	combinations for this device. This flag is used for backward
+ *	compatibility only until all drivers advertise combinations and
+ *	they will always be enforced.
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ *	by default -- this flag will be set depending on the kernel's default
+ *	on wiphy_new(), but can be changed by the driver if it has a good
+ *	reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ *	on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
+ *	control port protocol ethertype. The device also honours the
+ *	control_port_no_encrypt flag.
+ * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
+ * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
+ *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
+ * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ *	firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ *	link setup/discovery operations internally. Setup, discovery and
+ *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ *	when there are virtual interfaces in AP mode by calling
+ *	cfg80211_report_obss_beacon().
+ * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
+ *	responds to probe-requests in hardware.
+ */
+enum wiphy_flags {
+	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
+	WIPHY_FLAG_STRICT_REGULATORY		= BIT(1),
+	WIPHY_FLAG_DISABLE_BEACON_HINTS		= BIT(2),
+	WIPHY_FLAG_NETNS_OK			= BIT(3),
+	WIPHY_FLAG_PS_ON_BY_DEFAULT		= BIT(4),
+	WIPHY_FLAG_4ADDR_AP			= BIT(5),
+	WIPHY_FLAG_4ADDR_STATION		= BIT(6),
+	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
+	WIPHY_FLAG_IBSS_RSN			= BIT(8),
+	WIPHY_FLAG_MESH_AUTH			= BIT(10),
+	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
+	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+	WIPHY_FLAG_SUPPORTS_FW_ROAM		= BIT(13),
+	WIPHY_FLAG_AP_UAPSD			= BIT(14),
+	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
+	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
+	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
+	WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD	= BIT(19),
+};
+
+/**
+ * struct ieee80211_iface_limit - limit on certain interface types
+ * @max: maximum number of interfaces of these types
+ * @types: interface types (bits)
+ */
+struct ieee80211_iface_limit {
+	u16 max;
+	u16 types;
+};
+
+/**
+ * struct ieee80211_iface_combination - possible interface combination
+ * @limits: limits for the given interface types
+ * @n_limits: number of limitations
+ * @num_different_channels: can use up to this many different channels
+ * @max_interfaces: maximum number of interfaces in total allowed in this
+ *	group
+ * @beacon_int_infra_match: In this combination, the beacon intervals
+ *	between infrastructure and AP types must match. This is required
+ *	only in special cases.
+ *
+ * These examples can be expressed as follows:
+ *
+ * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ *
+ *  struct ieee80211_iface_limit limits1[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
+ *  };
+ *  struct ieee80211_iface_combination combination1 = {
+ *	.limits = limits1,
+ *	.n_limits = ARRAY_SIZE(limits1),
+ *	.max_interfaces = 2,
+ *	.beacon_int_infra_match = true,
+ *  };
+ *
+ *
+ * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ *
+ *  struct ieee80211_iface_limit limits2[] = {
+ *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
+ *			     BIT(NL80211_IFTYPE_P2P_GO), },
+ *  };
+ *  struct ieee80211_iface_combination combination2 = {
+ *	.limits = limits2,
+ *	.n_limits = ARRAY_SIZE(limits2),
+ *	.max_interfaces = 8,
+ *	.num_different_channels = 1,
+ *  };
+ *
+ *
+ * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * This allows for an infrastructure connection and three P2P connections.
+ *
+ *  struct ieee80211_iface_limit limits3[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
+ *			     BIT(NL80211_IFTYPE_P2P_CLIENT), },
+ *  };
+ *  struct ieee80211_iface_combination combination3 = {
+ *	.limits = limits3,
+ *	.n_limits = ARRAY_SIZE(limits3),
+ *	.max_interfaces = 4,
+ *	.num_different_channels = 2,
+ *  };
+ */
+struct ieee80211_iface_combination {
+	const struct ieee80211_iface_limit *limits;
+	u32 num_different_channels;
+	u16 max_interfaces;
+	u8 n_limits;
+	bool beacon_int_infra_match;
+};
+
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
+struct ieee80211_txrx_stypes {
+	u16 tx, rx;
+};
+
+/**
+ * enum wiphy_wowlan_support_flags - WoWLAN support flags
+ * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
+ *	trigger that keeps the device operating as-is and
+ *	wakes up the host on any activity, for example a
+ *	received packet that passed filtering; note that the
+ *	packet should be preserved in that case
+ * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
+ *	(see nl80211.h)
+ * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
+ * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
+ * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
+ * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
+ * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
+ */
+enum wiphy_wowlan_support_flags {
+	WIPHY_WOWLAN_ANY		= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT		= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT		= BIT(2),
+	WIPHY_WOWLAN_SUPPORTS_GTK_REKEY	= BIT(3),
+	WIPHY_WOWLAN_GTK_REKEY_FAILURE	= BIT(4),
+	WIPHY_WOWLAN_EAP_IDENTITY_REQ	= BIT(5),
+	WIPHY_WOWLAN_4WAY_HANDSHAKE	= BIT(6),
+	WIPHY_WOWLAN_RFKILL_RELEASE	= BIT(7),
+};
+
+/**
+ * struct wiphy_wowlan_support - WoWLAN support data
+ * @flags: see &enum wiphy_wowlan_support_flags
+ * @n_patterns: number of supported wakeup patterns
+ *	(see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct wiphy_wowlan_support {
+	u32 flags;
+	int n_patterns;
+	int pattern_max_len;
+	int pattern_min_len;
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @reg_notifier: the driver's regulatory notification callback,
+ *	note that if your driver uses wiphy_apply_custom_regulatory()
+ *	the reg_notifier's request can be passed as NULL
+ * @regd: the driver's regulatory domain, if one was requested via
+ *	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ *	-1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ * @_net: the network namespace this wiphy currently lives in
+ * @perm_addr: permanent MAC address of this device
+ * @addr_mask: If the device supports multiple MAC addresses by masking,
+ *	set this to a mask with variable bits set to 1, e.g. if the last
+ *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	variable bits shall be determined by the interfaces added, with
+ *	interfaces not matching the mask being rejected to be brought up.
+ * @n_addresses: number of addresses in @addresses.
+ * @addresses: If the device has more than one address, set this pointer
+ *	to a list of addresses (6 bytes each). The first one will be used
+ *	by default for perm_addr. In this case, the mask should be set to
+ *	all-zeroes. In this case it is assumed that the device can handle
+ *	the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ *	unregister hardware
+ * @debugfsdir: debugfs directory used for this wiphy, will be renamed
+ *	automatically on wiphy renames
+ * @dev: (virtual) struct device for this wiphy
+ * @registered: helps synchronize suspend/resume with wiphy unregister
+ * @wext: wireless extension handlers
+ * @priv: driver private data (sized according to wiphy_new() parameter)
+ * @interface_modes: bitmask of interfaces types valid for this wiphy,
+ *	must be set by driver
+ * @iface_combinations: Valid interface combinations array, should not
+ *	list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ * @software_iftypes: bitmask of software interface types, these are not
+ *	subject to any restrictions since they are purely managed in SW.
+ * @flags: wiphy flags, see &enum wiphy_flags
+ * @features: features advertised to nl80211, see &enum nl80211_feature_flags.
+ * @bss_priv_size: each BSS struct has private data allocated with it,
+ *	this variable determines its size
+ * @max_scan_ssids: maximum number of SSIDs the device can scan for in
+ *	any given scan
+ * @max_sched_scan_ssids: maximum number of SSIDs the device can scan
+ *	for in any given scheduled scan
+ * @max_match_sets: maximum number of match sets the device can handle
+ *	when performing a scheduled scan, 0 if filtering is not
+ *	supported.
+ * @max_scan_ie_len: maximum length of user-controlled IEs device can
+ *	add to probe request frames transmitted during a scan, must not
+ *	include fixed IEs like supported rates
+ * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
+ *	scans
+ * @coverage_class: current coverage class
+ * @fw_version: firmware version for ethtool reporting
+ * @hw_version: hardware version for ethtool reporting
+ * @max_num_pmkids: maximum number of PMKIDs supported by device
+ * @privid: a pointer that drivers can use to identify if an arbitrary
+ *	wiphy is theirs, e.g. in global notifiers
+ * @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ *	transmitted through nl80211, points to an array indexed by interface
+ *	type
+ *
+ * @available_antennas_tx: bitmap of antennas which are available to be
+ *	configured as TX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_rx is set.
+ *
+ * @available_antennas_rx: bitmap of antennas which are available to be
+ *	configured as RX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_tx is set.
+ *
+ * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
+ *	may request, if implemented.
+ *
+ * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
+ */
+struct wiphy {
+	/* assign these fields before you register the wiphy */
+
+#define WIPHY_COMPAT_PAD_SIZE	2048
+	u8 padding[WIPHY_COMPAT_PAD_SIZE];
+
+	/* permanent MAC address(es) */
+	u8 perm_addr[ETH_ALEN];
+	u8 addr_mask[ETH_ALEN];
+
+	struct mac_address *addresses;
+
+	const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+	const struct ieee80211_iface_combination *iface_combinations;
+	int n_iface_combinations;
+	u16 software_iftypes;
+
+	u16 n_addresses;
+
+	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+	u16 interface_modes;
+
+	u32 flags, features;
+
+	u32 ap_sme_capa;
+
+	enum cfg80211_signal_type signal_type;
+
+	int bss_priv_size;
+	u8 max_scan_ssids;
+	u8 max_sched_scan_ssids;
+	u8 max_match_sets;
+	u16 max_scan_ie_len;
+	u16 max_sched_scan_ie_len;
+
+	int n_cipher_suites;
+	const u32 *cipher_suites;
+
+	u8 retry_short;
+	u8 retry_long;
+	u32 frag_threshold;
+	u32 rts_threshold;
+	u8 coverage_class;
+
+	char fw_version[ETHTOOL_BUSINFO_LEN];
+	u32 hw_version;
+
+	struct wiphy_wowlan_support wowlan;
+
+	u16 max_remain_on_channel_duration;
+
+	u8 max_num_pmkids;
+
+	u32 available_antennas_tx;
+	u32 available_antennas_rx;
+
+	/*
+	 * Bitmap of supported protocols for probe response offloading
+	 * see &enum nl80211_probe_resp_offload_support_attr. Only valid
+	 * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+	 */
+	u32 probe_resp_offload;
+
+	/* If multiple wiphys are registered and you're handed e.g.
+	 * a regular netdev with assigned ieee80211_ptr, you won't
+	 * know whether it points to a wiphy your driver has registered
+	 * or not. Assign this to something global to your driver to
+	 * help determine whether you own this wiphy or not. */
+	const void *privid;
+
+	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+	/* Lets us get back the wiphy on the callback */
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
+
+	/* fields below are read-only, assigned by cfg80211 */
+
+	const struct ieee80211_regdomain *regd;
+
+	/* the item in /sys/class/ieee80211/ points to this,
+	 * you need use set_wiphy_dev() (see below) */
+	struct device dev;
+
+	/* protects ->resume, ->suspend sysfs callbacks against unregister hw */
+	bool registered;
+
+	/* dir in debugfs: ieee80211/<wiphyname> */
+	struct dentry *debugfsdir;
+
+#ifdef CONFIG_NET_NS
+	/* the network namespace this phy lives in currently */
+	struct net *_net;
+#endif
+
+#ifdef CONFIG_CFG80211_WEXT
+	const struct iw_handler_def *wext;
+#endif
+
+	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+	return read_pnet(&wiphy->_net);
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+	write_pnet(&wiphy->_net, net);
+}
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+	BUG_ON(!wiphy);
+	return &wiphy->priv;
+}
+
+/**
+ * priv_to_wiphy - return the wiphy containing the priv
+ *
+ * @priv: a pointer previously returned by wiphy_priv
+ */
+static inline struct wiphy *priv_to_wiphy(void *priv)
+{
+	BUG_ON(!priv);
+	return container_of(priv, struct wiphy, priv);
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+	wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+	return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(const struct wiphy *wiphy)
+{
+	return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/* internal structs */
+struct cfg80211_conn;
+struct cfg80211_internal_bss;
+struct cfg80211_cached_keys;
+
+#define MAX_AUTH_BSSES		4
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @channel: (private) Used by the internal configuration code to track
+ *	user-set AP, monitor and WDS channels for wireless extensions
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @mesh_id_len: (private) Used by the internal configuration code
+ * @mesh_id_up_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ *	set by driver (if supported) on add_interface BEFORE registering the
+ *	netdev and may otherwise be used by driver read-only, will be update
+ *	by cfg80211 on change_interface
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
+ * @mtx: mutex used to lock data in this struct
+ * @cleanup_work: work struct used for cleanup that can't be done directly
+ * @beacon_interval: beacon interval used on this device for transmitting
+ *	beacons, 0 when not valid
+ */
+struct wireless_dev {
+	struct wiphy *wiphy;
+	enum nl80211_iftype iftype;
+
+	/* the remainder of this struct should be private to cfg80211 */
+	struct list_head list;
+	struct net_device *netdev;
+
+	struct list_head mgmt_registrations;
+	spinlock_t mgmt_registrations_lock;
+
+	struct mutex mtx;
+
+	struct work_struct cleanup_work;
+
+	bool use_4addr;
+
+	/* currently used for IBSS and SME - might be rearranged later */
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len, mesh_id_len, mesh_id_up_len;
+	enum {
+		CFG80211_SME_IDLE,
+		CFG80211_SME_CONNECTING,
+		CFG80211_SME_CONNECTED,
+	} sme_state;
+	struct cfg80211_conn *conn;
+	struct cfg80211_cached_keys *connect_keys;
+
+	struct list_head event_list;
+	spinlock_t event_lock;
+
+	struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
+	struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
+	struct cfg80211_internal_bss *current_bss; /* associated / joined */
+	struct ieee80211_channel *channel;
+
+	bool ps;
+	int ps_timeout;
+
+	int beacon_interval;
+
+	u32 ap_unexpected_nlpid;
+
+#ifdef CONFIG_CFG80211_WEXT
+	/* wext data */
+	struct {
+		struct cfg80211_ibss_params ibss;
+		struct cfg80211_connect_params connect;
+		struct cfg80211_cached_keys *keys;
+		u8 *ie;
+		size_t ie_len;
+		u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+		u8 ssid[IEEE80211_MAX_SSID_LEN];
+		s8 default_key, default_mgmt_key;
+		bool prev_bssid_valid;
+	} wext;
+#endif
+};
+
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+	BUG_ON(!wdev);
+	return wiphy_priv(wdev->wiphy);
+}
+
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ * @chan: channel number
+ * @band: band, necessary due to channel number overlap
+ */
+extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ * @freq: center frequency
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+							 int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ * @wiphy: the struct wiphy to get the channel for
+ * @freq: the center frequency of the channel
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+	return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+			    u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+struct radiotap_align_size {
+	uint8_t align:4, size:4;
+};
+
+struct ieee80211_radiotap_namespace {
+	const struct radiotap_align_size *align_size;
+	int n_bits;
+	uint32_t oui;
+	uint8_t subns;
+};
+
+struct ieee80211_radiotap_vendor_namespaces {
+	const struct ieee80211_radiotap_namespace *ns;
+	int n_ns;
+};
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @this_arg_index: index of current arg, valid after each successful call
+ *	to ieee80211_radiotap_iterator_next()
+ * @this_arg: pointer to current radiotap arg; it is valid after each
+ *	call to ieee80211_radiotap_iterator_next() but also after
+ *	ieee80211_radiotap_iterator_init() where it will point to
+ *	the beginning of the actual data portion
+ * @this_arg_size: length of the current arg, for convenience
+ * @current_namespace: pointer to the current namespace definition
+ *	(or internally %NULL if the current namespace is unknown)
+ * @is_radiotap_ns: indicates whether the current namespace is the default
+ *	radiotap namespace or not
+ *
+ * @_rtheader: pointer to the radiotap header we are walking through
+ * @_max_length: length of radiotap header in cpu byte ordering
+ * @_arg_index: next argument index
+ * @_arg: next argument pointer
+ * @_next_bitmap: internal pointer to next present u32
+ * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * @_vns: vendor namespace definitions
+ * @_next_ns_data: beginning of the next namespace's data
+ * @_reset_on_ext: internal; reset the arg index to 0 when going to the
+ *	next bitmap word
+ *
+ * Describes the radiotap parser state. Fields prefixed with an underscore
+ * must not be used by users of the parser, only by the parser internally.
+ */
+
+struct ieee80211_radiotap_iterator {
+	struct ieee80211_radiotap_header *_rtheader;
+	const struct ieee80211_radiotap_vendor_namespaces *_vns;
+	const struct ieee80211_radiotap_namespace *current_namespace;
+
+	unsigned char *_arg, *_next_ns_data;
+	__le32 *_next_bitmap;
+
+	unsigned char *this_arg;
+	int this_arg_index;
+	int this_arg_size;
+
+	int is_radiotap_ns;
+
+	int _max_length;
+	int _arg_index;
+	uint32_t _bitmap_shifter;
+	int _reset_on_ext;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+	struct ieee80211_radiotap_iterator *iterator,
+	struct ieee80211_radiotap_header *radiotap_header,
+	int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
+
+extern int ieee80211_radiotap_iterator_next(
+	struct ieee80211_radiotap_iterator *iterator);
+
+
+extern const unsigned char rfc1042_header[6];
+extern const unsigned char bridge_tunnel_header[6];
+
+/* Parsed Information Elements */
+struct ieee802_11_elems {
+	u8 *ie_start;
+	size_t total_len;
+
+	/* pointers to IEs */
+	u8 *ssid;
+	u8 *supp_rates;
+	u8 *fh_params;
+	u8 *ds_params;
+	u8 *cf_params;
+	struct ieee80211_tim_ie *tim;
+	u8 *ibss_params;
+	u8 *challenge;
+	u8 *wpa;
+	u8 *rsn;
+	u8 *erp_info;
+	u8 *ext_supp_rates;
+	u8 *wmm_info;
+	u8 *wmm_param;
+	struct ieee80211_ht_cap *ht_cap_elem;
+	struct ieee80211_ht_info *ht_info_elem;
+	struct ieee80211_meshconf_ie *mesh_config;
+	u8 *mesh_id;
+	u8 *peering;
+	u8 *preq;
+	u8 *prep;
+	u8 *perr;
+	struct ieee80211_rann_ie *rann;
+	u8 *ch_switch_elem;
+	u8 *country_elem;
+	u8 *pwr_constr_elem;
+	u8 *quiet_elem;	/* first quite element */
+	u8 *timeout_int;
+
+	/* length of them, respectively */
+	u8 ssid_len;
+	u8 supp_rates_len;
+	u8 fh_params_len;
+	u8 ds_params_len;
+	u8 cf_params_len;
+	u8 tim_len;
+	u8 ibss_params_len;
+	u8 challenge_len;
+	u8 wpa_len;
+	u8 rsn_len;
+	u8 erp_info_len;
+	u8 ext_supp_rates_len;
+	u8 wmm_info_len;
+	u8 wmm_param_len;
+	u8 mesh_id_len;
+	u8 peering_len;
+	u8 preq_len;
+	u8 prep_len;
+	u8 perr_len;
+	u8 ch_switch_elem_len;
+	u8 country_elem_len;
+	u8 pwr_constr_elem_len;
+	u8 quiet_elem_len;
+	u8 num_of_quiet_elem;	/* can be more the one */
+	u8 timeout_int_len;
+};
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
+
+/**
+ * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+ * @skb: the 802.11 data frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ */
+int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
+			   enum nl80211_iftype iftype);
+
+/**
+ * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
+ * @skb: the 802.3 frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ * @bssid: the network bssid (used only for iftype STATION and ADHOC)
+ * @qos: build 802.11 QoS data frame
+ */
+int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos);
+
+/**
+ * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
+ *
+ * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
+ * 802.3 frames. The @list will be empty if the decode fails. The
+ * @skb is consumed after the function returns.
+ *
+ * @skb: The input IEEE 802.11n A-MSDU frame.
+ * @list: The output list of 802.3 frames. It must be allocated and
+ *	initialized by by the caller.
+ * @addr: The device MAC address.
+ * @iftype: The device interface type.
+ * @extra_headroom: The hardware extra headroom for SKBs in the @list.
+ * @has_80211_header: Set it true if SKB is with IEEE 802.11 header.
+ */
+void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
+			      const u8 *addr, enum nl80211_iftype iftype,
+			      const unsigned int extra_headroom,
+			      bool has_80211_header);
+
+/**
+ * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
+ * @skb: the data frame
+ */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+
+/**
+ * cfg80211_find_ie - find information element in data
+ *
+ * @eid: element ID
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the element ID could
+ * not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
+
+/**
+ * cfg80211_find_vendor_ie - find vendor specific information element in data
+ *
+ * @oui: vendor OUI
+ * @oui_type: vendor-specific OUI type
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the vendor specific element ID
+ * could not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
+				  const u8 *ies, int len);
+
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ *	should be in. If @rd is set this should be NULL. Note that if you
+ *	set this to NULL you should still set rd->alpha2 to some accepted
+ *	alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ *	channel. Note that this is still 20 MHz if you want to use HT40
+ *	as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ *	If set to 0 we'll assume you want the standard 20 MHz.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy,
+			 u32 center_freq,
+			 u32 desired_bw_khz,
+			 const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
+
+/**
+ * cfg80211_scan_done - notify that scan finished
+ *
+ * @request: the corresponding scan request
+ * @aborted: set to true if the scan was aborted for any reason,
+ *	userspace will be notified of that
+ */
+void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
+
+/**
+ * cfg80211_sched_scan_results - notify that new scan results are available
+ *
+ * @wiphy: the wiphy which got scheduled scan results
+ */
+void cfg80211_sched_scan_results(struct wiphy *wiphy);
+
+/**
+ * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
+ *
+ * @wiphy: the wiphy on which the scheduled scan stopped
+ *
+ * The driver can call this function to inform cfg80211 that the
+ * scheduled scan had to be stopped, for whatever reason.  The driver
+ * is then called back via the sched_scan_stop operation when done.
+ */
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+
+/**
+ * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @channel: The channel the frame was received on
+ * @mgmt: the management frame (probe response or beacon)
+ * @len: length of the management frame
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ */
+struct cfg80211_bss * __must_check
+cfg80211_inform_bss_frame(struct wiphy *wiphy,
+			  struct ieee80211_channel *channel,
+			  struct ieee80211_mgmt *mgmt, size_t len,
+			  s32 signal, gfp_t gfp);
+
+/**
+ * cfg80211_inform_bss - inform cfg80211 of a new BSS
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @channel: The channel the frame was received on
+ * @bssid: the BSSID of the BSS
+ * @timestamp: the TSF timestamp sent by the peer
+ * @capability: the capability field sent by the peer
+ * @beacon_interval: the beacon interval announced by the peer
+ * @ie: additional IEs sent by the peer
+ * @ielen: length of the additional IEs
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ */
+struct cfg80211_bss * __must_check
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid,
+		    u64 timestamp, u16 capability, u16 beacon_interval,
+		    const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp);
+
+struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
+				      struct ieee80211_channel *channel,
+				      const u8 *bssid,
+				      const u8 *ssid, size_t ssid_len,
+				      u16 capa_mask, u16 capa_val);
+static inline struct cfg80211_bss *
+cfg80211_get_ibss(struct wiphy *wiphy,
+		  struct ieee80211_channel *channel,
+		  const u8 *ssid, size_t ssid_len)
+{
+	return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
+				WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+}
+
+struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
+				       struct ieee80211_channel *channel,
+				       const u8 *meshid, size_t meshidlen,
+				       const u8 *meshcfg);
+void cfg80211_put_bss(struct cfg80211_bss *bss);
+
+/**
+ * cfg80211_unlink_bss - unlink BSS from internal data structures
+ * @wiphy: the wiphy
+ * @bss: the bss to remove
+ *
+ * This function removes the given BSS from the internal data structures
+ * thereby making it no longer show up in scan results etc. Use this
+ * function when you detect a BSS is gone. Normally BSSes will also time
+ * out, so it is not necessary to use this function at all.
+ */
+void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
+
+void cfg80211_unlink_allbss(struct wiphy *wiphy);
+
+
+/**
+ * cfg80211_send_rx_auth - notification of processed authentication
+ * @dev: network device
+ * @buf: authentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever an authentication has been processed in
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call. This function may sleep.
+ */
+void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * This function may sleep.
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * When a pending authentication had no action yet, the driver may decide
+ * to not send a deauth frame, but in that case must calls this function
+ * to tell cfg80211 about this decision. It is only valid to call this
+ * function within the deauth() callback.
+ */
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_rx_assoc - notification of processed association
+ * @dev: network device
+ * @buf: (re)association response frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a (re)association response has been
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call. This function may sleep.
+ */
+void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ *
+ * This function may sleep.
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever deauthentication has been processed in
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones. This function may sleep.
+ */
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever disassociation has been processed in
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones. This function may sleep.
+ */
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
+	size_t len);
+
+/**
+ * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Deauthentication frame has been
+ * dropped in station mode because of MFP being used but the Deauthentication
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
+				 size_t len);
+
+/**
+ * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
+ * @dev: network device
+ * @buf: disassociation frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Disassociation frame has been
+ * dropped in station mode because of MFP being used but the Disassociation
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
+				   size_t len);
+
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3). Can be -1 if missing.
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ * @gfp: allocation flags
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc, gfp_t gfp);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
+/**
+ * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ *
+ * @dev: network device
+ * @macaddr: the MAC address of the new candidate
+ * @ie: information elements advertised by the peer candidate
+ * @ie_len: lenght of the information elements buffer
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the mesh peer candidate has been
+ * detected, most likely via a beacon or, less likely, via a probe response.
+ * cfg80211 then sends a notification to userspace.
+ */
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+		const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp);
+
+/**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
+ * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
+ * @wiphy: the wiphy
+ * @blocked: block status
+ */
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
+
+/**
+ * wiphy_rfkill_start_polling - start polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_start_polling(struct wiphy *wiphy);
+
+/**
+ * wiphy_rfkill_stop_polling - stop polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+/**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
+ * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ *	be put into the skb
+ *
+ * This function allocates and pre-fills an skb for a reply to
+ * the testmode command. Since it is intended for a reply, calling
+ * it outside of the @testmode_cmd operation is invalid.
+ *
+ * The returned skb (or %NULL if any errors happen) is pre-filled
+ * with the wiphy index and set up in a way that any data that is
+ * put into the skb (with skb_put(), nla_put() or similar) will end
+ * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
+ * needs to be done with the skb is adding data for the corresponding
+ * userspace tool which can then read that data out of the testdata
+ * attribute. You must not modify the skb in any other way.
+ *
+ * When done, call cfg80211_testmode_reply() with the skb and return
+ * its error code as the result of the @testmode_cmd operation.
+ */
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+						  int approxlen);
+
+/**
+ * cfg80211_testmode_reply - send the reply skb
+ * @skb: The skb, must have been allocated with
+ *	cfg80211_testmode_alloc_reply_skb()
+ *
+ * Returns an error code or 0 on success, since calling this
+ * function will usually be the last thing before returning
+ * from the @testmode_cmd you should return the error code.
+ * Note that this function consumes the skb regardless of the
+ * return value.
+ */
+int cfg80211_testmode_reply(struct sk_buff *skb);
+
+/**
+ * cfg80211_testmode_alloc_event_skb - allocate testmode event
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ *	be put into the skb
+ * @gfp: allocation flags
+ *
+ * This function allocates and pre-fills an skb for an event on the
+ * testmode multicast group.
+ *
+ * The returned skb (or %NULL if any errors happen) is set up in the
+ * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
+ * for an event. As there, you should simply add data to it that will
+ * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
+ * not modify the skb in any other way.
+ *
+ * When done filling the skb, call cfg80211_testmode_event() with the
+ * skb to send the event.
+ */
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+						  int approxlen, gfp_t gfp);
+
+/**
+ * cfg80211_testmode_event - send the event
+ * @skb: The skb, must have been allocated with
+ *	cfg80211_testmode_alloc_event_skb()
+ * @gfp: allocation flags
+ *
+ * This function sends the given @skb, which must have been allocated
+ * by cfg80211_testmode_alloc_event_skb(), as an event. It always
+ * consumes it.
+ */
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
+
+#define CFG80211_TESTMODE_CMD(cmd)	.testmode_cmd = (cmd),
+#define CFG80211_TESTMODE_DUMP(cmd)	.testmode_dump = (cmd),
+#else
+#define CFG80211_TESTMODE_CMD(cmd)
+#define CFG80211_TESTMODE_DUMP(cmd)
+#endif
+
+/**
+ * cfg80211_connect_result - notify cfg80211 of connection result
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @status: status code, 0 for successful connection, use
+ *	%WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
+ *	the real status code for failures.
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has
+ * succeeded.
+ */
+void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+			     const u8 *req_ie, size_t req_ie_len,
+			     const u8 *resp_ie, size_t resp_ie_len,
+			     u16 status, gfp_t gfp);
+
+/**
+ * cfg80211_roamed - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @channel: the channel of the new AP
+ * @bssid: the BSSID of the new AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever it roamed
+ * from one AP to another while connected.
+ */
+void cfg80211_roamed(struct net_device *dev,
+		     struct ieee80211_channel *channel,
+		     const u8 *bssid,
+		     const u8 *req_ie, size_t req_ie_len,
+		     const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_roamed_bss - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @bss: entry of bss to which STA got roamed
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * This is just a wrapper to notify cfg80211 of roaming event with driver
+ * passing bss to avoid a race in timeout of the bss entry. It should be
+ * called by the underlying driver whenever it roamed from one AP to another
+ * while connected. Drivers which have roaming implemented in firmware
+ * may use this function to avoid a race in bss entry timeout where the bss
+ * entry of the new AP is seen in the driver, but gets timed out by the time
+ * it is accessed in __cfg80211_roamed() due to delay in scheduling
+ * rdev->event_work. In case of any failures, the reference is released
+ * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise,
+ * it will be released while diconneting from the current bss.
+ */
+void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss,
+			 const u8 *req_ie, size_t req_ie_len,
+			 const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_disconnected - notify cfg80211 that connection was dropped
+ *
+ * @dev: network device
+ * @ie: information elements of the deauth/disassoc frame (may be %NULL)
+ * @ie_len: length of IEs
+ * @reason: reason code for the disconnection, set it to 0 if unknown
+ * @gfp: allocation flags
+ *
+ * After it calls this function, the driver should enter an idle state
+ * and not try to connect to any AP any more.
+ */
+void cfg80211_disconnected(struct net_device *dev, u16 reason,
+			   u8 *ie, size_t ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_ready_on_channel - notification of remain_on_channel start
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @duration: Duration in milliseconds that the driver intents to remain on the
+ *	channel
+ * @gfp: allocation flags
+ */
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type,
+			       unsigned int duration, gfp_t gfp);
+
+/**
+ * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @gfp: allocation flags
+ */
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+					u64 cookie,
+					struct ieee80211_channel *chan,
+					enum nl80211_channel_type channel_type,
+					gfp_t gfp);
+
+
+/**
+ * cfg80211_new_sta - notify userspace about station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information
+ * @gfp: allocation flags
+ */
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+		      struct station_info *sinfo, gfp_t gfp);
+
+/**
+ * cfg80211_del_sta - notify userspace about deletion of a station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+
+/**
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
+ * @dev: network device
+ * @freq: Frequency on which the frame was received in MHz
+ * @buf: Management frame (header + body)
+ * @len: length of the frame data
+ * @gfp: context flags
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
+ *
+ * This function is called whenever an Action frame is received for a station
+ * mode interface, but is not processed in kernel.
+ */
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+		      size_t len, gfp_t gfp);
+
+/**
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
+ * @dev: network device
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
+ * @len: length of the frame data
+ * @ack: Whether frame was acknowledged
+ * @gfp: context flags
+ *
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
+ * transmission attempt.
+ */
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+			     const u8 *buf, size_t len, bool ack, gfp_t gfp);
+
+
+/**
+ * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
+ * @dev: network device
+ * @rssi_event: the triggered RSSI event
+ * @gfp: context flags
+ *
+ * This function is called when a configured connection quality monitoring
+ * rssi threshold reached event occurs.
+ */
+void cfg80211_cqm_rssi_notify(struct net_device *dev,
+			      enum nl80211_cqm_rssi_threshold_event rssi_event,
+			      gfp_t gfp);
+
+/**
+ * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
+ * @dev: network device
+ * @peer: peer's MAC address
+ * @num_packets: how many packets were lost -- should be a fixed threshold
+ *	but probably no less than maybe 50, or maybe a throughput dependent
+ *	threshold (to account for temporary interference)
+ * @gfp: context flags
+ */
+void cfg80211_cqm_pktloss_notify(struct net_device *dev,
+				 const u8 *peer, u32 num_packets, gfp_t gfp);
+
+/**
+ * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
+ * @dev: network device
+ * @bssid: BSSID of AP (to avoid races)
+ * @replay_ctr: new replay counter
+ * @gfp: allocation flags
+ */
+void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
+			       const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate
+ * @dev: network device
+ * @index: candidate index (the smaller the index, the higher the priority)
+ * @bssid: BSSID of AP
+ * @preauth: Whether AP advertises support for RSN pre-authentication
+ * @gfp: allocation flags
+ */
+void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
+				     const u8 *bssid, bool preauth, gfp_t gfp);
+
+/**
+ * cfg80211_rx_spurious_frame - inform userspace about a spurious frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * a spurious class 3 frame was received, to be able to deauth the
+ * sender.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_spurious_frame(struct net_device *dev,
+				const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * an associated station sent a 4addr frame but that wasn't expected.
+ * It is allowed and desirable to send this event only once for each
+ * station to avoid event flooding.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
+					const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_probe_status - notify userspace about probe status
+ * @dev: the device the probe was sent on
+ * @addr: the address of the peer
+ * @cookie: the cookie filled in @probe_client previously
+ * @acked: indicates whether probe was acked or not
+ * @gfp: allocation flags
+ */
+void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
+			   u64 cookie, bool acked, gfp_t gfp);
+
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+				 const u8 *frame, size_t len,
+				 int freq, gfp_t gfp);
+
+/* Logging, debugging and troubleshooting/diagnostic helpers. */
+
+/* wiphy_printk helpers, similar to dev_printk */
+
+#define wiphy_printk(level, wiphy, format, args...)		\
+	dev_printk(level, &(wiphy)->dev, format, ##args)
+#define wiphy_emerg(wiphy, format, args...)			\
+	dev_emerg(&(wiphy)->dev, format, ##args)
+#define wiphy_alert(wiphy, format, args...)			\
+	dev_alert(&(wiphy)->dev, format, ##args)
+#define wiphy_crit(wiphy, format, args...)			\
+	dev_crit(&(wiphy)->dev, format, ##args)
+#define wiphy_err(wiphy, format, args...)			\
+	dev_err(&(wiphy)->dev, format, ##args)
+#define wiphy_warn(wiphy, format, args...)			\
+	dev_warn(&(wiphy)->dev, format, ##args)
+#define wiphy_notice(wiphy, format, args...)			\
+	dev_notice(&(wiphy)->dev, format, ##args)
+#define wiphy_info(wiphy, format, args...)			\
+	dev_info(&(wiphy)->dev, format, ##args)
+
+#define wiphy_debug(wiphy, format, args...)			\
+	wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
+
+#define wiphy_dbg(wiphy, format, args...)			\
+	dev_dbg(&(wiphy)->dev, format, ##args)
+
+#if defined(VERBOSE_DEBUG)
+#define wiphy_vdbg	wiphy_dbg
+#else
+#define wiphy_vdbg(wiphy, format, args...)				\
+({									\
+	if (0)								\
+		wiphy_printk(KERN_DEBUG, wiphy, format, ##args);	\
+	0;								\
+})
+#endif
+
+/*
+ * wiphy_WARN() acts like wiphy_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define wiphy_WARN(wiphy, format, args...)			\
+	WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args);
+
+#endif /* __NET_CFG80211_H */
diff --git a/include/compat/net/ieee80211_radiotap.h b/include/compat/net/ieee80211_radiotap.h
new file mode 100755
index 0000000..7139254
--- /dev/null
+++ b/include/compat/net/ieee80211_radiotap.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright (c) 2003, 2004 David Young.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of David Young may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
+ * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/*
+ * Modifications to fit into the linux IEEE 802.11 stack,
+ * Mike Kershaw (dragorn@kismetwireless.net)
+ */
+
+#ifndef IEEE80211RADIOTAP_H
+#define IEEE80211RADIOTAP_H
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+
+/* Base version of the radiotap packet header data */
+#define PKTHDR_RADIOTAP_VERSION		0
+
+/* A generic radio capture format is desirable. There is one for
+ * Linux, but it is neither rigidly defined (there were not even
+ * units given for some fields) nor easily extensible.
+ *
+ * I suggest the following extensible radio capture format. It is
+ * based on a bitmap indicating which fields are present.
+ *
+ * I am trying to describe precisely what the application programmer
+ * should expect in the following, and for that reason I tell the
+ * units and origin of each measurement (where it applies), or else I
+ * use sufficiently weaselly language ("is a monotonically nondecreasing
+ * function of...") that I cannot set false expectations for lawyerly
+ * readers.
+ */
+
+/*
+ * The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
+struct ieee80211_radiotap_header {
+	u8 it_version;		/* Version 0. Only increases
+				 * for drastic changes,
+				 * introduction of compatible
+				 * new fields does not count.
+				 */
+	u8 it_pad;
+	__le16 it_len;		/* length of the whole
+				 * header in bytes, including
+				 * it_version, it_pad,
+				 * it_len, and data fields.
+				 */
+	__le32 it_present;	/* A bitmap telling which
+				 * fields are present. Set bit 31
+				 * (0x80000000) to extend the
+				 * bitmap by another 32 bits.
+				 * Additional extensions are made
+				 * by setting bit 31.
+				 */
+} __packed;
+
+/* Name                                 Data type    Units
+ * ----                                 ---------    -----
+ *
+ * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
+ *
+ *      Value in microseconds of the MAC's 64-bit 802.11 Time
+ *      Synchronization Function timer when the first bit of the
+ *      MPDU arrived at the MAC. For received frames, only.
+ *
+ * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
+ *
+ *      Tx/Rx frequency in MHz, followed by flags (see below).
+ *
+ * IEEE80211_RADIOTAP_FHSS              __le16       see below
+ *
+ *      For frequency-hopping radios, the hop set (first byte)
+ *      and pattern (second byte).
+ *
+ * IEEE80211_RADIOTAP_RATE              u8           500kb/s
+ *
+ *      Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF signal power at the antenna, decibel difference from
+ *      one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF noise power at the antenna, decibel difference from one
+ *      milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
+ *
+ *      RF signal power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
+ *
+ *      RF noise power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference point.
+ *
+ * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
+ *
+ *      Quality of Barker code lock. Unitless. Monotonically
+ *      nondecreasing with "better" lock strength. Called "Signal
+ *      Quality" in datasheets.  (Is there a standard way to measure
+ *      this?)
+ *
+ * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
+ *
+ *      Transmit power expressed as unitless distance from max
+ *      power set at factory calibration.  0 is max power.
+ *      Monotonically nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
+ *
+ *      Transmit power expressed as decibel distance from max power
+ *      set at factory calibration.  0 is max power.  Monotonically
+ *      nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      Transmit power expressed as dBm (decibels from a 1 milliwatt
+ *      reference). This is the absolute power level measured at
+ *      the antenna port.
+ *
+ * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
+ *
+ *      Properties of transmitted and received frames. See flags
+ *      defined below.
+ *
+ * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
+ *
+ *      Unitless indication of the Rx/Tx antenna for this packet.
+ *      The first antenna is antenna 0.
+ *
+ * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
+ *
+ *     Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
+ *
+ *     Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
+ *
+ *     Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
+ *
+ *     Number of unicast retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_MCS	u8, u8, u8		unitless
+ *
+ *     Contains a bitmap of known fields/flags, the flags, and
+ *     the MCS index.
+ *
+ */
+enum ieee80211_radiotap_type {
+	IEEE80211_RADIOTAP_TSFT = 0,
+	IEEE80211_RADIOTAP_FLAGS = 1,
+	IEEE80211_RADIOTAP_RATE = 2,
+	IEEE80211_RADIOTAP_CHANNEL = 3,
+	IEEE80211_RADIOTAP_FHSS = 4,
+	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
+	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
+	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
+	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
+	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
+	IEEE80211_RADIOTAP_ANTENNA = 11,
+	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
+	IEEE80211_RADIOTAP_RX_FLAGS = 14,
+	IEEE80211_RADIOTAP_TX_FLAGS = 15,
+	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+
+	IEEE80211_RADIOTAP_MCS = 19,
+
+	/* valid in every it_present bitmap, even vendor namespaces */
+	IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
+	IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30,
+	IEEE80211_RADIOTAP_EXT = 31
+};
+
+/* Channel flags. */
+#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
+#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
+#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
+#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
+#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
+#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
+#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
+#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
+
+/* For IEEE80211_RADIOTAP_FLAGS */
+#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
+						 * during CFP
+						 */
+#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
+						 * with short
+						 * preamble
+						 */
+#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
+						 * with WEP encryption
+						 */
+#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
+						 * with fragmentation
+						 */
+#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
+#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
+						 * 802.11 header and payload
+						 * (to 32-bit boundary)
+						 */
+#define IEEE80211_RADIOTAP_F_BADFCS	0x40	/* bad FCS */
+
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADPLCP	0x0002	/* frame has bad PLCP */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
+						 * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
+#define IEEE80211_RADIOTAP_F_TX_NOACK	0x0008	/* don't expect an ack */
+
+
+/* For IEEE80211_RADIOTAP_MCS */
+#define IEEE80211_RADIOTAP_MCS_HAVE_BW		0x01
+#define IEEE80211_RADIOTAP_MCS_HAVE_MCS		0x02
+#define IEEE80211_RADIOTAP_MCS_HAVE_GI		0x04
+#define IEEE80211_RADIOTAP_MCS_HAVE_FMT		0x08
+#define IEEE80211_RADIOTAP_MCS_HAVE_FEC		0x10
+
+#define IEEE80211_RADIOTAP_MCS_BW_MASK		0x03
+#define		IEEE80211_RADIOTAP_MCS_BW_20	0
+#define		IEEE80211_RADIOTAP_MCS_BW_40	1
+#define		IEEE80211_RADIOTAP_MCS_BW_20L	2
+#define		IEEE80211_RADIOTAP_MCS_BW_20U	3
+#define IEEE80211_RADIOTAP_MCS_SGI		0x04
+#define IEEE80211_RADIOTAP_MCS_FMT_GF		0x08
+#define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
+
+
+/* helpers */
+static inline int ieee80211_get_radiotap_len(unsigned char *data)
+{
+	struct ieee80211_radiotap_header *hdr =
+		(struct ieee80211_radiotap_header *)data;
+
+	return get_unaligned_le16(&hdr->it_len);
+}
+
+#endif				/* IEEE80211_RADIOTAP_H */
diff --git a/include/compat/net/lib80211.h b/include/compat/net/lib80211.h
new file mode 100755
index 0000000..d178c26
--- /dev/null
+++ b/include/compat/net/lib80211.h
@@ -0,0 +1,124 @@
+/*
+ * lib80211.h -- common bits for IEEE802.11 wireless drivers
+ *
+ * Copyright (c) 2008, John W. Linville <linville@tuxdriver.com>
+ *
+ * Some bits copied from old ieee80211 component, w/ original copyright
+ * notices below:
+ *
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ */
+
+#ifndef LIB80211_H
+#define LIB80211_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/atomic.h>
+#include <linux/if.h>
+#include <linux/skbuff.h>
+#include <linux/ieee80211.h>
+#include <linux/timer.h>
+/* print_ssid() is intended to be used in debug (and possibly error)
+ * messages. It should never be used for passing ssid to user space. */
+const char *print_ssid(char *buf, const char *ssid, u8 ssid_len);
+#define DECLARE_SSID_BUF(var) char var[IEEE80211_MAX_SSID_LEN * 4 + 1] __maybe_unused
+
+#define NUM_WEP_KEYS	4
+
+enum {
+	IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
+};
+
+struct module;
+
+struct lib80211_crypto_ops {
+	const char *name;
+	struct list_head list;
+
+	/* init new crypto context (e.g., allocate private data space,
+	 * select IV, etc.); returns NULL on failure or pointer to allocated
+	 * private data on success */
+	void *(*init) (int keyidx);
+
+	/* deinitialize crypto context and free allocated private data */
+	void (*deinit) (void *priv);
+
+	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+	 * value from decrypt_mpdu is passed as the keyidx value for
+	 * decrypt_msdu. skb must have enough head and tail room for the
+	 * encryption; if not, error will be returned; these functions are
+	 * called for all MPDUs (i.e., fragments).
+	 */
+	int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
+	int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
+
+	/* These functions are called for full MSDUs, i.e. full frames.
+	 * These can be NULL if full MSDU operations are not needed. */
+	int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv);
+	int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len,
+			     void *priv);
+
+	int (*set_key) (void *key, int len, u8 * seq, void *priv);
+	int (*get_key) (void *key, int len, u8 * seq, void *priv);
+
+	/* procfs handler for printing out key information and possible
+	 * statistics */
+	char *(*print_stats) (char *p, void *priv);
+
+	/* Crypto specific flag get/set for configuration settings */
+	unsigned long (*get_flags) (void *priv);
+	unsigned long (*set_flags) (unsigned long flags, void *priv);
+
+	/* maximum number of bytes added by encryption; encrypt buf is
+	 * allocated with extra_prefix_len bytes, copy of in_buf, and
+	 * extra_postfix_len; encrypt need not use all this space, but
+	 * the result must start at the beginning of the buffer and correct
+	 * length must be returned */
+	int extra_mpdu_prefix_len, extra_mpdu_postfix_len;
+	int extra_msdu_prefix_len, extra_msdu_postfix_len;
+
+	struct module *owner;
+};
+
+struct lib80211_crypt_data {
+	struct list_head list;	/* delayed deletion list */
+	struct lib80211_crypto_ops *ops;
+	void *priv;
+	atomic_t refcnt;
+};
+
+struct lib80211_crypt_info {
+	char *name;
+	/* Most clients will already have a lock,
+	   so just point to that. */
+	spinlock_t *lock;
+
+	struct lib80211_crypt_data *crypt[NUM_WEP_KEYS];
+	int tx_keyidx;		/* default TX key index (crypt[tx_keyidx]) */
+	struct list_head crypt_deinit_list;
+	struct timer_list crypt_deinit_timer;
+	int crypt_quiesced;
+};
+
+int lib80211_crypt_info_init(struct lib80211_crypt_info *info, char *name,
+                                spinlock_t *lock);
+void lib80211_crypt_info_free(struct lib80211_crypt_info *info);
+int lib80211_register_crypto_ops(struct lib80211_crypto_ops *ops);
+int lib80211_unregister_crypto_ops(struct lib80211_crypto_ops *ops);
+struct lib80211_crypto_ops *lib80211_get_crypto_ops(const char *name);
+void lib80211_crypt_delayed_deinit(struct lib80211_crypt_info *info,
+				    struct lib80211_crypt_data **crypt);
+
+#endif /* LIB80211_H */
diff --git a/include/compat/net/mac80211.h b/include/compat/net/mac80211.h
new file mode 100755
index 0000000..c26795fc
--- /dev/null
+++ b/include/compat/net/mac80211.h
@@ -0,0 +1,3686 @@
+/*
+ * mac80211 <-> driver interface
+ *
+ * Copyright 2002-2005, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAC80211_H
+#define MAC80211_H
+
+#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/device.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include <asm/unaligned.h>
+
+/**
+ * DOC: Introduction
+ *
+ * mac80211 is the Linux stack for 802.11 hardware that implements
+ * only partial functionality in hard- or firmware. This document
+ * defines the interface between mac80211 and low-level hardware
+ * drivers.
+ */
+
+/**
+ * DOC: Calling mac80211 from interrupts
+ *
+ * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be
+ * called in hardware interrupt context. The low-level driver must not call any
+ * other functions in hardware interrupt context. If there is a need for such
+ * call, the low-level driver should first ACK the interrupt and perform the
+ * IEEE 802.11 code call after this, e.g. from a scheduled workqueue or even
+ * tasklet function.
+ *
+ * NOTE: If the driver opts to use the _irqsafe() functions, it may not also
+ *	 use the non-IRQ-safe functions!
+ */
+
+/**
+ * DOC: Warning
+ *
+ * If you're reading this document and not the header file itself, it will
+ * be incomplete because not all documentation has been converted yet.
+ */
+
+/**
+ * DOC: Frame format
+ *
+ * As a general rule, when frames are passed between mac80211 and the driver,
+ * they start with the IEEE 802.11 header and include the same octets that are
+ * sent over the air except for the FCS which should be calculated by the
+ * hardware.
+ *
+ * There are, however, various exceptions to this rule for advanced features:
+ *
+ * The first exception is for hardware encryption and decryption offload
+ * where the IV/ICV may or may not be generated in hardware.
+ *
+ * Secondly, when the hardware handles fragmentation, the frame handed to
+ * the driver from mac80211 is the MSDU, not the MPDU.
+ *
+ * Finally, for received frames, the driver is able to indicate that it has
+ * filled a radiotap header and put that in front of the frame; if it does
+ * not do so then mac80211 may add this under certain circumstances.
+ */
+
+/**
+ * DOC: mac80211 workqueue
+ *
+ * mac80211 provides its own workqueue for drivers and internal mac80211 use.
+ * The workqueue is a single threaded workqueue and can only be accessed by
+ * helpers for sanity checking. Drivers must ensure all work added onto the
+ * mac80211 workqueue should be cancelled on the driver stop() callback.
+ *
+ * mac80211 will flushed the workqueue upon interface removal and during
+ * suspend.
+ *
+ * All work performed on the mac80211 workqueue must not acquire the RTNL lock.
+ *
+ */
+
+/**
+ * enum ieee80211_max_queues - maximum number of queues
+ *
+ * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ */
+enum ieee80211_max_queues {
+	IEEE80211_MAX_QUEUES =		4,
+};
+
+/**
+ * enum ieee80211_ac_numbers - AC numbers as used in mac80211
+ * @IEEE80211_AC_VO: voice
+ * @IEEE80211_AC_VI: video
+ * @IEEE80211_AC_BE: best effort
+ * @IEEE80211_AC_BK: background
+ */
+enum ieee80211_ac_numbers {
+	IEEE80211_AC_VO		= 0,
+	IEEE80211_AC_VI		= 1,
+	IEEE80211_AC_BE		= 2,
+	IEEE80211_AC_BK		= 3,
+};
+#define IEEE80211_NUM_ACS	4
+
+/**
+ * struct ieee80211_tx_queue_params - transmit queue configuration
+ *
+ * The information provided in this structure is required for QoS
+ * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.
+ *
+ * @aifs: arbitration interframe space [0..255]
+ * @cw_min: minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @cw_max: maximum contention window [like @cw_min]
+ * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @uapsd: is U-APSD mode enabled for the queue
+ */
+struct ieee80211_tx_queue_params {
+	u16 txop;
+	u16 cw_min;
+	u16 cw_max;
+	u8 aifs;
+	bool uapsd;
+};
+
+struct ieee80211_low_level_stats {
+	unsigned int dot11ACKFailureCount;
+	unsigned int dot11RTSFailureCount;
+	unsigned int dot11FCSErrorCount;
+	unsigned int dot11RTSSuccessCount;
+};
+
+/**
+ * enum ieee80211_bss_change - BSS change notification flags
+ *
+ * These flags are used with the bss_info_changed() callback
+ * to indicate which BSS parameter changed.
+ *
+ * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated),
+ *	also implies a change in the AID.
+ * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed
+ * @BSS_CHANGED_ERP_PREAMBLE: preamble changed
+ * @BSS_CHANGED_ERP_SLOT: slot timing changed
+ * @BSS_CHANGED_HT: 802.11n parameters changed
+ * @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ *	reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ *	new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ *	enabled/disabled (beaconing modes)
+ * @BSS_CHANGED_CQM: Connection quality monitor config changed
+ * @BSS_CHANGED_IBSS: IBSS join status changed
+ * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
+ * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
+ *	that it is only ever disabled for station mode.
+ * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
+ * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
+ * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
+ */
+enum ieee80211_bss_change {
+	BSS_CHANGED_ASSOC		= 1<<0,
+	BSS_CHANGED_ERP_CTS_PROT	= 1<<1,
+	BSS_CHANGED_ERP_PREAMBLE	= 1<<2,
+	BSS_CHANGED_ERP_SLOT		= 1<<3,
+	BSS_CHANGED_HT			= 1<<4,
+	BSS_CHANGED_BASIC_RATES		= 1<<5,
+	BSS_CHANGED_BEACON_INT		= 1<<6,
+	BSS_CHANGED_BSSID		= 1<<7,
+	BSS_CHANGED_BEACON		= 1<<8,
+	BSS_CHANGED_BEACON_ENABLED	= 1<<9,
+	BSS_CHANGED_CQM			= 1<<10,
+	BSS_CHANGED_IBSS		= 1<<11,
+	BSS_CHANGED_ARP_FILTER		= 1<<12,
+	BSS_CHANGED_QOS			= 1<<13,
+	BSS_CHANGED_IDLE		= 1<<14,
+	BSS_CHANGED_SSID		= 1<<15,
+	BSS_CHANGED_AP_PROBE_RESP	= 1<<16,
+
+	/* when adding here, make sure to change ieee80211_reconfig */
+};
+
+/*
+ * The maximum number of IPv4 addresses listed for ARP filtering. If the number
+ * of addresses for an interface increase beyond this value, hardware ARP
+ * filtering will be disabled.
+ */
+#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
+
+/**
+ * enum ieee80211_rssi_event - RSSI threshold event
+ * An indicator for when RSSI goes below/above a certain threshold.
+ * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver.
+ * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver.
+ */
+enum ieee80211_rssi_event {
+	RSSI_EVENT_HIGH,
+	RSSI_EVENT_LOW,
+};
+
+/**
+ * struct ieee80211_bss_conf - holds the BSS's changing parameters
+ *
+ * This structure keeps information about a BSS (and an association
+ * to that BSS) that can change during the lifetime of the BSS.
+ *
+ * @assoc: association status
+ * @ibss_joined: indicates whether this station is part of an IBSS
+ *	or not
+ * @aid: association ID number, valid only when @assoc is true
+ * @use_cts_prot: use CTS protection
+ * @use_short_preamble: use 802.11b short preamble;
+ *	if the hardware cannot handle this it must set the
+ *	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
+ * @use_short_slot: use short slot time (only relevant for ERP);
+ *	if the hardware cannot handle this it must set the
+ *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
+ * @dtim_period: num of beacons before the next DTIM, for beaconing,
+ *	valid in station mode only while @assoc is true and if also
+ *	requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
+ *	@ps_dtim_period)
+ * @timestamp: beacon timestamp
+ * @beacon_int: beacon interval
+ * @assoc_capability: capabilities taken from assoc resp
+ * @basic_rates: bitmap of basic rates, each bit stands for an
+ *	index into the rate table configured by the driver in
+ *	the current band.
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
+ * @channel_type: Channel type for this BSS -- the hardware might be
+ *	configured for HT40+ while this BSS only uses no-HT, for
+ *	example.
+ * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ *	This field is only valid when the channel type is one of the HT types.
+ * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
+ *	implies disabled
+ * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
+ *	may filter ARP queries targeted for other addresses than listed here.
+ *	The driver must allow ARP queries targeted for all address listed here
+ *	to pass through. An empty list implies no ARP queries need to pass.
+ * @arp_addr_cnt: Number of addresses currently on the list.
+ * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
+ *	filter ARP queries based on the @arp_addr_list, if disabled, the
+ *	hardware must not perform any ARP filtering. Note, that the filter will
+ *	be enabled also in promiscuous mode.
+ * @qos: This is a QoS-enabled BSS.
+ * @idle: This interface is idle. There's also a global idle flag in the
+ *	hardware config which may be more appropriate depending on what
+ *	your driver/device needs to do.
+ * @ssid: The SSID of the current vif. Only valid in AP-mode.
+ * @ssid_len: Length of SSID given in @ssid.
+ * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
+ */
+struct ieee80211_bss_conf {
+	const u8 *bssid;
+	/* association related data */
+	bool assoc, ibss_joined;
+	u16 aid;
+	/* erp related data */
+	bool use_cts_prot;
+	bool use_short_preamble;
+	bool use_short_slot;
+	bool enable_beacon;
+	u8 dtim_period;
+	u16 beacon_int;
+	u16 assoc_capability;
+	u64 timestamp;
+	u32 basic_rates;
+	int mcast_rate[IEEE80211_NUM_BANDS];
+	u16 ht_operation_mode;
+	s32 cqm_rssi_thold;
+	u32 cqm_rssi_hyst;
+	enum nl80211_channel_type channel_type;
+	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+	u8 arp_addr_cnt;
+	bool arp_filter_enabled;
+	bool qos;
+	bool idle;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	size_t ssid_len;
+	bool hidden_ssid;
+};
+
+/**
+ * enum mac80211_tx_control_flags - flags to describe transmission information/status
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_info.
+ *
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
+ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ *	number to this frame, taking care of not overwriting the fragment
+ *	number and increasing the sequence number only when the
+ *	IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly
+ *	assign sequence numbers to QoS-data frames but cannot do so correctly
+ *	for non-QoS-data and management frames because beacons need them from
+ *	that counter as well and mac80211 cannot guarantee proper sequencing.
+ *	If this flag is set, the driver should instruct the hardware to
+ *	assign a sequence number to the frame or assign one itself. Cf. IEEE
+ *	802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+ *	beacons and always be clear for frames without a sequence number field.
+ * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
+ *	station
+ * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
+ * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
+ *	because the destination STA was in powersave mode. Note that to
+ *	avoid race conditions, the filter must be set by the hardware or
+ *	firmware upon receiving a frame that indicates that the station
+ *	went to sleep (must be done on device to filter frames already on
+ *	the queue) and may only be unset after mac80211 gives the OK for
+ *	that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above),
+ *	since only then is it guaranteed that no more frames are in the
+ *	hardware queue.
+ * @IEEE80211_TX_STAT_ACK: Frame was acknowledged
+ * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status
+ *	is for the whole aggregation.
+ * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
+ *	so consider using block ack request (BAR).
+ * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
+ *	set by rate control algorithms to indicate probe rate, will
+ *	be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
+ *	used to indicate that a pending frame requires TX processing before
+ *	it can be sent out.
+ * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
+ *	used to indicate that a frame was already retried due to PS
+ * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
+ *	used to indicate frame should not be encrypted
+ * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll
+ *	frame (PS-Poll or uAPSD) and should be sent although the station
+ *	is in powersave mode.
+ * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
+ *	transmit function after the current frame, this can be used
+ *	by drivers to kick the DMA queue only if unset or when the
+ *	queue gets full.
+ * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
+ *	after TX status because the destination was asleep, it must not
+ *	be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
+ *	MLME command (internal to mac80211 to figure out whether to send TX
+ *	status to user space)
+ * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
+ * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
+ *	frame and selects the maximum number of streams that it can use.
+ * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ *	the off-channel channel when a remain-on-channel offload is done
+ *	in hardware -- normal packets still flow and are expected to be
+ *	handled properly by the device.
+ * @IEEE80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP
+ *	testing. It will be sent out with incorrect Michael MIC key to allow
+ *	TKIP countermeasures to be tested.
+ * @IEEE80211_TX_CTL_NO_CCK_RATE: This frame will be sent at non CCK rate.
+ *	This flag is actually used for management frame especially for P2P
+ *	frames not being sent at CCK rate in 2GHz band.
+ * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period,
+ *	when its status is reported the service period ends. For frames in
+ *	an SP that mac80211 transmits, it is already set; for driver frames
+ *	the driver may set this flag. It is also used to do the same for
+ *	PS-Poll responses.
+ * @IEEE80211_TX_CTL_USE_MINRATE: This frame will be sent at lowest rate.
+ *	This flag is used to send nullfunc frame at minimum rate when
+ *	the nullfunc is used for connection monitoring purpose.
+ * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
+ *	would be fragmented by size (this is optional, only used for
+ *	monitor injection).
+ *
+ * Note: If you have to add new flags to the enumeration, then don't
+ *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
+ */
+enum mac80211_tx_control_flags {
+	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
+	IEEE80211_TX_CTL_ASSIGN_SEQ		= BIT(1),
+	IEEE80211_TX_CTL_NO_ACK			= BIT(2),
+	IEEE80211_TX_CTL_CLEAR_PS_FILT		= BIT(3),
+	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(4),
+	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(5),
+	IEEE80211_TX_CTL_AMPDU			= BIT(6),
+	IEEE80211_TX_CTL_INJECTED		= BIT(7),
+	IEEE80211_TX_STAT_TX_FILTERED		= BIT(8),
+	IEEE80211_TX_STAT_ACK			= BIT(9),
+	IEEE80211_TX_STAT_AMPDU			= BIT(10),
+	IEEE80211_TX_STAT_AMPDU_NO_BACK		= BIT(11),
+	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
+	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
+	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
+	IEEE80211_TX_INTFL_DONT_ENCRYPT		= BIT(16),
+	IEEE80211_TX_CTL_POLL_RESPONSE		= BIT(17),
+	IEEE80211_TX_CTL_MORE_FRAMES		= BIT(18),
+	IEEE80211_TX_INTFL_RETRANSMISSION	= BIT(19),
+	/* hole at 20, use later */
+	IEEE80211_TX_INTFL_NL80211_FRAME_TX	= BIT(21),
+	IEEE80211_TX_CTL_LDPC			= BIT(22),
+	IEEE80211_TX_CTL_STBC			= BIT(23) | BIT(24),
+	IEEE80211_TX_CTL_TX_OFFCHAN		= BIT(25),
+	IEEE80211_TX_INTFL_TKIP_MIC_FAILURE	= BIT(26),
+	IEEE80211_TX_CTL_NO_CCK_RATE		= BIT(27),
+	IEEE80211_TX_STATUS_EOSP		= BIT(28),
+	IEEE80211_TX_CTL_USE_MINRATE		= BIT(29),
+	IEEE80211_TX_CTL_DONTFRAG		= BIT(30),
+};
+
+#define IEEE80211_TX_CTL_STBC_SHIFT		23
+
+/*
+ * This definition is used as a mask to clear all temporary flags, which are
+ * set by the tx handlers for each transmission attempt by the mac80211 stack.
+ */
+#define IEEE80211_TX_TEMPORARY_FLAGS (IEEE80211_TX_CTL_NO_ACK |		      \
+	IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT |    \
+	IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU |	      \
+	IEEE80211_TX_STAT_TX_FILTERED |	IEEE80211_TX_STAT_ACK |		      \
+	IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK |	      \
+	IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE |   \
+	IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC |		      \
+	IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP)
+
+/**
+ * enum mac80211_rate_control_flags - per-rate flags set by the
+ *	Rate Control algorithm.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *	This is set if the current BSS requires ERP protection.
+ * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ *	Greenfield mode.
+ * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ *	adjacent 20 MHz channels, if the current channel type is
+ *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ */
+enum mac80211_rate_control_flags {
+	IEEE80211_TX_RC_USE_RTS_CTS		= BIT(0),
+	IEEE80211_TX_RC_USE_CTS_PROTECT		= BIT(1),
+	IEEE80211_TX_RC_USE_SHORT_PREAMBLE	= BIT(2),
+
+	/* rate index is an MCS rate number instead of an index */
+	IEEE80211_TX_RC_MCS			= BIT(3),
+	IEEE80211_TX_RC_GREEN_FIELD		= BIT(4),
+	IEEE80211_TX_RC_40_MHZ_WIDTH		= BIT(5),
+	IEEE80211_TX_RC_DUP_DATA		= BIT(6),
+	IEEE80211_TX_RC_SHORT_GI		= BIT(7),
+};
+
+
+/* there are 40 bytes if you don't need the rateset to be kept */
+#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40
+
+/* if you do need the rateset, then you have less space */
+#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
+
+/* maximum number of rate stages */
+#define IEEE80211_TX_MAX_RATES	5
+
+/**
+ * struct ieee80211_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @flags: rate control flags (&enum mac80211_rate_control_flags)
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate along with the flags it used.
+ *
+ * &struct ieee80211_tx_info contains an array of these structs
+ * in the control information, and it will be filled by the rate
+ * control algorithm according to what should be sent. For example,
+ * if this array contains, in the format { <idx>, <count> } the
+ * information
+ *    { 3, 2 }, { 2, 2 }, { 1, 4 }, { -1, 0 }, { -1, 0 }
+ * then this means that the frame should be transmitted
+ * up to twice at rate 3, up to twice at rate 2, and up to four
+ * times at rate 1 if it doesn't get acknowledged. Say it gets
+ * acknowledged by the peer after the fifth attempt, the status
+ * information should then contain
+ *   { 3, 2 }, { 2, 2 }, { 1, 1 }, { -1, 0 } ...
+ * since it was transmitted twice at rate 3, twice at rate 2
+ * and once at rate 1 after which we received an acknowledgement.
+ */
+struct ieee80211_tx_rate {
+	s8 idx;
+	u8 count;
+	u8 flags;
+} __packed;
+
+/**
+ * struct ieee80211_tx_info - skb transmit information
+ *
+ * This structure is placed in skb->cb for three uses:
+ *  (1) mac80211 TX control - mac80211 tells the driver what to do
+ *  (2) driver internal use (if applicable)
+ *  (3) TX status information - driver tells mac80211 what happened
+ *
+ * The TX control's sta pointer is only valid during the ->tx call,
+ * it may be NULL.
+ *
+ * @flags: transmit info flags, defined above
+ * @band: the band to transmit on (use for checking for races)
+ * @antenna_sel_tx: antenna to use, 0 for automatic diversity
+ * @ack_frame_id: internal frame ID for TX status, used internally
+ * @control: union for control data
+ * @status: union for status data
+ * @driver_data: array of driver_data pointers
+ * @ampdu_ack_len: number of acked aggregated frames.
+ *	relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * @ampdu_len: number of aggregated frames.
+ *	relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * @ack_signal: signal strength of the ACK frame
+ */
+struct ieee80211_tx_info {
+	/* common information */
+	u32 flags;
+	u8 band;
+
+	u8 antenna_sel_tx;
+
+	u16 ack_frame_id;
+
+	union {
+		struct {
+			union {
+				/* rate control */
+				struct {
+					struct ieee80211_tx_rate rates[
+						IEEE80211_TX_MAX_RATES];
+					s8 rts_cts_rate_idx;
+				};
+				/* only needed before rate control */
+				unsigned long jiffies;
+			};
+			/* NB: vif can be NULL for injected frames */
+			struct ieee80211_vif *vif;
+			struct ieee80211_key_conf *hw_key;
+			struct ieee80211_sta *sta;
+		} control;
+		struct {
+			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
+			u8 ampdu_ack_len;
+			int ack_signal;
+			u8 ampdu_len;
+			/* 15 bytes free */
+		} status;
+		struct {
+			struct ieee80211_tx_rate driver_rates[
+				IEEE80211_TX_MAX_RATES];
+			void *rate_driver_data[
+				IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
+		};
+		void *driver_data[
+			IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
+	};
+};
+
+/**
+ * struct ieee80211_sched_scan_ies - scheduled scan IEs
+ *
+ * This structure is used to pass the appropriate IEs to be used in scheduled
+ * scans for all bands.  It contains both the IEs passed from the userspace
+ * and the ones generated by mac80211.
+ *
+ * @ie: array with the IEs for each supported band
+ * @len: array with the total length of the IEs for each band
+ */
+struct ieee80211_sched_scan_ies {
+	u8 *ie[IEEE80211_NUM_BANDS];
+	size_t len[IEEE80211_NUM_BANDS];
+};
+
+static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
+{
+	return (struct ieee80211_tx_info *)skb->cb;
+}
+
+static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb)
+{
+	return (struct ieee80211_rx_status *)skb->cb;
+}
+
+/**
+ * ieee80211_tx_info_clear_status - clear TX status
+ *
+ * @info: The &struct ieee80211_tx_info to be cleared.
+ *
+ * When the driver passes an skb back to mac80211, it must report
+ * a number of things in TX status. This function clears everything
+ * in the TX status but the rate control information (it does clear
+ * the count since you need to fill that in anyway).
+ *
+ * NOTE: You can only use this function if you do NOT use
+ *	 info->driver_data! Use info->rate_driver_data
+ *	 instead if you need only the less space that allows.
+ */
+static inline void
+ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
+{
+	int i;
+
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+		     offsetof(struct ieee80211_tx_info, control.rates));
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+		     offsetof(struct ieee80211_tx_info, driver_rates));
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8);
+	/* clear the rate counts */
+	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
+		info->status.rates[i].count = 0;
+
+	BUILD_BUG_ON(
+	    offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+	memset(&info->status.ampdu_ack_len, 0,
+	       sizeof(struct ieee80211_tx_info) -
+	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+}
+
+
+/**
+ * enum mac80211_rx_flags - receive flags
+ *
+ * These flags are used with the @flag member of &struct ieee80211_rx_status.
+ * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
+ *	Use together with %RX_FLAG_MMIC_STRIPPED.
+ * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
+ * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
+ *	verification has been done by the hardware.
+ * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ *	If this flag is set, the stack cannot do any replay detection
+ *	hence the driver or hardware will have to do that.
+ * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
+ *	the frame.
+ * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
+ *	the frame.
+ * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ *	field) is valid and contains the time the first symbol of the MPDU
+ *	was received. This is useful in monitor mode and for proper IBSS
+ *	merging.
+ * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
+ * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_FLAG_SHORT_GI: Short guard interval was used
+ */
+enum mac80211_rx_flags {
+	RX_FLAG_MMIC_ERROR	= 1<<0,
+	RX_FLAG_DECRYPTED	= 1<<1,
+	RX_FLAG_MMIC_STRIPPED	= 1<<3,
+	RX_FLAG_IV_STRIPPED	= 1<<4,
+	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
+	RX_FLAG_FAILED_PLCP_CRC = 1<<6,
+	RX_FLAG_MACTIME_MPDU	= 1<<7,
+	RX_FLAG_SHORTPRE	= 1<<8,
+	RX_FLAG_HT		= 1<<9,
+	RX_FLAG_40MHZ		= 1<<10,
+	RX_FLAG_SHORT_GI	= 1<<11,
+};
+
+/**
+ * struct ieee80211_rx_status - receive status
+ *
+ * The low-level driver should provide this information (the subset
+ * supported by hardware) to the 802.11 code with each received
+ * frame, in the skb's control buffer (cb).
+ *
+ * @mactime: value in microseconds of the 64-bit Time Synchronization Function
+ *	(TSF) timer when the first data symbol (MPDU) arrived at the hardware.
+ * @band: the active band when this frame was received
+ * @freq: frequency the radio was tuned to when receiving this frame, in MHz
+ * @signal: signal strength when receiving this frame, either in dBm, in dB or
+ *	unspecified depending on the hardware capabilities flags
+ *	@IEEE80211_HW_SIGNAL_*
+ * @antenna: antenna used
+ * @rate_idx: index of data rate into band's supported rates or MCS index if
+ *	HT rates are use (RX_FLAG_HT)
+ * @flag: %RX_FLAG_*
+ * @rx_flags: internal RX flags for mac80211
+ */
+struct ieee80211_rx_status {
+	u64 mactime;
+	enum ieee80211_band band;
+	int freq;
+	int signal;
+	int antenna;
+	int rate_idx;
+	int flag;
+	unsigned int rx_flags;
+};
+
+/**
+ * enum ieee80211_conf_flags - configuration flags
+ *
+ * Flags to define PHY configuration options
+ *
+ * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
+ *	to determine for example whether to calculate timestamps for packets
+ *	or not, do not use instead of filter flags!
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only).
+ *	This is the power save mode defined by IEEE 802.11-2007 section 11.2,
+ *	meaning that the hardware still wakes up for beacons, is able to
+ *	transmit frames and receive the possible acknowledgment frames.
+ *	Not to be confused with hardware specific wakeup/sleep states,
+ *	driver is responsible for that. See the section "Powersave support"
+ *	for more.
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ *	the driver should be prepared to handle configuration requests but
+ *	may turn the device off as much as possible. Typically, this flag will
+ *	be set when an interface is set UP but not associated or scanning, but
+ *	it can also be unset in that case when monitor interfaces are active.
+ * @IEEE80211_CONF_OFFCHANNEL: The device is currently not on its main
+ *	operating channel.
+ */
+enum ieee80211_conf_flags {
+	IEEE80211_CONF_MONITOR		= (1<<0),
+	IEEE80211_CONF_PS		= (1<<1),
+	IEEE80211_CONF_IDLE		= (1<<2),
+	IEEE80211_CONF_OFFCHANNEL	= (1<<3),
+};
+
+
+/**
+ * enum ieee80211_conf_changed - denotes which configuration changed
+ *
+ * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
+ * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
+ * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
+ * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
+ */
+enum ieee80211_conf_changed {
+	IEEE80211_CONF_CHANGE_SMPS		= BIT(1),
+	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
+	IEEE80211_CONF_CHANGE_MONITOR		= BIT(3),
+	IEEE80211_CONF_CHANGE_PS		= BIT(4),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
+	IEEE80211_CONF_CHANGE_IDLE		= BIT(8),
+};
+
+/**
+ * enum ieee80211_smps_mode - spatial multiplexing power save mode
+ *
+ * @IEEE80211_SMPS_AUTOMATIC: automatic
+ * @IEEE80211_SMPS_OFF: off
+ * @IEEE80211_SMPS_STATIC: static
+ * @IEEE80211_SMPS_DYNAMIC: dynamic
+ * @IEEE80211_SMPS_NUM_MODES: internal, don't use
+ */
+enum ieee80211_smps_mode {
+	IEEE80211_SMPS_AUTOMATIC,
+	IEEE80211_SMPS_OFF,
+	IEEE80211_SMPS_STATIC,
+	IEEE80211_SMPS_DYNAMIC,
+
+	/* keep last */
+	IEEE80211_SMPS_NUM_MODES,
+};
+
+/**
+ * struct ieee80211_conf - configuration of the device
+ *
+ * This struct indicates how the driver shall configure the hardware.
+ *
+ * @flags: configuration flags defined above
+ *
+ * @listen_interval: listen interval in units of beacon interval
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
+ *	before checking the beacon for a TIM bit (managed mode only); this
+ *	value will be only achievable between DTIM frames, the hardware
+ *	needs to check for the multicast traffic bit in DTIM beacons.
+ *	This variable is valid only when the CONF_PS flag is set.
+ * @ps_dtim_period: The DTIM period of the AP we're connected to, for use
+ *	in power saving. Power saving will not be enabled until a beacon
+ *	has been received and the DTIM period is known.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ *	powersave documentation below. This variable is valid only when
+ *	the CONF_PS flag is set.
+ *
+ * @power_level: requested transmit power (in dBm)
+ *
+ * @channel: the channel to tune to
+ * @channel_type: the channel (HT) type
+ *
+ * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
+ *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
+ *    but actually means the number of transmissions not the number of retries
+ * @short_frame_max_tx_count: Maximum number of transmissions for a "short"
+ *    frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
+ *    number of transmissions not the number of retries
+ *
+ * @smps_mode: spatial multiplexing powersave mode; note that
+ *	%IEEE80211_SMPS_STATIC is used when the device is not
+ *	configured for an HT channel
+ */
+struct ieee80211_conf {
+	u32 flags;
+	int power_level, dynamic_ps_timeout;
+	int max_sleep_period;
+
+	u16 listen_interval;
+	u8 ps_dtim_period;
+
+	u8 long_frame_max_tx_count, short_frame_max_tx_count;
+
+	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
+	enum ieee80211_smps_mode smps_mode;
+};
+
+/**
+ * struct ieee80211_channel_switch - holds the channel switch data
+ *
+ * The information provided in this structure is required for channel switch
+ * operation.
+ *
+ * @timestamp: value in microseconds of the 64-bit Time Synchronization
+ *	Function (TSF) timer when the frame containing the channel switch
+ *	announcement was received. This is simply the rx.mactime parameter
+ *	the driver passed into mac80211.
+ * @block_tx: Indicates whether transmission must be blocked before the
+ *	scheduled channel switch, as indicated by the AP.
+ * @channel: the new channel to switch to
+ * @count: the number of TBTT's until the channel switch event
+ */
+struct ieee80211_channel_switch {
+	u64 timestamp;
+	bool block_tx;
+	struct ieee80211_channel *channel;
+	u8 count;
+};
+
+/**
+ * struct ieee80211_vif - per-interface data
+ *
+ * Data in this structure is continually present for driver
+ * use during the life of a virtual interface.
+ *
+ * @type: type of this virtual interface
+ * @bss_conf: BSS configuration for this interface, either our own
+ *	or the BSS we're associated to
+ * @addr: address of this interface
+ * @p2p: indicates whether this AP or STA interface is a p2p
+ *	interface, i.e. a GO or p2p-sta respectively
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *).
+ */
+struct ieee80211_vif {
+	enum nl80211_iftype type;
+	struct ieee80211_bss_conf bss_conf;
+	u8 addr[ETH_ALEN];
+	bool p2p;
+	/* must be last */
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
+{
+#ifdef CONFIG_MAC80211_MESH
+	return vif->type == NL80211_IFTYPE_MESH_POINT;
+#endif
+	return false;
+}
+
+/**
+ * enum ieee80211_key_flags - key flags
+ *
+ * These flags are used for communication about keys between the driver
+ * and mac80211, with the @flags parameter of &struct ieee80211_key_conf.
+ *
+ * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
+ *	that the STA this key will be used with could be using QoS.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
+ *	driver to indicate that it requires IV generation for this
+ *	particular key.
+ * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
+ *	the driver for a TKIP key if it requires Michael MIC
+ *	generation in software.
+ * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
+ *	that the key is pairwise rather then a shared key.
+ * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
+ *	be done in software.
+ * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
+ *	for a CCMP key if space should be prepared for the IV, but the IV
+ *	itself should not be generated. Do not set together with
+ *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
+ */
+enum ieee80211_key_flags {
+	IEEE80211_KEY_FLAG_WMM_STA	= 1<<0,
+	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
+	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
+	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
+	IEEE80211_KEY_FLAG_SW_MGMT	= 1<<4,
+	IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5,
+};
+
+/**
+ * struct ieee80211_key_conf - key information
+ *
+ * This key information is given by mac80211 to the driver by
+ * the set_key() callback in &struct ieee80211_ops.
+ *
+ * @hw_key_idx: To be set by the driver, this is the key index the driver
+ *	wants to be given when a frame is transmitted and needs to be
+ *	encrypted in hardware.
+ * @cipher: The key's cipher suite selector.
+ * @flags: key flags, see &enum ieee80211_key_flags.
+ * @keyidx: the key index (0-3)
+ * @keylen: key material length
+ * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte)
+ *	data block:
+ *	- Temporal Encryption Key (128 bits)
+ *	- Temporal Authenticator Tx MIC Key (64 bits)
+ *	- Temporal Authenticator Rx MIC Key (64 bits)
+ * @icv_len: The ICV length for this key type
+ * @iv_len: The IV length for this key type
+ */
+struct ieee80211_key_conf {
+	u32 cipher;
+	u8 icv_len;
+	u8 iv_len;
+	u8 hw_key_idx;
+	u8 flags;
+	s8 keyidx;
+	u8 keylen;
+	u8 key[0];
+};
+
+/**
+ * enum set_key_cmd - key command
+ *
+ * Used with the set_key() callback in &struct ieee80211_ops, this
+ * indicates whether a key is being removed or added.
+ *
+ * @SET_KEY: a key is set
+ * @DISABLE_KEY: a key must be disabled
+ */
+enum set_key_cmd {
+	SET_KEY, DISABLE_KEY,
+};
+
+/**
+ * struct ieee80211_sta - station table entry
+ *
+ * A station table entry represents a station we are possibly
+ * communicating with. Since stations are RCU-managed in
+ * mac80211, any ieee80211_sta pointer you get access to must
+ * either be protected by rcu_read_lock() explicitly or implicitly,
+ * or you must take good care to not use such a pointer after a
+ * call to your sta_remove callback that removed it.
+ *
+ * @addr: MAC address
+ * @aid: AID we assigned to the station if we're an AP
+ * @supp_rates: Bitmap of supported rates (per band)
+ * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
+ * @wme: indicates whether the STA supports WME. Only valid during AP-mode.
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *), size is determined in hw information.
+ * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
+ *	if wme is supported.
+ * @max_sp: max Service Period. Only valid if wme is supported.
+ */
+struct ieee80211_sta {
+	u32 supp_rates[IEEE80211_NUM_BANDS];
+	u8 addr[ETH_ALEN];
+	u16 aid;
+	struct ieee80211_sta_ht_cap ht_cap;
+	bool wme;
+	u8 uapsd_queues;
+	u8 max_sp;
+
+	/* must be last */
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
+ * enum sta_notify_cmd - sta notify command
+ *
+ * Used with the sta_notify() callback in &struct ieee80211_ops, this
+ * indicates if an associated station made a power state transition.
+ *
+ * @STA_NOTIFY_SLEEP: a station is now sleeping
+ * @STA_NOTIFY_AWAKE: a sleeping station woke up
+ */
+enum sta_notify_cmd {
+	STA_NOTIFY_SLEEP, STA_NOTIFY_AWAKE,
+};
+
+/**
+ * enum ieee80211_hw_flags - hardware flags
+ *
+ * These flags are used to indicate hardware capabilities to
+ * the stack. Generally, flags here should have their meaning
+ * done in a way that the simplest hardware doesn't need setting
+ * any particular flags. There are some exceptions to this rule,
+ * however, so you are advised to review these flags carefully.
+ *
+ * @IEEE80211_HW_HAS_RATE_CONTROL:
+ *	The hardware or firmware includes rate control, and cannot be
+ *	controlled by the stack. As such, no rate control algorithm
+ *	should be instantiated, and the TX rate reported to userspace
+ *	will be taken from the TX status instead of the rate control
+ *	algorithm.
+ *	Note that this requires that the driver implement a number of
+ *	callbacks so it has the correct information, it needs to have
+ *	the @set_rts_threshold callback and must look at the BSS config
+ *	@use_cts_prot for G/N protection, @use_short_slot for slot
+ *	timing in 2.4 GHz and @use_short_preamble for preambles for
+ *	CCK frames.
+ *
+ * @IEEE80211_HW_RX_INCLUDES_FCS:
+ *	Indicates that received frames passed to the stack include
+ *	the FCS at the end.
+ *
+ * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING:
+ *	Some wireless LAN chipsets buffer broadcast/multicast frames
+ *	for power saving stations in the hardware/firmware and others
+ *	rely on the host system for such buffering. This option is used
+ *	to configure the IEEE 802.11 upper layer to buffer broadcast and
+ *	multicast frames when there are power saving stations so that
+ *	the driver can fetch them with ieee80211_get_buffered_bc().
+ *
+ * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
+ *	Hardware is not capable of short slot operation on the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
+ *	Hardware is not capable of receiving frames with short preamble on
+ *	the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_SIGNAL_UNSPEC:
+ *	Hardware can provide signal values but we don't know its units. We
+ *	expect values between 0 and @max_signal.
+ *	If possible please provide dB or dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DBM:
+ *	Hardware gives signal values in dBm, decibel difference from
+ *	one milliwatt. This is the preferred method since it is standardized
+ *	between different devices. @max_signal does not need to be set.
+ *
+ * @IEEE80211_HW_SPECTRUM_MGMT:
+ *	Hardware supports spectrum management defined in 802.11h
+ *	Measurement, Channel Switch, Quieting, TPC
+ *
+ * @IEEE80211_HW_AMPDU_AGGREGATION:
+ *	Hardware supports 11n A-MPDU aggregation.
+ *
+ * @IEEE80211_HW_SUPPORTS_PS:
+ *	Hardware has power save support (i.e. can go to sleep).
+ *
+ * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ *	Hardware requires nullfunc frame handling in stack, implies
+ *	stack support for dynamic PS.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ *	Hardware has support for dynamic PS.
+ *
+ * @IEEE80211_HW_MFP_CAPABLE:
+ *	Hardware supports management frame protection (MFP, IEEE 802.11w).
+ *
+ * @IEEE80211_HW_BEACON_FILTER:
+ *	Hardware supports dropping of irrelevant beacon frames to
+ *	avoid waking up cpu.
+ *
+ * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
+ *	Hardware supports static spatial multiplexing powersave,
+ *	ie. can turn off all but one chain even on HT connections
+ *	that should be using more chains.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
+ *	Hardware supports dynamic spatial multiplexing powersave,
+ *	ie. can turn off all but one chain and then wake the rest
+ *	up as required after, for example, rts/cts handshake.
+ *
+ * @IEEE80211_HW_SUPPORTS_UAPSD:
+ *	Hardware supports Unscheduled Automatic Power Save Delivery
+ *	(U-APSD) in managed mode. The mode is configured with
+ *	conf_tx() operation.
+ *
+ * @IEEE80211_HW_REPORTS_TX_ACK_STATUS:
+ *	Hardware can provide ack status reports of Tx frames to
+ *	the stack.
+ *
+ * @IEEE80211_HW_CONNECTION_MONITOR:
+ *      The hardware performs its own connection monitoring, including
+ *      periodic keep-alives to the AP and probing the AP on beacon loss.
+ *      When this flag is set, signaling beacon-loss will cause an immediate
+ *      change to disassociated state.
+ *
+ * @IEEE80211_HW_SUPPORTS_CQM_RSSI:
+ *	Hardware can do connection quality monitoring - i.e. it can monitor
+ *	connection quality related parameters, such as the RSSI level and
+ *	provide notifications if configured trigger levels are reached.
+ *
+ * @IEEE80211_HW_NEED_DTIM_PERIOD:
+ *	This device needs to know the DTIM period for the BSS before
+ *	associating.
+ *
+ * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
+ *	per-station GTKs as used by IBSS RSN or during fast transition. If
+ *	the device doesn't support per-station GTKs, but can be asked not
+ *	to decrypt group addressed frames, then IBSS RSN support is still
+ *	possible but software crypto will be used. Advertise the wiphy flag
+ *	only in that case.
+ *
+ * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device
+ *	autonomously manages the PS status of connected stations. When
+ *	this flag is set mac80211 will not trigger PS mode for connected
+ *	stations based on the PM bit of incoming frames.
+ *	Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
+ *	the PS mode of connected stations.
+ *
+ * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session
+ *	setup strictly in HW. mac80211 should not attempt to do this in
+ *	software.
+ */
+enum ieee80211_hw_flags {
+	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
+	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
+	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
+	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
+	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
+	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
+	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
+	IEEE80211_HW_NEED_DTIM_PERIOD			= 1<<7,
+	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
+	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
+	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
+	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<11,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
+	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
+	IEEE80211_HW_BEACON_FILTER			= 1<<14,
+	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
+	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
+	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
+	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
+	IEEE80211_HW_SUPPORTS_CQM_RSSI			= 1<<20,
+	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
+	IEEE80211_HW_AP_LINK_PS				= 1<<22,
+	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
+};
+
+/**
+ * struct ieee80211_hw - hardware information and state
+ *
+ * This structure contains the configuration and hardware
+ * information for an 802.11 PHY.
+ *
+ * @wiphy: This points to the &struct wiphy allocated for this
+ *	802.11 PHY. You must fill in the @perm_addr and @dev
+ *	members of this structure using SET_IEEE80211_DEV()
+ *	and SET_IEEE80211_PERM_ADDR(). Additionally, all supported
+ *	bands (with channels, bitrates) are registered here.
+ *
+ * @conf: &struct ieee80211_conf, device configuration, don't use.
+ *
+ * @priv: pointer to private area that was allocated for driver use
+ *	along with this structure.
+ *
+ * @flags: hardware flags, see &enum ieee80211_hw_flags.
+ *
+ * @extra_tx_headroom: headroom to reserve in each transmit skb
+ *	for use by the driver (e.g. for transmit headers.)
+ *
+ * @channel_change_time: time (in microseconds) it takes to change channels.
+ *
+ * @max_signal: Maximum value for signal (rssi) in RX information, used
+ *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
+ *
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
+ *
+ * @queues: number of available hardware transmit queues for
+ *	data packets. WMM/QoS requires at least four, these
+ *	queues need to have configurable access parameters.
+ *
+ * @rate_control_algorithm: rate control algorithm for this hardware.
+ *	If unset (NULL), the default algorithm will be used. Must be
+ *	set before calling ieee80211_register_hw().
+ *
+ * @vif_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_vif.
+ * @sta_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_sta.
+ *
+ * @max_rates: maximum number of alternate rate retry stages the hw
+ *	can handle.
+ * @max_report_rates: maximum number of alternate rate retry stages
+ *	the hw can report back.
+ * @max_rate_tries: maximum number of tries for each stage
+ *
+ * @napi_weight: weight used for NAPI polling.  You must specify an
+ *	appropriate value here if a napi_poll operation is provided
+ *	by your driver.
+ *
+ * @max_rx_aggregation_subframes: maximum buffer size (number of
+ *	sub-frames) to be used for A-MPDU block ack receiver
+ *	aggregation.
+ *	This is only relevant if the device has restrictions on the
+ *	number of subframes, if it relies on mac80211 to do reordering
+ *	it shouldn't be set.
+ *
+ * @max_tx_aggregation_subframes: maximum number of subframes in an
+ *	aggregate an HT driver will transmit, used by the peer as a
+ *	hint to size its reorder buffer.
+ */
+struct ieee80211_hw {
+	struct ieee80211_conf conf;
+	struct wiphy *wiphy;
+	const char *rate_control_algorithm;
+	void *priv;
+	u32 flags;
+	unsigned int extra_tx_headroom;
+	int channel_change_time;
+	int vif_data_size;
+	int sta_data_size;
+	int napi_weight;
+	u16 queues;
+	u16 max_listen_interval;
+	s8 max_signal;
+	u8 max_rates;
+	u8 max_report_rates;
+	u8 max_rate_tries;
+	u8 max_rx_aggregation_subframes;
+	u8 max_tx_aggregation_subframes;
+};
+
+/**
+ * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ *
+ * @wiphy: the &struct wiphy which we want to query
+ *
+ * mac80211 drivers can use this to get to their respective
+ * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * structure can then access it via hw->priv. Note that mac802111 drivers should
+ * not use wiphy_priv() to try to get their private driver structure as this
+ * is already used internally by mac80211.
+ */
+struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+
+/**
+ * SET_IEEE80211_DEV - set device for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the device for
+ * @dev: the &struct device of this 802.11 device
+ */
+static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev)
+{
+	set_wiphy_dev(hw->wiphy, dev);
+}
+
+/**
+ * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the MAC address for
+ * @addr: the address to set
+ */
+static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
+{
+	memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
+		      const struct ieee80211_tx_info *c)
+{
+	if (WARN_ON(c->control.rates[0].idx < 0))
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
+			   const struct ieee80211_tx_info *c)
+{
+	if (c->control.rts_cts_rate_idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
+			     const struct ieee80211_tx_info *c, int idx)
+{
+	if (c->control.rates[idx + 1].idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx];
+}
+
+/**
+ * ieee80211_free_txskb - free TX skb
+ * @hw: the hardware
+ * @skb: the skb
+ *
+ * Free a transmit skb. Use this funtion when some failure
+ * to transmit happened and thus status cannot be reported.
+ */
+void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * DOC: Hardware crypto acceleration
+ *
+ * mac80211 is capable of taking advantage of many hardware
+ * acceleration designs for encryption and decryption operations.
+ *
+ * The set_key() callback in the &struct ieee80211_ops for a given
+ * device is called to enable hardware acceleration of encryption and
+ * decryption. The callback takes a @sta parameter that will be NULL
+ * for default keys or keys used for transmission only, or point to
+ * the station information for the peer for individual keys.
+ * Multiple transmission keys with the same key index may be used when
+ * VLANs are configured for an access point.
+ *
+ * When transmitting, the TX control data will use the @hw_key_idx
+ * selected by the driver by modifying the &struct ieee80211_key_conf
+ * pointed to by the @key parameter to the set_key() function.
+ *
+ * The set_key() call for the %SET_KEY command should return 0 if
+ * the key is now in use, -%EOPNOTSUPP or -%ENOSPC if it couldn't be
+ * added; if you return 0 then hw_key_idx must be assigned to the
+ * hardware key index, you are free to use the full u8 range.
+ *
+ * When the cmd is %DISABLE_KEY then it must succeed.
+ *
+ * Note that it is permissible to not decrypt a frame even if a key
+ * for it has been uploaded to hardware, the stack will not make any
+ * decision based on whether a key has been uploaded or not but rather
+ * based on the receive flags.
+ *
+ * The &struct ieee80211_key_conf structure pointed to by the @key
+ * parameter is guaranteed to be valid until another call to set_key()
+ * removes it, but it can only be used as a cookie to differentiate
+ * keys.
+ *
+ * In TKIP some HW need to be provided a phase 1 key, for RX decryption
+ * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key
+ * handler.
+ * The update_tkip_key() call updates the driver with the new phase 1 key.
+ * This happens every time the iv16 wraps around (every 65536 packets). The
+ * set_key() call will happen only once for each key (unless the AP did
+ * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
+ * provided by update_tkip_key only. The trigger that makes mac80211 call this
+ * handler is software decryption with wrap around of iv16.
+ */
+
+/**
+ * DOC: Powersave support
+ *
+ * mac80211 has support for various powersave implementations.
+ *
+ * First, it can support hardware that handles all powersaving by itself,
+ * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware
+ * flag. In that case, it will be told about the desired powersave mode
+ * with the %IEEE80211_CONF_PS flag depending on the association status.
+ * The hardware must take care of sending nullfunc frames when necessary,
+ * i.e. when entering and leaving powersave mode. The hardware is required
+ * to look at the AID in beacons and signal to the AP that it woke up when
+ * it finds traffic directed to it.
+ *
+ * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in
+ * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused
+ * with hardware wakeup and sleep states. Driver is responsible for waking
+ * up the hardware before issuing commands to the hardware and putting it
+ * back to sleep at appropriate times.
+ *
+ * When PS is enabled, hardware needs to wakeup for beacons and receive the
+ * buffered multicast/broadcast frames after the beacon. Also it must be
+ * possible to send frames and receive the acknowledment frame.
+ *
+ * Other hardware designs cannot send nullfunc frames by themselves and also
+ * need software support for parsing the TIM bitmap. This is also supported
+ * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
+ * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow to do that.
+ *
+ * Dynamic powersave is an extension to normal powersave in which the
+ * hardware stays awake for a user-specified period of time after sending a
+ * frame so that reply frames need not be buffered and therefore delayed to
+ * the next wakeup. It's compromise of getting good enough latency when
+ * there's data traffic and still saving significantly power in idle
+ * periods.
+ *
+ * Dynamic powersave is simply supported by mac80211 enabling and disabling
+ * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS
+ * flag and mac80211 will handle everything automatically. Additionally,
+ * hardware having support for the dynamic PS feature may set the
+ * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support
+ * dynamic PS mode itself. The driver needs to look at the
+ * @dynamic_ps_timeout hardware configuration value and use it that value
+ * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable
+ * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
+ * enabled whenever user has enabled powersave.
+ *
+ * Some hardware need to toggle a single shared antenna between WLAN and
+ * Bluetooth to facilitate co-existence. These types of hardware set
+ * limitations on the use of host controlled dynamic powersave whenever there
+ * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the
+ * driver may request temporarily going into full power save, in order to
+ * enable toggling the antenna between BT and WLAN. If the driver requests
+ * disabling dynamic powersave, the @dynamic_ps_timeout value will be
+ * temporarily set to zero until the driver re-enables dynamic powersave.
+ *
+ * Driver informs U-APSD client support by enabling
+ * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
+ * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
+ * Nullfunc frames and stay awake until the service period has ended. To
+ * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
+ * from that AC are transmitted with powersave enabled.
+ *
+ * Note: U-APSD client mode is not yet supported with
+ * %IEEE80211_HW_PS_NULLFUNC_STACK.
+ */
+
+/**
+ * DOC: Beacon filter support
+ *
+ * Some hardware have beacon filter support to reduce host cpu wakeups
+ * which will reduce system power consumption. It usuallly works so that
+ * the firmware creates a checksum of the beacon but omits all constantly
+ * changing elements (TSF, TIM etc). Whenever the checksum changes the
+ * beacon is forwarded to the host, otherwise it will be just dropped. That
+ * way the host will only receive beacons where some relevant information
+ * (for example ERP protection or WMM settings) have changed.
+ *
+ * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * hardware capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ *  - a list of information element IDs
+ *  - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
+ */
+
+/**
+ * DOC: Spatial multiplexing power save
+ *
+ * SMPS (Spatial multiplexing power save) is a mechanism to conserve
+ * power in an 802.11n implementation. For details on the mechanism
+ * and rationale, please refer to 802.11 (as amended by 802.11n-2009)
+ * "11.2.3 SM power save".
+ *
+ * The mac80211 implementation is capable of sending action frames
+ * to update the AP about the station's SMPS mode, and will instruct
+ * the driver to enter the specific mode. It will also announce the
+ * requested SMPS mode during the association handshake. Hardware
+ * support for this feature is required, and can be indicated by
+ * hardware flags.
+ *
+ * The default mode will be "automatic", which nl80211/cfg80211
+ * defines to be dynamic SMPS in (regular) powersave, and SMPS
+ * turned off otherwise.
+ *
+ * To support this feature, the driver must set the appropriate
+ * hardware support flags, and handle the SMPS flag to the config()
+ * operation. It will then with this mechanism be instructed to
+ * enter the requested SMPS mode while associated to an HT AP.
+ */
+
+/**
+ * DOC: Frame filtering
+ *
+ * mac80211 requires to see many management frames for proper
+ * operation, and users may want to see many more frames when
+ * in monitor mode. However, for best CPU usage and power consumption,
+ * having as few frames as possible percolate through the stack is
+ * desirable. Hence, the hardware should filter as much as possible.
+ *
+ * To achieve this, mac80211 uses filter flags (see below) to tell
+ * the driver's configure_filter() function which frames should be
+ * passed to mac80211 and which should be filtered out.
+ *
+ * Before configure_filter() is invoked, the prepare_multicast()
+ * callback is invoked with the parameters @mc_count and @mc_list
+ * for the combined multicast address list of all virtual interfaces.
+ * It's use is optional, and it returns a u64 that is passed to
+ * configure_filter(). Additionally, configure_filter() has the
+ * arguments @changed_flags telling which flags were changed and
+ * @total_flags with the new flag states.
+ *
+ * If your device has no multicast address filters your driver will
+ * need to check both the %FIF_ALLMULTI flag and the @mc_count
+ * parameter to see whether multicast frames should be accepted
+ * or dropped.
+ *
+ * All unsupported flags in @total_flags must be cleared.
+ * Hardware does not support a flag if it is incapable of _passing_
+ * the frame to the stack. Otherwise the driver must ignore
+ * the flag, but not clear it.
+ * You must _only_ clear the flag (announce no support for the
+ * flag to mac80211) if you are not able to pass the packet type
+ * to the stack (so the hardware always filters it).
+ * So for example, you should clear @FIF_CONTROL, if your hardware
+ * always filters control frames. If your hardware always passes
+ * control frames to the kernel and is incapable of filtering them,
+ * you do _not_ clear the @FIF_CONTROL flag.
+ * This rule applies to all other FIF flags as well.
+ */
+
+/**
+ * DOC: AP support for powersaving clients
+ *
+ * In order to implement AP and P2P GO modes, mac80211 has support for
+ * client powersaving, both "legacy" PS (PS-Poll/null data) and uAPSD.
+ * There currently is no support for sAPSD.
+ *
+ * There is one assumption that mac80211 makes, namely that a client
+ * will not poll with PS-Poll and trigger with uAPSD at the same time.
+ * Both are supported, and both can be used by the same client, but
+ * they can't be used concurrently by the same client. This simplifies
+ * the driver code.
+ *
+ * The first thing to keep in mind is that there is a flag for complete
+ * driver implementation: %IEEE80211_HW_AP_LINK_PS. If this flag is set,
+ * mac80211 expects the driver to handle most of the state machine for
+ * powersaving clients and will ignore the PM bit in incoming frames.
+ * Drivers then use ieee80211_sta_ps_transition() to inform mac80211 of
+ * stations' powersave transitions. In this mode, mac80211 also doesn't
+ * handle PS-Poll/uAPSD.
+ *
+ * In the mode without %IEEE80211_HW_AP_LINK_PS, mac80211 will check the
+ * PM bit in incoming frames for client powersave transitions. When a
+ * station goes to sleep, we will stop transmitting to it. There is,
+ * however, a race condition: a station might go to sleep while there is
+ * data buffered on hardware queues. If the device has support for this
+ * it will reject frames, and the driver should give the frames back to
+ * mac80211 with the %IEEE80211_TX_STAT_TX_FILTERED flag set which will
+ * cause mac80211 to retry the frame when the station wakes up. The
+ * driver is also notified of powersave transitions by calling its
+ * @sta_notify callback.
+ *
+ * When the station is asleep, it has three choices: it can wake up,
+ * it can PS-Poll, or it can possibly start a uAPSD service period.
+ * Waking up is implemented by simply transmitting all buffered (and
+ * filtered) frames to the station. This is the easiest case. When
+ * the station sends a PS-Poll or a uAPSD trigger frame, mac80211
+ * will inform the driver of this with the @allow_buffered_frames
+ * callback; this callback is optional. mac80211 will then transmit
+ * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE
+ * on each frame. The last frame in the service period (or the only
+ * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to
+ * indicate that it ends the service period; as this frame must have
+ * TX status report it also sets %IEEE80211_TX_CTL_REQ_TX_STATUS.
+ * When TX status is reported for this frame, the service period is
+ * marked has having ended and a new one can be started by the peer.
+ *
+ * Another race condition can happen on some devices like iwlwifi
+ * when there are frames queued for the station and it wakes up
+ * or polls; the frames that are already queued could end up being
+ * transmitted first instead, causing reordering and/or wrong
+ * processing of the EOSP. The cause is that allowing frames to be
+ * transmitted to a certain station is out-of-band communication to
+ * the device. To allow this problem to be solved, the driver can
+ * call ieee80211_sta_block_awake() if frames are buffered when it
+ * is notified that the station went to sleep. When all these frames
+ * have been filtered (see above), it must call the function again
+ * to indicate that the station is no longer blocked.
+ *
+ * If the driver buffers frames in the driver for aggregation in any
+ * way, it must use the ieee80211_sta_set_buffered() call when it is
+ * notified of the station going to sleep to inform mac80211 of any
+ * TIDs that have frames buffered. Note that when a station wakes up
+ * this information is reset (hence the requirement to call it when
+ * informed of the station going to sleep). Then, when a service
+ * period starts for any reason, @release_buffered_frames is called
+ * with the number of frames to be released and which TIDs they are
+ * to come from. In this case, the driver is responsible for setting
+ * the EOSP (for uAPSD) and MORE_DATA bits in the released frames,
+ * to help the @more_data paramter is passed to tell the driver if
+ * there is more data on other TIDs -- the TIDs to release frames
+ * from are ignored since mac80211 doesn't know how many frames the
+ * buffers for those TIDs contain.
+ *
+ * If the driver also implement GO mode, where absence periods may
+ * shorten service periods (or abort PS-Poll responses), it must
+ * filter those response frames except in the case of frames that
+ * are buffered in the driver -- those must remain buffered to avoid
+ * reordering. Because it is possible that no frames are released
+ * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * to indicate to mac80211 that the service period ended anyway.
+ *
+ * Finally, if frames from multiple TIDs are released from mac80211
+ * but the driver might reorder them, it must clear & set the flags
+ * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
+ * and also take care of the EOSP and MORE_DATA bits in the frame.
+ * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ */
+
+/**
+ * enum ieee80211_filter_flags - hardware filter flags
+ *
+ * These flags determine what the filter in hardware should be
+ * programmed to let through and what should not be passed to the
+ * stack. It is always safe to pass more frames than requested,
+ * but this has negative impact on power consumption.
+ *
+ * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
+ *	think of the BSS as your network segment and then this corresponds
+ *	to the regular ethernet device promiscuous mode.
+ *
+ * @FIF_ALLMULTI: pass all multicast frames, this is used if requested
+ *	by the user or if the hardware is not capable of filtering by
+ *	multicast address.
+ *
+ * @FIF_FCSFAIL: pass frames with failed FCS (but you need to set the
+ *	%RX_FLAG_FAILED_FCS_CRC for them)
+ *
+ * @FIF_PLCPFAIL: pass frames with failed PLCP CRC (but you need to set
+ *	the %RX_FLAG_FAILED_PLCP_CRC for them
+ *
+ * @FIF_BCN_PRBRESP_PROMISC: This flag is set during scanning to indicate
+ *	to the hardware that it should not filter beacons or probe responses
+ *	by BSSID. Filtering them can greatly reduce the amount of processing
+ *	mac80211 needs to do and the amount of CPU wakeups, so you should
+ *	honour this flag if possible.
+ *
+ * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
+ *	is not set then only those addressed to this station.
+ *
+ * @FIF_OTHER_BSS: pass frames destined to other BSSes
+ *
+ * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only
+ *	those addressed to this station.
+ *
+ * @FIF_PROBE_REQ: pass probe request frames
+ */
+enum ieee80211_filter_flags {
+	FIF_PROMISC_IN_BSS	= 1<<0,
+	FIF_ALLMULTI		= 1<<1,
+	FIF_FCSFAIL		= 1<<2,
+	FIF_PLCPFAIL		= 1<<3,
+	FIF_BCN_PRBRESP_PROMISC	= 1<<4,
+	FIF_CONTROL		= 1<<5,
+	FIF_OTHER_BSS		= 1<<6,
+	FIF_PSPOLL		= 1<<7,
+	FIF_PROBE_REQ		= 1<<8,
+};
+
+/**
+ * enum ieee80211_ampdu_mlme_action - A-MPDU actions
+ *
+ * These flags are used with the ampdu_action() callback in
+ * &struct ieee80211_ops to indicate which action is needed.
+ *
+ * Note that drivers MUST be able to deal with a TX aggregation
+ * session being stopped even before they OK'ed starting it by
+ * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
+ * might receive the addBA frame and send a delBA right away!
+ *
+ * @IEEE80211_AMPDU_RX_START: start Rx aggregation
+ * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
+ * @IEEE80211_AMPDU_TX_START: start Tx aggregation
+ * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
+ */
+enum ieee80211_ampdu_mlme_action {
+	IEEE80211_AMPDU_RX_START,
+	IEEE80211_AMPDU_RX_STOP,
+	IEEE80211_AMPDU_TX_START,
+	IEEE80211_AMPDU_TX_STOP,
+	IEEE80211_AMPDU_TX_OPERATIONAL,
+};
+
+/**
+ * enum ieee80211_tx_sync_type - TX sync type
+ * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication
+ *	(and possibly also before direct probe)
+ * @IEEE80211_TX_SYNC_ASSOC: sync TX for association
+ * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame
+ *	(not implemented yet)
+ */
+enum ieee80211_tx_sync_type {
+	IEEE80211_TX_SYNC_AUTH,
+	IEEE80211_TX_SYNC_ASSOC,
+	IEEE80211_TX_SYNC_ACTION,
+};
+
+/**
+ * enum ieee80211_frame_release_type - frame release reason
+ * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
+ * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to
+ *	frame received on trigger-enabled AC
+ */
+enum ieee80211_frame_release_type {
+	IEEE80211_FRAME_RELEASE_PSPOLL,
+	IEEE80211_FRAME_RELEASE_UAPSD,
+};
+
+/**
+ * struct ieee80211_ops - callbacks from mac80211 to the driver
+ *
+ * This structure contains various callbacks that the driver may
+ * handle or, in some cases, must handle, for example to configure
+ * the hardware to a new channel or to transmit a frame.
+ *
+ * @tx: Handler that 802.11 module calls for each transmitted frame.
+ *	skb contains the buffer starting from the IEEE 802.11 header.
+ *	The low-level driver should send the frame out based on
+ *	configuration in the TX control data. This handler should,
+ *	preferably, never fail and stop queues appropriately, more
+ *	importantly, however, it must never fail for A-MPDU-queues.
+ *	This function should return NETDEV_TX_OK except in very
+ *	limited cases.
+ *	Must be implemented and atomic.
+ *
+ * @start: Called before the first netdevice attached to the hardware
+ *	is enabled. This should turn on the hardware and must turn on
+ *	frame reception (for possibly enabled monitor interfaces.)
+ *	Returns negative error codes, these may be seen in userspace,
+ *	or zero.
+ *	When the device is started it should not have a MAC address
+ *	to avoid acknowledging frames before a non-monitor device
+ *	is added.
+ *	Must be implemented and can sleep.
+ *
+ * @stop: Called after last netdevice attached to the hardware
+ *	is disabled. This should turn off the hardware (at least
+ *	it must turn off frame reception.)
+ *	May be called right after add_interface if that rejects
+ *	an interface. If you added any work onto the mac80211 workqueue
+ *	you should ensure to cancel it on this callback.
+ *	Must be implemented and can sleep.
+ *
+ * @suspend: Suspend the device; mac80211 itself will quiesce before and
+ *	stop transmitting and doing any other configuration, and then
+ *	ask the device to suspend. This is only invoked when WoWLAN is
+ *	configured, otherwise the device is deconfigured completely and
+ *	reconfigured at resume time.
+ *	The driver may also impose special conditions under which it
+ *	wants to use the "normal" suspend (deconfigure), say if it only
+ *	supports WoWLAN when the device is associated. In this case, it
+ *	must return 1 from this function.
+ *
+ * @resume: If WoWLAN was configured, this indicates that mac80211 is
+ *	now resuming its operation, after this the device must be fully
+ *	functional again. If this returns an error, the only way out is
+ *	to also unregister the device. If it returns 1, then mac80211
+ *	will also go through the regular complete restart on resume.
+ *
+ * @add_interface: Called when a netdevice attached to the hardware is
+ *	enabled. Because it is not called for monitor mode devices, @start
+ *	and @stop must be implemented.
+ *	The driver should perform any initialization it needs before
+ *	the device can be enabled. The initial configuration for the
+ *	interface is given in the conf parameter.
+ *	The callback may refuse to add an interface by returning a
+ *	negative error code (which will be seen in userspace.)
+ *	Must be implemented and can sleep.
+ *
+ * @change_interface: Called when a netdevice changes type. This callback
+ *	is optional, but only if it is supported can interface types be
+ *	switched while the interface is UP. The callback may sleep.
+ *	Note that while an interface is being switched, it will not be
+ *	found by the interface iteration callbacks.
+ *
+ * @remove_interface: Notifies a driver that an interface is going down.
+ *	The @stop callback is called after this if it is the last interface
+ *	and no monitor interfaces are present.
+ *	When all interfaces are removed, the MAC address in the hardware
+ *	must be cleared so the device no longer acknowledges packets,
+ *	the mac_addr member of the conf structure is, however, set to the
+ *	MAC address of the device going away.
+ *	Hence, this callback must be implemented. It can sleep.
+ *
+ * @config: Handler for configuration requests. IEEE 802.11 code calls this
+ *	function to change hardware configuration, e.g., channel.
+ *	This function should never fail but returns a negative error code
+ *	if it does. The callback can sleep.
+ *
+ * @bss_info_changed: Handler for configuration requests related to BSS
+ *	parameters that may vary during BSS's lifespan, and may affect low
+ *	level driver (e.g. assoc/disassoc status, erp parameters).
+ *	This function should not be used if no BSS has been set, unless
+ *	for association indication. The @changed parameter indicates which
+ *	of the bss parameters has changed when a call is made. The callback
+ *	can sleep.
+ *
+ * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the
+ *	driver should sync with the GO's powersaving so the device doesn't
+ *	transmit the frame while the GO is asleep. In the regular AP case
+ *	it may be used by drivers for devices implementing other restrictions
+ *	on talking to APs, e.g. due to regulatory enforcement or just HW
+ *	restrictions.
+ *	This function is called for every authentication, association and
+ *	action frame separately since applications might attempt to auth
+ *	with multiple APs before chosing one to associate to. If it returns
+ *	an error, the corresponding authentication, association or frame
+ *	transmission is aborted and reported as having failed. It is always
+ *	called after tuning to the correct channel.
+ *	The callback might be called multiple times before @finish_tx_sync
+ *	(but @finish_tx_sync will be called once for each) but in practice
+ *	this is unlikely to happen. It can also refuse in that case if the
+ *	driver cannot handle that situation.
+ *	This callback can sleep.
+ * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned
+ *	an error. This callback can sleep.
+ *
+ * @prepare_multicast: Prepare for multicast filter configuration.
+ *	This callback is optional, and its return value is passed
+ *	to configure_filter(). This callback must be atomic.
+ *
+ * @configure_filter: Configure the device's RX filter.
+ *	See the section "Frame filtering" for more information.
+ *	This callback must be implemented and can sleep.
+ *
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ *	must be set or cleared for a given STA. Must be atomic.
+ *
+ * @set_key: See the section "Hardware crypto acceleration"
+ *	This callback is only called between add_interface and
+ *	remove_interface calls, i.e. while the given virtual interface
+ *	is enabled.
+ *	Returns a negative error code if the key can't be added.
+ *	The callback can sleep.
+ *
+ * @update_tkip_key: See the section "Hardware crypto acceleration"
+ *	This callback will be called in the context of Rx. Called for drivers
+ *	which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
+ *	The callback must be atomic.
+ *
+ * @set_rekey_data: If the device supports GTK rekeying, for example while the
+ *	host is suspended, it can assign this callback to retrieve the data
+ *	necessary to do GTK rekeying, this is the KEK, KCK and replay counter.
+ *	After rekeying was done it should (for example during resume) notify
+ *	userspace of the new replay counter using ieee80211_gtk_rekey_notify().
+ *
+ * @hw_scan: Ask the hardware to service the scan request, no need to start
+ *	the scan state machine in stack. The scan must honour the channel
+ *	configuration done by the regulatory agent in the wiphy's
+ *	registered bands. The hardware (or the driver) needs to make sure
+ *	that power save is disabled.
+ *	The @req ie/ie_len members are rewritten by mac80211 to contain the
+ *	entire IEs after the SSID, so that drivers need not look at these
+ *	at all but just send them after the SSID -- mac80211 includes the
+ *	(extended) supported rates and HT information (where applicable).
+ *	When the scan finishes, ieee80211_scan_completed() must be called;
+ *	note that it also must be called when the scan cannot finish due to
+ *	any error unless this callback returned a negative error code.
+ *	The callback can sleep.
+ *
+ * @cancel_hw_scan: Ask the low-level tp cancel the active hw scan.
+ *	The driver should ask the hardware to cancel the scan (if possible),
+ *	but the scan will be completed only after the driver will call
+ *	ieee80211_scan_completed().
+ *	This callback is needed for wowlan, to prevent enqueueing a new
+ *	scan_work after the low-level driver was already suspended.
+ *	The callback can sleep.
+ *
+ * @sched_scan_start: Ask the hardware to start scanning repeatedly at
+ *	specific intervals.  The driver must call the
+ *	ieee80211_sched_scan_results() function whenever it finds results.
+ *	This process will continue until sched_scan_stop is called.
+ *
+ * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *
+ * @sw_scan_start: Notifier function that is called just before a software scan
+ *	is started. Can be NULL, if the driver doesn't need this notification.
+ *	The callback can sleep.
+ *
+ * @sw_scan_complete: Notifier function that is called just after a
+ *	software scan finished. Can be NULL, if the driver doesn't need
+ *	this notification.
+ *	The callback can sleep.
+ *
+ * @get_stats: Return low-level statistics.
+ *	Returns zero if statistics are available.
+ *	The callback can sleep.
+ *
+ * @get_tkip_seq: If your device implements TKIP encryption in hardware this
+ *	callback should be provided to read the TKIP transmit IVs (both IV32
+ *	and IV16) for the given key from hardware.
+ *	The callback must be atomic.
+ *
+ * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
+ *	if the device does fragmentation by itself; if this callback is
+ *	implemented then the stack will not do fragmentation.
+ *	The callback can sleep.
+ *
+ * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
+ *	The callback can sleep.
+ *
+ * @sta_add: Notifies low level driver about addition of an associated station,
+ *	AP, IBSS/WDS/mesh peer etc. This callback can sleep.
+ *
+ * @sta_remove: Notifies low level driver about removal of an associated
+ *	station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
+ *
+ * @sta_notify: Notifies low level driver about power state transition of an
+ *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
+ *	in AP mode, this callback will not be called when the flag
+ *	%IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
+ *
+ * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
+ *	bursting) for a hardware TX queue.
+ *	Returns a negative error code on failure.
+ *	The callback can sleep.
+ *
+ * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
+ *	this is only used for IBSS mode BSSID merging and debugging. Is not a
+ *	required function.
+ *	The callback can sleep.
+ *
+ * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
+ *      Currently, this is only used for IBSS mode debugging. Is not a
+ *	required function.
+ *	The callback can sleep.
+ *
+ * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
+ *	with other STAs in the IBSS. This is only used in IBSS mode. This
+ *	function is optional if the firmware/hardware takes full care of
+ *	TSF synchronization.
+ *	The callback can sleep.
+ *
+ * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
+ *	This is needed only for IBSS mode and the result of this function is
+ *	used to determine whether to reply to Probe Requests.
+ *	Returns non-zero if this device sent the last beacon.
+ *	The callback can sleep.
+ *
+ * @ampdu_action: Perform a certain A-MPDU action
+ *	The RA/TID combination determines the destination and TID we want
+ *	the ampdu action to be performed for. The action is defined through
+ *	ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
+ *	is the first frame we expect to perform the action on. Notice
+ *	that TX/RX_STOP can pass NULL for this parameter.
+ *	The @buf_size parameter is only valid when the action is set to
+ *	%IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
+ *	buffer size (number of subframes) for this session -- the driver
+ *	may neither send aggregates containing more subframes than this
+ *	nor send aggregates in a way that lost frames would exceed the
+ *	buffer size. If just limiting the aggregate size, this would be
+ *	possible with a buf_size of 8:
+ *	 - TX: 1.....7
+ *	 - RX:  2....7 (lost frame #1)
+ *	 - TX:        8..1...
+ *	which is invalid since #1 was now re-transmitted well past the
+ *	buffer size of 8. Correct ways to retransmit #1 would be:
+ *	 - TX:       1 or 18 or 81
+ *	Even "189" would be wrong since 1 could be lost again.
+ *
+ *	Returns a negative error code on failure.
+ *	The callback can sleep.
+ *
+ * @get_survey: Return per-channel survey information
+ *
+ * @rfkill_poll: Poll rfkill hardware state. If you need this, you also
+ *	need to set wiphy->rfkill_poll to %true before registration,
+ *	and need to call wiphy_rfkill_set_hw_state() in the callback.
+ *	The callback can sleep.
+ *
+ * @set_coverage_class: Set slot time for given coverage class as specified
+ *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
+ *	accordingly. This callback is not required and may sleep.
+ *
+ * @testmode_cmd: Implement a cfg80211 test mode command.
+ *	The callback can sleep.
+ * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
+ *
+ * @flush: Flush all pending frames from the hardware queue, making sure
+ *	that the hardware queues are empty. If the parameter @drop is set
+ *	to %true, pending frames may be dropped. The callback can sleep.
+ *
+ * @channel_switch: Drivers that need (or want) to offload the channel
+ *	switch operation for CSAs received from the AP may implement this
+ *	callback. They must then call ieee80211_chswitch_done() to indicate
+ *	completion of the channel switch.
+ *
+ * @napi_poll: Poll Rx queue for incoming data frames.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @remain_on_channel: Starts an off-channel period on the given channel, must
+ *	call back to ieee80211_ready_on_channel() when on that channel. Note
+ *	that normal channel traffic is not stopped as this is intended for hw
+ *	offload. Frames to transmit on the off-channel channel are transmitted
+ *	normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ *	duration (which will always be non-zero) expires, the driver must call
+ *	ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
+ *	aborted before it expires. This callback may sleep.
+ *
+ * @set_ringparam: Set tx and rx ring sizes.
+ *
+ * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tx_frames_pending: Check if there is any pending frame in the hardware
+ *	queues before entering power save.
+ *
+ * @set_bitrate_mask: Set a mask of rates to be used for rate control selection
+ *	when transmitting a frame. Currently only legacy rates are handled.
+ *	The callback can sleep.
+ * @rssi_callback: Notify driver when the average RSSI goes above/below
+ *	thresholds that were registered previously. The callback can sleep.
+ *
+ * @release_buffered_frames: Release buffered frames according to the given
+ *	parameters. In the case where the driver buffers some frames for
+ *	sleeping stations mac80211 will use this callback to tell the driver
+ *	to release some frames, either for PS-poll or uAPSD.
+ *	Note that if the @more_data paramter is %false the driver must check
+ *	if there are more frames on the given TIDs, and if there are more than
+ *	the frames being released then it must still set the more-data bit in
+ *	the frame. If the @more_data parameter is %true, then of course the
+ *	more-data bit must always be set.
+ *	The @tids parameter tells the driver which TIDs to release frames
+ *	from, for PS-poll it will always have only a single bit set.
+ *	In the case this is used for a PS-poll initiated release, the
+ *	@num_frames parameter will always be 1 so code can be shared. In
+ *	this case the driver must also set %IEEE80211_TX_STATUS_EOSP flag
+ *	on the TX status (and must report TX status) so that the PS-poll
+ *	period is properly ended. This is used to avoid sending multiple
+ *	responses for a retried PS-poll frame.
+ *	In the case this is used for uAPSD, the @num_frames parameter may be
+ *	bigger than one, but the driver may send fewer frames (it must send
+ *	at least one, however). In this case it is also responsible for
+ *	setting the EOSP flag in the QoS header of the frames. Also, when the
+ *	service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
+ *	on the last frame in the SP. Alternatively, it may call the function
+ *	ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ *	This callback must be atomic.
+ * @allow_buffered_frames: Prepare device to allow the given number of frames
+ *	to go out to the given station. The frames will be sent by mac80211
+ *	via the usual TX path after this call. The TX information for frames
+ *	released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set
+ *	and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case
+ *	frames from multiple TIDs are released and the driver might reorder
+ *	them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
+ *	on the last frame and clear it on all others and also handle the EOSP
+ *	bit in the QoS header correctly. Alternatively, it can also call the
+ *	ieee80211_sta_eosp_irqsafe() function.
+ *	The @tids parameter is a bitmap and tells the driver which TIDs the
+ *	frames will be on; it will at most have two bits set.
+ *	This callback must be atomic.
+ */
+struct ieee80211_ops {
+	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
+	int (*start)(struct ieee80211_hw *hw);
+	void (*stop)(struct ieee80211_hw *hw);
+#ifdef CONFIG_PM
+	int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
+	int (*resume)(struct ieee80211_hw *hw);
+#endif
+	int (*add_interface)(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif);
+	int (*change_interface)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				enum nl80211_iftype new_type, bool p2p);
+	void (*remove_interface)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif);
+	int (*config)(struct ieee80211_hw *hw, u32 changed);
+	void (*bss_info_changed)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_bss_conf *info,
+				 u32 changed);
+
+	int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       const u8 *bssid, enum ieee80211_tx_sync_type type);
+	void (*finish_tx_sync)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       const u8 *bssid,
+			       enum ieee80211_tx_sync_type type);
+
+	u64 (*prepare_multicast)(struct ieee80211_hw *hw,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
+				 struct netdev_hw_addr_list *mc_list);
+#else
+				 int mc_count, struct dev_addr_list *mc_list);
+#endif
+	void (*configure_filter)(struct ieee80211_hw *hw,
+				 unsigned int changed_flags,
+				 unsigned int *total_flags,
+				 u64 multicast);
+	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+		       bool set);
+	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		       struct ieee80211_key_conf *key);
+	void (*update_tkip_key)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *conf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key);
+	void (*set_rekey_data)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct cfg80211_gtk_rekey_data *data);
+	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct cfg80211_scan_request *req);
+	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif);
+	int (*sched_scan_start)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct cfg80211_sched_scan_request *req,
+				struct ieee80211_sched_scan_ies *ies);
+	void (*sched_scan_stop)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif);
+	void (*sw_scan_start)(struct ieee80211_hw *hw);
+	void (*sw_scan_complete)(struct ieee80211_hw *hw);
+	int (*get_stats)(struct ieee80211_hw *hw,
+			 struct ieee80211_low_level_stats *stats);
+	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
+			     u32 *iv32, u16 *iv16);
+	int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
+	int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
+	int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct ieee80211_sta *sta);
+	int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			  struct ieee80211_sta *sta);
+	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			enum sta_notify_cmd, struct ieee80211_sta *sta);
+	int (*conf_tx)(struct ieee80211_hw *hw,
+		       struct ieee80211_vif *vif, u16 queue,
+		       const struct ieee80211_tx_queue_params *params);
+	u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			u64 tsf);
+	void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	int (*tx_last_beacon)(struct ieee80211_hw *hw);
+	int (*ampdu_action)(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    enum ieee80211_ampdu_mlme_action action,
+			    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+			    u8 buf_size);
+	int (*get_survey)(struct ieee80211_hw *hw, int idx,
+		struct survey_info *survey);
+	void (*rfkill_poll)(struct ieee80211_hw *hw);
+	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
+#ifdef CONFIG_NL80211_TESTMODE
+	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+	int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb,
+			     struct netlink_callback *cb,
+			     void *data, int len);
+#endif
+	void (*flush)(struct ieee80211_hw *hw, bool drop);
+	void (*channel_switch)(struct ieee80211_hw *hw,
+			       struct ieee80211_channel_switch *ch_switch);
+	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
+	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
+	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
+
+	int (*remain_on_channel)(struct ieee80211_hw *hw,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type,
+				 int duration);
+	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
+	int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
+	void (*get_ringparam)(struct ieee80211_hw *hw,
+			      u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+	bool (*tx_frames_pending)(struct ieee80211_hw *hw);
+	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+				const struct cfg80211_bitrate_mask *mask);
+	void (*rssi_callback)(struct ieee80211_hw *hw,
+			      enum ieee80211_rssi_event rssi_event);
+
+	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
+				      struct ieee80211_sta *sta,
+				      u16 tids, int num_frames,
+				      enum ieee80211_frame_release_type reason,
+				      bool more_data);
+	void (*release_buffered_frames)(struct ieee80211_hw *hw,
+					struct ieee80211_sta *sta,
+					u16 tids, int num_frames,
+					enum ieee80211_frame_release_type reason,
+					bool more_data);
+};
+
+/**
+ * ieee80211_alloc_hw -  Allocate a new hardware device
+ *
+ * This must be called once for each hardware device. The returned pointer
+ * must be used to refer to this device when calling other functions.
+ * mac80211 allocates a private data area for the driver pointed to by
+ * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv_data_len.
+ *
+ * @priv_data_len: length of private data
+ * @ops: callbacks for this device
+ */
+struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
+					const struct ieee80211_ops *ops);
+
+/**
+ * ieee80211_register_hw - Register hardware device
+ *
+ * You must call this function before any other functions in
+ * mac80211. Note that before a hardware can be registered, you
+ * need to fill the contained wiphy's information.
+ *
+ * @hw: the device to register as returned by ieee80211_alloc_hw()
+ */
+int ieee80211_register_hw(struct ieee80211_hw *hw);
+
+/**
+ * struct ieee80211_tpt_blink - throughput blink description
+ * @throughput: throughput in Kbit/sec
+ * @blink_time: blink time in milliseconds
+ *	(full cycle, ie. one off + one on period)
+ */
+struct ieee80211_tpt_blink {
+	int throughput;
+	int blink_time;
+};
+
+/**
+ * enum ieee80211_tpt_led_trigger_flags - throughput trigger flags
+ * @IEEE80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio
+ * @IEEE80211_TPT_LEDTRIG_FL_WORK: enable blinking when working
+ * @IEEE80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one
+ *	interface is connected in some way, including being an AP
+ */
+enum ieee80211_tpt_led_trigger_flags {
+	IEEE80211_TPT_LEDTRIG_FL_RADIO		= BIT(0),
+	IEEE80211_TPT_LEDTRIG_FL_WORK		= BIT(1),
+	IEEE80211_TPT_LEDTRIG_FL_CONNECTED	= BIT(2),
+};
+
+#ifdef CONFIG_MAC80211_LEDS
+extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_create_tpt_led_trigger(
+				struct ieee80211_hw *hw, unsigned int flags,
+				const struct ieee80211_tpt_blink *blink_table,
+				unsigned int blink_table_len);
+#endif
+/**
+ * ieee80211_get_tx_led_name - get name of TX LED
+ *
+ * mac80211 creates a transmit LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_tx_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_rx_led_name - get name of RX LED
+ *
+ * mac80211 creates a receive LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_rx_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_assoc_led_name - get name of association LED
+ *
+ * mac80211 creates a association LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_assoc_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_radio_led_name - get name of radio LED
+ *
+ * mac80211 creates a radio change LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_radio_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_create_tpt_led_trigger - create throughput LED trigger
+ * @hw: the hardware to create the trigger for
+ * @flags: trigger flags, see &enum ieee80211_tpt_led_trigger_flags
+ * @blink_table: the blink table -- needs to be ordered by throughput
+ * @blink_table_len: size of the blink table
+ *
+ * This function returns %NULL (in case of error, or if no LED
+ * triggers are configured) or the name of the new trigger.
+ * This function must be called before ieee80211_register_hw().
+ */
+static inline char *
+ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
+				 const struct ieee80211_tpt_blink *blink_table,
+				 unsigned int blink_table_len)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_create_tpt_led_trigger(hw, flags, blink_table,
+						  blink_table_len);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_unregister_hw - Unregister a hardware device
+ *
+ * This function instructs mac80211 to free allocated resources
+ * and unregister netdevices from the networking subsystem.
+ *
+ * @hw: the hardware to unregister
+ */
+void ieee80211_unregister_hw(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_free_hw - free hardware descriptor
+ *
+ * This function frees everything that was allocated, including the
+ * private data for the driver. You must call ieee80211_unregister_hw()
+ * before calling this function.
+ *
+ * @hw: the hardware to free
+ */
+void ieee80211_free_hw(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_schedule - schedule NAPI poll
+ *
+ * Use this function to schedule NAPI polling on a device.
+ *
+ * @hw: the hardware to start polling
+ */
+void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_complete - complete NAPI polling
+ *
+ * Use this function to finish NAPI polling on a device.
+ *
+ * @hw: the hardware to stop polling
+ */
+void ieee80211_napi_complete(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_rx - receive frame
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header. In case of a
+ * paged @skb is used, the driver is recommended to put the ieee80211
+ * header of the frame on the linear part of the @skb to avoid memory
+ * allocation and/or memcpy by the stack.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware.
+ *
+ * In process context use instead ieee80211_rx_ni().
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * ieee80211_rx_irqsafe - receive frame
+ *
+ * Like ieee80211_rx() but can be called in IRQ context
+ * (internally defers to a tasklet.)
+ *
+ * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
+ * be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * ieee80211_rx_ni - receive frame (in process context)
+ *
+ * Like ieee80211_rx() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
+ * not be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
+				   struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_rx(hw, skb);
+	local_bh_enable();
+}
+
+/**
+ * ieee80211_sta_ps_transition - PS transition for connected sta
+ *
+ * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS
+ * flag set, use this function to inform mac80211 about a connected station
+ * entering/leaving PS mode.
+ *
+ * This function may not be called in IRQ context or with softirqs enabled.
+ *
+ * Calls to this function for a single hardware must be synchronized against
+ * each other.
+ *
+ * The function returns -EINVAL when the requested PS mode is already set.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
+
+/**
+ * ieee80211_sta_ps_transition_ni - PS transition for connected sta
+ *                                  (in process context)
+ *
+ * Like ieee80211_sta_ps_transition() but can be called in process context
+ * (internally disables bottom halves). Concurrent call restriction still
+ * applies.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
+						  bool start)
+{
+	int ret;
+
+	local_bh_disable();
+	ret = ieee80211_sta_ps_transition(sta, start);
+	local_bh_enable();
+
+	return ret;
+}
+
+/*
+ * The TX headroom reserved by mac80211 for its own tx_status functions.
+ * This is enough for the radiotap header.
+ */
+#define IEEE80211_TX_STATUS_HEADROOM	14
+
+/**
+ * ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames
+ * @sta: &struct ieee80211_sta pointer for the sleeping station
+ * @tid: the TID that has buffered frames
+ * @buffered: indicates whether or not frames are buffered for this TID
+ *
+ * If a driver buffers frames for a powersave station instead of passing
+ * them back to mac80211 for retransmission, the station may still need
+ * to be told that there are buffered frames via the TIM bit.
+ *
+ * This function informs mac80211 whether or not there are frames that are
+ * buffered in the driver for a given TID; mac80211 can then use this data
+ * to set the TIM bit (NOTE: This may call back into the driver's set_tim
+ * call! Beware of the locking!)
+ *
+ * If all frames are released to the station (due to PS-poll or uAPSD)
+ * then the driver needs to inform mac80211 that there no longer are
+ * frames buffered. However, when the station wakes up mac80211 assumes
+ * that all buffered frames will be transmitted and clears this data,
+ * drivers need to make sure they inform mac80211 about all buffered
+ * frames on the sleep transition (sta_notify() with %STA_NOTIFY_SLEEP).
+ *
+ * Note that technically mac80211 only needs to know this per AC, not per
+ * TID, but since driver buffering will inevitably happen per TID (since
+ * it is related to aggregation) it is easier to make mac80211 map the
+ * TID to the AC as required instead of keeping track in all drivers that
+ * use this API.
+ */
+void ieee80211_sta_set_buffered(struct ieee80211_sta *sta,
+				u8 tid, bool buffered);
+
+/**
+ * ieee80211_tx_status - transmit status callback
+ *
+ * Call this function for all transmitted frames after they have been
+ * transmitted. It is permissible to not call this function for
+ * multicast frames but this can affect statistics.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls
+ * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status(struct ieee80211_hw *hw,
+			 struct sk_buff *skb);
+
+/**
+ * ieee80211_tx_status_ni - transmit status callback (in process context)
+ *
+ * Like ieee80211_tx_status() but can be called in process context.
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_irqsafe() may not be mixed
+ * for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+					  struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_tx_status(hw, skb);
+	local_bh_enable();
+}
+
+/**
+ * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
+ *
+ * Like ieee80211_tx_status() but can be called in IRQ context
+ * (internally defers to a tasklet.)
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_ni() may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+				 struct sk_buff *skb);
+
+/**
+ * ieee80211_report_low_ack - report non-responding station
+ *
+ * When operating in AP-mode, call this function to report a non-responding
+ * connected STA.
+ *
+ * @sta: the non-responding connected sta
+ * @num_packets: number of packets sent to @sta without a response
+ */
+void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+
+/**
+ * ieee80211_beacon_get_tim - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @tim_offset: pointer to variable that will receive the TIM IE offset.
+ *	Set to 0 if invalid (in non-AP modes).
+ * @tim_length: pointer to variable that will receive the TIM IE length,
+ *	(including the ID and length bytes!).
+ *	Set to 0 if invalid (in non-AP modes).
+ *
+ * If the driver implements beaconing modes, it must use this function to
+ * obtain the beacon frame/template.
+ *
+ * If the beacon frames are generated by the host system (i.e., not in
+ * hardware/firmware), the driver uses this function to get each beacon
+ * frame from mac80211 -- it is responsible for calling this function
+ * before the beacon is needed (e.g. based on hardware interrupt).
+ *
+ * If the beacon frames are generated by the device, then the driver
+ * must use the returned beacon as the template and change the TIM IE
+ * according to the current DTIM parameters/TIM bitmap.
+ *
+ * The driver is responsible for freeing the returned skb.
+ */
+struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 u16 *tim_offset, u16 *tim_length);
+
+/**
+ * ieee80211_beacon_get - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * See ieee80211_beacon_get_tim().
+ */
+static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
+						   struct ieee80211_vif *vif)
+{
+	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+}
+
+/**
+ * ieee80211_proberesp_get - retrieve a Probe Response template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Response template which can, for example, be uploaded to
+ * hardware. The destination address should be set by the caller.
+ *
+ * Can only be called in AP mode.
+ */
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_pspoll_get - retrieve a PS Poll template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a PS Poll a template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * AID, BSSID and MAC address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit.
+ */
+struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_nullfunc_get - retrieve a nullfunc template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Nullfunc template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * BSSID and address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ */
+struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ssid: SSID buffer
+ * @ssid_len: length of SSID
+ * @ie: buffer containing all IEs except SSID for the template
+ * @ie_len: length of the IE buffer
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware.
+ */
+struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       const u8 *ssid, size_t ssid_len,
+				       const u8 *ie, size_t ie_len);
+
+/**
+ * ieee80211_rts_get - RTS frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame: pointer to the frame that is going to be protected by the RTS.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @rts: The buffer where to store the RTS frame.
+ *
+ * If the RTS frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next RTS frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and RTS frame is needed.
+ */
+void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       const void *frame, size_t frame_len,
+		       const struct ieee80211_tx_info *frame_txctl,
+		       struct ieee80211_rts *rts);
+
+/**
+ * ieee80211_rts_duration - Get the duration field for an RTS frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame that is going to be protected by the RTS.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ *
+ * If the RTS is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif, size_t frame_len,
+			      const struct ieee80211_tx_info *frame_txctl);
+
+/**
+ * ieee80211_ctstoself_get - CTS-to-self frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame: pointer to the frame that is going to be protected by the CTS-to-self.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @cts: The buffer where to store the CTS-to-self frame.
+ *
+ * If the CTS-to-self frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next CTS-to-self frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and CTS-to-self frame is needed.
+ */
+void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     const void *frame, size_t frame_len,
+			     const struct ieee80211_tx_info *frame_txctl,
+			     struct ieee80211_cts *cts);
+
+/**
+ * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ *
+ * If the CTS-to-self is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    size_t frame_len,
+				    const struct ieee80211_tx_info *frame_txctl);
+
+/**
+ * ieee80211_generic_frame_duration - Calculate the duration field for a frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame.
+ * @rate: the rate at which the frame is going to be transmitted.
+ *
+ * Calculate the duration field of some generic frame, given its
+ * length and transmission rate (in 100kbps).
+ */
+__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif,
+					size_t frame_len,
+					struct ieee80211_rate *rate);
+
+/**
+ * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Function for accessing buffered broadcast and multicast frames. If
+ * hardware/firmware does not implement buffering of broadcast/multicast
+ * frames when power saving is used, 802.11 code buffers them in the host
+ * memory. The low-level driver uses this function to fetch next buffered
+ * frame. In most cases, this is used when generating beacon frame. This
+ * function returns a pointer to the next buffered skb or NULL if no more
+ * buffered frames are available.
+ *
+ * Note: buffered frames are returned only after DTIM beacon frame was
+ * generated with ieee80211_beacon_get() and the low-level driver must thus
+ * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns
+ * NULL if the previous generated beacon was not DTIM, so the low-level driver
+ * does not need to check for DTIM beacons separately and should be able to
+ * use common code for all beacons.
+ */
+struct sk_buff *
+ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_get_tkip_p1k_iv - get a TKIP phase 1 key for IV32
+ *
+ * This function returns the TKIP phase 1 key for the given IV32.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @iv32: IV32 to get the P1K for
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf,
+			       u32 iv32, u16 *p1k);
+
+/**
+ * ieee80211_get_tkip_p1k - get a TKIP phase 1 key
+ *
+ * This function returns the TKIP phase 1 key for the IV32 taken
+ * from the given packet.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @skb: the packet to take the IV32 value from that will be encrypted
+ *	with this P1K
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+static inline void ieee80211_get_tkip_p1k(struct ieee80211_key_conf *keyconf,
+					  struct sk_buff *skb, u16 *p1k)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control);
+	u32 iv32 = get_unaligned_le32(&data[4]);
+
+	ieee80211_get_tkip_p1k_iv(keyconf, iv32, p1k);
+}
+
+/**
+ * ieee80211_get_tkip_rx_p1k - get a TKIP phase 1 key for RX
+ *
+ * This function returns the TKIP phase 1 key for the given IV32
+ * and transmitter address.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @ta: TA that will be used with the key
+ * @iv32: IV32 to get the P1K for
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+void ieee80211_get_tkip_rx_p1k(struct ieee80211_key_conf *keyconf,
+			       const u8 *ta, u32 iv32, u16 *p1k);
+
+/**
+ * ieee80211_get_tkip_p2k - get a TKIP phase 2 key
+ *
+ * This function computes the TKIP RC4 key for the IV values
+ * in the packet.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @skb: the packet to take the IV32/IV16 values from that will be
+ *	encrypted with this key
+ * @p2k: a buffer to which the key will be written, 16 bytes
+ */
+void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
+			    struct sk_buff *skb, u8 *p2k);
+
+/**
+ * struct ieee80211_key_seq - key sequence counter
+ *
+ * @tkip: TKIP data, containing IV32 and IV16 in host byte order
+ * @ccmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @aes_cmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ */
+struct ieee80211_key_seq {
+	union {
+		struct {
+			u32 iv32;
+			u16 iv16;
+		} tkip;
+		struct {
+			u8 pn[6];
+		} ccmp;
+		struct {
+			u8 pn[6];
+		} aes_cmac;
+	};
+};
+
+/**
+ * ieee80211_get_key_tx_seq - get key TX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @seq: buffer to receive the sequence data
+ *
+ * This function allows a driver to retrieve the current TX IV/PN
+ * for the given key. It must not be called if IV generation is
+ * offloaded to the device.
+ *
+ * Note that this function may only be called when no TX processing
+ * can be done concurrently, for example when queues are stopped
+ * and the stop has been synchronized.
+ */
+void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf,
+			      struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_get_key_rx_seq - get key RX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @tid: The TID, or -1 for the management frame value (CCMP only);
+ *	the value on TID 0 is also used for non-QoS frames. For
+ *	CMAC, only TID 0 is valid.
+ * @seq: buffer to receive the sequence data
+ *
+ * This function allows a driver to retrieve the current RX IV/PNs
+ * for the given key. It must not be called if IV checking is done
+ * by the device and not by mac80211.
+ *
+ * Note that this function may only be called when no RX processing
+ * can be done concurrently.
+ */
+void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf,
+			      int tid, struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying
+ * @vif: virtual interface the rekeying was done on
+ * @bssid: The BSSID of the AP, for checking association
+ * @replay_ctr: the new replay counter after GTK rekeying
+ * @gfp: allocation flags
+ */
+void ieee80211_gtk_rekey_notify(struct ieee80211_vif *vif, const u8 *bssid,
+				const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * ieee80211_wake_queue - wake specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_stop_queue - stop specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_queue_stopped - test status of the queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+
+int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_stop_queues - stop all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_wake_queues - wake all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_scan_completed - completed hardware scan
+ *
+ * When hardware scan offload is used (i.e. the hw_scan() callback is
+ * assigned) this function needs to be called by the driver to notify
+ * mac80211 that the scan finished. This function can be called from
+ * any context, including hardirq context.
+ *
+ * @hw: the hardware that finished the scan
+ * @aborted: set to true if scan was aborted
+ */
+void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
+
+/**
+ * ieee80211_sched_scan_results - got results from scheduled scan
+ *
+ * When a scheduled scan is running, this function needs to be called by the
+ * driver whenever there are new scan results available.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ *
+ * When a scheduled scan is running, this function can be called by
+ * the driver if it needs to stop the scan to perform another task.
+ * Usual scenarios are drivers that cannot continue the scheduled scan
+ * while associating, for instance.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_iterate_active_interfaces - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
+ * Does not iterate over a new interface during add_interface()
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
+					 void (*iterator)(void *data, u8 *mac,
+						struct ieee80211_vif *vif),
+					 void *data);
+
+/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ * Does not iterate over a new interface during add_interface()
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+						void (*iterator)(void *data,
+						    u8 *mac,
+						    struct ieee80211_vif *vif),
+						void *data);
+
+/**
+ * ieee80211_queue_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
+ * This helper ensures drivers are not queueing work when they should not be.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @work: the work we want to add onto the mac80211 workqueue
+ */
+void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work);
+
+/**
+ * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to queue delayed work onto the mac80211
+ * workqueue.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @dwork: delayable work to queue onto the mac80211 workqueue
+ * @delay: number of jiffies to wait before queueing
+ */
+void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
+				  struct delayed_work *dwork,
+				  unsigned long delay);
+
+/**
+ * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
+ * @sta: the station for which to start a BA session
+ * @tid: the TID to BA on.
+ * @timeout: session timeout value (in TUs)
+ *
+ * Return: success if addBA request was sent, failure otherwise
+ *
+ * Although mac80211/low level driver/user space application can estimate
+ * the need to start aggregation on a certain RA/TID, the session level
+ * will be managed by the mac80211.
+ */
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
+				  u16 timeout);
+
+/**
+ * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * @ra: receiver address of the BA session recipient.
+ * @tid: the TID to BA on.
+ *
+ * This function must be called by low level driver once it has
+ * finished with preparations for the BA session. It can be called
+ * from any context.
+ */
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+				      u16 tid);
+
+/**
+ * ieee80211_stop_tx_ba_session - Stop a Block Ack session.
+ * @sta: the station whose BA session to stop
+ * @tid: the TID to stop BA.
+ *
+ * Return: negative error if the TID is invalid, or no aggregation active
+ *
+ * Although mac80211/low level driver/user space application can estimate
+ * the need to stop aggregation on a certain RA/TID, the session level
+ * will be managed by the mac80211.
+ */
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
+
+/**
+ * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * @ra: receiver address of the BA session recipient.
+ * @tid: the desired TID to BA on.
+ *
+ * This function must be called by low level driver once it has
+ * finished with preparations for the BA session tear down. It
+ * can be called from any context.
+ */
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+				     u16 tid);
+
+/**
+ * ieee80211_find_sta - find a station
+ *
+ * @vif: virtual interface to look for station on
+ * @addr: station's address
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ */
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
+					 const u8 *addr);
+
+/**
+ * ieee80211_find_sta_by_ifaddr - find a station on hardware
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @addr: remote station's address
+ * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ *
+ * NOTE: You may pass NULL for localaddr, but then you will just get
+ *      the first STA that matches the remote address 'addr'.
+ *      We can have multiple STA associated with multiple
+ *      logical stations (e.g. consider a station connecting to another
+ *      BSSID on the same AP hardware without disconnecting first).
+ *      In this case, the result of this method with localaddr NULL
+ *      is not reliable.
+ *
+ * DO NOT USE THIS FUNCTION with localaddr NULL if at all possible.
+ */
+struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
+					       const u8 *addr,
+					       const u8 *localaddr);
+
+/**
+ * ieee80211_sta_block_awake - block station from waking up
+ * @hw: the hardware
+ * @pubsta: the station
+ * @block: whether to block or unblock
+ *
+ * Some devices require that all frames that are on the queues
+ * for a specific station that went to sleep are flushed before
+ * a poll response or frames after the station woke up can be
+ * delivered to that it. Note that such frames must be rejected
+ * by the driver as filtered, with the appropriate status flag.
+ *
+ * This function allows implementing this mode in a race-free
+ * manner.
+ *
+ * To do this, a driver must keep track of the number of frames
+ * still enqueued for a specific station. If this number is not
+ * zero when the station goes to sleep, the driver must call
+ * this function to force mac80211 to consider the station to
+ * be asleep regardless of the station's actual state. Once the
+ * number of outstanding frames reaches zero, the driver must
+ * call this function again to unblock the station. That will
+ * cause mac80211 to be able to send ps-poll responses, and if
+ * the station queried in the meantime then frames will also
+ * be sent out as a result of this. Additionally, the driver
+ * will be notified that the station woke up some time after
+ * it is unblocked, regardless of whether the station actually
+ * woke up while blocked or not.
+ */
+void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *pubsta, bool block);
+
+/**
+ * ieee80211_sta_eosp - notify mac80211 about end of SP
+ * @pubsta: the station
+ *
+ * When a device transmits frames in a way that it can't tell
+ * mac80211 in the TX status about the EOSP, it must clear the
+ * %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
+ * This applies for PS-Poll as well as uAPSD.
+ *
+ * Note that there is no non-_irqsafe version right now as
+ * it wasn't needed, but just like _tx_status() and _rx()
+ * must not be mixed in irqsafe/non-irqsafe versions, this
+ * function must not be mixed with those either. Use the
+ * all irqsafe, or all non-irqsafe, don't mix! If you need
+ * the non-irqsafe version of this, you need to add it.
+ */
+void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+
+/**
+ * ieee80211_iter_keys - iterate keys programmed into the device
+ * @hw: pointer obtained from ieee80211_alloc_hw()
+ * @vif: virtual interface to iterate, may be %NULL for all
+ * @iter: iterator function that will be called for each key
+ * @iter_data: custom data to pass to the iterator function
+ *
+ * This function can be used to iterate all the keys known to
+ * mac80211, even those that weren't previously programmed into
+ * the device. This is intended for use in WoWLAN if the device
+ * needs reprogramming of the keys during suspend. Note that due
+ * to locking reasons, it is also only safe to call this at few
+ * spots since it must hold the RTNL and be able to sleep.
+ *
+ * The order in which the keys are iterated matches the order
+ * in which they were originally installed and handed to the
+ * set_key callback.
+ */
+void ieee80211_iter_keys(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif,
+			 void (*iter)(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct ieee80211_sta *sta,
+				      struct ieee80211_key_conf *key,
+				      void *data),
+			 void *iter_data);
+
+/**
+ * ieee80211_ap_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware. The template is filled with bssid, ssid and supported rate
+ * information. This function must only be called from within the
+ * .bss_info_changed callback function and only in managed mode. The function
+ * is only useful when the interface is associated, otherwise it will return
+ * NULL.
+ */
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_beacon_loss - inform hardware does not receive beacons
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and
+ * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the
+ * hardware is not receiving beacons with this function.
+ */
+void ieee80211_beacon_loss(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_connection_loss - inform hardware has lost connection to the AP
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and
+ * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
+ * needs to inform if the connection to the AP has been lost.
+ *
+ * This function will cause immediate change to disassociated state,
+ * without connection recovery attempts.
+ */
+void ieee80211_connection_loss(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_resume_disconnect - disconnect from AP after resume
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after resume.
+ * Drivers can use this after WoWLAN if they know that the
+ * connection cannot be kept up, for example because keys were
+ * used while the device was asleep but the replay counters or
+ * similar cannot be retrieved from the device during resume.
+ *
+ * Note that due to implementation issues, if the driver uses
+ * the reconfiguration functionality during resume the interface
+ * will still be added as associated first during resume and then
+ * disconnect normally later.
+ *
+ * This function can only be called from the resume callback and
+ * the driver must not be holding any of its own locks while it
+ * calls this function, or at least not any locks it needs in the
+ * key configuration paths (if it supports HW crypto).
+ */
+void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Some hardware require full power save to manage simultaneous BT traffic
+ * on the WLAN frequency. Full PSM is required periodically, whenever there are
+ * burst of BT traffic. The hardware gets information of BT traffic via
+ * hardware co-existence lines, and consequentially requests mac80211 to
+ * (temporarily) enter full psm.
+ * This function will only temporarily disable dynamic PS, not enable PSM if
+ * it was not already enabled.
+ * The driver must make sure to re-enable dynamic PS using
+ * ieee80211_enable_dyn_ps() if the driver has disabled it.
+ *
+ */
+void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * This function restores dynamic PS after being temporarily disabled via
+ * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
+ * be coupled with an eventual call to this function.
+ *
+ */
+void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
+ *	rssi threshold triggered
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @rssi_event: the RSSI trigger event type
+ * @gfp: context flags
+ *
+ * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * monitoring is configured with an rssi threshold, the driver will inform
+ * whenever the rssi level reaches the threshold.
+ */
+void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+			       enum nl80211_cqm_rssi_threshold_event rssi_event,
+			       gfp_t gfp);
+
+/**
+ * ieee80211_get_operstate - get the operstate of the vif
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The driver might need to know the operstate of the net_device
+ * (specifically, whether the link is IF_OPER_UP after resume)
+ */
+unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_chswitch_done - Complete channel switch process
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @success: make the channel switch successful or not
+ *
+ * Complete the channel switch post-process: set the new operational channel
+ * and wake up the suspended queues.
+ */
+void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
+
+/**
+ * ieee80211_request_smps - request SM PS transition
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @smps_mode: new SM PS mode
+ *
+ * This allows the driver to request an SM PS transition in managed
+ * mode. This is useful when the driver has more information than
+ * the stack about possible interference, for example by bluetooth.
+ */
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+			    enum ieee80211_smps_mode smps_mode);
+
+/**
+ * ieee80211_key_removed - disable hw acceleration for key
+ * @key_conf: The key hw acceleration should be disabled for
+ *
+ * This allows drivers to indicate that the given key has been
+ * removed from hardware acceleration, due to a new key that
+ * was added. Don't use this if the key can continue to be used
+ * for TX, if the key restriction is on RX only it is permitted
+ * to keep the key for TX only and not call this function.
+ *
+ * Due to locking constraints, it may only be called during
+ * @set_key. This function must be allowed to sleep, and the
+ * key it tries to disable may still be used until it returns.
+ */
+void ieee80211_key_removed(struct ieee80211_key_conf *key_conf);
+
+/**
+ * ieee80211_ready_on_channel - notification of remain-on-channel start
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_ready_on_channel(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_stop_rx_ba_session - callback to stop existing BA sessions
+ *
+ * in order not to harm the system performance and user experience, the device
+ * may request not to allow any rx ba session and tear down existing rx ba
+ * sessions based on system constraints such as periodic BT activity that needs
+ * to limit wlan activity (eg.sco or a2dp)."
+ * in such cases, the intention is to limit the duration of the rx ppdu and
+ * therefore prevent the peer device to use a-mpdu aggregation.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ba_rx_bitmap: Bit map of open rx ba per tid
+ * @addr: & to bssid mac address
+ */
+void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap,
+				  const u8 *addr);
+
+/**
+ * ieee80211_send_bar - send a BlockAckReq frame
+ *
+ * can be used to flush pending frames from the peer's aggregation reorder
+ * buffer.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ra: the peer's destination address
+ * @tid: the TID of the aggregation session
+ * @ssn: the new starting sequence number for the receiver
+ */
+void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn);
+
+/* Rate control API */
+
+/**
+ * enum rate_control_changed - flags to indicate which parameter changed
+ *
+ * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
+ *	changed, rate control algorithm can update its internal state if needed.
+ */
+enum rate_control_changed {
+	IEEE80211_RC_HT_CHANGED = BIT(0)
+};
+
+/**
+ * struct ieee80211_tx_rate_control - rate control information for/from RC algo
+ *
+ * @hw: The hardware the algorithm is invoked for.
+ * @sband: The band this frame is being transmitted on.
+ * @bss_conf: the current BSS configuration
+ * @reported_rate: The rate control algorithm can fill this in to indicate
+ *	which rate should be reported to userspace as the current rate and
+ *	used for rate calculations in the mesh network.
+ * @rts: whether RTS will be used for this frame because it is longer than the
+ *	RTS threshold
+ * @short_preamble: whether mac80211 will request short-preamble transmission
+ *	if the selected rate supports it
+ * @max_rate_idx: user-requested maximum rate (not MCS for now)
+ *	(deprecated; this will be removed once drivers get updated to use
+ *	rate_idx_mask)
+ * @rate_idx_mask: user-requested rate mask (not MCS for now)
+ * @skb: the skb that will be transmitted, the control information in it needs
+ *	to be filled in
+ * @bss: whether this frame is sent out in AP or IBSS mode
+ */
+struct ieee80211_tx_rate_control {
+	struct ieee80211_hw *hw;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_bss_conf *bss_conf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_rate reported_rate;
+	bool rts, short_preamble;
+	u8 max_rate_idx;
+	u32 rate_idx_mask;
+	bool bss;
+};
+
+struct rate_control_ops {
+	struct module *module;
+	const char *name;
+	void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+	void (*free)(void *priv);
+
+	void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
+	void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta);
+	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
+			    struct ieee80211_sta *sta,
+			    void *priv_sta, u32 changed,
+			    enum nl80211_channel_type oper_chan_type);
+	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
+			 void *priv_sta);
+
+	void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta,
+			  struct sk_buff *skb);
+	void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta,
+			 struct ieee80211_tx_rate_control *txrc);
+
+	void (*add_sta_debugfs)(void *priv, void *priv_sta,
+				struct dentry *dir);
+	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+};
+
+static inline int rate_supported(struct ieee80211_sta *sta,
+				 enum ieee80211_band band,
+				 int index)
+{
+	return (sta == NULL || sta->supp_rates[band] & BIT(index));
+}
+
+/**
+ * rate_control_send_low - helper for drivers for management/no-ack frames
+ *
+ * Rate control algorithms that agree to use the lowest rate to
+ * send management frames and NO_ACK data with the respective hw
+ * retries should use this in the beginning of their mac80211 get_rate
+ * callback. If true is returned the rate control can simply return.
+ * If false is returned we guarantee that sta and sta and priv_sta is
+ * not null.
+ *
+ * Rate control algorithms wishing to do more intelligent selection of
+ * rate for multicast/broadcast frames may choose to not use this.
+ *
+ * @sta: &struct ieee80211_sta pointer to the target destination. Note
+ *	that this may be null.
+ * @priv_sta: private rate control structure. This may be null.
+ * @txrc: rate control information we sholud populate for mac80211.
+ */
+bool rate_control_send_low(struct ieee80211_sta *sta,
+			   void *priv_sta,
+			   struct ieee80211_tx_rate_control *txrc);
+
+
+static inline s8
+rate_lowest_index(struct ieee80211_supported_band *sband,
+		  struct ieee80211_sta *sta)
+{
+	int i;
+
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (rate_supported(sta, sband->band, i))
+			return i;
+
+	/* warn when we cannot find a rate. */
+	WARN_ON_ONCE(1);
+
+	/* and return 0 (the lowest index) */
+	return 0;
+}
+
+static inline
+bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
+			      struct ieee80211_sta *sta)
+{
+	unsigned int i;
+
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (rate_supported(sta, sband->band, i))
+			return true;
+	return false;
+}
+
+int ieee80211_rate_control_register(struct rate_control_ops *ops);
+void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+
+static inline bool
+conf_is_ht20(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT20;
+}
+
+static inline bool
+conf_is_ht40_minus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40MINUS;
+}
+
+static inline bool
+conf_is_ht40_plus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40PLUS;
+}
+
+static inline bool
+conf_is_ht40(struct ieee80211_conf *conf)
+{
+	return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+}
+
+static inline bool
+conf_is_ht(struct ieee80211_conf *conf)
+{
+	return conf->channel_type != NL80211_CHAN_NO_HT;
+}
+
+static inline enum nl80211_iftype
+ieee80211_iftype_p2p(enum nl80211_iftype type, bool p2p)
+{
+	if (p2p) {
+		switch (type) {
+		case NL80211_IFTYPE_STATION:
+			return NL80211_IFTYPE_P2P_CLIENT;
+		case NL80211_IFTYPE_AP:
+			return NL80211_IFTYPE_P2P_GO;
+		default:
+			break;
+		}
+	}
+	return type;
+}
+
+static inline enum nl80211_iftype
+ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
+{
+	return ieee80211_iftype_p2p(vif->type, vif->p2p);
+}
+
+void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
+				   int rssi_min_thold,
+				   int rssi_max_thold);
+
+void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
+
+int ieee80211_add_srates_ie(struct ieee80211_vif *vif, struct sk_buff *skb);
+
+int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
+				struct sk_buff *skb);
+#endif /* MAC80211_H */
diff --git a/include/compat/net/net_namespace.h b/include/compat/net/net_namespace.h
new file mode 100755
index 0000000..0f74944
--- /dev/null
+++ b/include/compat/net/net_namespace.h
@@ -0,0 +1,10 @@
+#ifndef _COMPAT_NET_NET_NAMESPACE_H
+#define _COMPAT_NET_NET_NAMESPACE_H 1
+
+#include <linux/version.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,23))
+#include_next <net/net_namespace.h>
+#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,23)) */
+
+#endif	/* _COMPAT_NET_NET_NAMESPACE_H */
diff --git a/include/compat/net/regulatory.h b/include/compat/net/regulatory.h
new file mode 100755
index 0000000..ebe5fe7
--- /dev/null
+++ b/include/compat/net/regulatory.h
@@ -0,0 +1,116 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009	Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ *	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ *	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ *	can be used by the wireless core to deal with conflicts
+ *	and potentially inform users of which devices specifically
+ *	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ *	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ *	regulatory domain. We have a few special codes:
+ *	00 - World regulatory domain
+ *	99 - built by driver but a specific alpha2 cannot be determined
+ *	98 - result of an intersection between two regulatory domains
+ *	97 - regulatory domain has not yet been configured
+ * @intersect: indicates whether the wireless core should intersect
+ *	the requested regulatory domain with the presently set regulatory
+ *	domain.
+ * @processed: indicates whether or not this requests has already been
+ *	processed. When the last request is processed it means that the
+ *	currently regulatory domain set on cfg80211 is updated from
+ *	CRDA and can be used by other regulatory requests. When a
+ *	the last request is not yet processed we must yield until it
+ *	is processed before processing any new requests.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ *	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ *	indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+	int wiphy_idx;
+	enum nl80211_reg_initiator initiator;
+	char alpha2[2];
+	bool intersect;
+	bool processed;
+	enum environment_cap country_ie_env;
+	struct list_head list;
+};
+
+struct ieee80211_freq_range {
+	u32 start_freq_khz;
+	u32 end_freq_khz;
+	u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+	u32 max_antenna_gain;
+	u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+	struct ieee80211_freq_range freq_range;
+	struct ieee80211_power_rule power_rule;
+	u32 flags;
+};
+
+struct ieee80211_regdomain {
+	u32 n_reg_rules;
+	char alpha2[2];
+	struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{							\
+	.freq_range.start_freq_khz = MHZ_TO_KHZ(start),	\
+	.freq_range.end_freq_khz = MHZ_TO_KHZ(end),	\
+	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw),	\
+	.power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+	.power_rule.max_eirp = DBM_TO_MBM(eirp),	\
+	.flags = reg_flags,				\
+}
+
+#endif